RESUMO
The accessibility and popularity of additive manufacturing (AM) has increased over the past decade. Environmental hazard assessment and safety data sheets for 3D printer feedstocks has lagged technology development. Vat photopolymerization may have unique risks relative to other AM technologies due to mishandling of uncured monomers/oligomer feedstocks and its decreasing cost enabling uninformed residential use. The acute and chronic toxicity of six uncured resins to Ceriodaphnia dubia was explored. Two-day acute toxicity (LC50) ranged from 2.6 to 33 mg/L and inhibition concentrations (IC25) values for reproduction ranged from 0.33 to 16 mg/L. Cleaning and waste management procedures recommended in user guides could be the most hazardous handling scenario as use of isopropyl alcohol increases miscibility and thus the fate, transport and bioavailability of the uncured resins. Residential users may often be poorly informed about potential toxicity and the need for a plan for use, handling, and waste management of uncured resins.
Assuntos
Cladocera , Poluentes Químicos da Água , Animais , Testes de Toxicidade Crônica , Poluentes Químicos da Água/toxicidade , Cladocera/fisiologia , Impressão TridimensionalRESUMO
Rapid and robust sensing of nerve agent (NA) threats is necessary for real-time field detection to facilitate timely countermeasures. Unlike conventional phosphotriesterases employed for biocatalytic NA detection, this work describes the use of a new, green, thermally stable, and biocompatible zirconium metal-organic framework (Zr-MOF) catalyst, MIP-202(Zr). The biomimetic Zr-MOF-based catalytic NA recognition layer was coupled with a solid-contact fluoride ion-selective electrode (F-ISE) transducer, for potentiometric detection of diisopropylfluorophosphate (DFP), a F-containing G-type NA simulant. Catalytic DFP degradation by MIP-202(Zr) was evaluated and compared to the established UiO-66-NH2 catalyst. The efficient catalytic DFP degradation with MIP-202(Zr) at near-neutral pH was validated by 31P NMR and FT-IR spectroscopy and potentiometric F-ISE and pH-ISE measurements. Activation of MIP-202(Zr) using Soxhlet extraction improved the DFP conversion rate and afforded a 2.64-fold improvement in total percent conversion over UiO-66-NH2. The exceptional thermal and storage stability of the MIP-202/F-ISE sensor paves the way toward remote/wearable field detection of G-type NAs in real-world environments. Overall, the green, sustainable, highly scalable, and biocompatible nature of MIP-202(Zr) suggests the unexploited scope of such MOF catalysts for on-body sensing applications toward rapid on-site detection and detoxification of NA threats.
Assuntos
Materiais Biomiméticos/química , Isoflurofato/análise , Estruturas Metalorgânicas/química , Agentes Neurotóxicos/análise , Catálise , Técnicas Eletroquímicas/instrumentação , Técnicas Eletroquímicas/métodos , Fluoretos/análise , Química Verde , Isoflurofato/química , Limite de Detecção , Agentes Neurotóxicos/química , Dispositivos Eletrônicos Vestíveis , Zircônio/químicaRESUMO
The design of bioinspired polymers has long been an area of intense study, however, applications to the design of concrete admixtures for improved materials performance have been relatively unexplored. In this work, we functionalized poly(acrylic acid) (PAA), a simple analogue to polycarboxylate ether admixtures in concrete, with dopamine to form a catechol-bearing polymer (PAA-g-DA). Synthetic routes using hydroxybenzotriazole (HOBt) as an activating agent were examined for their ability in grafting dopamine to the PAA backbone. Previous literature using the traditional coupling reagent 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) to graft dopamine to PAA were found to be inconsistent and the sensitivity of EDC coupling reactions necessitated a search for an alternative. Additionally, HOBt allowed for greater control over per cent functionalization of the backbone, is a simple, robust reaction, and showed potential for scalability. This finding also represents a novel synthetic pathway for amide bond formation between dopamine and PAA. Finally, we performed preliminary adhesion studies of our polymer on rose granite specimens and demonstrated a 56% improvement in the mean adhesion strength over unfunctionalized PAA. These results demonstrate an early study on the potential of PAA-g-DA to be used for improving the bonds within concrete.
RESUMO
The cement produced by the Eastern oyster, Crassostrea virginica, may provide blueprints for waterproof biocompatible adhesives synthesized under benign conditions. The composition of this organic-inorganic composite, and of an organic extract, was characterized by 13C and 1H solid-state NMR and also compared with C. virginica shell and its organic extract. Quantification of the organic fraction by 13C and 1H NMR spectroscopy consistently showed 3 wt % organics in cement, which was higher than the 1.2 wt % in the shell. According to 13C NMR with spectral editing, the organic fraction of cement consisted of 73% protein, 25% polysaccharide, and 2% lipid. The organic acid-insoluble extract from the cement was mostly made up of protein remarkably rich in alanine and glycine. The unusual amino acid content matched the composition of silk-like proteins in the C. virginica or C. gigas genomes, including spidron-1-like and shelk2 previously found to be upregulated at the mantle edge. The corresponding extract from the shell contained 32% glycine and was also enriched in serine but not alanine, which was consistent with a previous wet-chemistry study. The 13C and 1H NMR spin-lattice relaxation in the organic component of cement and the acid-insoluble extract was 4-40 times faster than in the shell and showed pronounced nonexponentiality, indicating a high concentration of persistent radicals in the organic components of cement, in agreement with a prior EPR study. The presence of radicals in the acid-insoluble cement fraction was confirmed by observation of a paramagnetic shift anisotropy. 13C NMR corroborated prior observations that the calcium carbonate in the shell and pseudonacre was mostly calcite, whereas cement had an enhanced aragonite fraction. Surprisingly, 1H-13C NMR indicated that aragonite in cement was more distant from the organic fraction than was calcite. These results help advance our understanding of how oysters achieve adhesion within their wet environment.
RESUMO
Cellulose nanofibrils (CNFs) are high aspect ratio, natural nanomaterials with high mechanical strength-to-weight ratio and promising reinforcing dopants in polymer nanocomposites. In this study, we used CNFs and oxidized CNFs (TOCNFs), prepared by a 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation process, as reinforcing agents in poly(vinylidene fluoride) (PVDF). Using high-shear mixing and doctor blade casting, we prepared free-standing composite films loaded with up to 5 wt % cellulose nanofibrils. For our processing conditions, all CNF/PVDF and TOCNF/PVDF films remain in the same crystalline phase as neat PVDF. In the as-prepared composites, the addition of CNFs on average increases crystallinity, whereas TOCNFs reduces it. Further, addition of CNFs and TOCNFs influences properties such as surface wettability, as well as thermal and mechanical behaviors of the composites. When compared to neat PVDF, the thermal stability of the composites is reduced. With regards to bulk mechanical properties, addition of CNFs or TOCNFs, generally reduces the tensile properties of the composites. However, a small increase (~18%) in the tensile modulus was observed for the 1 wt % TOCNF/PVDF composite. Surface mechanical properties, obtained from nanoindentation, show that the composites have enhanced performance. For the 5 wt % CNF/PVDF composite, the reduced modulus and hardness increased by ~52% and ~22%, whereas for the 3 wt % TOCNF/PVDF sample, the increase was ~23% and ~25% respectively.
RESUMO
Oysters construct extensive reef communities, providing food, protection from storms, and healthy coastlines. We still do not have a clear picture of how these animals attach to surfaces. Efforts described herein provide the first examination of adhesion at the transition from free swimming larvae to initial substrate attachment, through metamorphosis, and on to adulthood. Two different bonding systems were found to coexist. Larvae use an organic, hydrated glue that persists while the animal progresses into the juvenile phase, at which point a very different adhesive emerges. Juveniles bond with an organic-inorganic composite system, positioning the organic component for maximum adhesion by residing between the animal and substrate. Beyond understanding our marine environment, these insights may aid efforts in aquaculture, reef restoration, and adhesive design.
Assuntos
Ostreidae , Adesivos , Envelhecimento , Animais , Cimentação , LarvaRESUMO
Oysters have an impressive ability to overcome difficulties of life within the stressful intertidal zone. These shellfish produce an adhesive for attaching to each other and building protective reef communities. With their reefs often exceeding kilometers in length, oysters play a major role in balancing the health of coastal marine ecosystems. Few details are available to describe oyster adhesive composition or structure. Here several characterization methods were applied to describe the nature of this material. Microscopy studies indicated that the glue is comprised of organic fiber-like and sheet-like structures surrounded by an inorganic matrix. Phospholipids, cross-linking chemistry, and conjugated organics were found to differentiate this adhesive from the shell. Symbiosis in material synthesis could also be present, with oysters incorporating bacterial polysaccharides into their adhesive. Oyster glue shows that an organic-inorganic composite material can provide adhesion, a property especially important when constructing a marine ecosystem.