RESUMO
PURPOSE: Abnormal adherence at functional myofascial interfaces is hypothesized as an important phenomenon in myofascial pain syndrome. This study aimed to investigate the feasibility of MR elastography (MRE)-based slip interface imaging (SII) to visualize and assess myofascial mobility in healthy volunteers. METHODS: SII was used to assess local shear strain at functional myofascial interfaces in the flexor digitorum profundus (FDP) and thighs. In the FDP, MRE was performed at 90 Hz vibration to each index, middle, ring, and little finger. Two thigh MRE scans were performed at 40 Hz with knees flexed and extended. The normalized octahedral shear strain (NOSS) maps were calculated to visualize myofascial slip interfaces. The entropy of the probability distribution of the gradient NOSS was computed for the two knee positions at the intermuscular interface between vastus lateralis and vastus intermedius, around rectus femoris, and between vastus intermedius and vastus medialis. RESULTS: NOSS map depicted distinct functional slip interfaces in the FDP for each finger. Compared to knee flexion, clearer slip interfaces and larger gradient NOSS entropy at the vastus lateralis-vastus intermedius interface were observed during knee extension, where the quadriceps are not passively stretched. This suggests the optimal position for using SII to visualize myofascial slip interface in skeletal muscles is when muscles are not subjected to any additional force. CONCLUSION: The study demonstrated that MRE-based SII can visualize and assess myofascial interface mobility in extremities. The results provide a foundation for investigating the hypothesis that myofascial pain syndrome is characterized by changes in the mobility of myofascial interfaces.
Assuntos
Técnicas de Imagem por Elasticidade , Estudos de Viabilidade , Humanos , Técnicas de Imagem por Elasticidade/métodos , Masculino , Adulto , Feminino , Imageamento por Ressonância Magnética/métodos , Músculo Esquelético/diagnóstico por imagem , Síndromes da Dor Miofascial/diagnóstico por imagem , Síndromes da Dor Miofascial/fisiopatologia , Coxa da Perna/diagnóstico por imagem , Adulto Jovem , Voluntários SaudáveisRESUMO
PURPOSE: The flexor digitorum superficialis (FDS) tendon transfer can be used to restore opposition of the thumb. Several pulley designs have been proposed for this transfer. Gliding resistance is considered to be an important factor influencing the efficiency of the pulley design. Our purpose was to compare the gliding resistance among 4 commonly used pulleys for the FDS oppositional transfer. METHODS: Ten fresh-frozen cadaver specimens were studied. The ring FDS was used as the donor tendon. An oppositional transfer was created using 4 pulley configurations: FDS passed around the flexor carpi ulnaris (a-FCU), FDS passed through a 2.5-cm circumference distally based FCU loop (2.5-FCU), FDS passed through a 3.5-cm circumference distally based FCU loop (3.5-FCU), and FDS passed through a longitudinal split in the FCU tendon (s-FCU). The gliding resistance was measured with the thumb in radial abduction and maximum opposition. RESULTS: In abduction, the average FDS gliding resistance of a-FCU, 2.5-FCU, 3.5-FCU, and s-FCU was 0.66 N (SD, 0.14 N), 0.70 N (SD, 0.14 N), 0.68 N (SD, 0.16 N), and 0.79 N (SD, 0.15 N), respectively. The peak gliding resistance of a-FCU, 2.5-FCU, 3.5-FCU, and s-FCU was 0.75 N (SD, 0.16 N), 0.74 N (SD, 0.15 N), 0.74 N (SD, 0.15 N), and 0.86 N (SD, 0.15 N), respectively. CONCLUSIONS: The average gliding resistance of the s-FCU was found to be significantly higher than that of the a-FCU and 3.5-FCU pulleys. In opposition, there were no differences in average or peak gliding resistance among the different pulley designs. CLINICAL RELEVANCE: In this in vitro cadaveric study, the FDS split pulley produced higher gliding resistance. Consideration of the pulley configuration may improve the overall thumb function by decreasing forces needed to overcome gliding resistance.
Assuntos
Transferência Tendinosa , Tendões , Humanos , Tendões/cirurgia , Dedos , Músculo Esquelético , Polegar/cirurgia , Fenômenos BiomecânicosRESUMO
The intrinsic healing following tendon injury is ideal, in which tendon progenitor cells proliferate and migrate to the injury site to directly bridge or regenerate tendon tissue. However, the mechanism determining why and how those cells are attracted to the injury site for tendon healing is not understood. Since the tenocytes near the injury site go through apoptosis or necrosis following injury, we hypothesized that secretions from injured tenocytes might have biological effects on cell proliferation and migration to enhance tendon healing. Tenocyte apoptosis was induced by 24 h cell starvation. Apoptotic body-rich media (T-ABRM) and apoptotic body-depleted media (T-ABDM) were collected from culture media after centrifuging. Tenocytes and bone marrow-derived stem cells (BMDSCs) were isolated and cultured with the following four media: (1) T-ABRM, (2) T-ABDM, (3) GDF-5, or (4) basal medium with 2% fetal calf serum (FCS). The cell activities and functions were evaluated. Both T-ABRM and T-ABDM treatments significantly stimulated the cell proliferation, migration, and extracellular matrix synthesis for both tenocytes and BMDSCs compared to the control groups (GDF-5 and basal medium). However, cell proliferation, migration, and extracellular matrix production of T-ABRM-treated cells were significantly higher than the T-ABDM, which indicates the apoptotic bodies are critical for cell activities. Our study revealed the possible mechanism of the intrinsic healing of the tendon in which apoptotic bodies, in the process of apoptosis, following tendon injury promote tenocyte and stromal cell proliferation, migration, and production. Future studies should analyze the components of the apoptotic bodies that play this role, and, thus, the targeting of therapeutics can be developed.
Assuntos
Vesículas Extracelulares , Células-Tronco Mesenquimais , Traumatismos dos Tendões , Proliferação de Células , Células Cultivadas , Meios de Cultura/farmacologia , Fator 5 de Diferenciação de Crescimento/farmacologia , Humanos , Células-Tronco Mesenquimais/fisiologia , Soroalbumina Bovina/farmacologia , Traumatismos dos Tendões/terapia , TenócitosRESUMO
BACKGROUND: Loss of active shoulder internal rotation can be very disabling. Several tendon transfers have been described for the management of an irreparable subscapularis (SSC) tear. The purpose of this study was to determine and compare the internal rotation moment arm (IRMA) of the sternal head of the pectoralis major (PM), latissimus dorsi (LD), and teres major (TM) when transferred to different insertion sites to restore shoulder internal rotation with and without reverse shoulder arthroplasty (RSA). METHODS: Six fresh-frozen right hemithoraces were prepared and evaluated using a custom tendon transfer model to determine the IRMA of different tendon transfers using the tendon and joint displacement method. Five tendon-transfer pairs were modeled using a single suture and tested before and after implantation of an RSA (Comprehensive; Zimmer-Biomet, Warsaw, IN, USA): PM to the insertion site of the SSC, LD to the anterior insertion site of the supraspinatus (SSP) tendon on the greater tuberosity, LD to SSC, TM to SSP, and TM to SSC. The SSC was not repaired at the end of the RSA procedure to simulate an SSC deficiency. The PM transfer was passed under the conjoined tendon when tested on the intact shoulder and above the conjoined tendon when tested with an RSA. RESULTS: Tendon transfers were shown to have a significant effect on IRMA. The effect of transferred tendons was significantly affected by the position of the humerus. With the humerus adducted, the IRMA of the TM-SSP (14.1 mm ± 3.1 mm) was significantly greater than the other transfers. With the humerus abducted to 90°, the IRMAs of the LD-SSP (30.0 mm ± 5.4 mm) and TM-SSP (28.4 mm ± 6.6 mm) were significantly greater than the IRMAs of other transfer options. The IRMA of the native shoulder differed significantly from that of the RSA state for all tendon transfers. With the humerus adducted to the side of the body, the IRMA of the RSA PM-SSC transfer was significantly greater than that without an RSA (19.0 mm ± 6.4 mm vs. 7.1 mm ± 0.9 mm), demonstrating increased efficiency for internal rotation in the RSA state. CONCLUSION: Tendon transfers to restore shoulder internal rotation differ in effectiveness and may be affected by arm position and by implantation of a lateralized humerus/lateralized glenoid RSA. The LD potentially results in superior restoration of shoulder internal rotation in a native shoulder (given the risk of nerve compression with the TM transfer) compared with PM and should be considered as a potential tendon transfer to restore internal rotation in selected patients. In combination with a lateralized humerus/lateralized glenoid RSA, the fulcrum provided by the biomechanics of the semiconstrained implant allows the PM transfer to become a more efficient tendon transfer to restore active internal rotation.
Assuntos
Artroplastia do Ombro , Articulação do Ombro , Músculos Superficiais do Dorso , Humanos , Amplitude de Movimento Articular , Rotação , Manguito Rotador/cirurgia , Ombro , Articulação do Ombro/cirurgia , Músculos Superficiais do Dorso/cirurgia , Transferência TendinosaRESUMO
BACKGROUND: The purpose of this study was to determine the effect of fibrinogen concentration on cell viability and migration in a tissue culture tendon healing model. METHODS: Forty-eight canine flexor digitorum profundus tendons were randomly divided into three groups. In each group the tendons were lacerated and repaired augmented with a canine bone marrow stromal cell seeded fibrin interposition patch using either 5 mg/ml fibrinogen and 25 U/ml thrombin (physiological as a control), 40 mg/ml fibrinogen and 250 U/ml thrombin (low adhesive), or 80 mg/ml fibrinogen and 250 U/ml thrombin (high adhesive). The sutured tendons were cultured for two or four weeks. RESULTS: Failure load was not significantly different among the groups. Cell-labeling staining showed that the stromal cells migrated across the gap in the control and low adhesive groups, but there was no cell migration in the high adhesive group at two weeks. CONCLUSION: A high fibrinogen concentration in a fibrin patch or glue may impede early cell migration. LEVEL OF EVIDENCE: Not applicable because this study was a laboratory study.
Assuntos
Procedimentos de Cirurgia Plástica , Traumatismos dos Tendões , Animais , Cães , Movimento Celular , Fibrina , Traumatismos dos Tendões/tratamento farmacológico , Traumatismos dos Tendões/cirurgia , Tendões/cirurgiaRESUMO
INTRODUCTION: Synergies of fingers and wrist motion have been incorporated into therapies for finger flexor tendon injuries to improve repair outcomes. Similar synergistic therapy strategies have not been well documented for the thumb. PURPOSE OF THE STUDY: The purpose of this study was to investigate the extent to which wrist motion enables a synergistic effect at the thumb in a cadaveric model by measuring flexor pollicis longus excursion and calculating the moment arm of this tendon at the wrist joint. STUDY DESIGN: This is a basic science research. METHODS: Eight fresh-frozen cadaveric arms were obtained from our anatomical bequest program. The proximal arm was fixed in neutral pronation/supination position, and motion of the wrist was guided through either flexion/extension or radial/ulnar deviation. Fingers were fixed in extension, thumb interphalangeal and metacarpophalangeal joints were fixed in neutral extension, and the carpometacarpal joint was fixed at 30° palmar abduction. The flexor pollicis longus tendon was exposed proximal to the wrist crease and connected to a rotary potentiometer to measure tendon excursion. Optical markers were attached to the hand to capture kinematics. Wrists were moved from a neutral position over the range of flexion and extension and then from the neutral position through the range of radial to ulnar deviation. Moment arms were calculated. RESULTS: Moment arm calculation indicated that the flexor pollicis longus acts as a wrist flexor over the entire motion range and as a weak radial deviator at ulnarly-deviated positions. CONCLUSIONS: This study provides a mechanistic rationale for passive interphalangeal joint motion in varying wrist positions when treating thumb flexor tendon injuries, with benefits seen primarily for wrist extension.
Assuntos
Amplitude de Movimento Articular/fisiologia , Tendões/fisiologia , Tenodese , Articulação do Punho/fisiologia , Idoso , Idoso de 80 Anos ou mais , Cadáver , Terapia por Exercício , Articulações dos Dedos/fisiologia , Humanos , Pessoa de Meia-Idade , Polegar/fisiologiaRESUMO
PURPOSE: This study aimed to compare the contact areas of Bankart repair with suture anchors placed on the articular surface of the glenoid versus at the rim of the glenoid because it is unclear which technique most effectively restores the footprint after Bankart repair. METHODS: Ten fresh frozen cadaveric shoulders (mean age 70.7 years) were dissected. The attachment site of the capsulolabral complex from the 1 o' clock position to the 6 o'clock position was marked with ink, and the contact area of the anterior-inferior capsulolabral complex on the glenoid neck was measured using imageJ. Bankart lesions were created, and two types of Bankart repair were performed on each specimen. The suture anchors were inserted at the glenoid rim (Rim group) and onto the glenoid articular surface 2 mm from the rim (Surface group). Using pressure-sensitive films, we examined the interface contact area. RESULTS: The Rim group recreated 64.9% of the native surface area, while the Surface group recreated 47.3% of the area. The Rim group recreated significantly greater contact area compared to the Surface group (P = 0.0008). CONCLUSION: The anchor placement to the glenoid rim recreates the footprint of the capsulolabral complex on the anterior inferior glenoid better than the anchor placement onto the articular surface.
Assuntos
Lesões de Bankart , Articulação do Ombro , Idoso , Artroscopia , Cadáver , Humanos , Escápula/cirurgia , Articulação do Ombro/cirurgia , Âncoras de SuturaRESUMO
PURPOSE: Various radial head prosthesis designs are currently in use. Few studies compare different prosthetic designs. We hypothesized that increasing a cementless implant stem's length would reduce stem-bone micromotion, with both short and long neck cuts. We also hypothesized that a minimum stem length might be required for the initial fixation strength of a press-fit implant. METHODS: In 16 fresh-frozen cadaveric elbows (8 pairs), the radial head and neck were cut either 10 or 21 mm below the top of the head. Modular cementless stems were inserted and sequentially lengthened in 5-mm increments. Micromotion under eccentric loading was tested after each incremental change. RESULTS: Incremental lengthening of the prosthetic stem and the amount of neck resection (10-mm cut vs 21-mm cut) both had a significant effect on micromotion. After a 10-mm radial head-neck resection, we observed a significant decrease in micromotion with stem lengths of 25 mm or greater, whereas with 21 mm of neck resection there was no further reduction in micromotion with increased stem length. These differences can be explained, at least in part, by the concept of the cantilever quotient: the ratio of the head-neck length outside the bone to the total length of the implant. CONCLUSIONS: The length of the stem affects the initial stability of press-fit radial head prostheses when the level of head and neck resection is at the minimum (ie, 10 mm) for currently available prosthetic designs. At this resection level, stems 25 mm or greater had significantly higher initial stability, but all stem lengths tested had mean micromotion values within the threshold for bone ingrowth. CLINICAL RELEVANCE: The length of a radial head prosthetic stem affects the initial stability of press-fit radial head prostheses when the level of head and neck resection is at the minimum (ie, 10 mm) for currently available prosthetic designs.
Assuntos
Prótese de Cotovelo , Desenho de Prótese , Ajuste de Prótese , Rádio (Anatomia)/cirurgia , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Cadáver , Feminino , Humanos , MasculinoRESUMO
Substance P (SP), a neurotransmitter released after injury, has been linked to deregulated tissue repair and fibrosis in musculoskeletal tissues and other organs. Although SP inhibition is an effective treatment for nausea, it has not been previously considered as an anti-fibrotic therapy. Although there are extensive medical records of individuals who have used SP antagonists, our analysis of human registry data revealed that patients receiving these antagonists and arthroplasty are exceedingly rare, thus precluding a clinical evaluation of their potential effects in the context of arthrofibrosis. Therefore, we pursued in vivo studies to assess the effect of SP inhibition early after injury on pro-fibrotic gene expression and contractures in an animal model of post-traumatic joint stiffening. Skeletally mature rabbits (n = 24) underwent surgically induced severe joint contracture, while injected with either fosaprepitant (a selective SP antagonist) or saline (control) early after surgery (3, 6, 12, and 24 h). Biomechanical testing revealed that differences in mean contracture angles between the groups were not statistically significant (P = 0.27), suggesting that the drug neither mitigates nor exacerbates joint contracture. However, microarray gene expression analysis revealed that mRNA levels for proteins related to cell signaling, pro-angiogenic, pro-inflammatory, and collagen matrix production were significantly different between control and fosaprepitant treated rabbits (P < 0.05). Hence, our study demonstrates that inhibition of SP alters expression of pro-fibrotic genes in vivo. This finding will motivate future studies to optimize interventions that target SP to reduce the formation of post-traumatic joint contractures.
Assuntos
Contratura/tratamento farmacológico , Perfilação da Expressão Gênica/métodos , Morfolinas/administração & dosagem , Análise de Sequência com Séries de Oligonucleotídeos/métodos , Substância P/antagonistas & inibidores , Animais , Fenômenos Biomecânicos/efeitos dos fármacos , Contratura/genética , Contratura/fisiopatologia , Modelos Animais de Doenças , Articulação do Cotovelo/efeitos dos fármacos , Regulação da Expressão Gênica/efeitos dos fármacos , Redes Reguladoras de Genes/efeitos dos fármacos , Humanos , Injeções , Morfolinas/farmacologia , Coelhos , Lesões no CotoveloRESUMO
INTRODUCTION: Rotator cuff (RC) tears result in muscle atrophy and fat infiltration within the RC muscles. An estimation of muscle quality and deformation, or extensibility, is useful in selecting the most appropriate surgical procedure. We determined if noninvasive quantitative assessment of intramuscular fat using MRI could be used to predict extensibility of the supraspinatus muscle. METHODS: Seventeen cadaveric shoulders were imaged to assess intramuscular fat infiltration. Extensibility and histological evaluations were then performed. RESULTS: Quantitative fat infiltration positively correlated with histological findings and presented a positive correlation with muscle extensibility (r = 0.69; P = 0.002). Extensibility was not significantly different between shoulders graded with a higher fat content versus those with low fat when implementing qualitative methods. DISCUSSION: A noninvasive prediction of whole-muscle extensibility may directly guide pre-operative planning to determine if the torn edge could efficiently cover the original footprint while aiding in postoperative evaluation of RC repair. Muscle Nerve 57: 129-135, 2018.
Assuntos
Tecido Adiposo/diagnóstico por imagem , Músculo Esquelético/diagnóstico por imagem , Tecido Adiposo/patologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Cadáver , Feminino , Humanos , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-Idade , Músculo Esquelético/patologia , Atrofia Muscular/diagnóstico por imagem , Atrofia Muscular/patologia , Manguito Rotador/diagnóstico por imagem , Manguito Rotador/patologia , Lesões do Manguito Rotador/diagnóstico por imagem , Lesões do Manguito Rotador/patologia , Tendões/diagnóstico por imagem , Tendões/patologiaRESUMO
BACKGROUND: Cancer patients are likely to undergo osteoporosis as consequence of hormone manipulation and/or chemotherapy. Little is known about possible increased risk of fracture in this population. The aim of this study was to describe the biomechanical effect of a metastatic lesion in an osteoporotic lumbar spine model. METHODS: A finite element model of two spinal motion segments (L3-L5) was extracted from a previously developed L3-Sacrum model and used to analyze the effect of metastasis size and bone mineral density (BMD) on Vertebral bulge (VB) and Vertebral height (VH). VB and VH represent respectively radial and axial displacement and they have been correlated to burst fracture. A total of 6 scenarios were evaluated combining three metastasis sizes (no metastasis, 15% and 30% of the vertebral body) and two BMD conditions (normal BMD and osteoporosis). RESULTS: 15% metastasis increased VB and VH by 178% and 248%, respectively in normal BMD model; while VB and VH increased by 134% and 174% in osteoporotic model. 30% metastasis increased VB and VH by 88% and 109%, respectively, when compared to 15% metastasis in normal BMD model; while VB and VH increased by 59% and 74% in osteoporotic model. CONCLUSION: A metastasis in the osteoporotic lumbar spine always leads to a higher risk of vertebral fracture. This risk increases with the size of the metastasis. Unexpectedly, an increment in metastasis size in the normal BMD spine produces a greater impact on vertebral stability compared to the osteoporotic spine.
Assuntos
Fenômenos Biomecânicos/fisiologia , Análise de Elementos Finitos , Vértebras Lombares/diagnóstico por imagem , Osteoporose/diagnóstico por imagem , Fraturas da Coluna Vertebral/diagnóstico por imagem , Humanos , Imageamento Tridimensional/métodos , Vértebras Lombares/fisiopatologia , Masculino , Pessoa de Meia-Idade , Osteoporose/fisiopatologia , Fraturas da Coluna Vertebral/fisiopatologia , Tomografia Computadorizada por Raios X/métodosRESUMO
PURPOSE: To determine the contribution of the ligamentum teres (LT) to hip stability in the presence of an intact capsule with special attention to the change in range of motion and femoral head translation. METHODS: Seven fresh-frozen cadaveric pelvises were used. Following visual inspection of the LT at different hip positions, internal rotation angles were measured at 10° of extension and at 0° of flexion, while external rotation was measured at 60°, 90°, and 110° of flexion with different hip abduction angles using electromagnetic motion tracking sensor. Femoral head translations were measured simultaneously. The tests were repeated after resection of the LT. The capsule was left intact for all test conditions. The results were compared between intact and LT resected conditions when torque of 2 and 4 Nm was applied. RESULTS: Compared with the intact hip, the LT resected hip showed no significant difference when 2 Nm torque was applied in all scenarios. With 4 Nm torque application, significant increase in external rotation was found at 60° and at 90° of flexion (1.7° ± 0.8° and 2.1° ± 1.0°, respectively). Significant difference was also noted at 60°, 90°, and 110° of flexion when the hip was in the adducted position while at 90° in the abducted hip. However, LT resection did not show significant change in internal rotation. There was no significant difference in the translation distance of the femoral head in the intact hip compared with the LT resected hip (0.77-1.11 mm vs 0.79-1.29 mm). CONCLUSIONS: Our results indicate that within the physiologic range of motion, LT can minimally limit external rotation when the hip is in the flexed position but does not contribute to translation stability. CLINICAL RELEVANCE: In the hip with intact capsule, LT deficiency can result in a slight increase in range of motion, but its contribution to stability is questionable.
Assuntos
Articulação do Quadril/fisiologia , Ligamentos Redondos/fisiologia , Idoso , Fenômenos Biomecânicos/fisiologia , Cadáver , Feminino , Cabeça do Fêmur/fisiologia , Humanos , Instabilidade Articular/fisiopatologia , Masculino , Pessoa de Meia-Idade , Exame Físico , Amplitude de Movimento Articular/fisiologia , Rotação , Ligamentos Redondos/lesões , TorqueRESUMO
PURPOSE: To determine the feasibility of shear wave elastography (SWE) with B-mode ultrasound in predicting the stiffness of the rotator cuff muscle before arthroscopic rotator cuff repair to evaluate the difficulty of the surgical procedure, as well as to compare SWE with the Goutallier stage on magnetic resonance imaging (MRI). METHODS: Thirty-eight patients with a full-thickness supraspinatus tear requiring arthroscopic rotator cuff repair participated. The Goutallier stage of fatty infiltration on MRI was measured before surgery, as was the SWE modulus of the anterior superficial, anterior deep, posterior superficial, and posterior deep (PD) regions of the supraspinatus muscle. To measure the stiffness of the supraspinatus musculotendinous unit during surgery, the supraspinatus tendon was axially stretched until the anatomic insertion site was reached, and force per deformation was recorded. The correlation between stiffness of the supraspinatus and SWE value in each region of the supraspinatus muscle or Goutallier stage was determined. In addition, patients were divided into 2 groups: (1) In the complete footprint coverage group, greater than 50% of the footprint was covered during the stiffness measurement, and (2) in the incomplete footprint coverage group, less than 50% of the footprint was covered during the stiffness measurement. Differences in SWE value and Goutallier stage were measured between the 2 groups. RESULTS: The best correlation of stiffness with the SWE modulus of the PD muscle of the supraspinatus was R = 0.69, and the correlation of stiffness with the Goutallier stage on MRI was R = 0.48. The SWE value of the PD region was greater in the incomplete footprint coverage group than in the complete footprint coverage group, although the Goutallier stage was not significantly different. CONCLUSIONS: The highest correlation with stiffness of the supraspinatus musculotendinous unit was with the SWE modulus of the PD muscle, as compared with SWE evaluation of the other regions or the Goutallier stage on MRI. Ultrasound SWE can predict the stiffness of the supraspinatus musculotendinous unit best. CLINICAL RELEVANCE: Rotator cuff retraction adds difficulty to arthroscopic rotator cuff repair. Ultrasound SWE may be used for presurgical planning.
Assuntos
Artroscopia/métodos , Técnicas de Imagem por Elasticidade/métodos , Lesões do Manguito Rotador/cirurgia , Manguito Rotador/cirurgia , Idoso , Elasticidade , Estudos de Viabilidade , Feminino , Humanos , Imageamento por Ressonância Magnética , Masculino , Pessoa de Meia-Idade , Cuidados Pré-Operatórios/métodos , Prognóstico , Manguito Rotador/diagnóstico por imagem , Manguito Rotador/fisiopatologia , Lesões do Manguito Rotador/diagnóstico por imagem , Lesões do Manguito Rotador/fisiopatologia , Articulação do Ombro/diagnóstico por imagem , Articulação do Ombro/cirurgiaRESUMO
PURPOSE: A simple overlay device (SOD) was developed to measure radial head implant length. The purpose of this study was to determine the accuracy and reliability of this device for measuring experimental radial head implant length. METHODS: Five fresh frozen cadavers were implanted with sequentially longer implants, adjusted by neck length (0, 2, 4, and 8 mm). Fluoroscopic images were obtained in 4 forearm positions: anteroposterior in supination in full extension, anteroposterior in pronation in full extension, supinated in 45° of flexion, and neutral in 45° of flexion. The SOD measurements (made by 2 observers) were compared with the native original radial head (control) to assess implant length. In addition, gapping of the ulnohumeral joint space was measured for comparison purposes. RESULTS: The measured radial head and neck lengths for the specimens were 33, 39, 31, 34, and 42 mm. The difference between the actual radial head and neck lengths and those measured with the SOD template averaged less than 2 mm for all 4 collar sizes, except in 1 measurement in which the bicipital tuberosity could not be visualized. The median intraclass correlation coefficients for observer 1 compared with the SOD were 0.94 to 0.99. The median intraclass correlation coefficients between observers were 0.88 to 0.95. For both observers, elbow position, collar height, and the 2 variables combined did not significantly affect the SOD values. The other method that was evaluated, that of measurement of the ulnohumeral joint space, had higher interobserver variability versus the SOD, and allowed detection of lengthening of over 4 mm. CONCLUSIONS: The SOD is a reliable method for simply assessing radial head length with radiographs and can accurately detect 2 mm or more of proximal radial lengthening. CLINICAL RELEVANCE: The SOD is a simple and accurate method that can help to optimize radial head sizing.
Assuntos
Fluoroscopia/instrumentação , Próteses e Implantes , Ajuste de Prótese/instrumentação , Rádio (Anatomia)/diagnóstico por imagem , Rádio (Anatomia)/cirurgia , Idoso , Idoso de 80 Anos ou mais , Artroplastia de Substituição , Cadáver , Humanos , Pessoa de Meia-Idade , Software , Articulação do Punho/diagnóstico por imagem , Articulação do Punho/cirurgiaRESUMO
PURPOSE: There is scant knowledge about the relationship between the size of the radial head and the size of the capitellum. Also, no data exist comparing the size of the capitellum between the left and the right elbow. METHODS: Eight pairs of elbows and 12 single elbows from fresh-frozen cadavers were obtained for this study. The vertical height and anterior width of the capitellum were measured with digital calipers. Four different measurements were performed at the radial head: longest outer diameter, shortest outer diameter, the long dish diameter, and short dish diameter. The Pearson intrarater intraclass correlation coefficients were obtained for all measurements. RESULTS: For the paired elbows, the correlations ranged between 0.95 and 0.96 for the capitellar dimensions and 0.77 and 0.98 for the radial head dimensions. The correlations between the long outer diameter of the radial head with the vertical height and the anterior width of the capitellum were 0.8 and 0.9, respectively. CONCLUSIONS: There is a high correlation between the long outer diameter of the radial head and the vertical height of the capitellum as well its anterior width. There is also a high correlation between the left and the right elbow. CLINICAL RELEVANCE: These findings are relevant to radiocapitellar arthroplasty and may be useful for radiocapitellar prosthetic design as well as in the preoperative planning of cases in which the radial head and/or the capitellum is destroyed.
Assuntos
Articulação do Cotovelo/anatomia & histologia , Úmero/anatomia & histologia , Rádio (Anatomia)/anatomia & histologia , Idoso , Idoso de 80 Anos ou mais , Cadáver , Feminino , Humanos , Modelos Lineares , Masculino , Pessoa de Meia-IdadeRESUMO
BACKGROUND: Minimal micromotion is necessary for osteointegration of cementless radial head prostheses. When radial head fractures extend longitudinally, where the neck cut for prosthetic replacement should be made is uncertain. We hypothesized that complete resection of the notched portion of a radial neck confers no advantage in initial stability compared with not resecting the defect and inserting the implant into a notched radial neck. MATERIALS AND METHODS: The radii of 7 cadavers underwent radial head resection and implantation with a 25-mm-long press-fit radial head stem. Before implantation, a 5-mm-long notch that was less than 1-mm wide was made in the radial neck. After the stem-bone micromotion was recorded, the proximal 5 mm of radial neck, incorporating the entire notch, was cut away, the stem was inserted 5 mm further, and the resulting micromotion was recorded. RESULTS: The mean micromotion measured in the presence of a cortical notch was 51 ± 6 µm. After the neck was circumferentially cut and the stem was advanced, the micromotion (46 ± 9 µm) was not statistically significantly different. DISCUSSION: Initial stability of an adequately sized cementless stem in the presence of a 5-mm-long cortical notch was well within the threshold needed for bone ingrowth (<100 µm). In addition, there was no reduction of micromotion after the notch-containing portion of the radial neck was resected and the stem was advanced. Making a neck cut distal to a 5-mm-long, 1-mm-wide cortical notch does not confer added stability. Thus, surgeons can preserve bone stock and avoid an aggressive neck cut.
Assuntos
Articulação do Cotovelo/cirurgia , Prótese de Cotovelo , Rádio (Anatomia)/cirurgia , Adulto , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Cadáver , Articulação do Cotovelo/fisiopatologia , Humanos , Pessoa de Meia-Idade , Desenho de PróteseRESUMO
BACKGROUND: Cartilage elasticity changes with cartilage degeneration. Hence, cartilage elasticity detection might be an alternative to traditional imaging methods for the early diagnosis of osteoarthritis. Based on the wave propagation measurement, Shear wave elastography (SWE) become an emerging non-invasive elasticity detection method. The wave propagation model, which is affected by tissue shapes, is crucial for elasticity estimating in SWE. However, wave propagation model for cartilage was unclear. METHODS: This study aimed to establish a wave propagation model for the cartilage-bone structure. We fabricated a cartilage-bone structure, and studied the elasticity measurement and wave propagation by experimental and numerical Lamb wave method (LWM). RESULTS: Results indicated the wave propagation model satisfied the lamb wave theory for two-layered structure. Moreover, a near field region, which affects wave speed measurements and whose occurrence can be prevented if the wave frequency is larger than one critical frequency, was observed. CONCLUSION: Our findings would provide a theoretical foundation for further application of LWM in elasticity measurement of cartilage in vivo. It can help the application of LWM to the diagnosis of osteoarthritis.
Assuntos
Osso e Ossos , Cartilagem , Elasticidade , Teste de Materiais , Fenômenos Biomecânicos , Modelos Biológicos , Polipropilenos/química , Silicones/químicaRESUMO
OBJECTIVE: To quantify and compare spinal curvature and shoulder kinematics throughout the manual wheelchair (MWC) propulsion cycle for individuals with spinal cord injury (SCI) who were seated at 2 different seat dump angles. DESIGN: Single-group, repeated-measures study. SETTING: Academic medical center. PARTICIPANTS: Individuals (N=28) with SCI or spinal cord disease who used MWCs completed a telephone screening, and 21 of them were eligible and completed the study. INTERVENTIONS: Participants' personal MWCs were modified to have seat dump angles of 0° or 14°, with a vertical backrest. Participants completed at least 3 propulsion cycles in each condition, during which spine and shoulder motion data were collected with fiberoptic and electromagnetic sensors, respectively. MAIN OUTCOME MEASURES: Thoracolumbar spinal curvature, glenohumeral kinematics, and scapulothoracic kinematics at the start of push (SP), mid-push (MP), end of push (EP), and mid-recovery. RESULTS: Participants had significantly less lordosis in the 14° condition for all propulsion events. Median differences ranged from 2.0° to 4.6°. Lordosis differences were more pronounced in those with low SCI. Scapulothoracic internal rotation was increased in the 14° condition at SP and MP (mean differences, 2.5° and 2.7°, respectively). Relative downward rotation increased in the 14° condition at SP and MP (mean differences, 2.4° and 2.1°, respectively). Scapulothoracic differences were more pronounced in those with high SCI. No glenohumeral rotations were significantly different between the conditions. CONCLUSIONS: Scapulothoracic kinematics and spinal curvature differences during propulsion may be associated with the position of other body segments or postural stability. Because no differences were observed at the glenohumeral joint, the risk of subacromial impingement may not be affected by this seat angle change.
Assuntos
Desenho de Equipamento , Lordose/fisiopatologia , Articulação do Ombro/fisiopatologia , Doenças da Medula Espinal/fisiopatologia , Traumatismos da Medula Espinal/fisiopatologia , Cadeiras de Rodas , Adulto , Fenômenos Biomecânicos/fisiologia , Pessoas com Deficiência , Feminino , Humanos , Masculino , Postura/fisiologiaRESUMO
PURPOSE: Forearm diaphysis fractures are usually managed by open reduction internal fixation. Recently, locking plates have been used for treatment. In the long-term period after surgery, some patients present with bone atrophy adjacent to the plate. However, a comparison of locking and conventional plates as a cause of atrophy has not been reported. The aim of this study was to investigate long-term bone atrophy associated with use of locking and conventional plates for forearm fracture treatment. METHODS: In this study we included 15 patients with forearm fracture managed by either locking or conventional plates and with more than 5 years of follow-up. Computed tomographic imaging of both forearms was performed to assess bone thickness and local bone mineral density and to predict bone strength without plate reinforcement based on finite element analysis. RESULTS: Mean patient age at surgery was 48.0 years. Eight patients underwent reduction with fixed locking plates and were followed up for a mean of 79.5 months; the remaining 7 patients were treated with conventional plates and were followed up for a mean of 105.0 months. Compared with the conventional plate group, the locking plate group had the same fractured limb-contralateral limb ratio of cortex bone thickness, but had significantly lower ratios of mineral density adjacent to the plate and adjusted bone strength. CONCLUSIONS: This study demonstrated bone atrophy after locking plate fixation for forearm fractures. Treatment plans for forearm fracture should take into consideration the impact of bone atrophy long after plate fixation. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.
Assuntos
Placas Ósseas , Fixação Interna de Fraturas/instrumentação , Fraturas do Rádio/patologia , Fraturas do Rádio/cirurgia , Fraturas da Ulna/patologia , Fraturas da Ulna/cirurgia , Adulto , Idoso , Estudos de Coortes , Feminino , Análise de Elementos Finitos , Humanos , Masculino , Pessoa de Meia-Idade , Resultado do Tratamento , Adulto JovemRESUMO
BACKGROUND: Metallic radial head prostheses are often used in the management of comminuted radial head fractures and elbow instability. We hypothesized that during radiocapitellar subluxation, the contact pressure characteristics of an anatomic radial head prosthesis will more closely mimic those of the native radial head compared with a monopolar circular or a bipolar circular radial head design. MATERIALS AND METHODS: With use of 6 fresh frozen cadaver elbows, mean radiocapitellar contact pressures, contact areas, and peak pressures of the native radial head were assessed at 0, 2, 4, and 6 mm of posterior subluxation. These assessments were repeated after the native radial head was replaced with anatomic, monopolar circular and bipolar circular prostheses. RESULTS: The joint contact pressures increased with the native and the prosthetic radial head subluxation. The mean contact pressures for the native radial head and anatomic prosthesis increased progressively and significantly from 0 to 6 mm of subluxation (native, 0.6 ± 0.0 MPa to 1.9 ± 0.2 MPa; anatomic, 0.7 ± 0.0 MPa to 2.1 ± 0.3 MPa; P < .0001). The contact pressures with the monopolar and bipolar prostheses were significantly higher at baseline and did not change significantly further with subluxation (monopolar, 2.0 ± 0.1 MPa to 2.2 ± 0.2 MPa [P = .31]; bipolar, 1.7 ± 0.1 MPa to 1.9 ± 0.1 MPa [P = .12]). The pattern of increase in contact pressures with the anatomic prosthesis mimicked that of the native radial head. Conversely, the circular prostheses started out with higher contact pressures that stayed elevated. CONCLUSION: The articular surface design of a radial head prosthesis is an important determinant of joint contact pressures.