A comparison between the characteristics of a biochar-NPK granule and a commercial NPK granule for application in the soil.

Continual application of nitrogen (N), phosphorous (P) and potassium (K) fertilizer may not return a profit to farmers due to the costs of application and the loss of NPK from soil in various ways. Thus, a combination of NPK granule with a porous biochar (termed here as BNPK) appears to offer multiple benefits resulting from the excellent properties of biochar. Given the lack of information on the properties of NPK and BNPK fertilizers, it is necessary to investigate the characteristics of both to achieve a good understanding of why BNPK granule is superior to NPK granule. Therefore, this study aims to investigate the characteristics of a maize straw biochar mixed with NPK granule, before and after application to soil, and compare them to those for a commercial NPK granule. The BNPK granule, with a greater surface area and porosity, showed a higher capacity to store and donate electrons than the NPK granule. Relatively lower concentrations of Ca, P, K, Si and Mg were dissolved from the BNPK, indicating the ability of the BNPK granule to maintain these mineral elements and reduce dissolution rate. To study the nutrient storage mechanism of the BNPK granule in the soil, short- and long-term leaching experiments were conducted. During the experiments, organo-mineral clusters, comprising C, P, K, Si, Al and Fe, were formed on the surface and inside the biochar pores. However, BNPK was not effective in reducing N leaching, in the absence of plants, in a red chromosol soil.

About the connectivity of dual-scale media based on micro-structure based regional analysis of NMR flow propagators.

The characterisation of heterogeneous porous media at multiple length scales typically requires the classification of structure at some scale to allow the calculation of effective transport properties at a scale relevant for macroscopic description. While such a classification may be derived from various imaging methods, a shortcoming is often the simultaneous characterisation of the connectivity between regions representing different micro-structure. In this work we combine NMR based flow propagators with the simulations performed on corresponding reconstructed structure, and relate the NMR measurements to their simulated global and local representations to study fluid transport locally and the exchange between micro- and macro-porous regions. This is achieved by carrying out detailed lattice Boltzmann simulations and random walk method to track the displacements of tracers in each kind of region. Using Euclidean distance maps (EDT) we analyse the fluid invasion to regions of different scale and relate it to the connectivity of the system. We demonstrate that numerical simulation has great flexibility in providing additional sensitivity to the inference of region-region connectivity.

Characteristics of a free-standing film from banana pseudostem nanocellulose generated from TEMPO-mediated oxidation.

Demand for bioplastic, especially for food packaging, increases as the consumers become more aware of the destructive effect of non-biodegradable plastics. Nanocellulose from banana pseudo-stem has great potential to be formed as a bioplastic. This study aimed to characterize the free-standing film produced from banana pseudo-stem nanocellulose that was prepared by TEMPO-mediated oxidation. The film was found containing calcium oxalate crystals, which most likely influenced the film transparency and possibly affected the contact angle and tensile strength. The film had initial degradation temperature at 205°C, the contact angle of 64.3°, the tensile strength of 59.5MPa, and elongation of 1.7%. This initial characterization of free-standing nanocellulose film showed a promising potential of TEMPO-treated nanocellulose from banana pseudo-stem as a source of bioplastic. This study could also be beneficial information for further possible modification to improve the banana pseudo-stem film properties.

High-fidelity replication of thermoplastic microneedles with open microfluidic channels.

Development of microneedles for unskilled and painless collection of blood or drug delivery addresses the quality of healthcare through early intervention at point-of-care. Microneedles with submicron to millimeter features have been fabricated from materials such as metals, silicon, and polymers by subtractive machining or etching. However, to date, large-scale manufacture of hollow microneedles has been limited by the cost and complexity of microfabrication techniques. This paper reports a novel manufacturing method that may overcome the complexity of hollow microneedle fabrication. Prototype microneedles with open microfluidic channels are fabricated by laser stereolithography. Thermoplastic replicas are manufactured from these templates by soft-embossing with high fidelity at submicron resolution. The manufacturing advantages are (a) direct printing from computer-aided design (CAD) drawing without the constraints imposed by subtractive machining or etching processes, (b) high-fidelity replication of prototype geometries with multiple reuses of elastomeric molds, (c) shorter manufacturing time compared to three-dimensional stereolithography, and (d) integration of microneedles with open-channel microfluidics. Future work will address development of open-channel microfluidics for drug delivery, fluid sampling and analysis.