Effect of light-, chemical-, and dual-cured universal adhesives on the internal adaptation of resin composites to pulpal and gingival internal walls.

PURPOSE: To compare the internal adaptation of restorative systems bonded to mid-coronal and gingival dentin using light-cured, chemical-cured, and dual-cured adhesives, both immediately and after aging. METHODS: 60 molars were selected and received occluso-mesial preparations with dentin gingival margins. Restorations were performed using different restorative systems with light-cured, chemical-cured, and dual-cured adhesives. Internal adaptation was assessed by examining the percentage of continuous margin (%CM) at the pulpal and gingival dentin under a scanning electron microscope at x200 magnification. Half of the teeth were stored in sterile water for 24 hours, while the other half underwent 10,000 thermal cycles. Micro-morphological analysis was conducted on representative samples at x1,000 magnification. RESULTS: The restorative system with light-cured adhesive exhibited significantly lower %CM values at the gingival dentin, particularly after aging. Aging had a negative impact on the %CM values of the pulpal and gingival dentin in restorative systems with light-cured and dual-cured adhesives. Regional dentin variations influenced the %CM values, especially after aging, regardless of the restorative system used. The tested restorative system with chemical-cured adhesive is preferable for achieving improved internal adaptation when bonding to both mid-coronal and gingival dentin, compared to the other tested systems. CLINICAL SIGNIFICANCE: The study highlights the variations in adhesive performance between different regional dentin areas using the tested restorative systems.

Clinical performance comparison between lithium disilicate and hybrid resin nano-ceramic CAD/CAM onlay restorations: a two-year randomized clinical split-mouth study.

A total of 20 lithium disilicate glass-ceramics (IPS e.max CAD, Ivoclar Vivadent) and 20 resin nano-ceramic (Voco Grandio Blocks) onlay restorations were performed in 20 patients using a split-mouth design to compare the two-year clinical performance of lithium disilicate and resin nano-ceramic onlay restorations. Both restorations were evaluated at baseline, one-year, and two-year clinical follow-ups based on the modified United States Public Health Service (USPHS) criteria. Chi-square and Fisher's exact tests showed no statistically significant difference between Voco Grandio and IPS e.max ceramic restorations for all evaluated parameters during the different follow-up periods (p > 0.05). Cochrane's and MC-Nemar's tests indicated statistically significant differences regarding color match within the Voco Grandio group. They also indicated statistically significant differences in marginal discoloration, marginal adaptation, surface texture, and postoperative hypersensitivity within both ceramic material groups (p < 0.05). Kaplan-Meier curve indicated that the survival rate of both ceramic materials was 90%. After two years of clinical service, IPS e.max CAD and Voco Grandio onlay restorations exhibited similar clinical performance.

Effect of different restorative systems and aging on marginal adaptation of resin composites to deep proximal margins.

OBJECTIVES: To evaluate and compare the marginal integrity of different restorative systems bonded to proximal gingival dentin, and determine the consistency level of the results obtained by two in vitro methods. MATERIALS AND METHODS: Thirty molars received occluso-mesial preparations with dentin/cementum gingival margins. They were divided into three groups and restored using different restorative systems with light-cured (Adhese Universal), self-cured (Palfique universal bond), and dual-cured (Futurabond U) adhesives. The restoration/gingival dentin interfaces were observed using scanning electron microscopy (SEM) and evaluated based on the World Dental Federation (FDI) criteria. After 10,000 thermal cycles, the marginal integrity was re-evaluated. Marginal integrity was evaluated by the percentage of continuous margin (% CM) at ×200 for SEM and as the frequency of each score within the FDI ranking. RESULTS: No significant differences were found between the restorative systems immediately, however, the system with the light-cured adhesive had the lowest marginal integrity after aging. All tested restorative systems were adversely affected by aging. A moderate inverse correlation was identified between evaluation techniques. CONCLUSION: The tested restorative systems utilizing self-cured and dual-cured adhesives may be preferable for achieving optimal marginal integrity when bonding to deep proximal margins, compared to the tested system with light-cured adhesive. CLINICAL SIGNIFICANCE: When performing deep margin elevation, it is important to consider the adhesive system being used.

Clinical performance of different bulk-fill composite resin systems in class II cavities: A 2-year randomized clinical trial.

OBJECTIVES: This study evaluated the clinical performance of bulk-fill resin composite systems with different viscosities in class II cavities. MATERIALS AND METHODS: A total of 80 class II restorations were performed with a single operator in 50 patients using four different bulk-fill resin composite materials: Filtek™ Bulk Fill, Heated Filtek™ Bulk Fill, G-aenial™ BULK Injectable, and SonicFill3. A double-blinded randomized clinical trial was designed to evaluate the two-year clinical performance of the four bulk-fill composite resins using modified FDI criteria. Data were analyzed descriptively. Level of significance was set at 0.05. Differences between groups were tested using Wilcoxon-signed-rank and Mann-Whitney-U test as nonparametric tests. RESULTS: Data were analyzed using Kruskal-Wallis, Mann-Whitney U, and Wilcoxon signed rank tests (p < 0.05). Eighty restorations were available for evaluation, with a survival function of 100%. No statistically significant differences were observed between the four groups regarding assessing esthetic, functional, and biological properties during different follow-up periods. CONCLUSIONS: After 2 years of clinical follow-up, the bulk-fill composite systems with different viscosities seem to be esthetically, functionally, and biologically acceptable, with a promising clinical performance in class II cavities.

Clinical evaluation of subgingival open sandwich restorations: 3-year results of a randomized double-blind trial.

OBJECTIVES: To provide a 3-year follow-up of previously treated patients to assess and compare the periodontal responses and clinical performance of proximal subgingival open sandwich restorations. MATERIALS AND METHODS: Ninety-five adults participated in the study, with a combined total of 120 compound Class II cavities. These cavities had gingival margins located below the CEJ. Four different restorative materials were used to elevate the dentin/cementum gingival margins of the cavities: resin-modified glass ionomer, glass hybrid, flowable bulk-fill composite, or ion-releasing material, which were then completed with the same overlaying composite. Different periodontal and clinical evaluations, based on the criteria set by the World Dental Federation (FDI) criteria, were performed at different time intervals, including baseline, 6 months, 1, 2, and 3 years. RESULTS: The type of base material did not affect the periodontal evaluations. There were no statistically significant differences between different time intervals or base material groups in any of the evaluated FDI parameters. However, the ion-releasing material scored significantly worse in the radiographic evaluation than any of the other groups. CONCLUSIONS: All tested materials are suitable for proximal subgingival open sandwich restorations, as long as the restoration/tooth margin is at least 2-mm away from the bone crest. CLINICAL SIGNIFICANCE: Clinicians can confidently choose any of the tested materials for proximal subgingival open sandwich restorations, as they have shown good outcomes from both periodontal and clinical perspectives.

Association of Human Papilloma Virus, Cytomegalovirus, and Epstein-Barr Virus with Breast Cancer in Jordanian Women.

Background and Objectives: The investigation of oncogenic viruses and their potential association with breast cancer (BC) remains an intriguing area of study. The current work aims to assess evidence of three specific viruses, human papillomavirus (HPV), cytomegalovirus (CMV), and Epstein-Barr virus (EBV) in BC samples and to explore their relationship with relevant clinicopathological variables. Materials and Methods: The analysis involved BC samples from 110 Jordanian female patients diagnosed with BC and breast tissue samples from 30 control patients with no evidence of breast malignancy, investigated using real-time PCR. The findings were then correlated with various clinico-pathological characteristics of BC. Results: HPV was detected in 27 (24.5%), CMV in 15 (13.6%), and EBV in 18 (16.4%) BC patients. None of the control samples was positive for HPV or CMV while EBV was detected in only one (3.3%) sample. While (HPV/EBV), (HPV/CMV), and (EBV/CMV) co-infections were reported in 1.8%, 2.7%, and 5.5%, respectively, coinfection with the three viruses (HPV/CMV/EBV) was not reported in our cohort. A statistically significant association was observed between HPV status and age (p = 0.047), and between clinical stage and CMV infection (p = 0.015). Conclusions: Our findings indicate the presence or co-presence of HPV, CMV, and EBV in the BC subpopulation, suggesting a potential role in its development and/or progression. Further investigation is required to elucidate the underlying mechanisms that account for the exact role of oncoviruses in breast carcinogenesis.

Periodontopathic bacterial adhesion to different restorative materials used to elevate proximal subgingival margins.

This study compared the periodontopathic bacterial adhesion to four restorative materials used for deep margin elevation at 2, 24, and 48-h after incubation. Discs were produced from four restorative materials: resin modified glass ionomer, glass hybrid, flowable bulk fill resin composite, and bioactive ionic resin. Root dentin was used as control. Specimens were coated with saliva and used to culture a biofilm comprised of three strains of periodontopathic bacteria; Porphyromonas gingivalis, Prevotella intermedia, and Aggregatibacter actinomycetemcomitans. Bacterial adherence was assessed by colony count assay, crystal violet staining, and visualized using confocal laser scanning microscopy. Data were analyzed by two-way ANOVA followed by Tukey's post hoc tests. The adhesion values for the control specimens were significantly higher than for other materials, while those for the flowable bulk fill were significantly lower than for any other material within all evaluation assays. The 2-h incubation period showed the lowest adhesion values regardless of the group. The 48-h adhesion values were higher than the 24-h results in all groups except the flowable bulk fill. Microscopic imaging partially supported the findings of the measurements. In terms of periodontopathic bacterial adhesion, the tested flowable bulk fill may be preferable for subgingival use over other tested materials.

A prospective study of extraesophageal reflux and potential microaspiration in patients hospitalized with COVID-19 in Jordan.

BACKGROUND: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) lung infection has represented a global challenge. Intriguingly, it has been shown that the alveolar lung epithelium expresses little Angiotensin Converting Enzyme receptor protein (ACE2), the entry receptor for SARS-CoV-2. Upper airway establishment of infection and translocation to the lung is well documented but other anatomical niches may be relevant to potentially serious lung infection. ACE2 is heavily expressed in the gastrointestinal tract and gastrointestinal symptoms support a clinical diagnosis of Coronavirus disease 2019 (COVID-19). This suggests a research question and the need to gather patient data exploring potential aerodigestive links in SARS-CoV-2 tranlocation and infection which may be relevant in the peripheral lung. This recognizes anatomical proximity and concepts of bi-directional movement between the Gastrointestinal and lung systems in normal physiology and disease. We have therefore explored the potential for gastro oesophageal reflux disease (GORD) micro aspiration and aeorodigestive pathophysiology in a novel prospective investigation of patients hospitalized with COVID-19. METHODS: This is a prospective descriptive cohort study of 210 patients who were hospitalized with a confirmed diagnosis of COVID-19. The cohort was divided into three groups of patients based on symptom severity and radiological results. The Reflux Symptom Index (RSI) was used to evaluate the presence and severity of GOR. An RSI greater than 13 is considered to be abnormal. Patients' saliva samples were tested using enzyme-linked immunosorbent assay (ELISA) to determine the level of salivary pepsin among the cohort of patients. RESULTS: A total of 210 patients with COVID-19 were enrolled in the study with 55.2% (116/210) classified as mildly ill, 31.9% (67/210) moderately ill and 12.9% (27/210) as severely ill. 34% (72/210) of the patients had an RSI score of over 13 and a median salivary pepsin value of 54 ± 29 ng/ml which suggested an incidence of extraesophageal reflux (EOR) in around a third of patients. The presence of respiratory comorbid conditions, an RSI score of over 13 and a salivary pepsin level of > 76ng/ml increased the risk of developing a more severe COVID-19 infection. CONCLUSION: The study showed a high prevalence of EOR among the study cohort and provide the first prospective evidence suggesting the potential for aerodigestive pathophysiology including microaspiration in COVID-19 disease. We believe that the results of our study support the need for more extensive research.

Dietary Wood and Activated Charcoal Improved Ammonium Removal, Heavy Metals Detoxification, Growth Performance, Blood Biochemistry, Carcass Traits, and Histopathology of European Seabass.

A 120-day growth trial was completed to assess rearing water quality and fish performance in terms of growth, feed efficacy, digestive enzymes, immunity, and antioxidant activity of seabass fed an experimental diet (ED) supplemented with commercial wood charcoal (WC) and activated wood charcoal (AC). Three levels (0, 10, and 20 g) of WC and AC were administered, representing five treatments: control (CD) fish-fed ED without additives, (WC-1) fish-fed ED containing 10 g kg-1 WC, (WC-2) fish-fed ED containing 20 g kg-1 WC, (AC-1) fish-fed ED containing 10 g kg-1 AC, and (AC-2) fish-fed ED containing 20 g kg-1 AC. Three hundred fish (60.12 ± 0.20 g/fish) were stocked in 15 cement tanks (4.0 m × 2.0 m × 1.2 m, water volume 5 m3 each) at 20 fish/tank and a daily feed ration of 3% of body weight. Results revealed significant improvements with increased growth variables (final weight, weight gain, and specific growth rate), decreased FCR, and decreased ammonia levels and heavy metals (Cu, Cd, Fe, Mn, and Zn) content in rearing water, muscle, and liver with fish fed WC and AC supplemented diets. Furthermore, considerable improvements in digestive enzymes, immunity, and antioxidant activity, with enhanced kidneys, liver, intestines, gills, and spleen. Fish fed the WC-1 diet had a higher final weight (171.90 g), better FCR (1.25), and improved internal organs than the other groups.

Cefixime and cefixime-clavulanate for screening and confirmation of extended-spectrum beta-lactamases in Escherichia coli.

INTRODUCTION: Detection of Extended-Spectrum Beta-Lactamases (ESBLs) depends on screening for resistance to certain cephalosporins, confirmation with selective ESBL inhibitors, and ESBL genes detection. New tests are required for accurate ESBL detection. AIMS: To test the ability of cefixime (CFM) and cefixime-amoxicillin/clavulanate (CFM-AMC) as a screening and confirmatory test for ESBL identification. METHODS: 246 clinical isolates of Escherichia coli were tested by an ESBL screening test, a double-disk synergy test (DDST), a disk replacement test, the Vitek 2 ESBL test, and an ESBL genes test by PCR. CFM ESBL Screening was performed by disk diffusion, while CFM-AMC confirmation was performed by DDST and a disk replacement test. RESULTS: 246 E. coli clinical isolates from two referral hospitals were collected over 2 years. The mean age ± standard deviation of patients was 43.8 ± 27.7 years and 76.8% were females. Resistance rates to penicillins, first, second, and third generation cephalosporins, and monobactams were very high at 97%, 84%, 100% and 97%, respectively. ESBL screening was positive in 81.3% of isolates, DDST was positive in 74.8%, disk replacement was positive in 79%, Vitek 2 ESBL test was positive in 67.3%, and ESBL genes were detected in 85.8% of isolates (CTX-M 75%, TEM 42.5%, SHV 4.6%). Compared to genotyping, screening with CFM achieved 87.7% sensitivity and 64.7% specificity. CFM-AMC DDST achieved 75.8% sensitivity and 75.4% specificity, and CFM-AMC disk replacement had 73% sensitivity and 70% specificity. CONCLUSIONS: High prevalence of ESBLs was noted among E. coli isolates, dominated by CTX-M genotype. ESBL screening and confirmation using CFM and CFM-AMC is a new and accurate method for ESBLs detection.

Senolytic Therapy: A Potential Approach for the Elimination of Oncogene-Induced Senescent HPV-Positive Cells.

Senescence represents a unique cellular stress response characterized by a stable growth arrest, macromolecular alterations, and wide spectrum changes in gene expression. Classically, senescence is the end-product of progressive telomeric attrition resulting from the repetitive division of somatic cells. In addition, senescent cells accumulate in premalignant lesions, in part, as a product of oncogene hyperactivation, reflecting one element of the tumor suppressive function of senescence. Oncogenic processes that induce senescence include overexpression/hyperactivation of H-Ras, B-Raf, and cyclin E as well as inactivation of PTEN. Oncogenic viruses, such as Human Papilloma Virus (HPV), have also been shown to induce senescence. High-risk strains of HPV drive the immortalization, and hence transformation, of cervical epithelial cells via several mechanisms, but primarily via deregulation of the cell cycle, and possibly, by facilitating escape from senescence. Despite the wide and successful utilization of HPV vaccines in reducing the incidence of cervical cancer, this measure is not effective in preventing cancer development in individuals already positive for HPV. Accordingly, in this commentary, we focus on the potential contribution of oncogene and HPV-induced senescence (OIS) in cervical cancer. We further consider the potential utility of senolytic agents for the elimination of HPV-harboring senescent cells as a strategy for reducing HPV-driven transformation and the risk of cervical cancer development.

Color stability and surface roughness of ormocer- versus methacrylate-based single shade composite in anterior restoration.

BACKGROUND: The blending ability of universal shade composites and their stability in the oral environment are of great concern in restoring anterior teeth. This study aims to evaluate and compare the color stability and surface roughness of two single-shade composite restorations, ormocer-based composite (OBC) and methacrylate resin-based composite (RBC), after storing them in different staining media. MATERIALS AND METHODS: In this study, two universal shade composite restorative materials were tested: a nanohybrid OBC (Admira fusion X-tra, Voco) and a supra-nanofilled RBC (Omnichroma, Toukyama). In total, 60 cylindrical centralized cavities (diameter: 5 mm, depth: 2 mm) were prepared in sound extracted-human central incisors and divided into two equal groups according to the restorative material used (n = 30). According to the storage media, the teeth of each group were divided into three subgroups (n = 10): artificial saliva, black tea, and cola. The restoration color was evaluated for all teeth at baseline and after four weeks of storage. The color stability (∆E) was measured using a reflective spectrophotometer (X-Rite, model RM200QC, Neu-Isenburg, Germany). The surface roughness (Ra) was evaluated using three-dimensional optical profilometry (Wyko, Model NT 1100, Veeco, Tucson, USA). Additionally, the extracted data were analyzed using two-way analysis of variance (ANOVA), one-way ANOVA and Student's t-test. RESULTS: In the baseline evaluation, there were no statistically significant differences with respect to color matching or surface roughness results between the two studied restorative materials. However, the differences were statistically significant after storing them in different media. CONCLUSION: Universal composites showed satisfactory color matching with different teeth colors and accepted surface smoothness, whereas the aging procedure exerted a negative effect on their color stability and surface characteristics.

Outcomes of COVID-19 in hospitalized solid organ transplant recipients compared to a matched cohort of non-transplant patients at a national healthcare system in the United States.

Data describing outcomes of solid organ transplant (SOT) recipients with coronavirus disease 2019 (COVID-19) are variable, and the association between SOT status and mortality remains unclear. In this study, we compare clinical outcomes of SOT recipients hospitalized with COVID-19 between March 10, and September 1, 2020, to a matched cohort of non-SOT recipients at a national healthcare system in the United States (US). From a population of 43 461 hospitalized COVID-19-positive patients, we created a coarsened exact matched cohort of 4035 patients including 128 SOT recipients and 3907 weighted matched non-SOT controls. Multiple logistic regression was used to evaluate association between SOT status and clinical outcomes. Among the 4035 patients, median age was 60 years, 61.7% were male, 21.9% were Black/African American, and 50.8% identified as Hispanic/Latino ethnicity. Patients with a history of SOT were more likely to die within the study period when compared to matched non-SOT recipients (21.9% and 14.9%, respectively; odds ratio [OR] 1.93; 95% confidence interval [CI]: 1.18-3.15). Moreover, SOT status was associated with increased odds of receiving invasive mechanical ventilation (OR [95% CI]: 2.34 [1.51-3.65]), developing acute kidney injury (OR [95% CI]: 2.41 [1.59-3.65]), and receiving vasopressor support during hospitalization (OR [95% CI]: 2.14 [1.31-3.48]).

Maternal and neonatal outcomes in mothers with diabetes mellitus in qatari population.

BACKGROUND: Diabetes Mellitus (DM) is a major cause of maternal, fetal, and neonatal morbidities. Our objective was to estimate the effect of both pre-pregnancy and gestational DM on the growth parameters of newborns in the Qatari population. METHODS: In this population-based cohort study, we compared the data of neonates born to Qatari women with both pre-pregnancy and gestational diabetes mellitus in 2017 with neonates of healthy non-diabetic Qatari women. RESULTS: Out of a total of 17020 live births in 2017, 5195 newborns were born to Qatari women. Of these, 1260 were born to women with GDM, 152 were born to women with pre-pregnancy DM and 3783 neonates were born to healthy non-diabetic (control) women. The prevalence of GDM in the Qatari population in 2017 was 24.25%. HbA1C% before delivery was significantly higher in women with pre-pregnancy DM (mean 6.19 ± 1.15) compared to those with GDM (mean 5.28 ± 0.43) (P <0.0001). The mean birth weight in grams was 3066.01 ± 603.42 in the control group compared to 3156.73 ± 577.88 in infants born to women with GDM and 3048.78 ± 677.98 in infants born to women with pre-pregnancy DM (P <0.0001). There was no statistically significant difference regarding the mean length (P= 0.080), head circumference (P= 0.514), and rate of major congenital malformations (P= 0.211). Macrosomia (Birth weight > 4000 gm) was observed in 2.7% of the control group compared to 4.8% in infants born to women with GDM, and 4.6% in infants born to women with pre-pregnancy DM (P= 0.001). Multivariate logistic regression analysis demonstrated that higher maternal age (adjusted OR 2.21, 95% CI 1.93, 2.52, P<0.0001), obesity before pregnancy (adjusted OR 1.71, 95% CI 1.30, 2.23, P<0.0001), type of delivery C-section (adjusted OR 1.25, 95% CI 1.09, 1.44, P=0.002), and body weight to gestational age LGA (adjusted OR 2.30, 95% CI 1.64, 2.34, P<0.0001) were significantly associated with increased risk of GDM. CONCLUSION: Despite the multi-disciplinary antenatal diabetic care management, there is still an increased birth weight and an increased prevalence of macrosomia among the infants of diabetic mothers. More efforts should be addressed to improve the known modifiable factors such as women's adherence to the diabetic control program. Furthermore, pre-pregnancy BMI was found to be significantly associated with gestational DM, and this is a factor that can be addressed during pre-conceptional counseling.

Dermatological surgery: an update on suture materials and techniques. Part 1.

Significant variation exists in the surgical suture materials and techniques used for dermatological surgery. Many wound-closure techniques are now practised, including use of sutures, staples and topical adhesives. The focus of our review article is to summarize the latest evidence relating to suture materials and wound-closure techniques, considering the following areas: scar/cosmesis, pain, patient satisfaction, cost, infection and wound complications. We searched the databases Medline, PubMed and Embase using the keywords 'skin surgery', 'dermatologic surgery', 'sutures', 'suture techniques', 'suturing techniques' and 'surgical techniques' to identify relevant English-language articles. Absorbable superficial sutures may be a preferred alternative to nonabsorbable sutures by both patients and surgeons. Subcuticular sutures may be preferable to simple interrupted sutures for superficial wound closure, and there may also be a role for skin staples in dermatological surgery, particularly on the scalp. However, there remains limited evidence specific to dermatological surgery supporting the use of particular suture materials and suturing techniques. Further high-quality research is required, including multicentre randomized trials with larger cohorts.

Dermatological surgery: an update on suture materials and techniques. Part 2.

This is the second part of a two-part series summarizing the latest evidence related to suture materials and wound closure techniques in dermatological surgery. We critically appraised evidence focusing on the following consequences of suture choice: scar/cosmesis, pain, patient satisfaction, cost, infection and wound complications. We searched the databases MEDLINE, PubMed and Embase using the keywords 'skin surgery', 'dermatological surgery', 'sutures', 'braided sutures', 'monofilament sutures' and 'antibacterial sutures' to identify relevant English-language articles. This part of the review assesses the evidence for different types of buried sutures, including braided vs. monofilament sutures, longer-absorbing sutures and antibacterial sutures. The majority of trials were noted to be of poor quality, single-centre (thus lacking external validity) and underpowered, which presents challenges in comparing suture techniques in skin surgery. Future large-scale, multicentre, randomized trials are needed, with both surgeon and patient-assessed validated outcomes.

Next steps in dermatology training: choosing to enter higher speciality training and the transition from trainee to consultant dermatologist.

BACKGROUND: Junior doctors are required to make career decisions at an early stage in their postgraduate training. Trainees also feel inadequately prepared for the transition to consultant roles. AIM: To explore the key factors influencing the choice of dermatology as a postgraduate medical career and to identify the training needs required for transition from trainee to consultant. METHODS: An online questionnaire was designed to identify (i) why trainees chose a postgraduate medical career in dermatology, and (ii) the training required for transition from trainee to consultant. RESULTS: In total, 46 responses were received from trainees in their first to final years (ST3-6), of whom 89% had undertaken an undergraduate dermatology placement, with a median duration of 2 weeks. Dermatology was considered as a career during medical school by 61% of trainees, and 41% confirmed their decision to pursue a career in dermatology during foundation training. The most influential factors involved in speciality selection were first, enjoyment of the work, second, postgraduate experience and equal third, the variety of the speciality and the regularity of working hours (P < 0.05). Mentoring was pivotal to career decision-making. Significant numbers of trainees expressed a need for training in medical leadership, such as running an outpatient clinic and supervising clinical multidisciplinary teams. Although larger numbers of trainees had training in management of dermatology services, such as service improvement (52%) and local governance/National Health Service structures (43%), significant numbers of trainees had no training in writing job plans (89%) or business plans (85%). Training was significantly deficient for personal management and self-awareness. CONCLUSION: Our study highlights important considerations in career decision-making for trainees. Training in medical leadership, management and self-awareness could be enhanced to ensure that trainees feel adequately equipped for consultant roles.

Effect of double layer application on bond durability of universal adhesives to proximal dentin-cementum gingival margins.

PURPOSE: To evaluate and compare the effect on micro-tensile bond strength (µTBS) of a double layer application of three universal adhesives applied in self-etch mode to proximal dentin/cementum gingival margins of class II direct composite restorations, immediately and after 12 months water storage. METHODS: 66 molars with compound class II cavities, with gingival margin 1 mm below CEJ, were divided into three groups according to the universal adhesive used. The adhesives evaluated included All-Bond Universal (AB), Single Bond Universal (SB), and Prime&Bond Elect (PB). The groups were further subdivided according to adhesive application technique, either single layer or double layer application. All teeth were restored with the same nanofilled resin composite. µTBS were examined at a crosshead speed of 0.5 mm/minute after 24 hours or 12 months water storage. Fracture mode was assessed under stereomicroscope. Data were analyzed by two-way analysis of variance (ANOVA) followed by Tukey's post hoc test (P< 0.05). RESULTS: The double layer application µTBS values were significantly higher than single layer application in all groups. Regardless of the type of adhesive or application technique, all subgroups showed significantly decreased bond strength after aging. There were significant lower µTBS values for AB adhesive compared with the other two adhesives that demonstrated no significant differences between them. The double layer application technique was effective in enhancing µTBS values of all tested adhesives bonded to proximal dentin/cementum gingival margins compared to single layer application. Regardless of application technique, all tested adhesives were incapable of defying long-term water aging. CLINICAL SIGNIFICANCE: The double layer application technique may be recommended to enhance the bonding durability of universal adhesives to face challenges in bonding to dentin-cementum cervical margins.

A review of studies looking at quality of life and psychological impact in people with photodermatoses - skin diseases triggered by sunlight.

Photodermatoses, or photosensitivity conditions, are a group of skin disorders caused by exposure to sunlight, overall affecting a large number of people. They cause a range of distressing symptoms including pain and burn, and can make the skin blister, flake and scar. The conditions themselves and the need for patients to avoid and protect themselves from sunlight may affect quality of life and psychological health. This study, from the U.K., aimed to find out what methods of assessment (tools) have been used to evaluate quality of life and psychological health in photodermatoses, and report what the impact is for patients. The authors reviewed relevant published English-language studies and summarised their findings. 20 studies were included: 19 assessing quality of life and three assessing psychological function. Six different tools had been used to assess quality of life, and four different tools to assess psychological health. It was shown that 31-39% of patients with photodermatoses experienced a very large impact on their quality of life. There was a particular impact on issues related to employment, social/leisure activities and clothing choices. Patients had around double the rates of anxiety and depression found in the general population, although few studies focussed on psychological health. The authors also noted that most available tools were not designed to address the unique impact of intermittent sunlight-induced skin conditions and suggested that development of more specific tools could be beneficial. In conclusion, this study confirmed that patients with photodermatoses experience substantial impact on their quality of life and that more research is needed. This is a summary of the study: Quality of life and psychological impact in the photodermatoses: a systematic review.

Quality of life and psychological impact in the photodermatoses: a systematic review.

BACKGROUND: The photodermatoses affect large proportions of the population but their impact on quality of life (QoL) and psychological health has not been reviewed. Several tools are available to evaluate QoL and psychological impacts. OBJECTIVES: To systematically review current literature to identify tools used to assess QoL and psychological impacts in patients with photodermatoses, and to summarize the reported findings. METHODS: A systematic search of PubMed, OVID Medline, PsycInfo and CINAHL was performed for articles investigating QoL and/or psychological impact in patients with photodermatoses, published between 1960 and September 2018. RESULTS: Twenty studies were included: 19 incorporated QoL assessment while three evaluated psychological morbidity. Six QoL tools were found to be used: Dermatology Life Quality Index (DLQI), Children's DLQI, Family DLQI, Skindex (16- and 29-item versions), Erythropoietic Protoporphyria Quality of Life (EPP-QoL) and EuroQol. Between 31% and 39% of photosensitive patients reported a very large impact on QoL (DLQI > 10). Employment and education, social and leisure activities, and clothing choices were particularly affected. Only one tool was specifically designed for a photodermatosis (EPP-QoL). Four tools were used to evaluate psychological impact: the Hospital Anxiety and Depression Scale, Fear of Negative Evaluation, brief COPE and Illness Perception Questionnaire-Revised. Levels of anxiety and depression were approximately double British population data. Patients with facial involvement, female gender and younger age at onset showed more psychological morbidity. CONCLUSIONS: Several tools have been used to assess QoL in the photodermatoses, and confirm substantial impact on QoL. Development of specific, validated QoL measures would address their unique impacts. Research delineating their psychological comorbidity is sparse and requires further exploration. What's already known about this topic? The photodermatoses negatively impact quality of life (QoL) and cause psychological distress, but no reviews of this area appear in the literature. What does this study add? Few studies have explored the psychological and social impacts of the photodermatoses. There are no fully validated QoL tools specific to the photodermatoses. Around one-third of adult and child patients with photosensitivity experience very or extremely large impact on QoL, with particular effect on clothing choices, employment and social and leisure activities. Studies suggest anxiety and depression levels in these patients are around double those in the U.K. general population. More attention is required on these 'hidden' conditions.