Plants-derived bioactives: Novel utilization as antimicrobial, antioxidant and phytoreducing agents for the biosynthesis of metallic nanoparticles.

Medicinal and aromatic higher plants are sustainable resources for natural product compounds, including essential oils, phenolics, flavonoids, alkaloids, glycosides, and saponins. Extractives and essential oils as well as their bioactive compounds have many uses due to their antimicrobial, anticancer, and antioxidant properties as well as application in food preservation. These natural compounds have been reported in many works, for instance biofungicide with phenolic and flavonoid compounds being effective against mold that causes discoloration of wood. Additionally, the natural extracts from higher plants can be used to mediate the synthesis of nanoparticle materials. Therefore, in this review, we aim to promote and declare the use of natural products as environmentally eco-friendly bio-agents against certain pathogenic microbes and make recommendations to overcome the extensive uses of conventional pesticides and other preservatives.

Erratum: Lattice Dynamics Coupled to Charge and Spin Degrees of Freedom in the Molecular Dimer-Mott Insulator κ-(BEDT-TTF)_{2}Cu[N(CN)_{2}]Cl [Phys. Rev. Lett. 123, 027601 (2019)].

This corrects the article DOI: 10.1103/PhysRevLett.123.027601.

Lattice Dynamics Coupled to Charge and Spin Degrees of Freedom in the Molecular Dimer-Mott Insulator κ-(BEDT-TTF)_{2}Cu[N(CN)_{2}]Cl.

Inelastic neutron scattering measurements on the molecular dimer-Mott insulator κ-(BEDT-TTF)_{2}Cu[N(CN)_{2}]Cl reveal a phonon anomaly in a wide temperature range. Starting from T_{ins}∼50-60 K where the charge gap opens, the low-lying optical phonon modes become overdamped upon cooling towards the antiferromagnetic ordering temperature T_{N}=27 K, where also a ferroelectric ordering at T_{FE}≈T_{N} occurs. Conversely, the phonon damping becomes small again when spins and charges are ordered below T_{N}, while no change of the lattice symmetry is observed across T_{N} in neutron diffraction measurements. We assign the phonon anomalies to structural fluctuations coupled to charge and spin degrees of freedom in the BEDT-TTF molecules.

Identification of Cell Type-Specific Differences in Erythropoietin Receptor Signaling in Primary Erythroid and Lung Cancer Cells.

Lung cancer, with its most prevalent form non-small-cell lung carcinoma (NSCLC), is one of the leading causes of cancer-related deaths worldwide, and is commonly treated with chemotherapeutic drugs such as cisplatin. Lung cancer patients frequently suffer from chemotherapy-induced anemia, which can be treated with erythropoietin (EPO). However, studies have indicated that EPO not only promotes erythropoiesis in hematopoietic cells, but may also enhance survival of NSCLC cells. Here, we verified that the NSCLC cell line H838 expresses functional erythropoietin receptors (EPOR) and that treatment with EPO reduces cisplatin-induced apoptosis. To pinpoint differences in EPO-induced survival signaling in erythroid progenitor cells (CFU-E, colony forming unit-erythroid) and H838 cells, we combined mathematical modeling with a method for feature selection, the L1 regularization. Utilizing an example model and simulated data, we demonstrated that this approach enables the accurate identification and quantification of cell type-specific parameters. We applied our strategy to quantitative time-resolved data of EPO-induced JAK/STAT signaling generated by quantitative immunoblotting, mass spectrometry and quantitative real-time PCR (qRT-PCR) in CFU-E and H838 cells as well as H838 cells overexpressing human EPOR (H838-HA-hEPOR). The established parsimonious mathematical model was able to simultaneously describe the data sets of CFU-E, H838 and H838-HA-hEPOR cells. Seven cell type-specific parameters were identified that included for example parameters for nuclear translocation of STAT5 and target gene induction. Cell type-specific differences in target gene induction were experimentally validated by qRT-PCR experiments. The systematic identification of pathway differences and sensitivities of EPOR signaling in CFU-E and H838 cells revealed potential targets for intervention to selectively inhibit EPO-induced signaling in the tumor cells but leave the responses in erythroid progenitor cells unaffected. Thus, the proposed modeling strategy can be employed as a general procedure to identify cell type-specific parameters and to recommend treatment strategies for the selective targeting of specific cell types.

[Success Factors for the Labour Market Integration of People with Psychosocial Disabilities - A Qualitative Survey in Austrian Companies]. / Gelingensfaktoren für die Arbeitsmarktintegration von Menschen mit psychischer Beeinträchtigung ­ eine qualitative Befragung von Betrieben in Österreich.

OBJECTIVE: The study examines conditions to promote employment and workplace integration of people with psychosocial disabilities. METHOD: 26 guided interviews were conducted with Austrian companies. 15 of these companies employed people with mental disabilities at the time of the interview. The remaining 11 companies did not employ anyone who had a declared mental illness. RESULTS: Companies that employ people with mental disabilities refer to an idealistic, social or socio-political motive for employment and have manifold supportive measures in place. Companies that do not employ people with mental disabilities express insecurities and ambivalent expectations regarding employment of people with mental disabilities. CONCLUSION: Results show that it is imperative to inform companies of the possibilities and conditions of workplace integration of people with psychosocial disabilities.

Peri-articular steroid injection in total knee arthroplasty: a prospective, double blinded, randomized controlled trial.

Total knee arthroplasty is a painful operation. Peri-articular local anesthetic injections reduce post-operative pain and assist recovery. It is inconclusive whether intra-operative injections of peri-articular corticosteroids are of benefit. Therefore our clinical question was: in patients with osteoarthritis who are undergoing TKA, does the addition of high or low dose corticosteroid to peri-articular injections of local anesthetic and adrenaline improve post-operative pain and range of motion? We performed a prospective, double-blinded, randomized controlled trial of two different doses of triamcinolone acetate (N = 42 in each group) added to local anesthetic in TKA for osteoarthritis. There were no significant differences in pain scores or ROM between the control and corticosteroid groups. Differences in secondary outcomes were also non-significant. Peri-articular corticosteroids do not appear to be of benefit in TKA.

Ecotoxicity of Caffeine as a Bio-Protective Component of Flax-Fiber-Reinforced Epoxy-Composite Building Material.

Caffeine is a verified bio-protective substance in the fight against the biodegradation of cellulose materials, but its ecotoxicity in this context has not yet been studied. For this reason, the ecotoxicity of flax-fiber-reinforced epoxy composite with or without caffeine was tested in the present study. Prepared samples of the composite material were tested on freshwater green algal species (Hematococcus pluvialis), yeasts (Saccharomyces cerevisae), and crustacean species (Daphnia magna). Aqueous eluates were prepared from the studied material (with caffeine addition (12%) and without caffeine and pure flax fibers), which were subjected to chemical analysis for the residues of caffeine or metals. The results indicate the presence of caffeine up to 0.001 mg/L. The eluate of the studied material was fully toxic for daphnids and partially for algae and yeasts, but the presence of caffeine did not increase its toxicity statistically significantly, in all cases. The final negative biological effects were probably caused by the mix of heavy metal residues and organic substances based on epoxy resins released directly from the tested composite material.

Long-term fungal inoculation of Ficus sycomorus and Tectona grandis woods with Aspergillus flavus and Penicillium chrysogenum.

In the current study, two molds, Aspergillus flavus (ACC# LC325160) and Penicillium chrysogenum (ACC# LC325162) were inoculated into two types of wood to be examined using scanning electron microscopy-energy dispersive X-ray (SEM-EDX) and computerized tomography (CT) scanning. Ficus sycomorus, a non-durable wood, and Tectona grandis, a durable wood, were the two wood blocks chosen, and they were inoculated with the two molds and incubated for 36 months at an ambient temperature of 27 ± 2 °C and 70 ± 5% relative humidity (RH). The surface and a 5-mm depth of inoculated wood blocks were histologically evaluated using SEM and CT images. The results showed that A. flavus and P. chrysogenum grew enormously on and inside of F. sycomorus wood blocks, but T. grandis wood displayed resistance to mold growth. The atomic percentages of C declined from 61.69% (control) to 59.33% in F. sycomorus wood samples inoculated with A. flavus while O increased from 37.81 to 39.59%. P. chrysogenum caused the C and O atomic percentages in F. sycomorus wood to drop to 58.43%, and 26.34%, respectively. C with atomic percentages in Teak wood's C content fell from 70.85 to 54.16%, and 40.89%, after being inoculated with A. flavus and P. chrysogenum. The O atomic percentage rose from 28.78 to 45.19% and 52.43%, when inoculated with A. flavus and P. chrysogenum, respectively. Depending on how durable each wood was, The examined fungi were able to attack the two distinct types of wood in various deterioration patterns. T. grandis wood overtaken by the two molds under study appears to be a useful material for a variety of uses.

Pharmacokinetics, Efficacy, and Safety of a SARS-CoV-2 Antibody Treatment in Pediatric Participants: An Open-Label Addendum of a Placebo-Controlled, Randomized Phase 2/3 Trial.

INTRODUCTION: Bamlanivimab and etesevimab (BAM + ETE) are monoclonal antibodies (mAbs) effective in reducing COVID-19-related hospitalizations and all-cause mortality in adult participants at increased risk for severe disease. We present pharmacokinetic (PK), efficacy, and safety results from pediatric participants (< 18 years of age) with COVID-19 who were treated with BAM + ETE. METHODS: In an addendum to the phase 2/3 BLAZE-1 clinical trial (NCT04427501), pediatric participants received open-label weight-based dosing (WBD, n = 94) based on exposure-matching to the authorized dose of BAM + ETE in adult participants. For efficacy and safety assessments, placebo (n = 14) and BAM + ETE (n = 20)-treated adolescent participants (> 12 to < 18 years of age) from the BLAZE-1 trial were included in the overall pediatric population (N = 128). All participants had mild to moderate COVID-19 upon enrollment and ≥ 1 risk factor for severe COVID-19. The primary objective was to characterize the PK of BAM and ETE in the WBD population. RESULTS: The median age of the participants was 11.2 years, 46.1% were female, 57.9% were Black/African American, and 19.7% were Hispanic/Latino. The area under the curve for BAM and ETE in the WBD population was similar to that previously observed in adults. There were no COVID-19-related hospitalizations or deaths. All adverse events (AE) except one were mild or moderate, with one participant reporting a serious AE. CONCLUSION: WBD in pediatric participants achieved similar drug exposures compared to adult participants that received the authorized BAM + ETE dose. The pediatric efficacy and safety data were consistent with adults receiving mAbs for COVID-19. TRIAL REGISTRATION NUMBER: NCT04427501.

Division of labor by dual feedback regulators controls JAK2/STAT5 signaling over broad ligand range.

Cellular signal transduction is governed by multiple feedback mechanisms to elicit robust cellular decisions. The specific contributions of individual feedback regulators, however, remain unclear. Based on extensive time-resolved data sets in primary erythroid progenitor cells, we established a dynamic pathway model to dissect the roles of the two transcriptional negative feedback regulators of the suppressor of cytokine signaling (SOCS) family, CIS and SOCS3, in JAK2/STAT5 signaling. Facilitated by the model, we calculated the STAT5 response for experimentally unobservable Epo concentrations and provide a quantitative link between cell survival and the integrated response of STAT5 in the nucleus. Model predictions show that the two feedbacks CIS and SOCS3 are most effective at different ligand concentration ranges due to their distinct inhibitory mechanisms. This divided function of dual feedback regulation enables control of STAT5 responses for Epo concentrations that can vary 1000-fold in vivo. Our modeling approach reveals dose-dependent feedback control as key property to regulate STAT5-mediated survival decisions over a broad range of ligand concentrations.

[Motives for the use of psychosocial aftercare services]. / Motive für die Inanspruchnahme von psychosozialen Unterstützungsleistungen.

BACKGROUND: There are hardly any studies regarding the specific motives for the use of psychosocial aftercare services. The present study aims to fill this gap by investigating the motives for the use of certain psychosocial aftercare services for people with mental health problems. In particular, the services Ability-Oriented Activity, Mobile Care and Help, Psychosocial Counseling Center and Housing are considered. METHODS: Data from a client satisfaction surveys which had been conducted on an annual basis over a period of 5 years (2013-2017) were analyzed. Clients were surveyed regarding the importance of 5 motives for service use (getting support with problems; being able to talk to someone about problems; feeling understood; having a space of safety; feeling like they are doing something for their health) using a 5-point response scale. RESULTS AND CONCLUSIONS: The analyses of the data show that across all services, the motive "feeling understood" is of great importance for the use of psychosocial services. Apart from this motive, it is primarily safety that motivate the use of services of ability-oriented activity and housing. In the case of Mobile Care and Assistance and the Psychosocial Counseling Center, it is predominantly instrumental aspects, such as getting support with problems. In general, it can be seen that the motivational strength, i.e. how important these reasons are for using the service, is highest for the services provided by Mobile Care and Assistance and the Psychosocial Counseling Center.

Ecotoxicity and Biodegradation of Sustainable Environment-Friendly Bone-Glue-Based Adhesive Suitable for Insulation Materials.

Bone glue with sodium lignosulfonate is a protein-based adhesive. Their combination leads to strong binding necessary for the achievement of adhesive properties. However, biodegradation and ecotoxicity of materials composed of bone glue and sodium lignosulfonate has never been studied before. In this paper, the biodegradation potential of the mixture of bone glue, lignosulfonate and rape straw modified by water or NaOH on an agar test with aerial molds and in acute aquatic tests with mustard, yeasts, algae and crustaceans was analyzed. Epoxy resin as an ecologically unfriendly binder was used as a negative control and pure rape straw as a background. The results indicated that all samples were covered by molds, but the samples containing straw treated by NaOH showed lower biodegradability. The ecotoxicological effects varied among the applied model organisms. Artemia salina was not able to survive and S. alba could not prolong roots in the eluates of all samples (100% inhibition). Freshwater algae (D. subspicatus) were not significantly affected by the samples (max. 12% inhibition, max. 16% stimulation). The biomass of yeasts (S. cerevisae) was strongly stimulated in the presence of eluates in a comparison to control (max. 38% stimulation).

Effects of Secondary Porosity on Microstructure and Mechanical Properties of SAP-Containing Lime-Based Plasters.

Despite the many benefits associated with the utilization of superabsorbent polymers (SAPs), several drawbacks have been reported. In particular, the effect of SAPs on microstructure, together with its consequences for mechanical properties, is not fully understood yet for some composite materials. This study analyzes the role of SAPs in the formation of the microstructure of lime composites, taking into account their chemical composition. The obtained experimental results show that the particle size and cross-linking density of used SAPs are crucial parameters affecting both the microstructure and mechanical performance of the analyzed composites. Coarser SAPs with low cross-linking density in the dosage of 0.5 and 1 wt.% are found as the most suitable solution, leading even to a slight improvement of mechanical parameters. The secondary porosity formed by swelled hydrogels is identified as a very significant factor since hydrogel-filled voids do not contribute to the strength parameters. The formation of the affected zone around SAP cores depends on the chemical composition of SAPs considerably as the higher cross-linking density influences the desorption rate. Based on achieved results, utilization of SAPs in building materials should be studied at a more detailed level with particular importance on the definition of SAP-related voids and affected zone around SAP particles.

Environmental Consequences of Rubber Crumb Application: Soil and Water Pollution.

End-of-life tires are utilized for various purposes, including sports pitches and playground surfaces. However, several substances used at the manufacture of tires can be a source of concerns related to human health or environment's adverse effects. In this context, it is necessary to map whether this approach has the desired effect in a broader relation. While the negative effects on human health were investigated thoroughly and legislation is currently being revisited, the impact on aquatic or soil organisms has not been sufficiently studied. The present study deals with the exposure of freshwater and soil organisms to rubber crumb using the analysis of heavy metal and polycyclic aromatic hydrocarbon concentrations. The obtained results refer to substantial concerns related to freshwater contamination specifically, since the increased concentrations of zinc (7 mg·L-1) and polycyclic aromatic hydrocarbons (58 mg·kg-1) inhibit the growth of freshwater organisms, Desmodesmus subspicatus, and Lemna minor in particular. The performed test with soil organisms points to substantial concerns associated with the mortality of earthworms as well. The acquired knowledge can be perceived as a roadmap to a consistent approach in the implementation of the circular economy, which brings with it a number of so far insufficiently described problems.

One-source peptide/phosphopeptide standards for accurate phosphorylation degree determination.

Reversible protein phosphorylation is a key mediator for intracellular signal transduction. Here we report an innovative method for accurate, site-specific protein phosphorylation degree determination by nanoLC-ESI-MS/MS. A stable isotope-labeled pair of peptide/phosphopeptide standards with volumetrically defined molar ratio is used as reference, providing an internal standard for both the analyte peptide and the phosphopeptide. For the preparation of one-source peptide/phosphopeptide standards, an aliquot of the labeled phosphopeptide standard is quantitatively dephosphorylated, yielding an equimolar solution of the peptide standard. Subsequently, the two solutions are mixed at a 1:1 or other volumetric ratio, which equals the molar ratio. This procedure assures a defined concentration ratio of both components that is independent from their absolute concentration. We demonstrate the applicability of the one-source peptide/phosphopeptide standard method by determining the phosphorylation degree of the signalling proteins STAT5A/B and STAT6.

[Psychosocial After-Care to Increase Quality of Life?] / Verbesserung der Lebensqualität durch psychosoziale Nachsorge?

OBJECTIVE: This study examines to what extent individuals who need psychosocial support actually benefit from the following support services: capability-oriented activities, mobile caring and support, psychosocial counselling centre, and assisted living. Furthermore, the impact of these support services on clients' quality of life is investigated. METHODS: We statistically analysed data (n = 2,099) collected via client satisfaction surveys over five years (2013 to 2017). The clients reported the benefits they experienced regarding various aspects such as living, coping with everyday life, or confidence, as well as their perceived quality of life. RESULTS AND CONCLUSIONS: The data suggest, that psychosocial after-care can improve and stabilize clients' quality of life. Clients of all types of support services reported similar improvements of their quality of life. However, clients from different types of support services reported different kinds of benefits, and, accordingly, improvements in quality of life were predicted from different kinds of benefits.

Tuning the Adhesive Properties of Soy Protein Wood Adhesives with Different Coadjutant Polymers, Nanocellulose and Lignin.

Commercial wood adhesives are based on products that contain formaldehyde; however, environmental and health concerns about formaldehyde emissions from wood products have influenced research and development efforts in order to find alternative, formaldehyde-free products for wood adhesives. In this work, different soy protein-based wood adhesives are proposed, and their performance is compared to commercial urea formaldehyde (UF) adhesive. Soy protein-based wood adhesives were prepared using either soy protein isolate (SPI) or soy protein flour (SF) with different coadjutant polymers: polyethylene oxide (PEO), hydroxypropyl methylcellulose (HPMC), cellulose nanofibrils (CNF) or polyvinyl alcohol (PVA) with and without addition of kraft lignin. The effects of the type of soy protein, solids content, coadjutant polymer and lignin addition were investigated. The wood adhesive formulations were tested on the bonding of hardwood (white maple) and softwood (southern yellow pine) and the dry shear strength of test specimens was measured according to method ASTM D905-08. The adhesive formulations with SPI achieved significantly higher values than those with SF. The dry shear strength of the adhesives varies depending on the coadjutant polymer, the wood species and the addition of lignin.

Microstructure Formation of Cement Mortars Modified by Superabsorbent Polymers.

The utilization of superabsorbent polymers (SAPs) in cement-based materials has been found to be a promising means of mitigating the autogenous propagation of shrinkage and cracks. On the other hand, the undesired effects of SAPs' application on functional properties, including mechanical strength, microstructure formation, and the evolution of hydration heat are not properly understood, given the variety in SAPs' characteristics. To contribute to the present state-of-the-art, cement mortars, modified with two grades of SAPs by dosages of 0.3%, 0.6%, and 0.9%, were designed and studied with emphasis on the relationship between the materials' porosities and mechanical strengths. The obtained results are interpreted by scanning electron microscopy analysis and hydration heat evolution to elucidate the major changes and their driving factors. Besides the benefits associated with the mitigation of autogenous shrinkage, the achieved results point to an adverse effect of supplementation with SAP on mechanical strength at an early age, and an even more pronounced increase at a later age. The employed scanning electron microscopy images, together with mercury-intrusion porosimetry data, depict distortion in the material porosity as a result of the filling of formed voids and the closing of open ends by swelled hydrogels. Only the minor benefit of a greater cross-linking density was obtained by the formation of dense structures and the gains in mechanical strength therefrom.

X-ray computed tomography (CT) and ESEM-EDS investigations of unusual subfossilized juniper cones.

Recent investigations of a Greco-Roman site at Sais have provided well-preserved archaeobotanical remains within a pile of metal fragments. The remains are compared with comparable modern taxa. The morphology and anatomy are studied using Light microscope (LM), Environmental scanning electron microscope (ESEM) and X-ray computed tomography (CT). To investigate the preservation mode, Energy dispersive spectroscopy (EDS) analysis and elemental mapping are conducted. Results revealed that the archaeobotanical remains are exhibiting close affinity with modern juniper cones. Although, the studied archaeobotanical remains are buried for more than 2 millenniums, they underwent early stages of silicification and copper mineralization. These results are discussed in relation to other excavated objects in the find and to our knowledge and understanding of daily life in the Greco-Roman period.

The Effects of Iron Rust on the Ageing of Woods and Their Derived Pulp Paper.

The accelerated ageing of wood in terms of heating or iron rusting has a potential effect on the physio-mechanical, chemical and biological properties of wood. The effects of accelerated ageing on the mechanical, physical and fungal activity properties of some wood materials (Schinus terebinthifolius, Erythrina humeana, Tectona grandis, Pinus rigida and Juglans nigra) were studied after several cycles of heating and iron rusting. The fungal activity was assayed against the growth of Aspergillus terreus, Aspergillus niger, Fusarium culmorum and Stemphylium solani. In addition, the mechanical and optical properties of paper sheets produced from those wood pulps by means of Kraft cooking were evaluated. The mechanical and chemical properties of the studied wood species were affected significantly (p < 0.05) by the accelerated ageing, compared to control woods. With Fourier transform infrared (FTIR) spectroscopy, we detected an increase in the intensity of the spectra of the functional groups of cellulose in the heated samples, which indicates an increase in cellulose content and decrease in lignin content, compared to other chemical compounds. For pulp properties, woods treated by heating showed a decrease in the pulp yield. The highest significant values of tensile strength were observed in pulp paper produced from untreated, heated and iron-rusted P. rigida wood and they were 69.66, 65.66 and 68.33 N·m/g, respectively; we calculated the tear resistance from pulp paper of untreated P. rigida (8.68 mN·m2/g) and T. grandis (7.83 mN·m2/g) and rusted P. rigida (7.56 mN·m2/g) wood; we obtained the values of the burst strength of the pulp paper of untreated woods of P. rigida (8.19 kPa·m2/g) and T. grandis (7.49 kPa·m2/g), as well as the fold number of the pulp paper of untreated, heated and rusted woods from P. rigida, with values of 195.66, 186.33 and 185.66, respectively. After 14 days from the incubation, no fungal inhibition zones were observed. Accelerated ageing (heated or iron-rusted) produced significant effects on the mechanical and chemical properties of the studied wood species and affected the properties of the produced pulp paper.