RESUMO
We investigated the performance of three tenodesis techniques, modified Brunelli, Corella, and scapholunate axis (SLAM) methods in repairing scapholunate interosseous ligament (SLIL) disruption for a type II wrist using finite element-based virtual surgery and compared the results with those of a previous investigation for a type I wrist. In addition, a comparison of the carpal mechanics of type I and type II wrists was undertaken in order to elucidate the difference between the two types. For the type II wrist, following simulated SLIL disruption, the Corella reconstruction technique provided a superior outcome, restoring dorsal gap, volar gap, and SL angle to within 3.5%, 7.1%, and 8.4%, respectively, of the intact wrist. Moreover, application of the ligament reconstruction techniques did not significantly alter the motion pattern of the type II and type I wrists. For the type I wrist, SLIL disruption resulted in no contact between scaphoid-lunate cartilage articulation, whereas for the type II wrist, some contact was maintained. We conclude that the Corella ligamentous reconstruction technique is best able to restore SL gap, angle, and stability following SL ligament injury for both type II and type I wrists and is able to do so without altering wrist kinematics. Our findings also support the view that type I wrists exhibit row behaviour and type II wrists column behaviour. In addition, our analysis suggests that the extra articulation between the lunate and hamate in a type II wrist may help improve stability following SL ligament injury.
Assuntos
Instabilidade Articular/cirurgia , Osso Semilunar/cirurgia , Osso Escafoide/cirurgia , Tenodese , Articulação do Punho/cirurgia , Fenômenos Biomecânicos , Humanos , Instabilidade Articular/diagnóstico por imagem , Osso Semilunar/diagnóstico por imagem , Modelos Biológicos , Movimento (Física) , Procedimentos de Cirurgia Plástica , Osso Escafoide/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Ulna/cirurgia , Articulação do Punho/diagnóstico por imagemRESUMO
BACKGROUND: This paper presents a parametric investigation into the effect of femoroacetabular impingement (FAI) and developmental dysplasia of the hip (DDH) on the sphericity of the femoral supra-equatorial region and acetabulum. METHODS: Radiographic parameters from x-rays, sphericity calculations and visualisation and joint contact area and pressure from FE models of 10 DDH, FAI and normal hips were analysed and compared both within and between hip groups. RESULTS: The sphericity of the acetabulum and femoral head of both the DDH and FAI groups was found to be less than that for normal hips but the variation in sphericity was greater (range 2.4% for normal hips, compared to 3.3% and 3.1% for the FAI and DDH groups respectively). For the DDH group, femoral head sphericity was found to correlate strongly with 2 of the radiographic parameters used to diagnose the condition, CE angle and Sharp angle. For FAI and DDH hips peak contact pressure primarily occurred in Ilizaliturri Zone 2 (anterior-superior region) in the acetabulum and femoral head which corresponded with increased aspherity in this region compared to the normal hip group. These findings correlate with loading and damage patterns reported in the literature. Additionally, our analysis identified a protrusion of bone in Ilizaliturri Zones 1 and 6 (anterior-inferior region) of the acetabulum of a subgroup of FAI hips, whose existence was confirmed using a full-scale hip model fabricated using a 3D printer, which we believe could result in cartilage damage. CONCLUSION: We postulate that such protrusions could potentially explain residual symptoms and unaddressed structural deformity in patients who have undergone FAI surgery.
Assuntos
Acetábulo/diagnóstico por imagem , Impacto Femoroacetabular/diagnóstico , Luxação Congênita de Quadril/cirurgia , Radiografia/métodos , Acetábulo/cirurgia , Adulto , Progressão da Doença , Feminino , Impacto Femoroacetabular/etiologia , Impacto Femoroacetabular/cirurgia , Luxação Congênita de Quadril/complicações , Articulação do Quadril/cirurgia , Humanos , Masculino , Pessoa de Meia-Idade , Estudos RetrospectivosRESUMO
In cases where cemented components are used in total hip arthroplasty, damage, or disruption of the cement mantle can lead to aseptic loosening and joint failure. Currently, the relationship between subject activity level, obesity, and prosthetic femoral head size and the risk of aseptic loosening of the acetabular component in cemented total hip arthroplasty is not well understood. This study aims to provide an insight into this. Finite element models, validated with experimental data, were developed to investigate stresses in the acetabular cement mantle and pelvic bone resulting from the use of three prosthetic femoral head sizes, during a variety of daily activities and one high impact activity (stumbling) for a range of subject body weights. We found that stresses in the superior quadrants of the cortical bone-cement interface increased with prosthetic head size, patient weight, and activity level. In stumbling, average von Mises stresses (22.4 MPa) exceeded the bone cement yield strength for an obese subject (143 kg) indicating that the cement mantle would fail. Our results support the view that obesity and activity level are potential risk factors for aseptic loosening of the acetabular component and provide insight into the increased risk of joint failure associated with larger prosthetic femoral heads. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1771-1783, 2019.
Assuntos
Cimentos Ósseos , Exercício Físico , Prótese de Quadril/estatística & dados numéricos , Obesidade , Falha de Prótese/etiologia , Atividades Cotidianas , Análise de Elementos Finitos , Articulação do Quadril/fisiologia , Humanos , Estresse Mecânico , Suporte de CargaRESUMO
The use of larger prosthetic femoral heads in total hip arthroplasty (THA) has increased considerably in recent years in response to the need to improve joint stability and reduce risk of dislocation. However, data suggests larger femoral heads are associated with higher joint failure rates. For cemented implants, ensuring the continued integrity of the cement mantle is key to long term fixation. This paper describes an investigation into the effect of variation in femoral head size on stresses in the acetabular cement mantle and pelvic bone. Three commonly used femoral head sizes: 28, 32, and 36 mm diameter were investigated. The study was undertaken using a finite element model validated using surface strains obtained from Digital Image Correlation (DIC) during experimentation on a composite hemipelvis implanted with a cemented all-polyethylene acetabular cup. Following validation, the models were used to investigate stresses in the pelvic bone and acetabular cement mantle resulting from two loading scenarios; an average weight subject (700 N) and an overweight subject (1,000 N) undertaking a single leg stand. We found that the highest peak stresses occurred in the anterosuperior and posterosuperior regions of the bone-cement interface, in the line of action of the load, where debonding usually initiates. Stress on the cortical bone-cement interface increased with femoral head diameter by up to 9% whilst stresses in the trabecular bone remained relatively invariant. Our findings may help to explain higher joint failure rates associated with larger femoral heads. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2966-2977, 2018.
Assuntos
Prótese de Quadril , Modelos Biológicos , Estresse Mecânico , Artroplastia de Quadril , Cimentos Ósseos , Análise de Elementos Finitos , Humanos , Ossos Pélvicos/fisiologiaRESUMO
We construct an algebraic-combinatorial model of the SOS compartment of the EGFR biochemical network. A Petri net is used to construct an initial representation of the biochemical decision making network, which in turn defines a hyperdigraph. We observe that the linear algebraic structure of each hyperdigraph admits a canonical set of algebraic-combinatorial invariants that correspond to the information flow conservation laws governing a molecular kinetic reaction network. The linear algebraic structure of the hyperdigraph and its sets of invariants can be generalized to define a discrete algebraic-geometric structure, which is referred to as an oriented matroid. Oriented matroids define a polyhedral optimization geometry that is used to determine optimal subpaths that span the nullspace of a set of kinetic chemical reaction equations. Sets of constrained submodular path optimizations on the hyperdigraph are objectively obtained as a spanning tree of minimum cycle paths. This complete set of subcircuits is used to identify the network pinch points and invariant flow subpaths. We demonstrate that this family of minimal circuits also characteristically identifies additional significant biochemical reaction pattern features. We use the SOS Compartment A of the EGFR biochemical pathway to develop and demonstrate the application of our algebraic-combinatorial mathematical modeling methodology.
Assuntos
Biologia Computacional , Receptores ErbB/metabolismo , Guanosina Trifosfato/metabolismo , Transdução de Sinais/fisiologia , Proteínas ras/metabolismo , Modelos BiológicosRESUMO
We have applied an algorithmic methodology which provably decomposes any complex network into a complete family of principal subcircuits to study the minimal circuits that describe the Krebs cycle. Every operational behavior that the network is capable of exhibiting can be represented by some combination of these principal subcircuits and this computational decomposition is linearly efficient. We have developed a computational model that can be applied to biochemical reaction systems which accurately renders pathways of such reactions via directed hypergraphs (Petri nets). We have applied the model to the citric acid cycle (Krebs cycle). The Krebs cycle, which oxidizes the acetyl group of acetyl CoA to CO(2) and reduces NAD and FAD to NADH and FADH(2), is a complex interacting set of nine subreaction networks. The Krebs cycle was selected because of its familiarity to the biological community and because it exhibits enough complexity to be interesting in order to introduce this novel analytic approach. This study validates the algorithmic methodology for the identification of significant biochemical signaling subcircuits, based solely upon the mathematical model and not upon prior biological knowledge. The utility of the algebraic-combinatorial model for identifying the complete set of biochemical subcircuits as a data set is demonstrated for this important metabolic process.
Assuntos
Algoritmos , Ciclo do Ácido Cítrico/fisiologia , Metabolismo/fisiologia , Modelos Biológicos , Complexos Multienzimáticos/fisiologia , Simulação por Computador , Modelos Químicos , Transdução de Sinais/fisiologiaRESUMO
The surgical treatment of femoroacetabular impingement (FAI) often involves femoral osteochondroplasty. One risk of this procedure is fracture of the femoral neck. We developed a finite element (FE) model to investigate the relationship between depth of resection and femoral neck stress. CT data were used to obtain the geometry of a typical cam-type hip, and a 3D FE model was constructed to predict stress in the head-neck after resection surgery. The model accounted for the forces acting on the head and abductor muscular forces. Bone resection was performed virtually to incremental resection depths. The stresses were calculated for five resection depths and for five different activities (i) standing on one leg (static case); (ii) two-to-one-to-two leg standing; (iii) normal walking; (iv) walking down stairs; and (v) a knee bend. In general, both the average Von Mises stresses and the area of bone that yielded significantly increased at a resection depth of ≥10 mm. The knee bend and walking down stairs demonstrated the highest stresses. The FE model predicts that fracture is likely to occur in the resection area first following removal of a third (10 mm) or more of the diameter of the femoral neck. We suggest that when surgeons perform osteochondroplasty for hip impingement, the depth of resection should be limited to 10 mm.