RESUMO
The protein MakA was discovered as a motility-associated secreted toxin from Vibrio cholerae Here, we show that MakA is part of a gene cluster encoding four additional proteins: MakB, MakC, MakD, and MakE. MakA, MakB, and MakE were readily detected in culture supernatants of wild-type V. cholerae, whereas secretion was very much reduced from a flagellum-deficient mutant. Crystal structures of MakA, MakB, and MakE revealed a structural relationship to a superfamily of bacterial pore-forming toxins. Expression of MakA/B/E in Escherichia coli resulted in toxicity toward Caenorhabditis elegans used as a predatory model organism. None of these Mak proteins alone or in pairwise combinations were cytolytic, but an equimolar mixture of MakA, MakB, and MakE acted as a tripartite cytolytic toxin in vitro, causing lysis of erythrocytes and cytotoxicity on cultured human colon carcinoma cells. Formation of oligomeric complexes on liposomes was observed by electron microscopy. Oligomer interaction with membranes was initiated by MakA membrane binding followed by MakB and MakE joining the assembly of a pore structure. A predicted membrane insertion domain of MakA was shown by site-directed mutagenesis to be essential for toxicity toward C. elegans Bioinformatic analyses revealed that the makCDBAE gene cluster is present as a genomic island in the vast majority of sequenced genomes of V. cholerae and the fish pathogen Vibrio anguillarum We suggest that the hitherto-unrecognized cytolytic MakA/B/E toxin can contribute to Vibrionaceae fitness and virulence potential in different host environments and organisms.
Assuntos
Proteínas de Bactérias/metabolismo , Toxinas Bacterianas/metabolismo , Flagelos/metabolismo , Vibrio cholerae/metabolismo , Animais , Células CACO-2 , Caenorhabditis elegans/metabolismo , Eritrócitos/metabolismo , Escherichia coli , Ilhas Genômicas , Humanos , Lipossomos/metabolismo , Família Multigênica , Vibrio cholerae/genética , VirulênciaRESUMO
PURPOSE/AIM: Corneal injury is a major cause of impaired vision around the globe. The fine structure of the corneal stroma plays a pivotal role in the phenotype and behavior of the embedded cells during homeostasis and healing after trauma or infection. In order to study healing processes in the cornea, it is important to create culture systems that functionally mimic the natural environment. MATERIALS AND METHODS: Collagen solution was vitrified on top of a grated film to achieve thin collagen films with parallel microgrooves. Keratocytes (corneal stromal cells) were cultured on the films either as a single layer or as stacked layers of films and cells. SEM and F-actin staining were used to analyze the pattern transference onto the collagen and the cell orientation on the films. Cell viability was analyzed with MTS and live/dead staining. Keratocytes, fibroblasts, and myofibroblasts were cultured to study the pattern's effect on phenotype. RESULTS: A microstructured collagen film-based culture system that guides keratocytes (stromal cells) to their native, layerwise perpendicular orientation in 3D and that can support fibroblasts and myofibroblasts was created. The films are thin and transparent enough to observe cells at least three layers deep. The cells maintain viability in 2D and 3D cultures and the films can support fibroblast and myofibroblast phenotypes. CONCLUSIONS: The films provide an easily reproducible stroma model that maintains high cell viability and improves the preservation of the keratocyte phenotype in keratocytes that are differentiated to fibroblasts.
Assuntos
Colágeno , Substância Própria , Células Cultivadas , Córnea , Fibroblastos , CicatrizaçãoRESUMO
Mussel wet adhesion is known for its outstanding strength on a variety of surfaces. On the basis of the hypothesis that 3,4-dihydroxyphenylalanine, a catecholic amino acid, governs mussel adhesion, chemists have put much effort into the design of adhesive synthetic polymers containing catechols. However, the exceptional properties exhibited by the native proteins were hardly captured. The attempts to make those polymers stick to wet inorganic surfaces resulted in low adhesive forces. Here we synthesized poly(dopamine acrylamide) and measured the interaction forces with various inorganic surfaces using atomic force microscopy-based single-molecule force spectroscopy. We show that hydroxylation of the surface plays a pivotal role on the formation of strong bonds. We demonstrate that depending on the conditions, the whole range of interactions, from weak interactions to covalent bonds, can come into play.
Assuntos
Bivalves , Adesivos Teciduais , Adesivos , Animais , Catecóis , Di-Hidroxifenilalanina , Polímeros , Propriedades de SuperfícieRESUMO
Understanding antigen-antibody interactions is important to many emerging medical and bioanalytical applications. In particular, the levels of antigen expression at the cell surface may determine antibody-mediated cell death. This parameter has a clear effect on outcome in patients undergoing immunotherapy. In this context, CD20 which is expressed in the membrane of B cells has received significant attention as target for immunotherapy of leukemia and lymphoma using the monoclonal antibody rituximab. To systematically study the impact of CD20 density on antibody recognition, we designed self-assembled monolayers that display tunable CD20 epitope densities. For this purpose, we developed in situ click chemistry to functionalize SPR sensor chips. We find that the rituximab binding affinity depends sensitively and nonmonotonously on CD20 surface density. Strongest binding, with an equilibrium dissociation constant (KD = 32 nM) close to values previously reported from in vitro analysis with B cells (apparent KD between 5 and 19 nM), was obtained for an average inter-antigen spacing of 2 nm. This distance is required for improving rituximab recognition, and in agreement with the known requirement of CD20 to form clusters to elicit a biological response. More generally, this study offers an interesting outlook in the understanding of the necessity of epitope clusters for effective mAb recognition.
Assuntos
Anticorpos Monoclonais/imunologia , Antígenos/imunologia , Química Click , Cinética , Rituximab/imunologia , Ressonância de Plasmônio de SuperfícieRESUMO
The extracellular polysaccharide hyaluronan (HA) is ubiquitous in all vertebrate tissues, where its various functions are encoded in the supramolecular complexes and matrices that it forms with HA-binding proteins (hyaladherins). In tissues, these supramolecular architectures are frequently subjected to mechanical stress, yet how this affects the intermolecular bonding is largely unknown. Here, we used a recently developed single-molecule force spectroscopy platform to analyze and compare the mechanical strength of bonds between HA and a panel of hyaladherins from the Link module superfamily, namely the complex of the proteoglycan aggrecan and cartilage link protein, the proteoglycan versican, the inflammation-associated protein TSG-6, the HA receptor for endocytosis (stabilin-2/HARE), and the HA receptor CD44. We find that the resistance to tensile stress for these hyaladherins correlates with the size of the HA-binding domain. The lowest mean rupture forces are observed for members of the type A subgroup (i.e., with the shortest HA-binding domains; TSG-6 and HARE). In contrast, the mechanical stability of the bond formed by aggrecan in complex with cartilage link protein (two members of the type C subgroup, i.e., with the longest HA-binding domains) and HA is equal or even superior to the high affinity streptavidinâ biotin bond. Implications for the molecular mechanism of unbinding of HAâ hyaladherin bonds under force are discussed, which underpin the mechanical properties of HAâ hyaladherin complexes and HA-rich extracellular matrices.
Assuntos
Ácido Hialurônico/metabolismo , Fenômenos Mecânicos , Receptores de Superfície Celular/metabolismo , Fenômenos Biomecânicos , Modelos Moleculares , Ligação Proteica , Conformação Proteica , Receptores de Superfície Celular/química , Análise EspectralRESUMO
The polysaccharide hyaluronan (HA) is a main component of peri- and extracellular matrix, and an attractive molecule for materials design in tissue engineering and nanomedicine. Here, we study the morphology of complexes that form upon interaction of nanometer-sized amine-coated gold particles with this anionic, linear, and regular biopolymer in solution and grafted to a surface. We find that cationic nanoparticles (NPs) have profound effects on HA morphology on the molecular and supramolecular scale. Quartz crystal microbalance (QCM-D) shows that depending on their relative abundance, cationic NPs promote either strong compaction or swelling of films of surface-grafted HA polymers (HA brushes). Transmission electron and atomic force microscopy reveal that the NPs do also give rise to complexes of distinct morphologies-compact nanoscopic spheres and extended microscopic fibers-upon interaction with HA polymers in solution. In particular, stable and hydrated spherical complexes of single HA polymers with NPs can be prepared when balancing the ionizable groups on HA and NPs. The observed self-assembly phenomena could be useful for the design of drug delivery vehicles and a better understanding of the reorganization of HA-rich synthetic or biological matrices.
Assuntos
Ácido Hialurônico/química , Nanopartículas/química , Aminas/química , Cátions/química , Ouro/química , Tamanho da Partícula , Técnicas de Microbalança de Cristal de Quartzo , Propriedades de SuperfícieRESUMO
Septins are conserved cytoskeletal proteins that regulate cell cortex mechanics. The mechanisms of their interactions with the plasma membrane remain poorly understood. Here, we show by cell-free reconstitution that binding to flat lipid membranes requires electrostatic interactions of septins with anionic lipids and promotes the ordered self-assembly of fly septins into filamentous meshworks. Transmission electron microscopy reveals that both fly and mammalian septin hexamers form arrays of single and paired filaments. Atomic force microscopy and quartz crystal microbalance demonstrate that the fly filaments form mechanically rigid, 12- to 18-nm thick, double layers of septins. By contrast, C-terminally truncated septin mutants form 4-nm thin monolayers, indicating that stacking requires the C-terminal coiled coils on DSep2 and Pnut subunits. Our work shows that membrane binding is required for fly septins to form ordered arrays of single and paired filaments and provides new insights into the mechanisms by which septins may regulate cell surface mechanics.
Assuntos
Membrana Celular/metabolismo , Proteínas de Drosophila/metabolismo , Drosophila melanogaster/metabolismo , Lipídeos de Membrana/metabolismo , Septinas/metabolismo , Animais , Animais Geneticamente Modificados , Membrana Celular/ultraestrutura , Microscopia Crioeletrônica , Proteínas de Drosophila/genética , Proteínas de Drosophila/ultraestrutura , Drosophila melanogaster/genética , Drosophila melanogaster/ultraestrutura , Humanos , Bicamadas Lipídicas , Lipídeos de Membrana/química , Proteínas dos Microfilamentos/genética , Proteínas dos Microfilamentos/metabolismo , Proteínas dos Microfilamentos/ultraestrutura , Microscopia de Força Atômica , Microscopia Eletrônica de Transmissão , Ligação Proteica , Conformação Proteica , Multimerização Proteica , Técnicas de Microbalança de Cristal de Quartzo , Septinas/genética , Septinas/ultraestrutura , Relação Estrutura-AtividadeRESUMO
The biological functions of natural polyelectrolytes are strongly influenced by the presence of ions, which bind to the polymer chains and thereby modify their properties. Although the biological impact of such modifications is well recognized, a detailed molecular picture of the binding process and of the mechanisms that drive the subsequent structural changes in the polymer is lacking. Here, we study the molecular mechanism of the condensation of calcium, a divalent cation, on hyaluronan, a ubiquitous polymer in human tissues. By combining two-dimensional infrared spectroscopy experiments with molecular dynamics simulations, we find that calcium specifically binds to hyaluronan at millimolar concentrations. Because of its large size and charge, the calcium cation can bind simultaneously to the negatively charged carboxylate group and the amide group of adjacent saccharide units. Molecular dynamics simulations and single-chain force spectroscopy measurements provide evidence that the binding of the calcium ions weakens the intramolecular hydrogen-bond network of hyaluronan, increasing the flexibility of the polymer chain. We also observe that the binding of calcium to hyaluronan saturates at a maximum binding fraction of â¼10-15 mol %. This saturation indicates that the binding of Ca2+ strongly reduces the probability of subsequent binding of Ca2+ at neighboring binding sites, possibly as a result of enhanced conformational fluctuations and/or electrostatic repulsion effects. Our findings provide a detailed molecular picture of ion condensation and reveal the severe effect of a few, selective and localized electrostatic interactions on the rigidity of a polyelectrolyte chain.
RESUMO
Atomic force microscopy nanografting was utilized to prepare DNA nanopatches of different sizes (200 x 200 to 1000 x 1000 nm(2)) onto which DNA-protein conjugates can be anchored through DNA-directed immobilization. Height measurements were used to assess the binding of the proteins as well as their subsequent interaction with other components, such as antibodies. The results indicate that nanografted patch arrays are well suited for application in biosensing and could enable the fabrication of multifeature protein nanoarrays.
Assuntos
DNA/química , Nanotecnologia/métodos , Análise de Sequência com Séries de Oligonucleotídeos , Proteínas/química , Enzimas Imobilizadas/química , Etilenoglicol/química , Ouro/química , Microscopia de Força Atômica , Estreptavidina/químicaRESUMO
We present a method to probe molecular and nanoparticle diffusion within thin, solvated polymer coatings. The device exploits the confinement with well-defined geometry that forms at the interface between a planar and a hemispherical surface (of which at least one is coated with polymers) in close contact and uses this confinement to analyze diffusion processes without interference of exchange with and diffusion in the bulk solution. With this method, which we call plane-sphere confinement microscopy (PSCM), information regarding the partitioning of molecules between the polymer coating and the bulk liquid is also obtained. Thanks to the shape of the confined geometry, diffusion and partitioning can be mapped as a function of compression and concentration of the coating in a single experiment. The method is versatile and can be integrated with conventional optical microscopes; thus it should find widespread use in the many application areas exploiting functional polymer coatings. We demonstrate the use of PSCM using brushes of natively unfolded nucleoporin domains rich in phenylalanine-glycine repeats (FG domains). A meshwork of FG domains is known to be responsible for the selective transport of nuclear transport receptors (NTRs) and their macromolecular cargos across the nuclear envelope that separates the cytosol and the nucleus of living cells. We find that the selectivity of NTR uptake by FG domain films depends sensitively on FG domain concentration and that the interaction of NTRs with FG domains obstructs NTR movement only moderately. These observations contribute important information to better understand the mechanisms of selective NTR transport.
Assuntos
Complexo de Proteínas Formadoras de Poros Nucleares , Polímeros , Transporte Ativo do Núcleo Celular , Difusão , Complexo de Proteínas Formadoras de Poros Nucleares/metabolismo , Fenilalanina/metabolismoRESUMO
A new series of dendron-functionalized multiwalled carbon nanotube (MWNT) derivatives, characterized by the presence of numerous positively charged tetraalkyl ammonium salts at the periphery of the dendron, has been synthesized. The positive charges on the MWNT surface, coupled with the unique ability of carbon nanotubes (CNTs) to penetrate cell membranes, make the new derivatives potentially ideal vectors for siRNA delivery. Using a fluorescently labeled, noncoding siRNA sequence, we demonstrate that cytoplasmic delivery of the nucleic acid is remarkably increased throughout the different dendron generations. The work reported here highlights the fact that dendron-functionalized CNTs can be rationally designed as efficient carriers of siRNA that can eventually lead to gene silencing.
Assuntos
Portadores de Fármacos/química , Portadores de Fármacos/síntese química , Nanotubos de Carbono/química , Poliaminas/síntese química , Poliaminas/metabolismo , RNA Interferente Pequeno/metabolismo , Acrilatos/química , Animais , Compostos Azo/química , Transporte Biológico , Citoplasma/metabolismo , Dendrímeros , Etilenodiaminas/química , Inativação Gênica , Células HeLa , Humanos , Poliaminas/química , RNA Interferente Pequeno/genética , Solubilidade , Tiossemicarbazonas/química , Transfecção , Água/químicaRESUMO
Glycosaminoglycans (GAGs), a category of linear, anionic polysaccharides, are ubiquitous in the extracellular space, and important extrinsic regulators of cell function. Despite the recognized significance of mechanical stimuli in cellular communication, however, only few single molecule methods are currently available to study how monovalent and multivalent GAG·protein bonds respond to directed mechanical forces. Here, we have devised such a method, by combining purpose-designed surfaces that afford immobilization of GAGs and receptors at controlled nanoscale organizations with single molecule force spectroscopy (SMFS). We apply the method to study the interaction of the GAG polymer hyaluronan (HA) with CD44, its receptor in vascular endothelium. Individual bonds between HA and CD44 are remarkably resistant to rupture under force in comparison to their low binding affinity. Multiple bonds along a single HA chain rupture sequentially and independently under load. We also demonstrate how strong non-covalent bonds, which are versatile for controlled protein and GAG immobilization, can be effectively used as molecular anchors in SMFS. We thus establish a versatile method for analyzing the nanomechanics of GAG·protein interactions at the level of single GAG chains, which provides new molecular-level insight into the role of mechanical forces in the assembly and function of GAG-rich extracellular matrices.
RESUMO
Addressing the effect of different environmental factors on the adsorption of DNA to solid supports is critical for the development of robust miniaturized devices for applications ranging from biosensors to next generation molecular technology. Most of the time, thiol-based chemistry is used to anchor DNA on gold - a substrate commonly used in nanotechnology - and little is known about the direct interaction between DNA and gold. So far there have been no systematic studies on the direct adsorption behavior of the deoxyribonucleotides (i.e., a nitrogenous base, a deoxyribose sugar, and a phosphate group) and on the factors that govern the DNA-gold bond strength. Here, using single molecule force spectroscopy, we investigated the interaction of the four individual nucleotides, adenine, guanine, cytosine, and thymine, with gold. Experiments were performed in three salinity conditions and two surface dwell times to reveal the factors that influence nucleotide-Au bond strength. Force data show that, at physiological ionic strength, adenine-Au interactions are stronger, asymmetrical and independent of surface dwell time as compared to cytosine-Au and guanine-Au interactions. We suggest that in these conditions only adenine is able to chemisorb on gold. A decrease of the ionic strength significantly increases the bond strength for all nucleotides. We show that moderate ionic strength along with longer surface dwell period suggest weak chemisorption also for cytosine and guanine.
Assuntos
DNA/química , Ouro/química , Nucleotídeos/química , Análise EspectralRESUMO
Nanografted monolayers (NAMs) of DNA show novel physico-chemical properties that make them ideally suited for advanced biosensing applications. In comparison with alternative solid-phase techniques for diagnostic DNA detection, NAMs have the advantage of combining a small size with a high homogeneity of the DNA surface coverage. These two properties favour the extreme miniaturization and ultrasensitivity in high-throughput biosensing devices. The systematic use of NAMs for quantitative DNA (and protein) detection has so far suffered from the lack of a control on key fabrication parameters, such as the ss- or ds-DNA surface coverage. Here we report on a combined experimental-computational study that allows us to estimate the surface density of the grafted DNA by analyzing the sample mechanical response, that is the DNA patch height vs. applied tip load curves. It is shown that the same analysis scheme can be used to detect the occurrence of hybridization with complementary strands in solution and estimate its efficiency. Thanks to these quantitative relationships it is possible to use a single AFM-based setup to: (i) fabricate a DNA NAM, (ii) control the DNA surface coverage, and (iii) characterize its level of hybridization helping the design of NAMs with pre-determined fabrication parameters.
Assuntos
DNA/química , Nanoestruturas/química , Microscopia de Força Atômica , Modelos Teóricos , Hibridização de Ácido Nucleico , Propriedades de SuperfícieRESUMO
Inkjet ink analysis is the best way to discriminate between printed documents, or even though more difficult, to connect an inkjet printed document with a brand or model of printers. Raman spectroscopy and laser desorption mass spectrometry (LDMS) have been demonstrated as powerful tools for dyes and pigments analysis, which are ink components. The aim of this work is to evaluate the aforementioned techniques for inkjet inks analysis in terms of discriminating power, information quality, and nondestructive capability. So, we investigated 10 different inkjet ink cartridges (primary colors and black), 7 from the HP manufacturer and one each from Epson, Canon and Lexmark. This paper demonstrates the capabilities of three methods: Raman spectroscopy, LDMS and MALDI-MS. Raman spectroscopy, as it is preferable to try the nondestructive approach first, is successfully adapted to the analysis of color printed documents in most cases. For analysis of color inkjet inks by LDMS, we show that a MALDI matrix (9-aminoacridine, 9AA) is needed to desorb and to ionize dyes from most inkjet inks (except Epson inks). Therefore, a method was developed to apply the 9AA MALDI matrix directly onto the piece of paper while avoiding analyte spreading. The obtained mass spectra are very discriminating and lead to information about ink additives and paper compositions. Discrimination of black inkjet printed documents is more difficult because of the common use of carbon black as the principal pigment. We show for the first time the possibility to discriminate between two black-printed documents coming from different, as well as from the same, manufacturers. Mass spectra recorded from black inks in positive ion mode LDMS detect polyethylene glycol polymers which have characteristic mass distributions and end groups. Moreover, software has been developed for rapid and objective comparison of the low mass range of these positive mode LDMS spectra which have characteristic unknown peaks.
RESUMO
We demonstrate that, contrary to current understanding, the density of probe molecules is not responsible for the lack of hybridization in high density single-stranded DNA (ss-DNA) self-assembled monolayers (SAMs). To this end, we use nanografting to fabricate well packed ss-DNA nanopatches within a "carpet matrix" SAM of inert thiols on gold surfaces. The DNA surface density is varied by changing the "writing" parameters, for example, tip speed, and number of scan lines. Since ss-DNA is 50 times more flexible than ds-DNA, hybridization leads to a transition to a "standing up" phase. Therefore, accurate height and compressibility measurements of the nanopatches before and after hybridization allow reliable, sensitive, and label-free detection of hybridization. Side-by-side comparison of self-assembled and nanografted DNA-monolayers shows that the latter, while denser than the former, display higher hybridization efficiencies.
Assuntos
DNA/química , Nanoestruturas , Hibridização de Ácido Nucleico , Propriedades de SuperfícieRESUMO
The penetration resistance of a prototypical model-membrane system (HS-(CH2)11-OH self-assembled monolayer (SAM) on Au(111)) to the tip of an atomic force microscope (AFM) is investigated in the presence of different solvents. The compressibility (i.e., height vs tip load) of the HS-(CH2)11-OH SAM is studied differentially, with respect to a reference structure. The reference consists of hydrophobic alkylthiol molecules (HS-(CH2)17-CH3) embedded as nanosized patches into the hydrophilic SAM by nanografting, an AFM-assisted nanolithography technique. We find that the penetration resistance of the hydrophilic SAM depends on the nature of the solvent and is much higher in the presence of water than in 2-butanol. In contrast, no solvent-dependent effect is observed in the case of hydrophobic SAMs. We argue that the mechanical resistance of the hydroxyl-terminated SAM is a consequence of the structural order of the solvent-SAM interface, as suggested by our molecular dynamics simulations. The simulations show that in the presence of 2-butanol the polar head groups of the HS-(CH2)11-OH SAM, which bind only weakly to the solvent molecules, try to bind to each other, disrupting the local order at the interface. On the contrary, in the presence of water the polar head groups bind preferentially to the solvent that, in turn, mediates the release of the surface strain, leading to a more ordered interface. We suggest that the mechanical stabilization effect induced by water may be responsible for the stability of even more complex, real membrane systems.