Bio-based ether solvent and ionic liquid electrolyte for sustainable sodium-air batteries.

Sodium-air batteries (SABs) are receiving considerable attention for the development of next generation battery alternatives due to their high theoretical energy density (up to 1105 W h kg-1). However, most of the studies on this technology are still based on organic solvents; in particular, diglyme, which is highly flammable and toxic for the unborn child. To overcome these safety issues, this research investigates the first use of a branched ether solvent 1,2,3-trimethoxypropane (TMP) as an alternative electrolyte to diglyme for SABs. Through this work, the reactivity of the central tertiary carbon in TMP towards bare sodium metal was identified, while the addition of N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpyr][TFSI]) as a co-solvent proved to be an effective strategy to limit the reactivity. Moreover, a Na-ß-alumina disk was employed for anode protection, to separate the TMP-based electrolyte from the sodium metal. The new cell design resulted in improved cell performance: discharge capacities of up to 1.92 and 2.31 mA h cm-2 were achieved for the 16.6 mol% NaTFSI in TMP and 16.6 mol% NaTFSI in TMP/[C4mpyr][TFSI] compositions, respectively. By means of SEM, Raman and 23Na NMR techniques, NaO2 cubes were identified to be the major discharge product for both electrolyte compositions. Moreover, the hybrid electrolyte was shown to hinder the formation of side-products during discharge - the ratio of NaO2 to side-products in the hybrid electrolyte was 2.4 compared with 0.8 for the TMP-based electrolyte - and a different charge mechanism for the dissolution of NaO2 cubes for each electrolyte was observed. The findings of this work demonstrate the high potential of TMP as a base solvent for SABs, and the importance of careful electrolyte composition design in order to step towards greener and less toxic batteries.

Molecular simulation of glycerol-derived triether podands for lithium ion solvation.

Solvate ionic liquids (ILs) are promising candidates for several applications due to their stability, high coulombic efficiency, and low volatility. In this work, we investigate the solvation of lithium-bistriflimide by different glycerol-derived triether solvents, using molecular dynamics simulations. Very strong interactions between Li+ and the solvent oxygen sites are found, leading to significant conformational changes in the solvent. By comparing the conformation of the neat solvents with their IL mixtures at different concentrations and temperatures, we find that the presence of Li+ induces a distinct crown-like structure in the solvent molecules. The Li+ cations and the surrounding solvent form a podand complex, which is stable even at elevated temperatures. These glycerol-derived solvents exhibit distinct interactions with Li+ cations which may be exploited in electrolytic applications or lithium recovery processes.

1-Propyl-4(5)-Methylimidazole Isomers for Temperature Swing Solvent Extraction.

Temperature swing solvent extraction (TSSE) utilizes an amine solvent with temperature-dependent water solubility to dissolve water at a lower temperature to concentrate or crystallize the brine and the phases are separated. Then, the water in solvent mixture is heated to reduce water solubility and cause phase separation between the solvent and water. The solvent and de-salted water phases are separated, and the regenerated solvent can be recycled. Issues with current TSSE solvents include the high solvent in water solubility and the high solvent volatility. This project used the highly tunable platform molecule imidazole to create two 1-butylimidazole isomers, specifically 1-propyl-4(5)-methylimidazole, to test their effectiveness for TSSE. The imidazoles take in more water than their current state-of-the-art counterparts, but do not desalinate the product water and dissolve in water at higher concentrations. Thus, while imidazoles make intriguing candidates for TSSE, further work is needed to understand how to design imidazoles that will be useful for TSSE applications.

Molecular insight into the anion effect and free volume effect of CO2 solubility in multivalent ionic liquids.

For many years, experimental and theoretical studies have investigated the solubility of CO2 in a variety of ionic liquids (ILs), but the overarching absorption mechanism is still unclear. Currently, two different factors are believed to dominate the absorption performance: (a) the fractional free volume (FFV) accessible for absorption; and (b) the nature of the CO2 interactions with the anion species. The FFV is often more influential than the specific choice of the anion, but neither mechanism provides a complete picture. Herein, we have attempted to decouple these mechanisms in order to provide a more definitive molecular-level perspective of CO2 absorption in IL solvents. We simulate a series of nine different multivalent ILs comprised of imidazolium cations and sulfonate/sulfonimide anions tethered to benzene rings, along with a comprehensive analysis of the CO2 absorption and underlying molecular-level features. We find that the CO2 solubility has a very strong, linear correlation with respect to FFV, but only when comparisons are constrained to a common anion species. The choice of anion results in a fundamental remapping of the correlation between CO2 solubility and FFV. Overall, the free volume effect dominates in the ILs with smaller FFV values, while the choice of anion becomes more important in the systems with larger FFVs. Our proposed mechanistic map is intended to provide a more consistent framework for guiding further IL design for gas absorption applications.

Understanding Carbon Dioxide Solubility in Ionic Liquids by Exploring the Link with Liquid Clathrate Formation.

The solubilities of the quadrupolar molecules benzene and CO2 in various ionic liquids (ILs) are compared in order to determine the connection between aromatic liquid clathrate formation and CO2 dissolution in ILs. It was found that both CO2 Henry's law constants and benzene solubility are remarkably well correlated with each other and with IL molar volume, suggesting both phenomena depend more on the strength of interionic interactions between the ions of an IL rather than the identity of either ion. However, IL ion-quadrupole interactions were found to have an effect for dicyanamide ([N(CN)2 ]- ), where solubility of CO2 and benzene are affected by destabilizing and stabilizing interactions with [N(CN)2 ]- , respectively. The results suggest both solubility phenomena are related to the incorporation of the solute into an IL host network. Aromatic liquid clathrate formation thus has potential as a facile experimental probe for predicting the relative ability of ILs to physisorb CO2 .

Molecular Simulation of Ionic Polyimides and Composites with Ionic Liquids as Gas-Separation Membranes.

Polyimides are at the forefront of advanced membrane materials for CO2 capture and gas-purification processes. Recently, ionic polyimides (i-PIs) have been reported as a new class of condensation polymers that combine structural components of both ionic liquids (ILs) and polyimides through covalent linkages. In this study, we report CO2 and CH4 adsorption and structural analyses of an i-PI and an i-PI + IL composite containing [C4mim][Tf2N]. The combination of molecular dynamics (MD) and grand canonical Monte Carlo (GCMC) simulations is used to compute the gas solubility and the adsorption performance with respect to the density, fractional free volume (FFV), and surface area of the materials. Our results highlight the polymer relaxation process and its correlation to the gas solubility. In particular, the surface area can provide meaningful guidance with respect to the gas solubility, and it tends to be a more sensitive indicator of the adsorption behavior versus only considering the system density and FFV. For instance, as the polymer continues to relax, the density, FFV, and pore-size distribution remain constant while the surface area can continue to increase, enabling more adsorption. Structural analyses are also conducted to identify the nature of the gas adsorption once the ionic liquid is added to the polymer. The presence of the IL significantly displaces the CO2 molecules from the ligand nitrogen sites in the neat i-PI to the imidazolium rings in the i-PI + IL composite. However, the CH4 molecules move from the imidazolium ring sites in the neat i-PI to the ligand nitrogen atoms in the i-PI + IL composite. These molecular details can provide critical information for the experimental design of highly selective i-PI materials as well as provide additional guidance for the interpretation of the simulated adsorption systems.

Tuning the adsorption interactions of imidazole derivatives with specific metal cations.

In this work, we report a computational study of the interactions between metal cations and imidazole derivatives in the gas phase. We first performed a systematic assessment of various density functionals and basis sets for predicting the binding energies between metal cations and the imidazoles. We find that the M11L functional in combination with the 6-311++G(d,p) basis set provides the best compromise between accuracy and computational cost with our metal···imidazole complexes. We then evaluated the binding of a series of metal cations, including Li(+), Na(+), K(+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Ba(2+), Hg(2+), and Pb(2+), with several substituted imidazole derivatives. We find that electron-donating groups increase the metal-binding energy, whereas electron-withdrawing groups decrease the metal-binding energy. Furthermore, the binding energy trends can be rationalized by the hardness of the metal cations and imidazole derivatives, providing a quick way to estimate the metal···imidazole binding strength. This insight can enable efficient screening protocols for identifying effective imidazole-based solvents and membranes for metal adsorption and provide a framework for understanding metal···imidazole interactions in biological systems.

Polymeric ionic liquids containing copper(I) and copper(II) ions as gas chromatographic stationary phases for olefin separations.

Copper(I) ions (Cu+) are used in olefin separations due to their olefin complexing ability and low cost, but their instability in the presence of water and gases limits their widespread use. Ionic liquids (ILs) have emerged as stabilizers of Cu+ ions and prevent their degradation, providing high olefin separation efficiency. There is limited understanding into the role that polymeric ionic liquids (PILs), which possess similar structural characteristics to ILs, have on Cu+ ion-olefin interactions. Moreover, copper ions with diverse oxidation states, including Cu+ and Cu2+ ions, have been rarely employed for olefin separations. In this study, gas chromatography (GC) is used to investigate the interaction strength of olefins to stationary phases composed of the 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C6MIM+][NTf2-]) IL and the poly(1-hexyl-3-vinylimidazolium [NTf2-]) (poly([C6VIM+][NTf2-])) PIL containing monovalent and divalent copper salts (i.e., [Cu+][NTf2-] and [Cu2+]2[NTf2-]). The chromatographic retention of alkenes, alkynes, dienes, and aromatic compounds was examined. Incorporation of the [Cu2+]2[NTf2-] salt into a stationary phase comprised of poly(dimethylsiloxane) resulted in strong retention of olefins, while its addition to the [C6MIM+][NTf2-] IL and poly([C6VIM+][NTf2-]) PIL allowed for the interaction strength to be modulated. Olefins exhibited greater affinities toward IL and PIL stationary phases containing the [Cu2+]2[NTf2-] salt compared to those with the [Cu+][NTf2-] salt. Elimination of water from both copper salts was observed to be an important factor in promoting olefin interactions, as evidenced by increased olefin retention upon exposure of the stationary phases to high temperatures. To evaluate the long-term thermal stability of the stationary phase, chromatographic retention of probes was measured on the [Cu2+]2[NTf2-]/[C6MIM+][NTf2-] IL stationary phase after its exposure to helium at a temperature of 110 °C.

Comparison of olefin/paraffin separation by ionic liquid and polymeric ionic liquid stationary phases containing silver(I) ion using one-dimensional and multidimensional gas chromatography.

Silver(I) ions have been used in various studies as components within polymer membranes or ionic liquids (ILs) to enable separation of olefins from paraffins. Polymeric ionic liquids (PILs) are a class of polymers synthesized from IL monomers and typically possess higher thermal and chemical stability than the ILs from which they are formed. Until now, very little is known about the difference in strength of silver(I) ion-olefin interactions when they take place in an IL compared to a PIL. In this work, the chromatographic separation of olefins by stationary phases composed of silver(I) bis[(trifluoromethyl)sulfonyl]imide ([Ag+][NTf2-]) incorporated into the 1-hexyl-3-methylimidazolium NTf2 ([HMIM+][NTf2-]) IL and poly(1-hexyl-3-vinylimidazolium NTf2) (poly([HVIM+][NTf2-])) PIL at varying concentrations was investigated. Olefins were more highly retained by silver(I) ions in PILs than in ILs as the silver(I) salt concentration in the stationary was increased. The potential separation power of silver(I)-containing IL and PIL stationary phases in comprehensive two-dimensional gas chromatography (GC×GC) was compared to the conventional one-dimensional system. The separation selectivity of alkenes and alkynes from paraffins was significantly increased, while dienes and aromatic compounds showed insignificant changes in retention. The chemical structural features of IL and PIL that enhance silver(I) ion stability and olefin separation were investigated by using silver(I) trifluoromethanesulfonate ([Ag+][OTf-]), 1-decyl-3-methylimidazolium NTf2 ([DMIM+][NTf2-]) IL, poly(1-decyl-3-vinylimidazolium NTf2 (poly([DVIM+][NTf2-])) PIL, [HMIM+][OTf-] IL and poly([HVIM+][OTf-]) PIL. Longer alkyl substituents appended to the IL (and PIL) cation increased the strength of silver(I) olefin interaction, and [OTf-] anions in the IL (and PIL) tended to preserve silver(I) ion from thermal reduction, while also retaining olefins less than the [NTf2-]-containing columns. In general, silver(I) ions in PILs possessing analogous chemical structures to ILs exhibited higher silver(I) ion-olefin interaction strength but were less thermally stable.

Enhancing CO2 Transport Across a PEEK-Ionene Membrane and Water-Lean Solvent Interface.

Efficient direct air capture (DAC) of CO2 will require strategies to deal with the relatively low concentration in the atmosphere. One such strategy is to employ the combination of a CO2 -selective membrane coupled with a CO2 capture solvent acting as a draw solution. Here, the interactions between a leading water-lean carbon-capture solvent, a polyether ether ketone (PEEK)-ionene membrane, CO2 , and combinations were probed using advanced NMR techniques coupled with advanced simulations. We identify the speciation and dynamics of the solvent, membrane, and CO2 , presenting spectroscopic evidence of CO2 diffusion through benzylic regions within the PEEK-ionene membrane, not spaces in the ionic lattice as expected. Our results demonstrate that water-lean capture solvents provide a thermodynamic and kinetic funnel to draw CO2 from the air through the membrane and into the bulk solvent, thus enhancing the performance of the membrane. The reaction between the carbon-capture solvent and CO2 produces carbamic acid, disrupting interactions between the imidazolium (Im+ ) cations and the bistriflimide anions within the PEEK-ionene membrane, thereby creating structural changes through which CO2 can diffuse more readily. Consequently, this restructuring results in CO2 diffusion at the interface that is faster than CO2 diffusion in the bulk carbon-capture solvent.

Poly(ionic liquid)s with Dicationic Pendants as Gas Separation Membranes.

Poly(norbornene)s and poly(ionic liquid)s are two different classes of attractive materials, which are known for their structural tunability and thermal stabilities, and have been extensively studied as gas separation membranes. The incorporation of ionic liquids (ILs) into the poly(norbornene) through post-polymerization has resulted in unique materials with synergistic properties. However, direct polymerization of norbornene-containing IL monomers as gas separation membranes are limited. To this end, a series of norbornene-containing imidazolium-based mono- and di-cationic ILs (NBM-mIm and NBM-DILs) with different connectivity and spacer lengths were synthesized and characterized spectroscopically. Subsequently, the poly(NBM-mIm) with bistriflimide [Tf2N-] and poly([NBM-DILs][Tf2N]2) comprising homo-, random-, and block- (co)polymers were synthesized via ring-opening metathesis polymerization using the air-stable Grubbs second-generation catalyst. Block copolymers (BCPs), specifically, [NBM-mIM][Tf2N] and [NBM-ImCnmIm] [Tf2N]2 (n = 4 and 6) were synthesized at two different compositions, which generated high molecular weight polymers with decent solubility relative to homo- and random (co)polymers of [NBM-DILs] [Tf2N]2. The prepared BCPs were efficiently analyzed by a host of analytical tools, including 1H-NMR, GPC, and WAXD. The successfully BCPs were cast into thin membranes ranging from 47 to 125 µm and their gas (CO2, N2, CH4, and H2) permeations were measured at 20 °C using a time-lag apparatus. These membranes displayed modest CO2 permeability in a non-linear fashion with respect to composition and a reverse trend in CO2/N2 permselectivity was observed, as a usual trade-off behavior between permeability and permselectivity.

Room-temperature ionic liquids and composite materials: platform technologies for CO(2) capture.

Clean energy production has become one of the most prominent global issues of the early 21st century, prompting social, economic, and scientific debates regarding energy usage, energy sources, and sustainable energy strategies. The reduction of greenhouse gas emissions, specifically carbon dioxide (CO(2)), figures prominently in the discussions on the future of global energy policy. Billions of tons of annual CO(2) emissions are the direct result of fossil fuel combustion to generate electricity. Producing clean energy from abundant sources such as coal will require a massive infrastructure and highly efficient capture technologies to curb CO(2) emissions. Current technologies for CO(2) removal from other gases, such as those used in natural gas sweetening, are also capable of capturing CO(2) from power plant emissions. Aqueous amine processes are found in the vast majority of natural gas sweetening operations in the United States. However, conventional aqueous amine processes are highly energy intensive; their implementation for postcombustion CO(2) capture from power plant emissions would drastically cut plant output and efficiency. Membranes, another technology used in natural gas sweetening, have been proposed as an alternative mechanism for CO(2) capture from flue gas. Although membranes offer a potentially less energy-intensive approach, their development and industrial implementation lags far behind that of amine processes. Thus, to minimize the impact of postcombustion CO(2) capture on the economics of energy production, advances are needed in both of these areas. In this Account, we review our recent research devoted to absorptive processes and membranes. Specifically, we have explored the use of room-temperature ionic liquids (RTILs) in absorptive and membrane technologies for CO(2) capture. RTILs present a highly versatile and tunable platform for the development of new processes and materials aimed at the capture of CO(2) from power plant flue gas and in natural gas sweetening. The desirable properties of RTIL solvents, such as negligible vapor pressures, thermal stability, and a large liquid range, make them interesting candidates as new materials in well-known CO(2) capture processes. Here, we focus on the use of RTILs (1) as absorbents, including in combination with amines, and (2) in the design of polymer membranes. RTIL amine solvents have many potential advantages over aqueous amines, and the versatile chemistry of imidazolium-based RTILs also allows for the generation of new types of CO(2)-selective polymer membranes. RTIL and RTIL-based composites can compete with, or improve upon, current technologies. Moreover, owing to our experience in this area, we are developing new imidazolium-based polymer architectures and thermotropic and lyotropic liquid crystals as highly tailorable materials based on and capable of interacting with RTILs.

Understanding Gas Solubility of Pure Component and Binary Mixtures within Multivalent Ionic Liquids from Molecular Simulations.

Understanding the molecular-level solubility of CO2 and its mixtures is essential to the progress of gas-treating technologies. Herein, we use grand canonical Monte Carlo simulations to study the single-component gas absorption of SO2, N2, CH4, and H2 and binary mixtures of CO2/SO2, CO2/N2, CO2/CH4, and CO2/H2 of varying mole fractions within multivalent ionic liquids (ILs). Our results highlight the importance of the free volume effect and the anion effect when interpreting the absorption behavior of these mixtures, similar to the behavior of CO2 found in our previous study (Phys. Chem. Chem. Phys. 2020, 22, 20618-20633). The deviation of gas solubility between the pure component absorption versus the binary absorption, as well as the solubility selectivity, highlights the importance of the relative affinity of gas species within a mixture to the different anions. The absorption selectivity within a specific IL system can be predicted based on the relative gas affinity to the anion.

Emerging iongel materials towards applications in energy and bioelectronics.

In the past two decades, ionic liquids (ILs) have blossomed as versatile task-specific materials with a unique combination of properties, which can be beneficial for a plethora of different applications. The additional need of incorporating ILs into solid devices led to the development of a new class of ionic soft-solid materials, named here iongels. Nowadays, iongels cover a wide range of materials mostly composed of an IL component immobilized within different matrices such as polymers, inorganic networks, biopolymers or inorganic nanoparticles. This review aims at presenting an integrated perspective on the recent progress and advances in this emerging type of material. We provide an analysis of the main families of iongels and highlight the emerging types of these ionic soft materials offering additional properties, such as thermoresponsiveness, self-healing, mixed ionic/electronic properties, and (photo)luminescence, among others. Next, recent trends in additive manufacturing (3D printing) of iongels are presented. Finally, their new applications in the areas of energy, gas separation and (bio)electronics are detailed and discussed in terms of performance, underpinning it to the structural features and processing of iongel materials.

Screening Ionic Liquids Based on Ionic Volume and Electrostatic Potential Analyses.

Ionic liquids (ILs) are known to have tunable solvation properties, based on the pairing of different anions and cations, but the compositional landscape is vast and challenging to navigate efficiently. Some computational screening protocols are available, but they can be either time-consuming or difficult to implement. Herein, we perform a detailed investigation of the fundamental role of electrostatic interactions in these systems. We effectively develop a bridge between the previous volume-based approach with a quantum structure-property relationship approach to create fast, simple screening guidelines. We propose a new parameter that is applicable to both monovalent and multivalent ions, the ionic polarity index (IPI), which is defined as the ratio of the average electrostatic surface potential (V̅) of the ion to the net charge of the ion (q). The IPI correlation has been tested on a diverse data set of 121 ions, and reliable predictions can be obtained within a homologous series of IL compounds.

Solubility Behavior of CO2 in Ionic Liquids Based on Ionic Polarity Index Analyses.

Ionic liquids (ILs) can serve as effective CO2 solvents with an appropriate selection of different anions and cations. However, due to the large library of potential IL compositions, rapid screening methods are needed for characterizing and ranking the expected properties. We have recently proposed the ionic polarity index (IPI) parameter, effectively connecting volume-based approaches and electrostatic potential analyses and providing a single metric that can potentially be used to rapidly screen for desirable IL properties. In this work, the corresponding anion and cation IPIs are used to generate correlations with respect to the CO2 volumetric solubility in ILs. The relationships are generally applicable to groups of ILs within a homologous ion series, and this can be particularly valuable for prescreening different ion pairings for maximizing gas solvation performance.

Design and Gas Separation Performance of Imidazolium Poly(ILs) Containing Multivalent Imidazolium Fillers and Crosslinking Agents.

This work introduces a series of vinyl-imidazolium-based polyelectrolyte composites, which were structurally modified via impregnation with multivalent imidazolium-benzene ionic liquids (ILs) or crosslinked with novel cationic crosslinkers which possess internal imidazolium cations and vinylimidazolium cations at the periphery. A set of eight [C4vim][Tf2N]-based membranes were prepared via UV-initiated free radical polymerization, including four composites containing di-, tri-, tetra-, and hexa-imidazolium benzene ILs and four crosslinked derivatives which utilized tri- and tetra- vinylimidazolium benzene crosslinking agents. Structural and functional characterizations were performed, and pure gas permeation data were collected to better understand the effects of "free" ILs dispersed in the polymeric matrix versus integrated ionic crosslinks on the transport behaviors of these thin films. These imidazolium PIL:IL composites exhibited moderately high CO2 permeabilities (~20-40 Barrer), a 4-7× increase relative to corresponding neat PIL, with excellent selectivities against N2 or CH4. The addition of imidazolium-benzene fillers with increased imidazolium content were shown to correspondingly enhance CO2 solubility (di- < tri- < tetra- < hexa-), with the [C4vim][Tf2N]: [Hexa(Im+)Benz ][Tf2N] composite showing the highest CO2 permeability (PCO2 = 38.4 Barrer), while maintaining modest selectivities (αCO2/CH4 = 20.2, αCO2/N2 = 23.6). Additionally, these metrics were similarly improved with the integration of more ionic content bonded to the polymeric matrix; increased PCO2 with increased wt% of the tri- and tetra-vinylimidazolium benzene crosslinking agent was observed. This study demonstrates the intriguing interactions and effects of ionic additives or crosslinkers within a PIL matrix, revealing the potential for the tuning of the properties and transport behaviors of ionic polymers using ionic liquid-inspired small molecules.

A comparison of fluoroalkyl-derivatized imidazolium:TFSI and alkyl-derivatized imidazolium:TFSI ionic liquids: a molecular dynamics simulation study.

Molecular dynamics simulations of fluoroalkyl-derivatized imidazolium:bis(trifluoromethylsulfonyl)imide (TFSI) room temperature ionic liquids (FADI-RTILs) with cations of the structure 1-F(CF(2))(n)(CH(2))(2)-3-methyl imidazolium have been performed and compared with simulations of alkyl-derivatized 1-H(CH(2))(n+2)-3-methyl imidazolium analogs (ADI-RTILs). Simulations yield RTIL densities, viscosities and ionic conductivities for the FADI-RTILs and ADI-RTILs in reasonably good agreement with experimental data. Partial fluorination results in a larger increase in density than would be anticipated based upon the density difference between perfluoralkane and alkane melts. Similarly, the slowing down in dynamics upon partial fluorination is greater than would be expected based upon the increase in cation volume. Examination of cation-cation, anion-anion and cation-anion centers-of-mass radial distribution functions reveal remarkably little influence of partial fluorination on the spherically averaged intermolecular structure of the RTILs. Similarly, simulations reveal little change in tail conformations and the extent of tail-tail aggregation upon partial fluorination. The interaction of the TFSI anion with the positively charged imidazolium ring hydrogen and nitrogen atoms is also little influenced by partial fluorination. However, the partially fluorinated alkyl tail exhibits increased interaction with the TFSI anion due to the electron withdrawing character of the fluorinated groups. We believe this strong tail-anion electrostatic interaction largely accounts for the higher than expected density and slower than expected dynamics in the FADI-RTILs.

Valorization of Plastic Wastes for the Synthesis of Imidazolium-Based Self-Supported Elastomeric Ionenes.

Imidazolium-based ionenes are known to be high-performance materials for a great variety of applications. The preparation of these polymers requires the use of bis-imidazole starting monomers, which are commonly prepared by using toxic chloride reagents. In this study, bis-imidazole monomers are synthesized by organocatalytic chemical recycling of discarded plastics through chemical depolymerization. By using poly(ethylene terephthalate) and bisphenol A polycarbonate as starting materials, different monomers containing amide or urea functionalities are prepared to produce high-molecular-weight ionic polymers. These novel ionenes show excellent elastomeric and self-healing behavior, serving as a promising means to expand the exploration of plastic wastes as a source of new materials.

Synthesis and Performance of Aromatic Polyamide Ionenes as Gas Separation Membranes.

Here, we report the synthesis and thermophysical properties of seven primarily aromatic, imidazolium-based polyamide ionenes. The effects of varied para-, meta-, and ortho-connectivity, and spacing of ionic and amide functional groups, on structural and thermophysical properties were analyzed. Suitable, robust derivatives were cast into thin films, neat, or with stoichiometric equivalents of the ionic liquid (IL) 1-benzy-3-methylimidazolium bistriflimide ([Bnmim][Tf2N]), and the gas transport properties of these membranes were measured. Pure gas permeabilities and permselectivities for N2, CH4, and CO2 are reported. Consistent para-connectivity in the backbone was shown to yield the highest CO2 permeability and suitability for casting as a very thin, flexible film. Derivatives containing terephthalamide segments exhibited the highest CO2/CH4 and CO2/N2 selectivities, yet CO2 permeability decreased with further deviation from consistent para-linkages.