Bioactive Carboxymethyl Cellulose (CMC)-Based Films Modified with Melanin and Silver Nanoparticles (AgNPs)-The Effect of the Degree of CMC Substitution on the In Situ Synthesis of AgNPs and Films' Functional Properties.

Green synthesis of nanoparticles for use in food packaging or biomedical applications is attracting increasing interest. In this study, the effect of the degree of substitution (0.7, 0.9 and 1.2) of a carboxymethylcellulose polymer matrix on the synthesis and properties of silver nanoparticles using melanin as a reductant was investigated. For this purpose, the mechanical, UV-Vis barrier, crystallinity, morphology, antioxidant and antimicrobial properties of the films were determined, as well as the color and changes in chemical bonds. The degree of substitution effected noticeable changes in the color of the films (the L* parameter was 2.87 ± 0.76, 5.59 ± 1.30 and 13.45 ± 1.11 for CMC 0.7 + Ag, CMC 0.9 + Ag and CMC 1.2 + Ag samples, respectively), the UV-Vis barrier properties (the transmittance at 280 nm was 4.51 ± 0.58, 7.65 ± 0.84 and 7.98 ± 0.75 for CMC 0.7 + Ag, CMC 0.9 + Ag and CMC 1.2 + Ag, respectively) or the antimicrobial properties of the films (the higher the degree of substitution, the better the antimicrobial properties of the silver nanoparticle-modified films). The differences in the properties of films with silver nanoparticles synthesized in situ might be linked to the increasing dispersion of silver nanoparticles as the degree of CMC substitution increases. Potentially, such films could be used in food packaging or biomedical applications.

Packaging Covered with Antiviral and Antibacterial Coatings Based on ZnO Nanoparticles Supplemented with Geraniol and Carvacrol.

The purpose of the study was to obtain an external coating based on nanoparticles of ZnO, carvacrol, and geraniol that could be active against viruses such as SARS-Co-V2. Additionally, the synergistic effect of the chosen substances in coatings was analyzed. The goal of the study was to measure the possible antibacterial activity of the coatings obtained. Testing antiviral activity with human pathogen viruses, such as SARS-Co-V2, requires immense safety measures. Bacteriophages such as phi 6 phage represent good surrogates for the study of airborne viruses. The results of the study indicated that the ZC1 and ZG1 coatings containing an increased amount of geraniol or carvacrol and a very small amount of nanoZnO were found to be active against Gram-positive and Gram-negative bacteria. It is also important that a synergistic effect between these active substances was noted. This explains why polyethylene (PE) films covered with the ZC1 or ZG1 coatings (as internal coatings) were found to be the best packaging materials to extend the quality and freshness of food products. The same coatings may be used as the external coatings with antiviral properties. The ZC1 and ZG1 coatings showed moderate activity against the phi 6 phage that has been selected as a surrogate for viruses such as coronaviruses. It can be assumed that coatings ZG1 and ZC1 will also be active against SARS-CoV-2 that is transmitted via respiratory droplets.

The Effect of Fermentation with Kefir Grains on the Physicochemical and Antioxidant Properties of Beverages from Blue Lupin (Lupinus angustifolius L.) Seeds.

Plant derived fermented beverages have recently gained consumers' interest, particularly due to their intrinsic functional properties and presence of beneficial microorganisms. Three variants containing 5%, 10%, and 15% (w/w) of sweet blue lupin (Lupinus angustifolius L. cv. "Boregine") seeds were inoculated with kefir grains and incubated at 25 °C for 24 h. After processing, beverages were stored in refrigerated conditions (6 °C) for 21 days. Changes in microbial population, pH, bioactive compounds (polyphenolics, flavonoids, ascorbic acid), reducing sugars, and free amino acids were estimated. Additionally, viscosity, firmness, color, and free radicals scavenging properties were determined. Results showed that lactic acid bacteria as well as yeast were capable of growing well in the lupin matrix without any supplementation. During the process of refrigeration, the viability of the microorganisms was over the recommended minimum level for kefir products. Hydrolysis of polysaccharides as well as increase of free amino acids was observed. As a result of fermentation, the beverages showed excellent DPPH, ABTS+·, ·OH, and O2- radicals scavenging activities with a potential when considering diseases associated with oxidative stress. This beverages could be used as a new, non-dairy vehicle for beneficial microflora consumption, especially by vegans and lactose-intolerant consumers.

Effects of starch type and concentration on the physicochemical properties of bilayer-stabilized oil-in-water emulsion gels enriched with ß-1,3/1,6-D-glucans.

BACKGROUND: In recent years, consumer interest in low-fat foodstuffs having a clean label and potential benefits over physiological functions has shown a growing trend. ß-1,3/1,6-d-Glucans (BGs) from Saccharomyces cerevisiae have been recognized as excellent immune-modulating compounds. Bilayer-stabilized oil-in-water emulsion gels (BEGs) containing oil droplets covered by myofibrillar proteins-gum arabic membranes were used for entrapping BGs in the inner phase. This study investigated the effects of starch type (waxy maize starch, WMS; potato starch, PS) and concentration (0.0-50 g kg-1 ) on the physicochemical properties of BEGs composed of: 200 g kg-1 rapeseed oil, 40 g kg-1 myofibrillar proteins, 14 g kg-1 gum arabic, 15 g kg-1 BGs, 1 g kg-1 citric acid. RESULTS: The results showed that BGs were successfully incorporated into the inner phase of BEGs and stability testing showed no separated oil and sediment layer. BEGs were characterized by droplet diameter of d3,2 = 3.62 ± 0.209 µm and electrical charge of the outer membrane of -27.4 ± 0.257 mV. Increasing starch concentration significantly (P < 0.05) affected values of the studied rheological parameters, but to a greater extent in relation to PS than WMS. Sensory analysis showed that BEGs were most desirable at WMS and PS concentrations of 40-50 and 30-40 g kg-1 , respectively. CONCLUSIONS: BEGs containing oil droplets covered by myofibrillar proteins-gum arabic membranes can be used as carriers for insoluble ß-glucans and manufactured with a wide range of rheological properties and sensory features desired by consumers. © 2020 Society of Chemical Industry.

The influence of thermal hydrolysis process on emulsifying properties of potato protein isolate.

The article considers the influence of the thermal hydrolysis process on emulsifying properties and viscosity of potato protein isolates. During the study, there was demonstrated a significant improvement in emulsifying properties of the protein isolates as a result of denaturation. Thermal hydrolysis process includes high temperature and pressure. The improvement in emulsion stability maintained in some variants up to a week has been observed. Significant correlations were found between emulsification activity and emulsion stability after 1 week (p > 0.05). The rheological measurement showed an increase in viscosity after HPP. As the proposed method of the protein isolate modification does not affect the chemical composition of the protein solution, but only its molecular structure, it enables to increase the emulsifying properties in a simple and cost-effective way.

The Influence of Accelerated UV-A and Q-SUN Irradiation on the Antimicrobial Properties of Coatings Containing ZnO Nanoparticles.

The influence of accelerated UV-A and Q-SUN irradiation on the antimicrobial properties of coatings containing ZnO nanoparticles was investigated using a polyethylene (PE) film covering. The results of the study showed that Methyl Hydroxypropyl Celluloses (MHPC) coatings did not influence the growth of S. aureus, B. cereus, E. coli, P. aeruginosa or C. albicans cells. MHPC coatings containing ZnO nanoparticles inhibited the growth of bacterial strains and reduced the number of C. albicans strains. Accelerated Q-SUN and UV-A irradiation had no influence on the antimicrobial effect of nano ZnO coatings against S. aureus, B. cereus and E. coli. Q-SUN irradiation decreased the activity of MHPC coatings containing nanoparticles against P. aeruginosa and C. albicans. An FT-IR analysis clearly showed that ZnO nanoparticles shielded the MHPC coating during Q-SUN irradiation.

Novel Milk Substitute Based on Pea, Bean and Sunflower Seeds with Natural Bioactive Stabilisers.

The aim of this research was to create a plant-based beverage based on seeds of sunflower (Helianthus annuus), pea (Pisum sativum) and runner bean (Phaseolus multiflorus). The selection of the ingredients was based on the main objective to obtain the nutritional value and sensory characteristics of a formed product similar to cow's milk. The ingredient proportions were created by comparing the protein, fat and carbohydrate content of seeds versus cow's milk. Due to the observed low long-term stability of plant-seed-based drinks, a water binding guar gum, a thickener in the form of locust bean gum and gelling citrus amidated pectin containing dextrose were added and evaluated as functional stabilisers. All of the designed and created systems were subjected to selected methods of characterisation of the most important final product properties, such as rheology, colour, emulsion and turbidimetric stability. Rheological analysis confirmed the highest stability of the variant supplemented with 0.5% guar gum. Both stability and colour measurements indicated the positive characteristics of the system supplemented with 0.4% pectin. Finally, the product with 0.5% guar gum was identified as the most distinctive and similar vegetable drink to cow's milk.

Alginate Biofunctional Films Modified with Melanin from Watermelon Seeds and Zinc Oxide/Silver Nanoparticles.

Bioactive films find more and more applications in various industries, including packaging and biomedicine. This work describes the preparation, characterization and physicochemical, antioxidant and antimicrobial properties of alginate films modified with melanin from watermelon (Citrullus lanatus) seeds at concentrations of 0.10%, 0.25% and 0.50% w/w and with silver and zinc oxide nanoparticles (10 mM film casting solutions for both metal nanoparticles). Melanin served as the active ingredient of the film and as a nanoparticle stabilizer. The additives affected the color, antioxidant (~90% ABTS and DPPH radicals scavenging for all melanin modified films) and antimicrobial activity (up to 4 mm grow inhibition zones of E. coli and S. aureus for both zinc oxide and silver nanoparticles), mechanical (silver nanoparticles addition effected two-fold higher tensile strength), thermal and barrier properties for water and UV-vis radiation. The addition of ZnONP resulted in improved UV barrier properties while maintaining good visible light transmittance, whereas AgNP resulted in almost complete UV barrier and reduced visible light transmittance of the obtained films. What is more, the obtained films did not have an adverse effect on cell viability in cytotoxicity screening. These films may have potential applications in food packaging or biomedical applications.

Antioxidative Effect of Sage (Salvia officinalis L.) Macerate as "Green Extract" in Inhibiting the Oxidation of Fish Oil.

The aim of the study was to assess the antioxidant effect of concentrated oil macerate of sage (M) as a "green extract" in inhibiting the oxidation of Fish Oil (FO). In the homogenization-assisted maceration process, FO was used as a solvent for the sage active substances to produce M, which was then added to FO (25% w/w) and evaluated for its effect by monitoring the level of oxidation during refrigerated and room temperature storage. The macerate also examined polyphenols, plant pigments, DPPH antioxidant potential, oxidation level and sensory quality. It was shown that the maceration process made it possible to obtain aromatized M, containing polyphenols (carnosic acid, carnosol) and pigments, but with an increased level of peroxides, free fatty acids, compared to the control oil. M showed antioxidant properties and inhibited FO oxidation. It showed the best efficiency in FO during refrigerated storage, in the third month it reduced the level of peroxides by about 9 times, compared to the control. M retains unchanged quality at refrigerated temperature for up to 3 months. Sage macerates are "green extracts" that can be used as effective natural antioxidant additives, following preparation improvements to reduce the amount of peroxide formed.

Development and Characterization of Bioactive Poly(butylene-succinate) Films Modified with Quercetin for Food Packaging Applications.

The preparation of biodegradable active packaging materials is still a major challenge. Here, we report the fabrication and characterization of poly(butylene succinate)-based (PBS) films enriched with a natural polyphenolic antioxidant-quercetin. The PBS-based films with various quercetin content (0.05; 0.10; 0.25 and 0.50 pph on PBS) were prepared via a solvent casting method. Physical (optical, mechanical, thermal, moisture and water sorption, water vapor and UV-vis barrier) and biofunctional (antioxidant and antibacterial against Escherichia coli and Staphylococcus aureus) film properties were tested. The migration of quercetin into model food liquid systems was determined. As a result of quercetin addition, significant changes in color, opacity and UV-blocking effect were observed. The presence of the active substance did not significantly affect the thermal properties of the PBS matrix. However, the mechanical properties of the films were slightly decreased. The films exhibited excellent free radicals (DPPH, ABTS, O2-) scavenging and some bactericidal activities. PBS-quercetin films with superior functional properties have many possibilities for active food packaging applications.

Antimicrobial, Antibiofilm, and Antioxidant Activity of Functional Poly(Butylene Succinate) Films Modified with Curcumin and Carvacrol.

The use of food industry waste as bioactive compounds in the modification of biodegradable films as food packaging remains a major challenge. This study describes the preparation and bioactivity characterization of poly(butylene succinate) (PBS)-based films with the addition of the bioactive compounds curcumin (CUR) and carvacrol (CAR). Films based on PBS modified with curcumin and carvacrol at different concentration variations (0%/0.1%/1%) were prepared by solvent casting method. The antioxidant, antimicrobial, and antibiofilm properties were investigated against bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Candida albicans). As a result of the modification, the films exhibited free radicals scavenging (DPPH up to 91.47% and ABTS up to 99.21%), as well as antimicrobial (6 log, 4 log, and 2 log reductions for E. coli, S. aureus, and C. albicans, respectively, for samples modified with 1% CUR and 1% CAR) activity. Moreover, antibiofilm activity of modified materials was observed (8.22-87.91% reduction of biofilm, depending on bioactive compounds concentration). PBS films modified with curcumin and carvacrol with observed bifunctional properties have many potential applications as active packaging.

Formulation and Evaluation of Spray-Dried Reconstituted Flaxseed Oil-in-Water Emulsions Based on Flaxseed Oil Cake Extract as Emulsifying and Stabilizing Agent.

Spray drying of emulsions is a promising way of increasing their durability, offering the possibility of reconstitution, with the addition of water. The present study aimed to examine the properties of flaxseed oil cake extract (FOCE) as an emulsifying and stabilizing agent for spray-dried reconstituted oil-in-water emulsions. Maltodextrin: starch: flaxseed oil emulsions with FOCE or distilled water as liquid phases, and 10% and 20% of oil were spray-dried at 180 °C. The solubility, flowability, cohesiveness, bulk, and tapped densities of the spray-dried powders were analyzed. Additionally, the characteristics of initial and reconstituted emulsions, such as stability, creaming index, color, particle size, and rheological properties were evaluated. Results showed that FOCE could be an adequate emulsifier for spray-dried emulsions with a high oil content providing high stability after reconstitution, when compared to emulsions based only on maltodextrin-starch wall material with water as the liquid phase. This study showed an encouraging way for producing natural and plant-based spray-dried oil-loaded emulsions for food applications.

Development and Characterization of Bioactive Polypropylene Films for Food Packaging Applications.

Bioactive polypropylene (PP) films with active agents) presence for food packaging application have been prepared and characterized. The novel modified PP films were obtained via PP/additives systems regranulation and cast extrusion. The influence of two types of plasticizers (natural agents as well as commercial synthetic product) and bioactive additives on final features, e.g., mechanical properties, was evaluated. Moreover, the biocidal activity of the films was determined. Due to their functional properties, they are developed as additives to packaging plastic materials such as polyolefins. The study results presented in our work may indirectly contribute to environmental protection by reducing food waste. The aim of the work was to obtain innovative, functional packaging materials with an ability to prolong the shelf life of food products. The best antimicrobial properties were observed for the sample based on 5 wt.% oregano oil (OO) and 5 wt.% cedar oil (OC) in PP matrix. A microbial test revealed that the system causes total reduction in the following microorganisms: B. subtilis, E. coli, S. aureus, P. putida, C. albicans, A. alternata, F. oxysporum.

The Influence of Flaxseed Oil Cake Extract on Oxidative Stability of Microencapsulated Flaxseed Oil in Spray-Dried Powders.

The objective of the study was to investigate the application of flaxseed oil cake extract (FOCE) for oxidative stabilization of flaxseed oil in spray-dried emulsions. Two variants of powders with 10% and 20% of flaxseed oil (FO), FOCE, and wall material (maltodextrin and starch Capsul®) were produced by spray-drying process at 180 °C. The oxidative stability of FO was monitored during four weeks of storage at 4 °C by peroxide value (PV) and thiobarbituric acid-reactive substances (TBARS) measurements. Additionally, the fatty acids content (especially changes in α-linolenic acid content), radical scavenging activity, total polyphenolics content, color changes and free amino acids content were evaluated. Obtained results indicated that FOCE could be an adequate antioxidant dedicated for spray-dried emulsions, especially with a high content of FO (20%). These results have important implications for the flaxseed oil encapsulation with natural antioxidant agents obtained from plant-based agro-industrial by product, meeting the goals of circular economy and the idea of zero waste.

The Application of Spray-Dried and Reconstituted Flaxseed Oil Cake Extract as Encapsulating Material and Carrier for Probiotic Lacticaseibacillus rhamnosus GG.

Agro-industrial by-products are promising source of biopolymers, including proteins and polysaccharides. This study was designed to evaluate the flaxseed oil cake extract (FOCE) as natural encapsulating material and carrier for probiotic Lacticaseibacillus rhamnous GG (LGG). The powders were obtained using three spray drying inlet temperatures (110 °C, 140 °C, 170 °C), and reconstituted. The influence of temperature on water activity, morphology, chemical composition, flowability and cohesiveness of the powders was estimated. For all variants, the survival of bacteria during spray drying, and simulated passage through the gastrointestinal tract was evaluated. The preservation of LGG probiotic features such as cholesterol reduction, hydrophobicity and adhesion to mucin were examined. Results revealed that all physicochemical and functional characteristics of the powders were affected by the inlet temperature. This study demonstrated that FOCE is an appropriate matrix for spray drying (due to flaxseed proteins and polysaccharides) providing high survivability of bacteria (89.41-96.32%), that passed meaningfully through the simulated gastrointestinal tract (4.39-5.97 log reduction), largely maintaining their probiotic properties, being a promising environmentally-friendly carrier for probiotic LGG.

Characterization of Flaxseed Oil Bimodal Emulsions Prepared with Flaxseed Oil Cake Extract Applied as a Natural Emulsifying Agent.

Currently, a majority of oilseeds plants are converted into byproducts and waste materials during processing. Press cakes are rich in valuable biopolymers, such as proteins and polysaccharides (fiber, lignans, etc.). In this study flaxseed oil cake extract (FOCE) was used to stabilize flaxseed oil-in-water emulsions. The effect of FOCE with various flaxseed oil concentrations (10-50% v/v) on several physicochemical properties of emulsions, such as stability, rheology, color and particle size was investigated. The rheological parameters suggested that all samples were non-Newtonian fluids, whereas particle size measurements and calculation SPAN index provided information about the broadness of emulsions particle size distribution. FOCE was able to efficiently stabilize oil/water interfaces with a high oil content. Results obtained for FOCE were compared with effects for synthetic emulsifier (Tween 80) and separated FOCE compounds (flaxseed gum and flaxseed protein). FOCE emulsifying activity is a result of different water-holding and oil-binding capacities of flaxseed gum and protein. This result is an intriguing conclusion regarding the necessity for using pure emulsifiers, showing the possibility of using a bio-based extract containing biopolymers, which is part of the principles of circular economy and the idea of zero-waste. The results give the opportunity to use FOCE as an ingredient in efficient flaxseed oil emulsions stabilizer for food applications.

The Use of Sage Oil Macerates (Salvia officinalis L.) for Oxidative Stabilization of Cod Liver Oil in Bulk Oil Systems.

The aim of the study was to investigate the antioxidant properties of sage oil macerates (M) in cod liver oil (CLO) during process oxidation catalyzed by UV radiation. CLO was not only subject to oxidative stabilization but also used as a solvent for active ingredients of sage. Macerates were obtained by combining the sage with CLO, homogenization, maceration, and filtration. The effect of different maceration times (0, 3, 6, 8, 10, 13, and 15 days) and different concentrations of macerate addition (5%, 10%, 25%, and 50%) on the CLO oxidation degree, which was determined by peroxide value (PV), anisidine value (AV), and Totox index, was evaluated. Additionally, the total content of polyphenols in macerates by the Folin-Ciocalteu method, antioxidant activity DPPH, and color was determined. The macerates showed antioxidant properties in CLO. The best effect was shown by the initial macerate (maceration time 0, M0), which in 25% concentration significantly inhibited oxidative processes in CLO. It was also characterized by high content of polyphenols and antioxidant activity of DPPH. Sage macerates can effectively inhibit oxidation of fish oils and prolong their durability.

Valorization of Flaxseed Oil Cake Residual from Cold-Press Oil Production as a Material for Preparation of Spray-Dried Functional Powders for Food Applications as Emulsion Stabilizers.

Flaxseed oil cake extract (residual from cold-press oil production and rich in proteins and polysaccharides) was evaluated as a potential substrate for the preparation of spray-dried powders with emulsifying activity. Three variants of powders were obtained using different spray-drying process inlet temperatures: 160 °C, 180 °C, and 200 °C. The influence of temperature on physicochemical features (water holding capacity, oil binding capacity, water activity, solubility, color, chemical composition, antioxidant activity, and surface morphology) of the powders was estimated. Additionally, the emulsifying activity of the powders and the stability of oil-in-water emulsions prepared with their various content (0.5%, 1%, and 3%) were determined. Results showed that inlet temperature had significant influence on all physicochemical and functional properties of the powders. Increased inlet temperature decreased solubility and antioxidant activity but increased water-holding capacity, oil-binding capacity, and emulsifying activity. The emulsions prepared with the powder obtained at 200 °C showed the highest stability. SEM images showed the production of relatively spherical particles which were folded or wrinkled with a lot of dentures. This study could open a promising pathway for producing natural and plant-based spray-dried powders for food applications as emulsion stabilizers.

Biotransformation of Flaxseed Oil Cake into Bioactive Camembert-Analogue Using Lactic Acid Bacteria, Penicillium camemberti and Geotrichum candidum.

This study aimed at investigating the antioxidant activity, oxidative stability, physicochemical and microbial changes of innovative vegan Camembert-analogue based on flaxseed oil cake (FOC) which was produced using lactic acid bacteria (LAB), mold Penicillium camemberti (PC) and yeast Geotrichum candidum (GC). Two variants were prepared, namely with LAB + PC and LAB + PC + GC. After fermentation for 24 h at room temperature, the samples were stored for 14 days at 12 °C and maturated for 14 days at 6 °C. Changes in microbial population, polyphenolics, flavonoids, radical scavenging capacity were evaluated. Additionally, textural changes, pH, acidity, levels of proteins, free amino acids, reducing sugars, oil content and its oxidative stability were determined. Results showed that LAB as well as fungi were capable of growing well in the FOC without any supplementation and the products were characterized by a high antioxidant potential (high polyphenolics and flavonoids contents as well as 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), superoxide (O2-) and hydroxyl (·OH) radicals scavenging activity). This study has demonstrated that bioactivity as well as the physicochemical properties depend on the starter culture used. Due to functional and biochemical characteristics conferred to the obtained Camembert-analogues, the use of P. camemberti and G. candidum showed a potential for industrial application. There is a potential for these products to be used where non-dairy alternatives are desired.

Whey Protein Concentrate/Isolate Biofunctional Films Modified with Melanin from Watermelon (Citrullus lanatus) Seeds.

Valorization of food industry waste and plant residues represents an attractive path towards obtaining biodegradable materials and achieving "zero waste" goals. Here, melanin was isolated from watermelon (Citrullus lanatus) seeds and used as a modifier for whey protein concentrate and isolate films (WPC and WPI) at two concentrations (0.1% and 0.5%). The modification with melanin enhanced the ultraviolet (UV) blocking, water vapor barrier, swelling, and mechanical properties of the WPC/WPI films, in addition to affecting the apparent color. The modified WPC/WPI films also exhibited high antioxidant activity, but no cytotoxicity. Overall, the effects were melanin concentration-dependent. Thus, melanin from watermelon seeds can be used as a functional modifier to develop bioactive biopolymer films with good potential to be exploited in food packaging and biomedical applications.