Profiling N-linked oligosaccharides from IgG by high-performance anion-exchange chromatography with pulsed amperometric detection.

Understanding and characterizing protein therapeutic glycosylation is important with growing evidence that glycosylation impacts biological efficacy, pharmacokinetics and cellular toxicity. Protein expression systems and reactor conditions can impact glycosylation, leading to potentially undesirable glycosylation. For example, high-mannose species may be present, which are atypical of human antibody glycosylation. Their presence in the Fc domain has been linked to increased serum clearance of immunoglobulin G (IgG) antibodies. High-performance anion-exchange chromatography with pulsed amperometric detection (HPAE-PAD) is an effective tool for determining glycans present in glycoprotein therapeutics. We report an improved HPAE-PAD method for IgG oligosaccharide separation. The neutral glycans are well resolved, including separation of high-mannose species from typical human IgG glycans. Oligosaccharide identification was performed by comparison to known standards in conjunction with selective exoglycosidase digestion of both standards and released glycans. Retention times (RTs) of known glycans were compared with the retention times of maltose, maltotriose and maltotetraose standards to define a retention index value for each glycan. These retention indices were used to aid identification of glycans from an example monoclonal antibody sample of unknown glycosylation. Method ruggedness was evaluated across duplicate systems, analysts and triplicate column lots. Comparing two systems with different analysts and columns, retention time precision relative standard deviations (RSDs) were between 0.63 and 4.0% while retention indices precision RSDs ranged from 0.27 to 0.56%. The separation is orthogonal to capillary electrophoresis-based separation of labeled IgG oligosaccharides.

Interlaboratory study on differential analysis of protein glycosylation by mass spectrometry: the ABRF glycoprotein research multi-institutional study 2012.

One of the principal goals of glycoprotein research is to correlate glycan structure and function. Such correlation is necessary in order for one to understand the mechanisms whereby glycoprotein structure elaborates the functions of myriad proteins. The accurate comparison of glycoforms and quantification of glycosites are essential steps in this direction. Mass spectrometry has emerged as a powerful analytical technique in the field of glycoprotein characterization. Its sensitivity, high dynamic range, and mass accuracy provide both quantitative and sequence/structural information. As part of the 2012 ABRF Glycoprotein Research Group study, we explored the use of mass spectrometry and ancillary methodologies to characterize the glycoforms of two sources of human prostate specific antigen (PSA). PSA is used as a tumor marker for prostate cancer, with increasing blood levels used to distinguish between normal and cancer states. The glycans on PSA are believed to be biantennary N-linked, and it has been observed that prostate cancer tissues and cell lines contain more antennae than their benign counterparts. Thus, the ability to quantify differences in glycosylation associated with cancer has the potential to positively impact the use of PSA as a biomarker. We studied standard peptide-based proteomics/glycomics methodologies, including LC-MS/MS for peptide/glycopeptide sequencing and label-free approaches for differential quantification. We performed an interlaboratory study to determine the ability of different laboratories to correctly characterize the differences between glycoforms from two different sources using mass spectrometry methods. We used clustering analysis and ancillary statistical data treatment on the data sets submitted by participating laboratories to obtain a consensus of the glycoforms and abundances. The results demonstrate the relative strengths and weaknesses of top-down glycoproteomics, bottom-up glycoproteomics, and glycomics methods.

Evaluation of desialylation during 2-amino benzamide labeling of asparagine-linked oligosaccharides.

Labeling of released asparagine-linked (N-linked) oligosaccharides from glycoproteins is commonly performed to aid in the separation and detection of the oligosaccharide. Of the many available oligosaccharide labels, 2-amino benzamide (2-AB) is a popular choice for providing a fluorescent product. The derivatization conditions can potentially lead to oligosaccharide desialylation. This work evaluated the extent of sialic acid loss during 2-AB labeling of N-linked oligosaccharides released from bovine fetuin, polyclonal human serum immunoglobulin G (IgG), and human α1-acid glycoprotein (AGP) as well as of sialylated oligosaccharide reference standards and found that for more highly sialylated oligosaccharides the loss is greater than the <2% value commonly cited. Manufacturers of glycoprotein biotherapeutics need to produce products with a consistent state of sialylation and, therefore, require an accurate assessment of glycoprotein sialylation.

Spectroscopic and density functional theory studies of the blue-copper site in M121SeM and C112SeC azurin: Cu-Se versus Cu-S bonding.

S K-edge X-ray absorption, UV-vis absorption, magnetic circular dichroism (MCD), and resonance Raman spectroscopies are used to investigate the electronic structure differences among WT, M121SeM, and C112SeC Pseudomonas aeruginosa (P.a) azurin. A comparison of S K-edge XAS of WT and M121SeM azurin and a CuII-thioether model complex shows that the 38% S character in the ground state wave function of the blue-copper (BC) sites solely reflects the Cu-SCys bond. Resonance Raman (rR) data on WT and C112SeC azurin give direct evidence for the kinematic coupling between the Cu-SCys stretch and the cysteine deformation modes in WT azurin, which leads to multiple features in the rR spectrum of the BC site. The UV-vis absorption and MCD data on WT, M121SeM, and C112SeC give very similar C0/D0 ratios, indicating that the C-term MCD intensity mechanism involves Cu-centered spin-orbit coupling (SOC). The spectroscopic data combined with density functional theory (DFT) calculations indicate that SCys and SeCys have similar covalent interactions with Cu at their respective bond lengths of 2.1 and 2.3 A. This reflects the similar electronegativites of S and Se in the thiolate/selenolate ligand fragment and explains the strong spectroscopic similarities between WT and C112SeC azurin.

Modernizing the assay for ammonia in pharmaceuticals.

The United States Pharmacopeia USP35-NF30 contains monographs for adenosine and sodium bicarbonate with imprecise and outdated color comparison assays for ammonia. In the spirit of monograph modernization we developed ion chromatography (IC) assays for ammonia that meet the requirements of the adenosine and sodium bicarbonate monographs. Ammonia, as ammonium, in a solution of adenosine is separated on a high-performance cation-exchange column and detected by suppressed conductivity. This assay requires <5min per sample and accurately determines the ammonia content of adenosine. For sodium bicarbonate a different IC method was required to determine ammonia due to the high concentration of sodium relative to ammonia in a sodium bicarbonate solution. This assay uses a high-capacity cation-exchange column that has the appropriate selectivity for determining low concentrations of ammonia in the presence of high concentrations of sodium. For both the methods, the precisions (retention time RSD<0.1%, peak area RSD<2.3%), accuracy (average recovery 70-117), limits of detection (LOD) and quantitation (LOQ), and robustness were measured according to the analytical performance requirements described in USP General Chapter <1225>.

The fate of free radicals in a cellulose based hydrogel: detection by electron paramagnetic resonance spectroscopy.

Cellulose derivatives are commonly used as gelling agents in topical and ophthalmic drug formulations. During the course of manufacturing, cellulose derivatives are believed to generate free radicals. These free radicals may degrade the gelling agent, leading to lower viscosity. Free radicals also may react with the active ingredient in the product. The formation of radicals in a 3% hydrogel of hypromellose (hydroxypropyl methylcellulose) was monitored by electron paramagnetic resonance (EPR) spectroscopy and spin trapping techniques. Radicals were trapped with 5,5-dimethyl-1-pyrroline-N-oxide (DMPO) and quantitated by comparing the EPR intensity with 4-hydroxy-2,2,6,6-tetramethylpiperidinyloxy (TEMPOL), a stable free radical. Typically, the hydrogels showed an initial increase in the radical concentration within 2 days after autoclaving, followed by a drop in radical concentration in 7 days. EDTA prevented the formation of free radicals in the hypromellose (HPMC) hydrogel, suggesting the involvement of metal ions in the generation of free radicals. The oxidizing potential of the hydrogel was estimated by measuring the rate at which methionine (a model for the protein active pharmaceutical ingredient) was degraded, and was consistent with the amount of radicals present in the gel. This study is the first report investigating the application of EPR spectroscopy in detecting and estimating free radical concentration in cellulose based hydrogels.

Spectroscopic and DFT investigation of [M{HB(3,5-iPr2pz)3}(SC6F5)] (M = Mn, Fe, Co, Ni, Cu, and Zn) model complexes: periodic trends in metal-thiolate bonding.

A series of metal-varied [ML(SC6F5)] model complexes (where L = hydrotris(3,5-diisopropyl-1-pyrazolyl)borate and M = Mn, Fe, Co, Ni, Cu, and Zn) related to blue copper proteins has been studied by a combination of absorption, MCD, resonance Raman, and S K-edge X-ray absorption spectroscopies. Density functional calculations have been used to characterize these complexes and calculate their spectra. The observed variations in geometry, spectra, and bond energies are interpreted in terms of changes in the nature of metal-ligand bonding interactions. The metal 3d-ligand orbital interaction, which contributes to covalent bonding in these complexes, becomes stronger going from Mn(II) to Co(II) (the sigma contribution) and to Cu(II) (the pi contribution). This change in the covalency results from the increased effective nuclear charge of the metal atom in going from Mn(II) to Zn(II) and the change in the 3d orbital populations (d5-->d10). Ionic bonding also plays an important role in determining the overall strength of the ML(+)-SC6F5(-) interaction. However, there is a compensating effect: as the covalent contribution to the metal-ligand bonding increases, the ionic contribution decreases. These results provide insight into the Irving-Williams series, where it is found that the bonding of the ligand being replaced by the thiolate makes a major contribution to the observed order of the stability constants over the series of metal ions.

Spectroscopic and density functional studies of the red copper site in nitrosocyanin: role of the protein in determining active site geometric and electronic structure.

The electronic structure of the red copper site in nitrosocyanin is defined relative to that of the well understood blue copper site of plastocyanin by using low-temperature absorption, circular dichroism, magnetic circular dichroism, resonance Raman, EPR and X-ray absorption spectroscopies, combined with DFT calculations. These studies indicate that the principal electronic structure change in the red copper site is the sigma rather than the pi donor interaction of the cysteine sulfur with the Cu 3d(x2-y2) redox active molecular orbital (RAMO). Further, MCD data show that there is an increase in ligand field strength due to an increase in coordination number, whereas resonance Raman spectra indicate a weaker Cu-S bond. The latter is supported by the S K-edge data, which demonstrate a less covalent thiolate interaction with the RAMO of nitrosocyanin at 20% relative to plastocyanin at 38%. EXAFS results give a longer Cu-S(Cys) bond distance in nitrosocyanin (2.28 A) compared to plastocyanin (2.08 A) and also show a large change in structure with reduction of the red copper site. The red copper site is the only presently known blue copper-related site with an exogenous water coordinated to the copper. Density functional calculations reproduce the experimental properties and are used to determine the specific protein structure contributions to exogenous ligand binding in red copper. The relative orientation of the CuNNS and the CuSC(beta) planes (determined by the protein sequence) is found to be key in generating an exchangeable coordination position at the red copper active site. The exogenous water ligation at the red copper active site greatly increases the reorganization energy (by approximately 1.0 eV) relative to that of the blue copper protein site, making the red site unfavorable for fast outer-sphere electron transfer, while providing an exchangeable coordination position for inner-sphere electron transfer.

Spectroscopic studies of the Met182Thr mutant of nitrite reductase: role of the axial ligand in the geometric and electronic structure of blue and green copper sites.

A combination of spectroscopic methods and density functional calculations has been used to describe the electronic structure of the axial mutant (Met182Thr) of Rhodobacter sphaeroides nitrite reductase in which the axial methionine has been changed to a threonine. This mutation results in a dramatic change in the geometric and electronic structure of the copper site. The electronic absorption data imply that the type 1 site in the mutant is like a typical blue copper site in contrast to the wild-type site, which is green. Similar ligand field strength in the mutant and the wild type (from MCD spectra) explains the similar EPR parameters for very different electronic structures. Resonance Raman shows that the Cu-S(Cys) bond is stronger in the mutant relative to the wild type. From a combination of absorption, CD, MCD, and EPR data, the loss of the strong axial thioether (present in the wild-type site) results in an increase of the equatorial thiolate-Cu interaction and the site becomes less tetragonal. Spectroscopically calibrated density functional calculations were used to provide additional insight into the role of the axial ligand. The calculations reproduce well the experimental ground-state bonding and the changes in going from a green to a blue site along this coupled distortion coordinate. Geometry optimizations at the weak and strong axial ligand limits show that the bonding of the axial thioether is the key factor in determining the structure of the ground state. A comparison of plastocyanin (blue), wild-type nitrite reductase (green), and the Met182Thr mutant (blue) sites enables evaluation of the role of the axial ligand in the geometric and electronic structure of type 1 copper sites, which can affect the electron-transfer properties of these sites.

Spectroscopic investigation of stellacyanin mutants: axial ligand interactions at the blue copper site.

Detailed electronic and geometric structural descriptions of the blue copper sites in wild-type (WT) stellacyanin and its Q99M and Q99L axial mutants have been obtained using a combination of XAS, resonance Raman, MCD, EPR, and DFT calculations. The results show that the origin of the short Cu-S(Cys) bond in blue copper proteins is the weakened axial interaction, which leads to a shorter (based on EXAFS results) and more covalent (based on S K-edge XAS) Cu-S bond. XAS pre-edge energies show that the effective nuclear charge on the copper increases going from O(Gln) to S(Met) to no axial (Leu) ligand, indicating that the weakened axial ligand is not fully compensated for by the increased donation from the thiolate. This is further supported by EPR results. MCD data show that the decreased axial interaction leads to an increase in the equatorial ligand field, indicating that the site acquires a more trigonally distorted tetrahedral structure. These geometric and electronic structural changes, which result from weakening the bonding interaction of the axial ligand, allow the site to maintain efficient electron transfer (high H(DA) and low reorganization energy), while modulating the redox potential of the site to the biologically relevant range. These spectroscopic studies are complemented by DFT calculations to obtain insight into the factors that allow stellacyanin to maintain a trigonally distorted tetrahedral structure with a relatively strong axial Cu(II)-oxygen bond.