Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 41
Filtrar
1.
Nat Mater ; 23(3): 323-330, 2024 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-38191631

RESUMO

Moiré superlattices formed by twisting trilayers of graphene are a useful model for studying correlated electron behaviour and offer several advantages over their formative bilayer analogues, including a more diverse collection of correlated phases and more robust superconductivity. Spontaneous structural relaxation alters the behaviour of moiré superlattices considerably and has been suggested to play an important role in the relative stability of superconductivity in trilayers. Here we use an interferometric four-dimensional scanning transmission electron microscopy approach to directly probe the local graphene layer alignment over a wide range of trilayer graphene structures. Our results inform a thorough understanding of how reconstruction modulates the local lattice symmetries crucial for establishing correlated phases in twisted graphene trilayers, evincing a relaxed structure that is markedly different from that proposed previously.

2.
Nature ; 558(7710): 425-429, 2018 06.
Artigo em Inglês | MEDLINE | ID: mdl-29925970

RESUMO

Molecular-scale manipulation of electronic and ionic charge accumulation in materials is the backbone of electrochemical energy storage1-4. Layered van der Waals (vdW) crystals are a diverse family of materials into which mobile ions can electrochemically intercalate into the interlamellar gaps of the host atomic lattice5,6. The structural diversity of such materials enables the interfacial properties of composites to be optimized to improve ion intercalation for energy storage and electronic devices7-12. However, the ability of heterolayers to modify intercalation reactions, and their role at the atomic level, are yet to be elucidated. Here we demonstrate the electrointercalation of lithium at the level of individual atomic interfaces of dissimilar vdW layers. Electrochemical devices based on vdW heterostructures 13 of stacked hexagonal boron nitride, graphene and molybdenum dichalcogenide (MoX2; X = S, Se) layers are constructed. We use transmission electron microscopy, in situ magnetoresistance and optical spectroscopy techniques, as well as low-temperature quantum magneto-oscillation measurements and ab initio calculations, to resolve the intermediate stages of lithium intercalation at heterointerfaces. The formation of vdW heterointerfaces between graphene and MoX2 results in a more than tenfold greater accumulation of charge in MoX2 when compared to MoX2/MoX2 homointerfaces, while enforcing a more negative intercalation potential than that of bulk MoX2 by at least 0.5 V. Beyond energy storage, our combined experimental and computational methodology for manipulating and characterizing the electrochemical behaviour of layered systems opens new pathways to control the charge density in two-dimensional electronic and optoelectronic devices.

3.
Nano Lett ; 23(22): 10334-10341, 2023 Nov 22.
Artigo em Inglês | MEDLINE | ID: mdl-37955966

RESUMO

Intercalation reactions modify the charge density in van der Waals (vdW) materials through coupled electronic-ionic charge accumulation and are susceptible to modulation by interlayer hybridization in vdW heterostructures. Here, we demonstrate that charge transfer between graphene and α-RuCl3, which hole-dopes the graphene, greatly favors the intercalation of lithium ions into graphene-based vdW heterostructures. We systematically tune this effect on Li+ ion intercalation, modulating the intercalation potential, by using varying thicknesses of hexagonal boron nitride (hBN) as spacer layers between graphene and α-RuCl3. Confocal Raman spectroscopy and electronic transport measurements are used to monitor electrochemical intercalation, and density functional theory computations help quantify charge transfer to both α-RuCl3 and graphene upon Li intercalation. This work demonstrates a versatile approach for systematically modulating the electrochemical intercalation behavior of two-dimensional layers akin to electron donating/withdrawing substituent effects used to tune molecular redox potentials.

4.
J Am Chem Soc ; 145(36): 20041-20052, 2023 Sep 13.
Artigo em Inglês | MEDLINE | ID: mdl-37646536

RESUMO

Some magnetic systems display a shift in the center of their magnetic hysteresis loop away from zero field, a phenomenon termed exchange bias. Despite the extensive use of the exchange bias effect, particularly in magnetic multilayers, for the design of spin-based memory/electronics devices, a comprehensive mechanistic understanding of this effect remains a longstanding problem. Recent work has shown that disorder-induced spin frustration might play a key role in exchange bias, suggesting new materials design approaches for spin-based electronic devices that harness this effect. Here, we design a spin glass with strong spin frustration induced by magnetic disorder by exploiting the distinctive structure of Fe intercalated ZrSe2, where Fe(II) centers are shown to occupy both octahedral and tetrahedral interstitial sites and to distribute between ZrSe2 layers without long-range structural order. Notably, we observe behavior consistent with a magnetically frustrated and multidegenerate ground state in these Fe0.17ZrSe2 single crystals, which persists above room temperature. Moreover, this magnetic frustration leads to a robust and tunable exchange bias up to 250 K. These results not only offer important insights into the effects of magnetic disorder and frustration in magnetic materials generally, but also highlight as design strategy the idea that a large exchange bias can arise from an inhomogeneous microscopic environment without discernible long-range magnetic order. In addition, these results show that intercalated TMDs like Fe0.17ZrSe2 hold potential for spintronic technologies that can achieve room temperature applications.

5.
Nature ; 609(7925): 38-39, 2022 09.
Artigo em Inglês | MEDLINE | ID: mdl-36045233
6.
Nano Lett ; 22(4): 1726-1733, 2022 Feb 23.
Artigo em Inglês | MEDLINE | ID: mdl-35133170

RESUMO

A rechargeable aluminum-ion battery based on chloroaluminate electrolytes has received intense attention due to the high abundance and chemical stability of aluminum. However, the fundamental intercalation processes and dynamics in these battery systems remain unresolved. Here, the energetics and dynamics of chloroaluminate ion intercalation in atomically thin single crystal graphite are investigated by fabricating mesoscopic devices for charge transport and operando optical microscopy. These mesoscopic measurements are compared to the high-performance rechargeable Al-based battery consisting of a few-layer graphene-multiwall carbon nanotube composite cathode. These composites exhibit a 60% capacity enhancement over pyrolytic graphite, while an ∼3-fold improvement in overall ion diffusivity is also obtained exhibiting ∼1% of those in atomically thin single crystals. Our results thus establish the distinction between intrinsic and ensemble electrochemical behavior in Al-based batteries and show that engineering ion transport in these devices can yet lead to vast improvements in battery performance.

7.
J Am Chem Soc ; 144(22): 9525-9542, 2022 Jun 08.
Artigo em Inglês | MEDLINE | ID: mdl-35584537

RESUMO

Transition metal dichalcogenides (TMDs) intercalated with spin-bearing transition metal centers are a diverse class of magnetic materials where the spin density and ordering behavior can be varied by the choice of host lattice, intercalant identity, level of intercalation, and intercalant disorder. Each of these degrees of freedom alters the interplay between several key magnetic interactions to produce disparate collective electronic and magnetic phases. The array of magnetic and electronic behavior typified by these systems renders them distinctive platforms for realizing tunable magnetism in solid-state materials and promising candidates for spin-based electronic devices. This Perspective provides an overview of the rich magnetism displayed by transition metal-intercalated TMDs by considering Fe- and Cr-intercalated NbS2 and TaS2. These four exemplars of this large family of materials exhibit a wide range of magnetic properties, including sharp switching of magnetic states, current-driven magnetic switching, and chiral spin textures. An understanding of the fundamental origins of the resultant magnetic/electronic phases in these materials is discussed in the context of composition, bonding, electronic structure, and magnetic anisotropy in each case study.

8.
J Am Chem Soc ; 144(27): 12167-12176, 2022 07 13.
Artigo em Inglês | MEDLINE | ID: mdl-35732002

RESUMO

Two-dimensional (2D) magnetic crystals hold promise for miniaturized and ultralow power electronic devices that exploit spin manipulation. In these materials, large, controllable magnetocrystalline anisotropy (MCA) is a prerequisite for the stabilization and manipulation of long-range magnetic order. In known 2D magnetic crystals, relatively weak MCA typically results in soft ferromagnetism. Here, we demonstrate that ferromagnetic order persists down to the thinnest limit of FexTaS2 (Fe-intercalated bilayer 2H-TaS2) with giant coercivities up to 3 T. We prepare Fe-intercalated TaS2 by chemical intercalation of van der Waals-layered 2H-TaS2 crystals and perform variable-temperature transport, transmission electron microscopy, and confocal Raman spectroscopy measurements to shed new light on the coupled effects of dimensionality, degree of intercalation, and intercalant order/disorder on the hard ferromagnetic behavior of FexTaS2. More generally, we show that chemical intercalation gives access to a rich synthetic parameter space for low-dimensional magnets, in which magnetic properties can be tailored by the choice of the host material and intercalant identity/amount, in addition to the manifold distinctive degrees of freedom available in atomically thin, van der Waals crystals.


Assuntos
Imãs , Tantálio , Dissulfetos , Eletrônica , Ferro
9.
Nat Mater ; 20(7): 956-963, 2021 07.
Artigo em Inglês | MEDLINE | ID: mdl-33859383

RESUMO

Van der Waals heteroepitaxy allows deterministic control over lattice mismatch or azimuthal orientation between atomic layers to produce long-wavelength superlattices. The resulting electronic phases depend critically on the superlattice periodicity and localized structural deformations that introduce disorder and strain. In this study we used Bragg interferometry to capture atomic displacement fields in twisted bilayer graphene with twist angles <2°. Nanoscale spatial fluctuations in twist angle and uniaxial heterostrain were statistically evaluated, revealing the prevalence of short-range disorder in moiré heterostructures. By quantitatively mapping strain tensor fields, we uncovered two regimes of structural relaxation and disentangled the electronic contributions of constituent rotation modes. Further, we found that applied heterostrain accumulates anisotropically in saddle-point regions, generating distinctive striped strain phases. Our results establish the reconstruction mechanics underpinning the twist-angle-dependent electronic behaviour of twisted bilayer graphene and provide a framework for directly visualizing structural relaxation, disorder and strain in moiré materials.

11.
Proc Natl Acad Sci U S A ; 114(7): 1486-1491, 2017 02 14.
Artigo em Inglês | MEDLINE | ID: mdl-28137835

RESUMO

Iron doping of nickel oxide films results in enhanced activity for promoting the oxygen evolution reaction (OER). Whereas this enhanced activity has been ascribed to a unique iron site within the nickel oxide matrix, we show here that Fe doping influences the Ni valency. The percent of Fe3+ doping promotes the formation of formal Ni4+, which in turn directly correlates with an enhanced activity of the catalyst in promoting OER. The role of Fe3+ is consistent with its behavior as a superior Lewis acid.

12.
Nano Lett ; 18(1): 460-466, 2018 01 10.
Artigo em Inglês | MEDLINE | ID: mdl-29268017

RESUMO

Electrochemical intercalation is a powerful method for tuning the electronic properties of layered solids. In this work, we report an electrochemical strategy to controllably intercalate lithium ions into a series of van der Waals (vdW) heterostructures built by sandwiching graphene between hexagonal boron nitride (h-BN). We demonstrate that encapsulating graphene with h-BN eliminates parasitic surface side reactions while simultaneously creating a new heterointerface that permits intercalation between the atomically thin layers. To monitor the electrochemical process, we employ the Hall effect to precisely monitor the intercalation reaction. We also simultaneously probe the spectroscopic and electrical transport properties of the resulting intercalation compounds at different stages of intercalation. We achieve the highest carrier density >5 × 1013 cm2 with mobility >103 cm2/(V s) in the most heavily intercalated samples, where Shubnikov-de Haas quantum oscillations are observed at low temperatures. These results set the stage for further studies that employ intercalation in modifying properties of vdW heterostructures.

13.
Proc Natl Acad Sci U S A ; 112(17): 5309-13, 2015 Apr 28.
Artigo em Inglês | MEDLINE | ID: mdl-25870280

RESUMO

A patterning method termed "RIPPLE" (reactive interface patterning promoted by lithographic electrochemistry) is applied to the fabrication of arrays of dielectric and metallic optical elements. This method uses cyclic voltammetry to impart patterns onto the working electrode of a standard three-electrode electrochemical setup. Using this technique and a template stripping process, periodic arrays of Ag circular Bragg gratings are patterned in a high-throughput fashion over large substrate areas. By varying the scan rate of the cyclically applied voltage ramps, the periodicity of the gratings can be tuned in situ over micrometer and submicrometer length scales. Characterization of the periodic arrays of periodic gratings identified point-like and annular scattering modes at different planes above the structured surface. Facile, reliable, and rapid patterning techniques like RIPPLE may enable the high-throughput and low-cost fabrication of photonic elements and metasurfaces for energy conversion and sensing applications.

14.
Proc Natl Acad Sci U S A ; 112(8): 2337-42, 2015 Feb 24.
Artigo em Inglês | MEDLINE | ID: mdl-25675518

RESUMO

Photovoltaic cells have considerable potential to satisfy future renewable-energy needs, but efficient and scalable methods of storing the intermittent electricity they produce are required for the large-scale implementation of solar energy. Current solar-to-fuels storage cycles based on water splitting produce hydrogen and oxygen, which are attractive fuels in principle but confront practical limitations from the current energy infrastructure that is based on liquid fuels. In this work, we report the development of a scalable, integrated bioelectrochemical system in which the bacterium Ralstonia eutropha is used to efficiently convert CO2, along with H2 and O2 produced from water splitting, into biomass and fusel alcohols. Water-splitting catalysis was performed using catalysts that are made of earth-abundant metals and enable low overpotential water splitting. In this integrated setup, equivalent solar-to-biomass yields of up to 3.2% of the thermodynamic maximum exceed that of most terrestrial plants. Moreover, engineering of R. eutropha enabled production of the fusel alcohol isopropanol at up to 216 mg/L, the highest bioelectrochemical fuel yield yet reported by >300%. This work demonstrates that catalysts of biotic and abiotic origin can be interfaced to achieve challenging chemical energy-to-fuels transformations.


Assuntos
Fontes de Energia Bioelétrica/microbiologia , Biocombustíveis/microbiologia , Cupriavidus necator/fisiologia , Energia Solar , Água , Álcoois , Reatores Biológicos/microbiologia , Catalase/farmacologia , Catálise , Cupriavidus necator/citologia , Cupriavidus necator/efeitos dos fármacos , Cupriavidus necator/crescimento & desenvolvimento , Eletrodos , Engenharia Genética , Viabilidade Microbiana/efeitos dos fármacos , Espécies Reativas de Oxigênio/metabolismo
17.
Proc Natl Acad Sci U S A ; 111(42): 15001-6, 2014 Oct 21.
Artigo em Inglês | MEDLINE | ID: mdl-25298534

RESUMO

The hangman motif provides mechanistic insights into the role of pendant proton relays in governing proton-coupled electron transfer (PCET) involved in the hydrogen evolution reaction (HER). We now show improved HER activity of Ni compared with Co hangman porphyrins. Cyclic voltammogram data and simulations, together with computational studies using density functional theory, implicate a shift in electrokinetic zone between Co and Ni hangman porphyrins due to a change in the PCET mechanism. Unlike the Co hangman porphyrin, the Ni hangman porphyrin does not require reduction to the formally metal(0) species before protonation by weak acids in acetonitrile. We conclude that protonation likely occurs at the Ni(I) state followed by reduction, in a stepwise proton transfer-electron transfer pathway. Spectroelectrochemical and computational studies reveal that upon reduction of the Ni(II) compound, the first electron is transferred to a metal-based orbital, whereas the second electron is transferred to a molecular orbital on the porphyrin ring.

18.
Top Curr Chem ; 371: 173-213, 2016.
Artigo em Inglês | MEDLINE | ID: mdl-26245626

RESUMO

The contemporary demand to generate fuels from solar energy has stimulated intense effort to develop water splitting catalysts that can be coupled to light-absorbing materials. Cobalt oxido catalyst (Co-OECs) films deposited from buffered Co(II) solutions have emerged as arguably the most studied class of heterogeneous oxygen evolution catalysts. The interest in these materials stems from their formation by self-assembly, their self-healing properties, and their promising catalytic activity under a variety of conditions. The structure and function of these catalysts are reviewed here together with studies of molecular Co-O cluster compounds, which have proven invaluable in elucidating the chemistry of the Co-OECs.

19.
J Am Chem Soc ; 137(11): 3739-42, 2015 Mar 25.
Artigo em Inglês | MEDLINE | ID: mdl-25741869

RESUMO

The development of high-throughput and scalable techniques for patterning inorganic structures is useful for the improved function and efficiency of photonic and energy conversion devices. Here we demonstrate a facile and rapid electrochemical method for patterning periodic metallic and nonmetallic submicron structures over large areas. Si substrates have been patterned with arrays of periodically spaced lines, rings, squares, and terraces of main-group and transition-metal oxides. In addition to planar substrates, three-dimensional surfaces and their vertical sidewalls have been patterned. The features are 20(±1) nm high and 360(±15) nm wide, and their period is finely tunable in situ from 500 nm to 7 µm. These features exhibit <3% variation in period and are rapidly patterned in <2 min. We demonstrate the versatility of the technique by rapidly patterning an efficient water splitting catalyst, Co phosphate oxide (CoPi), and show that the integrated materials system performs water splitting with complete Faradaic efficiency. More generally, the ability to pattern submicron structures over large areas in a facile, reliable, and timely manner may be useful for the fabrication of devices for energy, meta-material, and sensing applications.

20.
Proc Natl Acad Sci U S A ; 109(39): 15617-21, 2012 Sep 25.
Artigo em Inglês | MEDLINE | ID: mdl-22689962

RESUMO

An artificial leaf can perform direct solar-to-fuels conversion. The construction of an efficient artificial leaf or other photovoltaic (PV)-photoelectrochemical device requires that the power curve of the PV material and load curve of water splitting, composed of the catalyst Tafel behavior and cell resistances, be well-matched near the thermodynamic potential for water splitting. For such a condition, we show here that the current density-voltage characteristic of the catalyst is a key determinant of the solar-to-fuels efficiency (SFE). Oxidic Co and Ni borate (Co-B(i) and Ni-B(i)) thin films electrodeposited from solution yield oxygen-evolving catalysts with Tafel slopes of 52 mV/decade and 30 mV/decade, respectively. The consequence of the disparate Tafel behavior on the SFE is modeled using the idealized behavior of a triple-junction Si PV cell. For PV cells exhibiting similar solar power-conversion efficiencies, those displaying low open circuit voltages are better matched to catalysts with low Tafel slopes and high exchange current densities. In contrast, PV cells possessing high open circuit voltages are largely insensitive to the catalyst's current density-voltage characteristics but sacrifice overall SFE because of less efficient utilization of the solar spectrum. The analysis presented herein highlights the importance of matching the electrochemical load of water-splitting to the onset of maximum current of the PV component, drawing a clear link between the kinetic profile of the water-splitting catalyst and the SFE efficiency of devices such as the artificial leaf.


Assuntos
Materiais Biomiméticos/química , Modelos Químicos , Oxigênio/química , Folhas de Planta , Energia Solar , Boratos/química , Catálise , Cobalto/química , Cinética , Níquel/química
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA