RESUMO
INTRODUCTION: Previous bone density studies have generally shown bone resorption around both cemented and uncemented total hip arthroplasty (THA) stems. This is presumed to be due to stress shielding. Short stems have been introduced partly to preserve bone in the proximal femur by a more physiological loading of the bone. The purpose of this study was to evaluate bone remodeling around a short, fully hydroxyapatite-coated titanium stem that comes in a collared and collarless version. PATIENTS AND METHODS: A prospective cohort of 50 patients included in a study evaluating the Furlong Evolution stem has been followed for 5 years. Examination was done with dual energy X-ray absorptiometry (DXA) postoperatively, at 1, 2 and 5 years. Clinical outcome was followed with radiography and both general and hip specific outcome measures. RESULTS: The two versions of the stem behaved similarly regarding bone remodeling. After an initial decrease up to 1 year, bone mineral density (BMD) increased in all Gruen zones up to 2 years and at 5 years bone stock was still preserved compared with postoperatively (net BMD + 1.2% (95% CI - 0.4 to 2.8)). Increase in BMD occurred mainly in the greater trochanter and distally around the stem with a decrease in the calcar area. Both versions showed excellent clinical outcome up to 5 years. CONCLUSION: This short stem seems to preserve proximal bone stock up to 5 years, exhibiting similar behaviour both with and without a collar. TRIAL REGISTRATION NUMBER AND DATE OF REGISTRATION: ClinicalTrials.gov, (identifier: NCT01894854). July 10, 2013.
Assuntos
Artroplastia de Quadril , Prótese de Quadril , Absorciometria de Fóton , Artroplastia de Quadril/efeitos adversos , Densidade Óssea/fisiologia , Remodelação Óssea/fisiologia , Durapatita , Fêmur/cirurgia , Seguimentos , Prótese de Quadril/efeitos adversos , Humanos , Estudos Prospectivos , Desenho de Prótese , TitânioRESUMO
Background and purpose - Impaction bone grafting (IBG) in revision hip surgery is an established method in restoring bone stock deficiencies. We hypothesized that local treatment of the morsellized allograft with a bisphosphonate in cemented revision would, in addition to increased bone density, also reduce the early migration of the cup as measured by radiostereometry (RSA). Patients and methods - 20 patients with aseptic cup loosening underwent revision using the IBG technique. The patients were randomized to either clodronate (10 patients) or saline (10 patients, control group) as local adjunct to the morsellized bone. The outcome was evaluated by dual-energy X-ray absorptiometry (DXA) during the first year regarding periacetabular bone density and with radiostereometric analysis (RSA) for the first 2 years regarding cup migration. Results - 2 patients were lost to follow-up: 9 patients remained in the clodronate and 9 in the control group. Less proximal migration was found in the clodronate group compared with the controls, measured both over time (mixed-models analysis, p = 0.02) as well as at the specified time points up to 2 years (0.22 mm and 0.59 mm respectively, p = 0.02). Both groups seemed to have stabilized at 1 year. We found similar bone mineral density measured by DXA, and similar RSA migration in the other directions. No cups were re-revised. Interpretation - Local treatment of the allograft bone with clodronate reduced early proximal migration of the revised cup but without any measurable difference in periacetabular bone density.
Assuntos
Conservadores da Densidade Óssea/uso terapêutico , Transplante Ósseo/métodos , Difosfonatos/uso terapêutico , Prótese de Quadril , Falha de Prótese , Reoperação/métodos , Absorciometria de Fóton , Idoso , Idoso de 80 Anos ou mais , Densidade Óssea/efeitos dos fármacos , Conservadores da Densidade Óssea/administração & dosagem , Difosfonatos/administração & dosagem , Feminino , Prótese de Quadril/efeitos adversos , Humanos , Articulação do Joelho/diagnóstico por imagem , Articulação do Joelho/cirurgia , Masculino , Pessoa de Meia-Idade , Falha de Prótese/efeitos dos fármacos , Análise RadioestereométricaRESUMO
BACKGROUND: Bone grafts are frequently used in orthopaedic surgery. Graft remodelling is advantageous but can occur too quickly, and premature bone resorption might lead to decreased mechanical integrity of the graft. Bisphosphonates delay osteoclastic bone resorption but may also impair formation of new bone. We hypothesize that these effects are dose dependent. In the present study we evaluate different ways of applying bisphosphonates locally to the graft in a bone chamber model, and compare that with systemic treatment. METHODS: Cancellous bone grafts were placed in titanium chambers and implanted in the tibia of 50 male rats, randomly divided into five groups. The first group served as negative control and the grafts were rinsed in saline before implantation. In the second and third groups, the grafts were soaked in a zoledronic acid solution (0.5 mg/ml) for 5 seconds and 10 minutes respectively before being rinsed in saline. In the fourth group, 8 µL of zoledronic acid solution (0.5 mg/ml) was pipetted onto the freeze-dried grafts without rinsing. The fifth group served as positive control and the rats were given zoledronic acid (0.1 mg/kg) systemically as a single injection two weeks after surgery. The grafts were harvested at 6 weeks and analysed with histomorphometry, evaluating the ingrowth distance of new bone into the graft as an equivalent to the anabolic osteoblast effect and the amount (bone volume/total volume; BV/TV) of remaining bone in the remodelled graft as equivalent to the catabolic osteoclast effect. RESULTS: In all chambers, almost the entire graft had been revascularized but only partly remodelled at harvest. The ingrowth distance of new bone into the graft was lower in grafts soaked in zoledronic acid for 10 minutes compared to control (p = 0.007). In all groups receiving zoledronic acid, the BV/TV was higher compared to control. CONCLUSIONS: This study found a strong inhibitory effect on bone resorption by bisphosphonates but also a limited inhibition of the ingrowth of new bone. Local treatment at surgery resulted in stronger inhibition of both resorption and bone formation compared to systemic treatment.
Assuntos
Conservadores da Densidade Óssea/administração & dosagem , Reabsorção Óssea/prevenção & controle , Difosfonatos/administração & dosagem , Imidazóis/administração & dosagem , Osteogênese/efeitos dos fármacos , Animais , Reabsorção Óssea/patologia , Cultura em Câmaras de Difusão , Feminino , Masculino , Osteogênese/fisiologia , Distribuição Aleatória , Ratos , Tíbia/efeitos dos fármacos , Tíbia/fisiologia , Tíbia/cirurgia , Titânio/administração & dosagem , Transplante Homólogo/métodos , Resultado do Tratamento , Ácido ZoledrônicoRESUMO
BACKGROUND AND PURPOSE: The remodeling of morselized bone grafts in revision surgery can be enhanced by an anabolic substance such as a bone morphogenetic protein (BMP). On the other hand, BMPs boost catabolism and might cause a premature resorption, both of the graft and of the new-formed bone. Bisphosphonates inactivate osteoclasts and can be used to control the resorption. We studied a combination of both drugs as a local admix to a cancellous allograft. METHODS: Cancellous bone allografts were harvested and freeze-dried. Either saline, BMP-7, the bisphosphonate zoledronate, or a combination of BMP-7 and zoledronate were added in solution. The grafts were placed in bone conduction chambers and implanted in the proximal tibia of 34 rats. The grafts were harvested after 6 weeks and evaluated by histomorphometry. RESULTS: Bone volume/total volume (BV/TV) was 50% in the grafts treated with the combination of BMP-7 and zoledronate and 16% in the saline controls (p < 0.001). In the zoledronate group BV/TV was 56%, and in the BMP group it was 14%. The ingrowth distance of new bone into the graft was 3.5 mm for the combination of BMP-7 and zoledronate and 2.6 mm in the saline control (p = 0.002). The net amount of retained remodeled bone was more than 4 times higher when BMP-7 and zoledronate were combined than in the controls. INTERPRETATION: An anabolic drug like BMP-7 can be combined with an anti-catabolic bisphosphonate as local bone graft adjunct, and the combination increases the amount of remaining bone after remodeling is complete.
Assuntos
Conservadores da Densidade Óssea/administração & dosagem , Densidade Óssea/efeitos dos fármacos , Proteína Morfogenética Óssea 7/administração & dosagem , Transplante Ósseo , Difosfonatos/administração & dosagem , Imidazóis/administração & dosagem , Osteogênese/efeitos dos fármacos , Animais , Cultura em Câmaras de Difusão , Feminino , Humanos , Ratos , Ratos Sprague-Dawley , Transplante Autólogo , Ácido ZoledrônicoRESUMO
BACKGROUND:: Bisphosphonates have previously been shown to increase the density of impacted graft bone. In the present study we hypothesise that bisphosphonates also reduce early stem subsidence. We examined the effect of locally applied bisphosphonate to allografts on prosthetic micromotion and bone density in femoral stem revision with impaction grafting. METHODS:: 37 patients were randomised to either clodronate or saline as local adjunct to the morsellised allograft bone. 24 patients were finally analysed per protocol and evaluated by dual-energy x-ray absorptiometry (DXA) during the first year and with radiostereometric analysis (RSA) for 5 years. RESULTS:: There were no significant differences neither in bone density, nor in migratory behaviour between the groups. The femoral stems had subsided 3.6 mm in both groups (p = 0.99) at 5 years and there was no difference as measured over time with mixed models analysis. The clinical outcome was good in both groups. CONCLUSION:: Clodronate as a local addendum to allograft bone in hip revision did not increase bone density or reduce micromotion of the implant.
Assuntos
Artroplastia de Quadril/métodos , Conservadores da Densidade Óssea/administração & dosagem , Transplante Ósseo/métodos , Difosfonatos/administração & dosagem , Prótese de Quadril , Reoperação/métodos , Absorciometria de Fóton , Idoso , Idoso de 80 Anos ou mais , Densidade Óssea , Método Duplo-Cego , Feminino , Fêmur/cirurgia , Seguimentos , Humanos , Masculino , Pessoa de Meia-Idade , Falha de Prótese , Análise Radioestereométrica , Transplante HomólogoRESUMO
Long-term stability of endosseous implants depends on successful bone formation, ingrowth and adaptation to the implant. Specifically, it will define the mechanical properties of the newly formed bone-implant interface. 3D imaging during mechanical loading tests (in situ loading) can improve the understanding of the local processes leading to bone damage and failure. In this study, titanium screws were implanted into rat tibiae and were allowed to integrate for 4 weeks with or without the addition of the growth factor Bone Morphogenetic Protein and the bisphosphonate Zoledronic Acid. Samples were subjected to in situ pullout using high-resolution synchrotron x-ray tomography at the Tomcat beamline (SLS, PSI, Switzerland) at 30 keV with 25 ms exposure time, resulting in a total acquisition time of 45 s per scan, with a 3.6 µm isotropic voxel size. Using a custom-made loading device positioned inside the beamline, screws were pulled out with 0.05 mm increment, acquiring multiple scans until rupture of the sample. The in situ loading protocol was adapted to ensure short imaging time, which enabled multiple samples to be tested with short loading steps, while keeping the total testing time low and reducing dose deposition. Higher trabecular bone content was quantified in the surrounding of the screw in the treated groups, which correlated with increased mechanical strength and stiffness. Differences in screw implantation, such as contact between threads and cortex as well as minor tilt of the screw were also correlated to the mechanical parameters. In situ loading enabled the investigation of crack propagation during the pullout, highlighting the mechanical behavior of the interface. Three typical crack types were observed: (1) rupture at the interface of trabecular and cortical bone tissues, close to the screw, (2) large crack inside the cortex connected to the implant, and (3) first failure away from the screw with cracks propagating toward the screw-bone interface. Mechanical properties of in vivo integrated bone-metal screws rely on a combination of multiple parameters that are difficult to identify and separate one from the other.
RESUMO
Metallic implants are commonly used as surgical treatments for many orthopedic conditions. The long-term stability of implants relies on an adequate integration with the surrounding bone. Unsuccessful integration could lead to implant loosening. By combining mechanical loading with high-resolution 3D imaging methods, followed by image analysis such as Digital Volume Correlation (DVC), we aim at evaluating ex vivo the mechanical resistance of newly formed bone at the interface. X-rays tomography is commonly used to image bone but induces artefacts close to metallic components. Utilizing a different interaction with matter, neutron tomography is a promising alternative but has not yet been used in studies of bone mechanics. This work demonstrates that neutron tomography during in situ loading is a feasible tool to characterize the mechanical response of bone-implant interfaces, especially when combined with DVC. Experiments were performed where metal screws were implanted in rat tibiae during 4 weeks. The screws were pulled-out while the samples were sequentially imaged in situ with neutron tomography. The images were analyzed to quantify bone ingrowth around the implants. DVC was used to track the internal displacements and calculate the strain fields in the bone during loading. The neutron images were free of metal-related artefacts, which enabled accurate quantification of bone ingrowth on the screw (ranging from 60% to 71%). DVC allowed successful identification of the deformation and cracks that occurred during mechanical loading and led to final failure of the bone-implant interface.