Investigating Pathways to Minimize Sensor Power Usage for the Internet of Remote Things.

The Internet of Remote Things (IoRT) offers an exciting landscape for the development and deployment of remote wireless sensing nodes (WSNs) which can gather useful environmental data. Low Power Wide Area Networks (LPWANs) provide an ideal network topology for enabling the IoRT, but due to the remote location of these WSNs, the power and energy requirements for such systems must be accurately determined before deployment, as devices will be running on limited energy resources, such as long-life batteries or energy harvesting. Various sensor modules that are available on the consumer market are suitable for these applications; however, the exact power requirements and characteristics of the sensor are often not stated in datasheets, nor verified experimentally. This study details an experimental procedure where the energy requirements are measured for various sensor modules that are available for Arduino and other microcontroller units (MCUs). First, the static power consumption of continually powered sensors was measured. The impact of sensor warm-up time, associated with powering on the sensor and waiting for reliable measurements, is also explored. Finally, the opportunity to reduce power for sensors which have multiple outputs was investigated to see if there is any significant reduction in power consumption when obtaining readings from fewer outputs than all that are available. It was found that, generally, CO2 and soil moisture sensors have a large power requirement when compared with temperature, humidity and pressure sensors. Limiting multiple sensor outputs was shown not to reduce power consumption. The warm-up time for analog sensors and digital sensors was generally negligible and in the order of 10-50 ms. However, one CO2 sensor had a large overhead warm-up time of several seconds which added a significant energy burden. It was found that more, or as much, power could be consumed during warm-up as during the actual measurement phase. Finally, this study found disparity between power consumption values in datasheets and experimental measurements, which could have significant consequences in terms of battery life in the field.

Carbon Dioxide Monitoring inside an Australian Brewery Using an Internet-of-Things Sensor Network.

Maintaining a high standard of indoor air quality (IAQ) is vital to ensuring good human health. The concentration of CO2 in air is a good proxy for IAQ, while high levels of CO2 have been shown to cause cognitive or physiological impairment. Work environments that generate CO2 as an inherent part of their business present a unique and significant risk in terms of poor IAQ. Craft breweries generate CO2 and, unlike larger breweries, often lack the technology to capture and re-use the fermentation CO2 for beer carbonation. The purpose of this study is to demonstrate that the venting of fermentation CO2 and the unintentional venting of CO2 during the filling of CO2 storage tanks can cause the indoor CO2 levels to rise significantly. This is shown by monitoring CO2 levels inside an Australian craft brewery using a newly developed system containing three Internet of Things (IoT) sensor nodes positioned strategically in different sections of the brewery. The maximum CO2 level recorded was in excess of 18,000 ppm, with the maximum time period levels exceeding 1000 and 10,000 ppm being equivalent to 425 and 26 min, respectively. The identification of differences in measured CO2 at different times and locations throughout the brewery reveals that a single hard-wired CO2 sensor may be inadequate to support IAQ monitoring. For this purpose, a network of portable or wearable CO2 sensor nodes may be most suitable. The battery life of the sensors is a key consideration, and the current sensor battery life is too short. Low-power sensors and communication protocols are recommended for this task.

Internet-of-Things-Enabled Smart Bed Rail for Application in Hospital Beds.

This article presents an atypical offline based LoRaWAN application for use in hospital settings, where the ability to maintain network connectivity during internet connection disruption is paramount. A prototype bed rail is demonstrated, providing advanced functionality compared to traditional bed rails. The manufactured prototype provides data to a nurses station reliably and operates under battery backup. The power consumption of the system under different transmission intervals was tested, allowing appropriate battery sizing for different applications to be specified accurately. It is expected that a single LoRaWAN gateway will be able to cover bed rails across an entire modern hospital, allowing minimal infrastructure cost to implement the device or application in a rapidly deployed field hospital.

Energy Performance Analysis and Modelling of LoRa Prototyping Boards.

LoRaWAN has gained significant attention for Internet-of-Things (IOT) applications due to its low power consumption and long range potential for data transmission. While there is a significant body of work assessing LoRA coverage and data transmission characteristics, there is a lack of data available about commercially available LoRa prototyping boards and their power consumption, in relation to their features. It is currently difficult to estimate the power consumption of a LoRa module operating under different transmission profiles, due to a lack of manufacturer data available. In this study, power testing has been carried out on physical hardware and significant variation was found in the power consumption of competing boards, all marketed as "extremely low power". In this paper, testing results are presented alongside an experimentally-derived power model for the lowest power LoRa module, and power requirements are compared to firmware settings. The power analysis adds to existing work showing trends in data-rate and transmission power settings effects on electrical power consumption. The model's accuracy is experimentally verified and shows acceptable agreement to estimated values. Finally, applications for the model are presented by way of a hypothetical scenario and calculations performed in order to estimate battery life and energy consumption for varying data transmission intervals.

Design optimization of a magnesium-based metal hydride hydrogen energy storage system.

Metal hydrides (MH) are known as one of the most suitable material groups for hydrogen energy storage because of their large hydrogen storage capacity, low operating pressure, and high safety. However, their slow hydrogen absorption kinetics significantly decreases storage performance. Faster heat removal from MH storage can play an essential role to enhance its hydrogen absorption rate, resulting in better storage performance. In this regard, the present study aims to improve heat transfer performance to positively impact the hydrogen absorption rate of MH storage systems. A novel semi-cylindrical coil is first designed and optimized for hydrogen storage and embedded as an internal heat exchanger with air as the heat transfer fluid (HTF). The effect of novel heat exchanger configurations is analyzed and compared with normal helical coil geometry, based on various pitch sizes. Furthermore, the operating parameters of MH storage and HTF are numerically investigated to obtain optimal values. ANSYS Fluent 2020 R2 is utilized for the numerical simulations. Results from this study demonstrate that MH storage performance is significantly improved by using a semi-cylindrical coil heat exchanger (SCHE). The hydrogen absorption duration reduces by 59% compared to a normal helical coil heat exchanger. The lowest coil pitch from SCHE leads to a 61% reduction of the absorption time. In terms of operating parameters for the MH storage with SCHE, all selected parameters provide a major improvement in the hydrogen absorption process, especially the inlet temperature of the HTF.