RESUMO
Advanced encryption and decryption strategies are of great significance for information protection and data security. Visual optical information encryption and decryption technology plays an important role in the field of information security. However, the current optical information encryption technologies have shortcomings such as the need for external decryption equipment, the inability to read out repeatedly, and information leakage, which hinder their practical application. By combining the excellent thermal response characteristics of the MXene-isocyanate propyl triethoxy silane (IPTS)/polyethylene (PE) bilayer and the structural color generated from the laser fabricated biomimetic structural color surface, an approach of encrypt, decrypt, and transmit information has been proposed. The microgroove-induced structural color is attached to the MXene-IPTS/PE bilayer to form a colored soft actuator (CSA) to realize information encryption and decryption, and information transmission. Benefiting from the unique photon-thermal response of the bilayer actuator and the precise spectrum response of the microgroove-induced structural color, the information encryption and decryption system has the advantages of being simple and reliable, which has the potential application in the field of optical information security.
RESUMO
Manipulation of droplets has increasingly garnered global attention, owing to its multifarious potential applications, including microfluidics and medical diagnostic tests. To control the droplet motion, geometry-gradient-based passive transport has emerged as a well-established strategy, which induces a Laplace pressure difference based on the droplet radius differences in confined state and transport droplets with no consumption of external energy, whereas this transportation method has inevitably shown some critical limitations: unidirectionality, uncontrollability, short moving distance, and low velocity. Herein, a magnetocontrollable lubricant-infused microwall array (MLIMA) is designed as a key solution to this issue. In the absence of a magnetic field, droplets can spontaneously travel from the tip toward the root of the structure as a result of the geometry-gradient-induced Laplace pressure difference. When the subject of an external magnetic field, the microwalls bend and overlap sequentially, ultimately resulting in the formation of a continuous slippery meniscus surface. The formed meniscus surface can exert sufficient propulsive force to surmount the Laplace pressure difference of the droplet, thereby effectuating active transport. Through the continuous movement of the microwalls, droplets can be actively transported against the Laplace pressure difference from the root to the tip side of the MLIMA or continue to actively move to the root after finishing the passive self-transport. This work demonstrates passive/active hybrid bidirectional droplet transport capabilities, validates its feasibility in the accurate control of droplet manipulation, and exhibits great potential in chemical microreactions, bioassays, and the medical field.
RESUMO
Manipulation of gas bubbles in an aqueous ambient environment is fundamental to both academic research and industrial settings. Present bubble manipulation strategies mainly rely on buoyancy or Laplace gradient forces arising from the sophisticated terrain of substrates. However, these strategies suffer from limited manipulation flexibility such as slow horizontal motion and unidirectional transport. In this paper, a high performance manipulation strategy for gas bubbles is proposed by utilizing ferrofluid-infused laser-ablated microstructured surfaces (FLAMS). A typical gas bubble (<2 µL) can be accelerated at >150 mm/s2 and reach an ultrafast velocity over 25 mm/s on horizontal FLAMS. In addition, diverse powerful manipulation capabilities are demonstrated including antibuoyancy motion, "freestyle writing", bubble programmable coalescence, three-dimensional (3-D) controllable motion and high towing capacity of steering macroscopic object (>500 own mass) on the air-water interface. This strategy shows terrain compatibility, programmable design, and fast response, which will find potential applications in water treatment, electrochemistry, and so on.
RESUMO
Over the last few years, the cumulative use of antibiotics in healthcare institutions, as well as the rearing of livestock and poultry, has resulted in the accumulation of antibiotic resistance genes (ARGs). This presents a substantial danger to human health worldwide. The characteristics of airborne ARGs, especially those transferred from outdoors to indoors, remains largely unexplored in neighborhoods, even though a majority of human population spends most of their time there. We investigated airborne ARGs and mobile genetic element (MGE, IntI1), plant communities, and airborne microbiota transferred indoors, as well as respiratory disease (RD) prevalence using a combination of metabarcode sequencing, real-time quantitative PCR and questionnaires in 72 neighborhoods in Shanghai. We hypothesized that (i) urbanization regulates ARGs abundance, (ii) the urbanization effect on ARGs varies seasonally, and (iii) land use types are associated with ARGs abundance. Supporting these hypotheses, during the warm season, the abundance of ARGs in peri-urban areas was higher than in urban areas. The abundance of ARGs was also affected by the surrounding land use and plant communities: an increase in the proportion of gray infrastructure (e.g., residential area) around neighborhoods can lead to an increase in some ARGs (mecA, qnrA, ermB and mexD). Additionally, there were variations observed in the relationship between ARGs and bacterial genera in different seasons. Specifically, Stenotrophomonas and Campylobacter were positively correlated with vanA during warm seasons, whereas Pseudomonas, Bacteroides, Treponema and Stenotrophomonas positively correlated with tetX in the cold season. Interstingly, a noteworthy positive correlation was observed between the abundance of vanA and the occurrence of both rhinitis and rhinoconjunctivitis. Taken together, our study underlines the importance of urbanization and season in controlling the indoor transfer of airborne ARGs. Furthermore, we also highlight the augmentation of green-blue infrastructure in urban environments has the potential to mitigate an excess of ARGs.
Assuntos
Genes Bacterianos , Urbanização , Humanos , Antibacterianos/farmacologia , China , Resistência Microbiana a Medicamentos/genéticaRESUMO
The functionality of tunable liquid droplet adhesion is crucial for many applications such as self-cleaning surfaces and water collectors. However, it is still a challenge to achieve real-time and fast reversible switching between isotropic and anisotropic liquid droplet rolling states. Inspired by the surface topography on lotus leaves and rice leaves, herein we report a biomimetic hybrid surface with gradient magnetism-responsive micropillar/microplate arrays (GMRMA), featuring dynamic fast switching toward different droplet rolling states. The exceptional dynamic switching characteristics of GMRMA are visualized and attributed to the fast asymmetric deformation between the two different biomimetic microstructures under a magnetic field; they endow the rolling droplets with anisotropic interfacial resistance. Based on the exceptional morphology switching surface, we demonstrate the function of classification and screening of liquid droplets, and thus propose a new strategy for liquid mixing and potential microchemical reactions. It is expected that this intelligent GMRMA will be conducive to many engineering applications, such as microfluidic devices and microchemical reactors.
RESUMO
The formation of a stable gas cavity on the surfaces of solid bodies is essential for many practical applications, such as drag reduction and energy savings, owing to the transformation of the originally sticky solid-liquid interface into a free-slip liquid-vapor interface by the creation of either liquid repellency or a Leidenfrost state on the surfaces. Here, it is shown that the simple infusion of a textured sphere with a smooth, slippery liquid layer can more easily create and sustain a stable gas cavity in a liquid at lower impact velocities compared to a dry solid sphere with the same contact angle. With a key parameter of curvature ratio, the early lamella dynamics during water entry of spheres and drops impact on planes are first unified. With the perspective of wetting transition, the unforeseen phenomenon of prone to cavity formation are successfully explained, which is the preferential lamella detachment from a slippery surface due to the higher viscosity of the lubricant relative to air. It is envisioned that the findings will provide an important and fundamental contribution to the quest for energy-efficient transport.
RESUMO
High-performance droplet transport is crucial for diverse applications including biomedical detection, chemical micro-reaction, and droplet microfluidics. Despite extensive progress, traditional passive and active strategies are restricted to limited liquid types, small droplet volume ranges, and poor biocompatibilities. Moreover, more challenges occur for biological fluids due to large viscosity and low surface tension. Here, a vibration-actuated omni-droplets rectifier (VAODR) consisting of slippery ratchet arrays fabricated by femtosecond laser and vibration platforms is reported. Through the relative competition between the asymmetric adhesive resistance originating from the lubricant meniscus on the VAODR and the periodic inertial driving force originating from isotropic vibration, the fast (up to ≈60 mm s-1 ), programmable, and robust transport of droplets is achieved for a large volume range (0.05-2000 µL, Vmax /Vmin ≈ 40â¯000) and in various transport modes including transport of liquid slugs in tubes, programmable and sequential transport, and bidirectional transport. This VAODR is general to a high diversity of biological and medical fluids, and thus can be used for biomedical detection including ABO blood-group tests and anticancer drugs screening. These strategies provide a complementary and promising platform for maneuvering omni-droplets that are fundamental to biomedical applications and other high-throughput omni-droplet operation fields.
Assuntos
Microfluídica , Vibração , Lasers , Fenômenos Mecânicos , Tensão SuperficialRESUMO
The flexible maneuvering of microliter liquid droplets is significant in both fundamental science and practical applications. However, most current strategies are limited to the rigid locomotion on confined geographies platforms, which greatly hinder their practical uses. Here, we propose a magnetism-actuated superhydrophobic flexible microclaw (MSFM) with hierarchical structures for water droplet manipulation. By virtue of precise femtosecond laser patterning on magnetism-responsive poly(dimethylsiloxane) (PDMS) films doped with carbonyl iron powder, this MSFM without chemical contamination exhibits powerful spatial droplet maneuvering advantages with fast response (<100 ms) and lossless water transport (â¼50 cycles) in air. We further performed quantitative analysis of diverse experimental parameters including petal number, length, width, and iron element proportion in MSFM impacting the applicable maneuvering volumes. By coupling the advantages of spatial maneuverability and fast response into this versatile platform, typical unique applications are demonstrated such as programmable coalescence of droplets, collecting debris via droplets, tiny solid manipulation in aqueous severe environments, and harmless living creature control. We envision that this versatile MSFM should provide great potential for applications in microfluidics and cross-species robotics.
Assuntos
Dimetilpolisiloxanos/química , Compostos Carbonílicos de Ferro/química , Meios de Transporte/instrumentação , Animais , Desenho de Equipamento , Interações Hidrofóbicas e Hidrofílicas , Isópodes , Fenômenos Magnéticos , Fenômenos Mecânicos , Meios de Transporte/métodos , Água , MolhabilidadeRESUMO
Manipulating underwater bubbles (UGBs) is realized on morphology-tailored or stimuli-responsive slippery lubricant-impregnated porous surface (SLIPS). Unfortunately, the volatile lubricants (e. g., silicone oil, ferrofluid) greatly decrease their using longevity. Designed is light-responsive paraffin-infused Fe3O4-doped slippery surface (LR-PISS) by incorporation of hybrid lubricants and superhydrophobic micropillar-arrayed elastometric membranes resulted from one-step femtosecond laser vertically scanning. Upon LR-PISS, the dynamic motion control bwteen pinning and sliding along free routes over UGB could be realized by alternately loading/discharging NIR-trigger. The underlying principle is that when the NIR was applied, UGB would be actuated to slide along the NIR trace because the irradiated domain melts for a slippery surface within 1.0 s. Once the NIR is removed, the liquefied paraffin would be reconfigured to solid phase for pinning a moving UGB within 0.5 s. Newly explored hydrokinetics imparts us with capability of steering UGBs to arrange any desirable patterns and switch light-path behaving as the light-control-light optical shutter. In comparison with previously reported SLIPS, current LR-PISS unfolds unparalleled ultrarobust antidisturbance ability even in flowing liquid ambient. More significantly, even subjected to physical damage, underwater LR-PISS is capable of in situ self-healing within 13 s under the assistance of remote NIR. The results here could inspire the design of robust bubble manipulator and further boost their applications in optofluidics and all-optical modulators.
RESUMO
The on-demand manipulation of gas bubbles in aqueous ambient environments is fundamental to many fields such as microfluidics and biochemical microanalysis. However, most bubble manipulation strategies are limited to restricted locomotion on the confined surfaces without spatial convenience of transport. Herein, we report a kind of biomimetic bubble manipulator with mechanoswitchable interfaces (MSIs), featuring the advantages of parallel bubble control and spatial maneuvering flexibility. By the synergic action between Janus aluminum membrane and superaerophilic microfiber array, the gas-MSI interfacial adhesion can be reversibly switched to achieve capturing/releasing underwater bubbles. Moreover, the adhesion force of MSI can be readily tuned by diverse experimental parameters including surface roughness, fiber number, diameter, and spacing of the neighboring microfibers, which are further systematically investigated. Relying on this mobile platform, we demonstrate a series of powerful applications including bubble parallel control, bubble array regrouping, arbitrary bubble transport and even manipulating underwater solids through bubbles, which are otherwise challenging for conventional approaches. We envision that this versatile platform will bring new insights into potential applications, such as cross-species sample control and handheld gas microsyringe.
RESUMO
Manipulating gas bubbles in aqueous ambient is of great importance for applications in water treatment, gas collection, and matter transport. Here, a kind of Janus foam is designed and fabricated by one-step ultrafast laser ablation of one side of the copper film, which is treated to be superhydrophobic. Janus foam exhibits not only the capability of unidirectional transport of underwater bubbles but also gas collection with favorable efficiency up to â¼15 mL cm-2 min-1. The underlying physical mechanism is attributed to the cooperation of the buoyancy, adhesion, and wetting gradient forces imposed on the bubbles. As a paradigm, the underwater chemical reaction between the unidirectional CO2 gas flow and the alkaline phenolphthalein solution is demonstrated via Janus foam. This facile and low-cost fabrication approach for Janus foam will find broad potential applications in effective bubble transport, carbon capture, and controllable chemical reactions under aqueous conditions.