Core-Level Photoelectron Angular Distributions at the Liquid-Vapor Interface.

ConspectusPhotoelectron spectroscopy (PES) is a powerful tool for the investigation of liquid-vapor interfaces, with applications in many fields from environmental chemistry to fundamental physics. Among the aspects that have been addressed with PES is the question of how molecules and ions arrange and distribute themselves within the interface, that is, the first few nanometers into solution. This information is of crucial importance, for instance, for atmospheric chemistry, to determine which species are exposed in what concentration to the gas-phase environment. Other topics of interest include the surface propensity of surfactants, their tendency for orientation and self-assembly, as well as ion double layers beneath the liquid-vapor interface. The chemical specificity and surface sensitivity of PES make it in principle well suited for this endeavor. Ideally, one would want to access complete atomic-density distributions along the surface normal, which, however, is difficult to achieve experimentally for reasons to be outlined in this Account. A major complication is the lack of accurate information on electron transport and scattering properties, especially in the kinetic-energy regime below 100 eV, a pre-requisite to retrieving the depth information contained in photoelectron signals.In this Account, we discuss the measurement of the photoelectron angular distributions (PADs) as a way to obtain depth information. Photoelectrons scatter with a certain probability when moving through the bulk liquid before being expelled into a vacuum. Elastic scattering changes the electron direction without a change in the electron kinetic energy, in contrast to inelastic scattering. Random elastic-scattering events usually lead to a reduction of the measured anisotropy as compared to the initial, that is, nascent PAD. This effect that would be considered parasitic when attempting to retrieve information on photoionization dynamics from nascent liquid-phase PADs can be turned into a powerful tool to access information on elastic scattering, and hence probing depth, by measuring core-level PADs. Core-level PADs are relatively unaffected by effects other than elastic scattering, such as orbital character changes due to solvation. By comparing a molecule's gas-phase angular anisotropy, assumed to represent the nascent PAD, with its liquid-phase anisotropy, one can estimate the magnitude of elastic versus inelastic scattering experienced by photoelectrons on their way to the surface from the site at which they were generated. Scattering events increase with increasing depth into solution, and thus it is possible to correlate the observed reduction in angular anisotropy with the depth below the surface along the surface normal.We will showcase this approach for a few examples. In particular, our recent works on surfactant molecules demonstrated that one can indeed probe atomic distances within these molecules with a high sensitivity of ∼1 Šresolution along the surface normal. We were also able to show that the anisotropy reduction scales linearly with the distance along the surface normal within certain limits. The limits and prospects of this technique are discussed at the end, with a focus on possible future applications, including depth profiling at solid-vapor interfaces.

Surface accumulation and acid-base equilibrium of phenol at the liquid-vapor interface.

We have investigated the surfactant properties of phenol in aqueous solution as a function of pH and bulk concentration using liquid-jet photoelectron spectroscopy (LJ-PES) and surface tension measurements. The emphasis of this work is on the determination of the Gibbs free energy of adsorption and surface excess of phenol and its conjugate base phenolate at the bulk pKa (9.99), which can be determined for each species using photoelectron spectroscopy. These values are compared to those obtained in measurements well below and well above the pKa, where pure phenol or phenolate, respectively, are the dominant species, and where the Gibbs free energy of adsorption determined from surface tension and LJ-PES data are in excellent agreement. At the bulk pKa the surface-sensitive LJ-PES measurements show a deviation of the expected phenol/phenolate ratio in favor of phenol, i.e., an apparent upward shift of the at the surface. In addition, the Gibbs free energies of adsorption determined by LJ-PES at the bulk pKa for phenol and phenolate deviate from those observed for the pure solutions. We discuss these observations in view of the different surface propensity of phenol and phenolate as well as potential cooperative interactions between them in the near-surface region.

Correction: Photoelectron angular distributions as sensitive probes of surfactant layer structure at the liquid-vapor interface.

Correction for 'Photoelectron angular distributions as sensitive probes of surfactant layer structure at the liquid-vapor interface' by Rémi Dupuy et al., Phys. Chem. Chem. Phys., 2022, 24, 4796-4808, https://doi.org/10.1039/D1CP05621B.

Influence of Excess Charge on Water Adsorption on the BiVO4(010) Surface.

We present a combined computational and experimental study of the adsorption of water on the Mo-doped BiVO4(010) surface, revealing how excess electrons influence the dissociation of water and lead to hydroxyl-induced alterations of the surface electronic structure. By comparing ambient pressure resonant photoemission spectroscopy (AP-ResPES) measurements with the results of first-principles calculations, we show that the dissociation of water on the stoichiometric Mo-doped BiVO4(010) surface stabilizes the formation of a small electron polaron on the VO4 tetrahedral site and leads to an enhanced concentration of localized electronic charge at the surface. Our calculations demonstrate that the dissociated water accounts for the enhanced V4+ signal observed in ambient pressure X-ray photoelectron spectroscopy and the enhanced signal of a small electron polaron inter-band state observed in AP-ResPES measurements. For ternary oxide surfaces, which may contain oxygen vacancies in addition to other electron-donating dopants, our study reveals the importance of defects in altering the surface reactivity toward water and the concomitant water-induced modifications to the electronic structure.

Photoelectron angular distributions as sensitive probes of surfactant layer structure at the liquid-vapor interface.

The characterization of liquid-vapor interfaces at the molecular level is an important underpinning for a basic understanding of fundamental heterogeneous processes in many areas, such as atmospheric science. Here we use X-ray photoelectron spectroscopy to study the adsorption of a model surfactant, octanoic acid, at the water-gas interface. In particular, we examine the information contained in photoelectron angular distributions and show that information about the relative depth of molecules and functional groups within molecules can be obtained from these measurements. Focusing on the relative location of carboxylate (COO-) and carboxylic acid (COOH) groups at different solution pH, the former is found to be immersed deeper into the liquid-vapor interface, which is confirmed by classical molecular dynamics simulations. These results help establish photoelectron angular distributions as a sensitive tool for the characterization of molecules at the liquid-vapor interface.

Filter Functions for Quantum Processes under Correlated Noise.

Many qubit implementations are afflicted by correlated noise not captured by standard theoretical tools that are based on Markov approximations. While independent gate operations are a key concept for quantum computing, it is actually not possible to fully describe noisy gates locally in time if noise is correlated on times longer than their duration. To address this issue, we develop a method based on the filter function formalism to perturbatively compute quantum processes in the presence of correlated classical noise. We derive a composition rule for the filter function of a sequence of gates in terms of those of the individual gates. The joint filter function allows us to efficiently compute the quantum process of the whole sequence. Moreover, we show that correlation terms arise which capture the effects of the concatenation and, thus, yield insight into the effect of noise correlations on gate sequences. Our generalization of the filter function formalism enables both qualitative and quantitative studies of algorithms and state-of-the-art tools widely used for the experimental verification of gate fidelities like randomized benchmarking, even in the presence of noise correlations.

Roadmap on quantum nanotechnologies.

Quantum phenomena are typically observable at length and time scales smaller than those of our everyday experience, often involving individual particles or excitations. The past few decades have seen a revolution in the ability to structure matter at the nanoscale, and experiments at the single particle level have become commonplace. This has opened wide new avenues for exploring and harnessing quantum mechanical effects in condensed matter. These quantum phenomena, in turn, have the potential to revolutionize the way we communicate, compute and probe the nanoscale world. Here, we review developments in key areas of quantum research in light of the nanotechnologies that enable them, with a view to what the future holds. Materials and devices with nanoscale features are used for quantum metrology and sensing, as building blocks for quantum computing, and as sources and detectors for quantum communication. They enable explorations of quantum behaviour and unconventional states in nano- and opto-mechanical systems, low-dimensional systems, molecular devices, nano-plasmonics, quantum electrodynamics, scanning tunnelling microscopy, and more. This rapidly expanding intersection of nanotechnology and quantum science/technology is mutually beneficial to both fields, laying claim to some of the most exciting scientific leaps of the last decade, with more on the horizon.

Core level photoelectron spectroscopy of heterogeneous reactions at liquid-vapor interfaces: Current status, challenges, and prospects.

Liquid-vapor interfaces, particularly those between aqueous solutions and air, drive numerous important chemical and physical processes in the atmosphere and in the environment. X-ray photoelectron spectroscopy is an excellent method for the investigation of these interfaces due to its surface sensitivity, elemental and chemical specificity, and the possibility to obtain information on the depth distribution of solute and solvent species in the interfacial region. In this Perspective, we review the progress that was made in this field over the past decades and discuss the challenges that need to be overcome for investigations of heterogeneous reactions at liquid-vapor interfaces under close-to-realistic environmental conditions. We close with an outlook on where some of the most exciting and promising developments might lie in this field.

Water-polyamide chemical interplay in desalination membranes explored by ambient pressure X-ray photoelectron spectroscopy.

Reverse osmosis using aromatic polyamide membranes is currently the most important technology for seawater desalination. The performance of reverse osmosis membranes is highly dependent on the interplay of their surface chemical groups with water and water contaminants. In order to better understand the underlying mechanisms of these membranes, we study ultrathin polyamide films that chemically resemble reverse osmosis membranes, using ambient pressure X-ray photoelectron spectroscopy. This technique can identify the functional groups at the membrane-water interface and allows monitoring of small shifts in the electron binding energy that indicate interaction with water. We observe deprotonation of free acid groups and formation of a 'water complex' with nitrogen groups in the polymer upon exposure of the membrane to water vapour. The chemical changes are reversed when water is removed from the membrane. While the correlation between functional groups and water uptake is an established one, this experiment serves to understand the nature of their chemical interaction, and opens up possibilities for tailoring future materials to specific requirements.

Water adsorption on vanadium oxide thin films in ambient relative humidity.

In this work, ambient pressure x-ray photoelectron spectroscopy (APXPS) is used to study the initial stages of water adsorption on vanadium oxide surfaces. V 2p, O 1s, C 1s, and valence band XPS spectra were collected as a function of relative humidity in a series of isotherm and isobar experiments. Experiments were carried out on two VO2 thin films on TiO2 (100) substrates, prepared with different surface cleaning procedures. Hydroxyl and molecular water surface species were identified, with up to 0.5 ML hydroxide present at the minimum relative humidity, and a consistent molecular water adsorption onset occurring around 0.01% relative humidity. The work function was found to increase with increasing relative humidity, suggesting that surface water and hydroxyl species are oriented with the hydrogen atoms directed away from the surface. Changes in the valence band were also observed as a function of relative humidity. The results were similar to those observed in APXPS experiments on other transition metal oxide surfaces, suggesting that H2O-OH and H2O-H2O surface complex formation plays an important role in the oxide wetting process and water dissociation. Compared to polycrystalline vanadium metal, these vanadium oxide films generate less hydroxide and appear to be more favorable for molecular water adsorption.

Quantitative Characterization of a Desalination Membrane Model System by X-ray Photoelectron Spectroscopy.

Aromatic polyamide films form the active layer in reverse osmosis desalination membranes. Despite widespread use of this technology, it suffers from low rejection rates for certain water contaminants and from membrane fouling. Through a better understanding of the fundamental surface chemical processes during reverse osmosis desalination, advances in membrane and material design are expected. The recent invention of a molecular layer-by-layer (mLbL) preparation technique [ Johnson , P. M. ; Molecular Layer-by-Layer Deposition of Highly Crosslinked Polyamide Films . J. Polym. Sci., Part B: Polym. Phys. 2012 , 50 ( 3 ), 168 - 173 ] yields films that are sufficiently smooth to warrant investigation with high-resolution microscopy and spectroscopy methods. We present high-resolution, quantitative X-ray photoelectron spectroscopy (XPS) data on the surface chemistry of ultrathin polyamide films that can serve as a model system for desalination membranes. We show that a quantitative analysis of the XPS spectra gives information about the functional groups of the film as well as other compounds present due to the synthesis under ambient conditions. Unpolymerized functional groups are identified and aid in understanding the degree of cross-linking. Investigation of polymers with synchrotron-based XPS requires taking beam-induced changes into account. We quantify X-ray beam damage and show that beam damage to the polyamide is limited, allowing long-term investigation of thin polyamide films. Characterizing mLbL-grown films via high-resolution XPS is the basis for a better understanding of the chemical interplay of polyamide surface functional groups with the major components of desalination systems.

Decomposing electronic and lattice contributions in optical pump - X-ray probe transient inner-shell absorption spectroscopy of CuO.

Electronic and lattice contributions to picosecond time-resolved X-ray absorption spectra (trXAS) of CuO at the oxygen K-edge are analyzed by comparing trXAS spectra, recorded using excitation wavelengths of 355 nm and 532 nm, to steady-state, temperature-dependent XAS measurements. The trXAS spectra at pump-probe time-delays ≥150 ps are dominated by lattice heating effects. Insight into the temporal evolution of lattice temperature profiles on timescales up to 100s of nanoseconds after laser excitation are reported, on an absolute temperature scale, with a temporal sensitivity and a spatial selectivity on the order of 10s of picoseconds and 10s of nanometers, respectively, effectively establishing an "ultrafast thermometer". In particular, for the 532 nm experiment at ∼5 mJ cm-2 fluence, both the initial sample temperature and its dynamic evolution are well captured by a one-dimensional thermal energy deposition and diffusion model. The thermal conductivity k = (1.3 ± 0.4) W m-1 K-1 derived from this model is in good agreement with the literature value for CuO powder, kpowder = 1.013 W m-1 K-1. For 355 nm excitation, a quantitative analysis of the experiments is hampered by the large temperature gradients within the probed sample volume owing to the small UV penetration depth. The impact of the findings on mitigating or utilizing photoinduced lattice temperature changes in future X-ray free electron laser (XFEL) experiments is discussed.

Structure of Copper-Cobalt Surface Alloys in Equilibrium with Carbon Monoxide Gas.

We studied the structure of the copper-cobalt (CuCo) surface alloy, formed by Co deposition on Cu(110), in dynamic equilibrium with CO. Using scanning tunneling microscopy (STM), we found that, in vacuum at room temperature and at low Co coverage, clusters of a few Co atoms substituting Cu atoms form at the surface. At CO pressures in the Torr range, we found that up to 2.5 CO molecules can bind on a single Co atom, in carbonyl-like configurations. Based on high-resolution STM images, together with density functional theory calculations, we determined the most stable CuCo cluster structures formed with bound CO. Such carbonyl-like formation manifests in shifts in the binding energy of the Co core-level peaks in X-ray photoelectron spectra, as well as shifts in the vibrational modes of adsorbed CO in infrared reflection absorption spectra. The multiple CO adsorption on a Co site weakens the Co-CO bond and thus reduces the C-O bond scission probability. Our results may explain the different product distribution, including higher selectivity toward alcohol formation, when bimetallic CuCo catalysts are used compared to pure Co.

Water at Interfaces.

The interfaces of neat water and aqueous solutions play a prominent role in many technological processes and in the environment. Examples of aqueous interfaces are ultrathin water films that cover most hydrophilic surfaces under ambient relative humidities, the liquid/solid interface which drives many electrochemical reactions, and the liquid/vapor interface, which governs the uptake and release of trace gases by the oceans and cloud droplets. In this article we review some of the recent experimental and theoretical advances in our knowledge of the properties of aqueous interfaces and discuss open questions and gaps in our understanding.

Patterned formation of enolate functional groups on the graphene basal plane.

Chemical functionalization of graphene is one method pursued to engineer new properties into a graphene sheet. Graphene oxide is the most commonly used chemical derivative of graphene. Here we present experimental evidence for the formation of enolate moieties when oxygen atoms are added to the graphene basal plane. The exotic functional groups are stabilized by simultaneous bond formation between the graphene sheet and the underlying Ir(111) substrate. Scanning tunneling microscopy images demonstrate the patterned nature of C-O bond formation and X-ray photoelectron spectroscopy and high-resolution electron energy loss spectroscopy are used to characterize the enolate moiety. The results present a new mechanism for the formation of patterned graphene oxide and provide evidence of a functional group rarely considered for graphene oxide materials.

Graphene cover-promoted metal-catalyzed reactions.

Graphitic overlayers on metals have commonly been considered as inhibitors for surface reactions due to their chemical inertness and physical blockage of surface active sites. In this work, however, we find that surface reactions, for instance, CO adsorption/desorption and CO oxidation, can take place on Pt(111) surface covered by monolayer graphene sheets. Surface science measurements combined with density functional calculations show that the graphene overlayer weakens the strong interaction between CO and Pt and, consequently, facilitates the CO oxidation with lower apparent activation energy. These results suggest that interfaces between graphitic overlayers and metal surfaces act as 2D confined nanoreactors, in which catalytic reactions are promoted. The finding contrasts with the conventional knowledge that graphitic carbon poisons a catalyst surface but opens up an avenue to enhance catalytic performance through coating of metal catalysts with controlled graphitic covers.

Recycling of CO2: Probing the Chemical State of the Ni(111) Surface during the Methanation Reaction with Ambient-Pressure X-Ray Photoelectron Spectroscopy.

Using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS), we studied the adsorption and reactions of CO2 and CO2 + H2 on the Ni(111) surface to identify the surface chemical state and the nature of the adsorbed species during the methanation reaction. In 200 mTorr CO2, we found that NiO is formed from CO2 dissociation into CO and atomic oxygen. Additionally, carbonate (CO32-) is present on the surface from further reaction of CO2 with NiO. The addition of H2 into the reaction environment leads to reduction of NiO and the disappearance of CO32-. At temperatures >160 °C, CO adsorbed on hollow sites, and atomic carbon and OH species are present on the surface. We conclude that the methanation reaction proceeds via dissociation of CO2, followed by reduction of CO to atomic carbon and its hydrogenation to methane.

Insights into electrochemical reactions from ambient pressure photoelectron spectroscopy.

The understanding of fundamental processes in the bulk and at the interfaces of electrochemical devices is a prerequisite for the development of new technologies with higher efficiency and improved performance. One energy storage scheme of great interest is splitting water to form hydrogen and oxygen gas and converting back to electrical energy by their subsequent recombination with only water as a byproduct. However, kinetic limitations to the rate of oxygen-based electrochemical reactions hamper the efficiency in technologies such as solar fuels, fuel cells, and electrolyzers. For these reactions, the use of metal oxides as electrocatalysts is prevalent due to their stability, low cost, and ability to store oxygen within the lattice. However, due to the inherently convoluted nature of electrochemical and chemical processes in electrochemical systems, it is difficult to isolate and study individual electrochemical processes in a complex system. Therefore, in situ characterization tools are required for observing related physical and chemical processes directly at the places where and while they occur and can help elucidate the mechanisms of charge separation and charge transfer at electrochemical interfaces. X-ray photoelectron spectroscopy (XPS), also known as ESCA (electron spectroscopy for chemical analysis), has been used as a quantitative spectroscopic technique that measures the elemental composition, as well as chemical and electronic state of a material. Building from extensive ex situ characterization of electrochemical systems, initial in situ studies were conducted at or near ultrahigh vacuum (UHV) conditions (≤10(-6) Torr) to probe solid-state electrochemical systems. However, through the integration of differential-pumping stages, XPS can now operate at pressures in the torr range, comprising a technique called ambient pressure XPS (AP-XPS). In this Account, we briefly review the working principles and current status of AP-XPS. We use several recent in situ studies on model electrochemical components as well as operando studies performed by our groups at the Advanced Light Source (ALS) at Lawrence Berkeley National Laboratory to illustrate that AP-XPS is both a chemically and an electrically specific tool since photoelectrons carry information on both the local chemistry and electrical potentials. The applications of AP-XPS to oxygen electrocatalysis shown in this Account span well-defined studies of (1) the oxide/oxygen gas interface, (2) the oxide/water vapor interface, and (3) operando measurements of half and full electrochemical cells. Using specially designed model devices, we can expose and isolate the electrode or interface of interest to the incident X-ray beam and AP-XPS analyzer to relate the electrical potentials to the composition/chemical state of the key components and interfaces. We conclude with an outlook on new developments of AP-XPS end stations, which may provide significant improvement in the observation of dynamics over a wide range of time scales, higher spatial resolution, and improved characterization of boundary or interface layers (solid/solid and liquid/solid).

A soft X-ray spectroscopic perspective of electron localization and transport in tungsten doped bismuth vanadate single crystals.

Doped BiVO4 is a promising photoelectrochemical water splitting anode, whose activity is hampered by poor charge transport. Here we use a set of X-ray spectroscopic methods to probe the origin and nature of localized electron states in W:BiVO4. Furthermore, using the polarized nature of the X-rays, we probe variations in the electronic structure along the crystal axes. In this manner, we reveal aspects of the electronic structure related to electron localization and observations consistent with conductivity anisotropy between the ab-plane and c-axis. We verify that tungsten substitutes as W6+ for V5+ in BiVO4. This is shown to result in the presence of inter-band gap states related to electrons at V4+ sites of e symmetry. The energetic position of the states in the band gap suggest that they are highly localized and may act as recombination centres. Polarization dependent X-ray absorption spectra reveal anisotropy in the electronic structure between the ab-plane and c-axis. Results show the superior hybridization between V 3d and O 2p states, higher V wavefunction overlap and broader conduction bands in the ab-plane than in the c-axis. These insights into the electronic structure are discussed in the context of existing experimental and theoretical reports regarding charge transport in BiVO4.

Electron Spectroscopy and Computational Studies of Dimethyl Methylphosphonate.

Dimethyl methylphosphonate (DMMP) is one of the most widely used molecules to simulate chemical warfare agents in adsorption experiments. However, the details of the electronic structure of the isolated molecule have not yet been reported. We have directly probed the occupied valence and core levels using gas phase photoelectron spectroscopy and the unoccupied states using near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Density functional theory (DFT) calculations were used to study the electronic structure, assign the spectral features, and visualize the molecular orbitals. Comparison with parent molecules shows that valence and core-level binding energies of DMMP follow trends of functional group substitution on the P center. The photoelectron and NEXAFS spectra of the isolated molecule will serve as a reference in studies of DMMP adsorbed on surfaces.