RESUMO
BACKGROUND: The distribution of dental abnormalities among cleft patients concerning cleft type frequently poses ambiguity wherefore the aim of this study was to evaluate the prevalence of hypodontia and supernumerary teeth in an exemplary German cleft population dependent on the cleft type. METHODS: Radiographs and dental records of cleft patients, which had been treated and followed up in the Department of Oral and Maxillofacial Surgery, University Hospital Carl Gustav Carus Campus, Dresden, Germany (investigation period of 22 years) were evaluated concerning hypodontia and supernumerary teeth dependent on the cleft type. Out of 386 records, 108 patients met the inclusion criteria: non-syndromic cleft of the alveolus with or without palate (CL/P), at least one clear panoramic x-ray, sufficient dental records. Statistical analysis was performed using x-square and binominal test (p ≤ 0.05). RESULTS: Hypodontia was more frequent (54/50%) than supernumerary teeth (36/33.3%) and was more common in bilateral clefts of the lip and palate (BCLP) (70.1%) than in unilateral clefts of the lip and palate (UCLP) (51.6%) or clefts of the lip and alveolus (CLA) (34.5%) (p << 0.001). There was an average of 0.9 missing teeth per patient, thereof the upper lateral incisor was most often affected (23.2%). In contrast, supernumerary teeth were more frequent in CLA (51.7%; p = 0.014) than UCLP (29.0%) and BCLP patients (17.6%). CONCLUSION: The prevalence for numerical dental anomalies was significantly different among the cleft types. Hypodontia significantly increased with the extend of the cleft, whereas the prevalence of supernumerary teeth decreased.
Assuntos
Anodontia , Fenda Labial , Fissura Palatina , Anormalidades Dentárias , Dente Supranumerário , Anodontia/diagnóstico por imagem , Anodontia/epidemiologia , Fenda Labial/epidemiologia , Fissura Palatina/epidemiologia , Alemanha/epidemiologia , Humanos , Palato , Prevalência , Dente Supranumerário/diagnóstico por imagem , Dente Supranumerário/epidemiologiaRESUMO
BACKGROUND Cleft defects are one of the most frequent birth-deformities of the orofacial region and they are commonly associated with anomalies of the tooth structure, size, shape, formation, eruption, and tooth number. The aim of our study was to evaluate the prevalence, distribution, and potential association of combined hypodontia in cleft-affected patients with regard to all types of teeth in both jaws in the permanent dentition. MATERIAL AND METHODS This retrospective radiographic analysis included patients with various types of clefts treated orthodontically in the Department of Orofacial Orthopedics and Orthodontics at Heim Pàl Children's Hospital, Budapest. There were 150 patients (84 males, 66 females) with non-syndromic unilateral (UCLP; n=120 patients) or bilateral (BCLP; n=30 patients) cleft formation (lip, alveolus and palate) who met the inclusion criteria. Statistical analysis was performed using the chi-square test and Fisher's exact test (significance level p<0.05). RESULTS Hypodontia was significantly more frequent in patients with cleft-sided lateral incisor (104 patients, 69%), with a total of 235 missing teeth, followed by the second premolars of the upper and lower jaw. A significant correlation of congenital missing teeth was observed in left-sided clefts between the upper and lower second premolar in the cleft area CONCLUSIONS Hypodontia inside and outside the cleft area was frequently observed. This should affect the therapy plans, especially if the cleft-sided premolar is also absent. Further comprehensive research including numerous random samples is necessary for better estimating other possible associations.
Assuntos
Anodontia/diagnóstico por imagem , Fenda Labial/diagnóstico por imagem , Fissura Palatina/diagnóstico por imagem , Adolescente , Anodontia/etiologia , Dente Pré-Molar/anormalidades , Dente Pré-Molar/diagnóstico por imagem , Criança , Pré-Escolar , Feminino , Humanos , Hungria , Incisivo/anormalidades , Incisivo/diagnóstico por imagem , Masculino , Prevalência , Estudos Retrospectivos , Alvéolo Dental/anormalidades , Alvéolo Dental/diagnóstico por imagemRESUMO
The goal for dental students of a university-based program should be to learn about practice procedures in a dental office as part of their studies in order to gain insight into day-to-day activities, such as organizational management, patient communication, and problem-solving strategies. All dental students from the Faculty of Medicine at the University of Dresden in Germany, who completed a one-week internship in an external dental office in the last year before taking the final exam, were invited to participate in the survey (total n = 182 in years 2017-2019 and 2022). After completing the internship, the students were asked to anonymously rate the distinctive competencies they had acquired during their dental studies in terms of clinical and social communication skills. The results of the survey showed a good practicability of the acquired dental knowledge and a general satisfaction of students during their internships. No significant influence of the COVID-19 outbreak and the resulting special regulations in dental practices during the pandemic on student satisfaction was found. Students were more satisfied with their completed internships in smaller cities. Therefore, a stronger inclusion of practices outside the big cities should be considered in the current implementation of the new Dental Licensure Act in Germany.
RESUMO
PURPOSE/OBJECTIVES: More and more creative applications are used in the field of dentistry for clinical practice, patient orientation, teaching, and learning, in order to awake the students' interest and to enable a deep learning and its retention. The aim of this study was to demonstrate the impact and the effectiveness of the current simulation laboratories on the practical dental education. For this purpose, a survey on a new developed "AR-Demonstrator-App" was conducted during the orthodontic technical courses in 2017, 2018, and 2020 in the Department of Orthodontics (C.G. Carus, TU Dresden, Germany). METHODS: With this application, the students had the opportunity to see every single step with instructions on how to manufacture a removable orthodontic device in a compulsory technical course. At the end of these courses, the students were asked to anonymously fill out a printed questionnaire with 12 questions regarding the learning progress related to the app. RESULTS: The yearly mean Likert scores and their bootstrapped 95% confidence intervals as well as the yearly median Likert scores suggest a very positive feedback about the use of the new application as an educational instrument. Despite the recognized predominant benefits of this app, the students concluded that they do not prefer the total replacement of the physical plaster casts and that a combination of conventional and computer-based education provided the optimum approach to acquisition of dental practical skills. CONCLUSIONS: This survey indicates a generally positive attitude toward computer-assisted simulation systems, providing the facility for acquisition of knowledge and practical skills in a multimedia environment.
Assuntos
Aplicativos Móveis , Atitude , Tecnologia Digital , Educação em Odontologia , Humanos , Estudantes , Inquéritos e QuestionáriosRESUMO
BACKGROUND: Severe craniofacial and dental abnormalities, typical for patients with progressive Duchenne muscular dystrophy (DMD), are an exellcent demonstration of Melvin L. Moss "functional matrix theory", highlighting the influence of muscle tissue on craniofacial growth and morphology. However, the currently best approved animal model for investigation of this interplay is the mdx-mouse, which offers only a limited time window for research, due to the ability of muscle regeneration, in contrast to the human course of the disease. The aim of this study was to evaluate craniofacial morphology after BTX-A induced muscle paralysis in C57Bl- and mdx-mice, to prove the suitability of BTX-A intervention to inhibit muscle regeneration in mdx-mice and thus, mimicking the human course of the DMD disease. METHODS: Paralysis of the right masseter muscle was induced in 100 days old C57Bl- and mdx-mice by a single specific intramuscular BTX-A injection. Mice skulls were obtained at 21 days and 42 days after BTX-A injection and 3D radiological evaluation was performed in order to measure various craniofacial dimensions in the sagittal, transversal and vertical plane. Statstical analysis were performed using SigmaStat®Version 3.5. In case of normal distribution, unpaired t-test and otherwise the Mann-Whitney-U test was applied. A statistical significance was given in case of pâ¯≤â¯0.05. RESULTS: In contrast to C57Bl-mice, in mdx-mice, three weeks after BTX-A treatment a significant decrease of skull dimensions was noted in most of the measurements followed by a significant increase at the second investigation period. CONCLUSIONS: BTX-A can induce changes in craniofacial morphology and presumably partially inhibit muscle regeneration in mdx-mice, but cannot completely intensify craniofacial effects elicited by dystrophy. Further research is necessary in order to fully understand muscle-bone interplay after BTX-A injection into dystrophic muscles.
Assuntos
Toxinas Botulínicas Tipo A , Distrofia Muscular de Duchenne , Animais , Modelos Animais de Doenças , Distrofina , Humanos , Músculo Masseter , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Endogâmicos mdx , Músculo Esquelético , Distrofia Muscular de Duchenne/tratamento farmacológicoRESUMO
Customized osteosynthesis materials of titanium alloy can be generated by additive manufacturing replacing the complex adaptation to the patient individual anatomy, especially to the lower jaw bone which shows a highly individual surface area. After printing further conditioning is necessary to adjust surface roughness. The aim of the present study was to analyse the effect of different grinding and polishing procedures on sample surface and composition and in vitro biocompatibility. Ti-6Al-4V ELI samples printed by laser powder bed fusion (LPBF) were post-treated by multi-level procedures to adjust surface roughness using the surface conditioning technologies sandblasting, vibratory finishing, electro polishing or plasma polishing. Topography and chemical composition of the surfaces was analysed. Furthermore, the release of metal ions in contact to cell culture medium was quantified. Human osteoblasts as well as primary human gingiva cells (fibroblasts and epithelial cells) were cultivated in extracts or directly on the surfaces to analyse cytotoxicity, cell adhesion and cell proliferation. Surface roughness of the different materials after final polishing was in between 0.2 and 0.5 µm, which is in the same range as usually found for conventional titanium materials used in maxillofacial surgery. Furthermore, the wettability was comparable for all post-processing techniques. The chemical compositions of the finished surfaces showed a remarkable impact by the applied finishing technique. Extracts of the samples showed low cytotoxicity with exception of the plasma polished samples, which were shown to release significantly higher amounts of vanadium ions. Accordingly, cells showed good adhesion and proliferation on all samples except plasma polished specimens. Customized devices for midline osseodistraction were exemplarily printed with LPBF starting with patient's 3D data. Those devices can be considered for clinical use, since the printed and finished material meets the requirements of ISO 10993-5 for medical devices.
Assuntos
Próteses e Implantes , Titânio , Ligas , Humanos , Teste de Materiais , Osteoblastos , Propriedades de Superfície , Titânio/farmacologiaRESUMO
OBJECTIVE/BACKGROUND: The most frequently used animal model for human DMD (Duchenne muscular dystrophy) research is the mdx mouse. In both species, characteristic histological changes like inflammation, muscle fiber degeneration and fibrosis are the same, but in contrast to humans, in mdx mice, phases of muscle fiber degeneration are compensated by regeneration processes. AIM: Therefore, the interest of this study was to evaluate histological features in masticatory muscles after BTX-A injection into the right masseter muscle of wild type and dystrophic (mdx) mice, illustrating de- and regeneration processes induced by this substance. MATERIAL AND METHODS: The right masseter muscle of 100 days old healthy and mdx mice were selectively paralyzed by a single intramuscular BTX-A injection. Masseter as well as temporal muscle of injection and non-injection side were carefully dissected 21 days and 42 days after injection, respectively, and fiber diameter, cell nuclei position, necrosis and collagen content were analyzed histomorphologically in order to evaluate de- and regeneration processes in these muscles. Statistical analysis was performed using SigmaStat Software and Mann Whitney U-test (significance level: p < 0.05). RESULTS: At both investigation periods and in both mouse strains fiber diameter was significantly reduced and collagen content was significantly increased in the right injected masseter muscle whereas fiber diameters in mdx mice were much smaller, and these differences were even more apparent at the second investigation period. Necrosis and central located nuclei could generally be found in all mdx mice muscles investigated with an amount of centronucleation exceeding 60%, and a significant increase of necrosis six weeks after injection. In wild type mice central located nuclei could primarily be found in the treated masseter muscle with a portion of 2.7%, and this portion decreased after six weeks, whereas in mdx mice a decrease could also be seen in the non-injected muscles. In contrast, in wild type mice necrosis was not apparent at any time and in all muscles investigated. CONCLUSION: From our results it can be concluded that in mdx mice masticatory muscles de- and regeneration processes were extended, triggered by a selective BTX-A injection, or mdx mice at this age, independently of BTX-A treatment, went through another cycle of de- and regeneration as a characteristic of this disease.
Assuntos
Toxinas Botulínicas Tipo A/farmacologia , Distrofina/deficiência , Músculo Masseter/anatomia & histologia , Distrofia Muscular de Duchenne/patologia , Animais , Toxinas Botulínicas Tipo A/administração & dosagem , Colágeno/análise , Modelos Animais de Doenças , Feminino , Processamento de Imagem Assistida por Computador , Injeções Intramusculares , Masculino , Músculo Masseter/química , Músculo Masseter/efeitos dos fármacos , Músculo Masseter/patologia , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Endogâmicos mdx , Fatores de TempoRESUMO
BACKGROUND: The mdx mouse, the most approved animal model for basic research in Duchenne muscular dystrophy (DMD), has the ability to compensate muscle degeneration by regeneration process, which is obvious at approx. 3 months of age. Hence, this mouse model is only temporarily suitable to proof craniofacial changes which are usually evident in humans with the progression of the disease. OBJECTIVES: The purpose of our study was to examine the impact of botulinum toxin A (BTX-A) in influencing muscle regeneration in the masticatory muscles of healthy and mdx mice. MATERIAL AND METHODS: Chemo-denervation of the right masseter muscle was induced in 100-day-old, healthy and dystrophic mice by a specific intramuscular BTX-A injection. Gene expression and protein content of myogenic regulatory factors and muscle growth factor (MyoD1, myogenin and myostatin) in the right and left masseter, temporal and the tongue muscle were determined 4 and 21 days after injection, respectively, using quantitative reverse transcription polymerase chain reaction (qRT-PCR) and western blot technique. RESULTS: The 4 day and 21 day interval proved significant but varying changes of mRNA expression in both control and mdx mice. At the protein level, myogenin expression was increased in the temporal and masseter muscle on the injection side in controls, whereas dystrophic mice showed the same effect for MyoD1 expression. Additionally, increased protein expression of all studied genes could be found in dystrophic mice compared to controls, except the left temporal and the tongue muscle. CONCLUSIONS: Muscle regeneration is not constant in BTX-A injected mdx masticatory muscles, presumably due to the already exhausted capacity or functional loss of satellite cells caused by dystrophin deficiency, and, therefore, disturbed regeneration potential of myofibrils. Botulinum toxin A injection cannot fully break down regulatory processes at molecular level in 100-day-old mdx mice. Further investigations are necessary to fully understand the regeneration process following BTX-A injection into dystrophic muscles.
Assuntos
Toxinas Botulínicas/administração & dosagem , Distrofina/deficiência , Músculo Esquelético/efeitos dos fármacos , Músculo Esquelético/metabolismo , Distrofia Muscular Animal/metabolismo , Proteína MyoD/metabolismo , Miogenina/metabolismo , Animais , Western Blotting , Modelos Animais de Doenças , Distrofina/genética , Distrofina/metabolismo , Humanos , Músculo Masseter , Camundongos , Camundongos Endogâmicos mdx , Distrofia Muscular Animal/patologia , Proteína MyoD/genética , Fatores de Regulação Miogênica , Miogenina/genética , Miostatina/genética , Miostatina/metabolismo , Regeneração , Reação em Cadeia da Polimerase Via Transcriptase ReversaRESUMO
The authors present the contemporary state of knowledge concerning alternative materials for dental implantology. First of all, factors influencing osseointegration are stated. The most important factors seem to be the type of implant surface. Among the numerous parameters describing them, the most important are: average roughness and porous density. Some studies proved that materials with comparable surface roughness provide similar osseointegration. In modern implantology titanium is the material still considered as a "gold standard". However, aesthetic features of titanium still bear several disadvantages, especially in the case of periodontium with a thin biotype in the anterior, aesthetic sensitive area of the jaw. If a titanium implant is used in such a case, the mucosa at the implant's neck may become grayish and, consequently limits the success of the overall treatment. That was the reason for seeking alternative materials to manufacture dental implants. Initiated by general medicine, mainly orthopedics, the search led to the discovery of zirconium dioxide used in dental implantology. A small number of complications, good chemical parameters, anticorrosion, mechanical strength, elasticity module close to the one of steel, and especially biocompatibility made zirconium a perfect material for this purpose, although this material presents several problems in achieving optimal roughness. In this overview one of the probable methods, a process of partial synterization, is presented.
Assuntos
Materiais Dentários/uso terapêutico , Osseointegração/efeitos dos fármacos , Zircônio/uso terapêutico , Implantes Dentários , Humanos , Propriedades de Superfície , Titânio/uso terapêuticoRESUMO
The objective of the present study was to compare the primary and secondary stability of tissue-level short dental titanium implants with polished necks and hydrophilic surfaces of two different designs and manufacturers. The first implant system used (SPI®ELEMENT RC INICELL titanium implants, Thommen Medical AG, Grenchen, Switzerland), allowed functional loading 6 weeks after its placement, whereas the second implant system (RN SLActiv® tissue-level titanium implants, Straumann GmbH, Fribourg, Germany), was loaded after 15 weeks. The degree of primary and secondary stability was determined using an Osstell ISQ measuring device. Marginal bone loss (MBL) was evaluated radiographically 12 and 24 weeks after implantation and the Wachtel's healing index as well as the patient's satisfaction with the treatment was registered on a VAS scale. The intergroup comparison revealed significant differences in terms of primary stability as well as differences in MBL 3 months after the procedure, but no significant differences could be found after 6 months and for secondary stability. The primary stability was significantly higher for Thommen® compared to Straumann® implants. Insertion of short dental implants with a hydrophilic conditioned surface significantly shortens patient treatment time.
Assuntos
Implantes Dentários/normas , Mandíbula/cirurgia , Adulto , Perda do Osso Alveolar/etiologia , Antibacterianos/administração & dosagem , Fármacos Cardiovasculares/administração & dosagem , Clindamicina/administração & dosagem , Implantes Dentários/classificação , Escina/administração & dosagem , Humanos , Interações Hidrofóbicas e Hidrofílicas , Doenças Mandibulares/etiologia , Satisfação do Paciente , Cuidados Pós-Operatórios/métodos , Radiografia Dentária , Ferida Cirúrgica/fisiopatologia , Titânio , CicatrizaçãoRESUMO
AIM: The aim of this study was a comparison of shear bond strength (SBS) on tooth enamel of different primers combined with the adhesive paste Transbond XT. MATERIALS AND METHODS: Forty bovine teeth were used in order to create 40 test blocks. The blocks were divided into four groups of 10 blocks each: group A - sample primer (SP); group B - Opal Seal (OS); group C - Transbond Plus SEP (TSEP); group D - Transbond XT Primer (TXT). After surface preparation and application of the primer, respectively, two stainless steel brackets were fixed on each tooth by using Transbond XT. Accordingly, 80 brackets were debonded (n=20). Shear bond strength and adhesive remnant index (ARI) scores were evaluated. Statistical analyses were performed by using the Student's t-test and Mann-Whitney U test. RESULTS: All tested groups revealed high shear bond strength in a similar size range. There were no significant differences between the groups concerning shear bond strength. The ARI scores of group C showed significantly lower ARI scores (0 and 1) than that of group D. Apart from that there was no statistical difference. CONCLUSION: In combination with the adhesive paste Transbond XT, all tested primers were suitable for fixing orthodontic brackets. The primers could be changed according to the clinical situation.
Assuntos
Bis-Fenol A-Glicidil Metacrilato/química , Cimentos Dentários/química , Esmalte Dentário/química , Esmalte Dentário/fisiologia , Análise do Estresse Dentário/métodos , Pomadas/química , Braquetes Ortodônticos/normas , Cimentos de Resina/metabolismo , Resistência ao Cisalhamento , Animais , Bis-Fenol A-Glicidil Metacrilato/farmacologia , Bovinos , Cimentos Dentários/metabolismo , Humanos , Teste de Materiais , Pomadas/farmacologiaRESUMO
Short dental implants can be an alternative method of treatment to a vertical bone augmentation procedure at sites of reduced alveolar height. However, for successful treatment, an implant system that causes a minimal marginal bone loss (MBL) should be taken into consideration. The aim of the study has been to evaluate implantation effectiveness for bone level and tissue level short implants provided in lateral aspects of partially edentulous mandible and limited alveolar ridge height. The MBL and primary as well as secondary implant stability were determined in the study. Patients were randomly divided into two groups according to the method of treatment provided. Sixteen short Bone Level Implants (OsseoSpeed TX, Astra tech) and 16 short Tissue Level Implants (RN SLActive®, Straumann) were successfully placed in the edentulous part of the mandible. The determination of the marginal bone level was based on radiographic evaluation after 12 and 36 weeks. Implant stability was measured immediately after insertion and after 12 weeks. The marginal bone level of Bone Level Implants was significantly lower compared to Tissue Level Implants. Furthermore, the Bone Level Implants had greater primary and secondary stability in comparison with Tissue Level Implants (Primary: 77.8 ISQ versus 66.5 ISQ; Secondary: 78.9 ISQ versus 73.9 ISQ, respectively). Since short Bone Level Implants showed a significantly decreased MBL 12 and 36 weeks after implantation as well as better results for the primary stability compared to Tissue Level Implants, they should preferentially be used for this mentioned indication.
Assuntos
Implantes Dentários , Arcada Parcialmente Edêntula/cirurgia , Mandíbula/cirurgia , Adulto , Perda do Osso Alveolar/prevenção & controle , Processo Alveolar , Aumento do Rebordo Alveolar , Implantação Dentária Endóssea , Planejamento de Prótese Dentária , Prótese Dentária Fixada por Implante , Feminino , Humanos , Masculino , Mandíbula/diagnóstico por imagem , Pessoa de Meia-Idade , Osseointegração , Resultado do Tratamento , Adulto JovemRESUMO
Many inserted implants are affected by peri-implantitis. The aim of our study was to evaluate increases in implant temperature, depending on the diameter and chemical composition of implants. In particular we measured the time it takes for the temperature of an implant to rise by 10°C and evaluated laser power settings required to prevent thermal injury when an implant surface is decontaminated during the treatment of peri-implantitis. The study analysed six implants placed in porcine ribs and divided into two groups according to their diameter and chemical composition (grade IV and grade V titanium). The implants were irradiated with Diode and Er:YAG lasers using different laser parameters. The temperature was measured with a K-type thermocouple. The temperature on the implant surface rose as the laser power increased and the implant diameter decreased. The time required to increase the temperature of an implant by 10°C was less than it was for titanium grade IV. The temperature gradient was below 10°C for all implants treated using a laser power up to 1 W. It is important to choose the correct laser parameters, depending on the chemical composition and diameter of the implant, so that decontamination of the implant surface is thorough, effective and safe.
Assuntos
Osso e Ossos/fisiologia , Lasers Semicondutores , Titânio/química , Osso e Ossos/química , Lasers de Estado Sólido , Próteses e Implantes/normas , TermodinâmicaRESUMO
BACKGROUND: Due to the similarity of keratinized gingival and palatal mucosa the latter can pose as a potential donor site for gingival recession coverage. However, its availability is restricted and a thin transplant bears the risk of being rejected. The aim of the present study was to compare the clinical and histological results of thin palatal mucosa augmentation, using lyophilized Biokol® xenogenous collagen sponge and a suspension of xenogenous Gel 0® pure collagen with non-augmented tissue from the same patients. MATERIALS AND METHODS: Ten patients simultaneously underwent bilateral augmentation procedures using Biokol® and Gel 0® collagen material. The donor sites were augmented 8 weeks prior to the harvesting of the connective tissue graft (CTG) for the gingival recession coverage procedures. Prior to the implantation of the collagen material and during the course of harvesting the augmented CTG, tissue specimens were taken for histological examination. Prior to the commencement of the study and after it, the parameters of palatal gingival thickness at 4mm (PGT1), and at 8mm apical to the gingival margin (PGT2) around the teeth neighboring the operating fields were determined. RESULTS: In both groups the palatal mucosa had thickened significantly in both measuring sites. An intergroup comparison revealed greater thickening of the masticatory mucosa in the Biokol® group at both measuring points. The histological image of the grafts, obtained from sites augmented using both test methods, revealed a typical pattern of mature fibrous connective tissue. No epithelial cells were found. CONCLUSION: Augmentation of thin masticatory mucosa using Biokol® or Gel 0® collagen materials resulted in a significant thickening of the mucosa, which could be demonstrated to be greater in the first group.
Assuntos
Aumento do Rebordo Alveolar/métodos , Colágeno/uso terapêutico , Tecido Conjuntivo/transplante , Retração Gengival/patologia , Retração Gengival/cirurgia , Mucosa Bucal/patologia , Mucosa Bucal/cirurgia , Implantes Absorvíveis , Adulto , Processo Alveolar/patologia , Processo Alveolar/cirurgia , Tecido Conjuntivo/patologia , Estudos de Viabilidade , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Palato Duro/patologia , Palato Duro/cirurgia , Resultado do Tratamento , Adulto JovemRESUMO
BACKGROUND: Autogenous connective tissue graft (CTG) that can be safely harvested from the palatal mucosa is limited. Often a multi-stage surgical procedure is needed to cover multiple gingival recessions (MGR). To address this problem, efforts are being made to explore substitutes suitable in size to ensure surgical treatment in a single visit.The objective of the present study was the histological evaluation of tissue in the recipient site after augmentation with a hydrated biostatic Fascia Lata Allograft (FLA) in conjunction with MGR coverage at different healing stages. MATERIAL AND METHODS: Twelve patients needing bilateral multiple gingival recession coverage participated in this study. On the test side, the tunnel technique with FLA was used, while CTG, harvested from the palatal mucosa, was used to cover MGR on the control side. Histological assessment was performed 3, 6, 9 and 12 months after augmentation. RESULTS: FLA was well tolerated by the host tissue. During all investigation periods histological images of all patients in the test side revealed a slow process of incorporation of the material grafted in the host connective tissue, showing a colonization of the graft with host fibroblasts and formation of new blood vessels. After 12 months, the graft had fully remodeled into connective tissue of the host gingiva. CONCLUSION: Apart from the limitations of the present study, we conclude that the FLA may serve as a substitute for autogenous CTG harvested from the palatal mucosa and can be applied as a technique for covering MGR in a single visit.
Assuntos
Fascia Lata/transplante , Retração Gengival/terapia , Adulto , Biópsia , Tecido Conjuntivo/transplante , Feminino , Fibroblastos , Seguimentos , Retração Gengival/patologia , Humanos , Masculino , Pessoa de Meia-Idade , Mucosa Bucal/transplante , Palato , Resultado do TratamentoRESUMO
Cephalometric analysis, including both basic cranio- and gnathometric measurements and detailed evaluation of the construction of skeletal, muscular and mucosal systems combined with estimation of the risk of recession's occurrence, can be used to determine the direction of therapy and ensure appropriate aesthetic-functional effects of treatment. The objective of the present study was to compare the influence of the chosen morphologic parameters on the development of gingival recession in the front part of the jaw in patients with Angle class III. The research material was based on the medical documentation of 1800 patients. Sixty generally healthy patients qualified for the research with prognathism. On the basis of the side-head cephalograms, measurements were carried out to describe the bone structure in the front section of the lower jaw. The lower incisor teeth set-up was also analyzed. Gum recession of the lower incisor teeth was assessed on the basis of the inside-mouth photos of the patients with class III malocclusion. The occurrence of recession in a further 4 patients resulted from such a positioning of the lower teeth. In patients in the first group, treated with complex ortho-surgical treatment, the lower incisor teeth were adjusted much more vertically in the alveola and, thus, recession occurred only in one patient. Complex orthodontic-surgical therapy contributes to recession development to a lesser degree than the sham treatment and makes it a safe alternative therapy in patients with high diathesis for occurrence or progression of an existing recession.
Assuntos
Retração Gengival/etiologia , Retração Gengival/patologia , Incisivo/patologia , Má Oclusão Classe III de Angle/complicações , Má Oclusão Classe III de Angle/patologia , Mandíbula/patologia , Adolescente , Adulto , Cefalometria , Feminino , Humanos , Incisivo/anormalidades , Masculino , Pessoa de Meia-Idade , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Adulto JovemRESUMO
The most widespread animal model to investigate Duchenne muscular dystrophy is the mdx-mouse. In contrast to humans, phases of muscle degeneration are replaced by regeneration processes; hence there is only a restricted time slot for research. The aim of the study was to investigate if an intramuscular injection of BTX-A is able to break down muscle regeneration and has direct implications on the gene expression of myosin heavy chains in the corresponding treated and untreated muscles. Therefore, paralysis of the right masseter muscle was induced in adult healthy and dystrophic mice by a specific intramuscular injection of BTX-A. After 21 days the mRNA expression and protein content of MyHC isoforms of the right and left masseter, temporal, and the tongue muscle were determined using quantitative RT-PCR and Western blot technique. MyHC-IIa and MyHC-I-mRNA expression significantly increased in the paralyzed masseter muscle of control-mice, whereas MyHC-IIb and MyHC-IIx/d-mRNA were decreased. In dystrophic muscles no effect of BTX-A could be detected at the level of MyHC. This study suggests that BTX-A injection is a suitable method to simulate DMD-pathogenesis in healthy mice but further investigations are necessary to fully analyse the BTX-A effect and to generate sustained muscular atrophy in mdx-mice.
RESUMO
The method for covering gingival recession defects and augmenting keratinized gingiva involves the use of autogenuous connective tissue grafts obtained from palatal mucosa in combination with various techniques of flap repositioning or tunnel techniques. In the case of multiple gingival recession defects the amount of connective tissue available for grafting is insufficient. Therefore, the use of substitutes is necessary. The most widely used material in recent years has been the acellular dermal matrix allograft. The disadvantage of its application lies in the absence of cells and blood vessels, which increases incorporation time. Primary cultured human autologic fibroblasts are commonly used to optimize the healing process. The aim of this study was to examine the in vitro biocompatibility of human fascia lata allograft as a new scaffold for primary cultured human autologic fibroblasts. For that, a fibroblast culture obtained from a fragment of gingival tissue taken from the hard palate mucosa of a subject was used. After 14 days the colony cells were inoculated on a fragment of human fascia lata allograft. After a further 7 days of incubation the material was frozen, cut and prepared for histochemical examination. After two weeks of incubation, and 7 days after inoculation on a fragment of fascia lata allograft numerous accumulations of the cultured fibroblast were found that had a typical structure and produced collagen fibres. A human fascia lata allograft can be used as a scaffold for primary cultured human autologic fibroblasts. Further studies should confirm the clinical efficacy of this solution.
Assuntos
Aloenxertos/transplante , Fascia Lata/transplante , Fibroblastos/transplante , Alicerces Teciduais , Células Cultivadas , Gengiva/citologia , Retração Gengival/cirurgia , Humanos , Queratinócitos , Mucosa Bucal/citologia , Palato Duro/citologia , Cultura Primária de Células , Coxa da PernaRESUMO
Bone density and quantity are primary conditions for the insertion and stability of dental implants. In cases of a lack of adequate maxillary or mandibulary bone, bone augmentation will be necessary. The use of synthetic bioactive bone substitution materials is of increasing importance as alternatives to autogenously bone grafts. It is well known that bone can influence muscle function and muscle function can influence bone structures. Muscles have a considerable potential of adaptation and muscle tissue surrounding an inserted implant or bone surrogate can integrate changes in mechanical load of the muscle and hereupon induce signaling cascades with protein synthesis and arrangement of the cytoskeleton. The Musculus latissimus dorsi is very often used for the analyses of the in vivo biocompatibility of newly designed biomaterials. Beside macroscopically and histologically examination, biocompatibility can be assessed by analyses of the biomaterial influence of gene expression. This review discusses changes in the fiber type distribution, myosin heavy chain isoform composition, histological appearance and vascularization of the skeletal muscle after implantation of bone substitution materials. Especially, the effects of bone surrogates should be described at the molecular-biological and cellular level.
Assuntos
Substitutos Ósseos , Músculo Esquelético/fisiologia , Materiais Biocompatíveis , Coristoma/patologia , Humanos , Peptídeos e Proteínas de Sinalização Intercelular/biossíntese , Teste de Materiais , Próteses e Implantes , Miosinas de Músculo Esquelético/biossínteseRESUMO
Reduced vertical bone level in the implantation area is often considered one of the limiting factors before implant insertion. Inserting implants of reduced length might be useful in order to avoid vertical bone augmentation prior to implantation. To the present day, no official guidelines exist as to the optimal length for these implants. It is nevertheless well known that the stability of an implant depends primarily on its osseointegration, which could otherwise be influenced by modifying implant surface texture. The aim of our study was to evaluate osseointegration in correlation with implant length and surface texture. Three different variations of titan implants (n=5) were compared: two types, each with an acid-etched and ceramic blasted surface, were inserted in the upper jaw of adult female minipigs at different lengths (tioLogic ST Shorty, 5mm length; tioLogic ST, 9mm length) and were compared to a control group (tioLogic ST, 9mm length, ceramic blasted surface). Eight weeks after unloaded healing, bone tissue specimens containing the implants were processed, stained with Masson-Goldner-trichrome and analyzed histologically. Regardless of implant length and surface texture, new bone formation with no signs of inflammation could be detected in the area of the threads. Implants with a modified surface showed no statistically significant difference in bone-implant-contact (BIC) (tioLogic ST Shorty, 56.5%; tioLogic(©)ST; 77.2%), but a statistically significant difference could be found, when the 9mm implants were compared to the control group (BIC 48.9%). Surface modification could positively influence osseointegration as well as contribute to overcoming the adverse effects of length reduction.