Perioperative Management of Antithrombotic Therapy in Patients Who Undergo Dental Procedures: A Systematic Review of the Literature and Network Meta-Analysis.

BACKGROUND: The surgical dental treatment of subjects admitted for anticoagulants therapy represents a consistent risk for peri-operative bleeding. The aim of the present study was to investigate the clinical findings of dental surgery operative management of the patients under anticoagulants drugs protocol. METHODS: The literature screening was performed using Pubmed/Medline, EMBASE and Cochrane library, considering only randomized clinical trials (RCTs) papers. No limitations about the publication's period, follow-up time or clinical parameters were considered. RESULTS: A total of eight RCTs were included for the qualitative synthesis. No thromboembolic complications were reported in any studies. Several bleeding episodes associated with anticoagulant drugs in dental surgery were mild and generally happened on the first day after the treatment. CONCLUSIONS: The use of local haemostatic measures is generally effective for bleeding control with no further pharmacological drug management or suspension.

Implant Periapical Lesion: Clinical and Histological Analysis of Two Case Reports Carried Out with Two Different Approaches.

Periapical implantitis (IPL) is an increasingly frequent complication of dental implants. The causes of this condition are not yet entirely clear, although a bacterial component is certainly part of the etiology. In this case series study, two approaches will be described: because of persistent IPL symptoms, a patient had the implant removed and underwent histological analysis after week 6 from implantation. The histomorphometric examination revealed a 35% bone-implant contact area involving the coronal two-thirds of the implant. The apical portion of the fixture on the other hand was affected by an inflammatory process detectable on radiography as a radiolucent area. The presence of a probable root fragment, detectable as an imprecise radiopaque mass in the zone where the implant was later placed, confirms the probable bacterial etiology of this case of IPL. On the other hand, in case number 2, the presence of IPL around the fixture was solved by surgically removing the implant apical third as well as the adjacent tooth apex. It may be concluded from our histological examination that removal of the apical portion of the fixture should be considered an effective treatment for IPL since the remaining implant segment remains optimally osseointegrated and capable of continuing its function as a prosthetic abutment. Careful attention, however, is required at the implantation planning stage to identify in advance any sources of infection in the edentulous area of interest which might compromise the final outcome.

Application of Tribology Concept in Dental Composites Field: A Scoping Review.

Tribology is the discipline concerning the application of friction, lubrication, and wear concepts of interacting surfaces in relative motion. A growing interest has developed in tribology application in medical biomaterials, such as resin composites used in restorative dentistry. Yet, the keywords "tribology" and "biotribology" are little applied in the pertinent publications. The aim of this scoping review was to offer an overview of tribology application in dental composites research and to identify knowledge gaps and address future research. A literature search was conducted on Pubmed and Scopus databases and the studies investigating the tribological behavior of resin composites were included for qualitative synthesis. The majority of studies on dental tribology were published in the research areas of mechanical engineering/nanotechnology and differed in several methodological aspects. The preponderant engineering approach and the lack of standardized testing make the laboratory findings poorly informative for clinicians. Future research should focus on the tribological behavior of dental materials composites by means of an integrated approach, i.e., engineering and clinical, for improving development and advancement in this field of research.

In Vitro Qualitative Evaluation of Root-End Preparation Performed by Piezoelectric Instruments.

Although the application of ultrasounds in endodontic surgery allows for effective debridement of the root canal, incorrect device setting or inefficient tips seem to generate cracks during root-end retropreparation. The primary aim of this in vitro study was to establish the presence, or absence, of a correlation between ultrasonic root-end preparation and the formation of cracks. The present study was conducted on human teeth, extracted for periodontal reasons. After root canal treatment, roots were resected 3 mm from the anatomical apex by using a high-speed handpiece and carbide burs. The resected teeth were retroprepared by using an ultrasonic tip (R1D, Piezomed, W&H, Bürmoos, Austria), setting the piezoelectric device at maximum power available for the tip. Time required for the retropreparation was recorded. Before and after retropreparation, all roots were photographed under a stereomicroscope and analyzed by two different operators to evaluate: (a) the presence and extension of dentinal cracks and (b) the morphology of root-end preparation. Finally, piezoelectric tips were analyzed by scanning electron microscopy (SEM) to evaluate morphologic changes after use. A total of 43 single roots (33 with one root canal, 10 with two root canals) were treated. Average preparation time was 1 minute and 54 seconds. None of the roots without initial cracks developed new cracks after retropreparation. Quality of the preparation margins was fairly equal among the prepared specimens. None of the piezoelectric tips broke during instrumentation, and SEM analysis showed minimal surface wear of the tips after performing 11 retropreparations. Within the limits of the present study, the tested piezoelectric system does not seem to represent a major cause for root crack formation. Pre-existing cracks may expand after ultrasound root-end preparation.

Maxillary Premolars with Four Canals: Case Series.

The aim of this case series is to contribute to the better knowledge and management of the complex anatomical configurations of maxillary premolars with four canals. The paper explains the endodontic treatment of five maxillary premolars with four canals, with three buccal and one palatal orifices, in different patients. The cases report several approaches in the treatment of four-canal maxillary premolars including a conservative canal preparation with a hybrid shaping technique, endodontic microsurgery and the application of biomaterials. The use of an operating dental microscope, different operating strategies and the critical evaluation of radiographs are all necessary steps for the correct and safe endodontic management of these teeth.

Autologous Platelet Gel (APG): A Preliminary Evaluation of the Mechanical Properties after Activation with Autologous Thrombin and Calcium Chloride.

The tensional and mechanical behavior of regenerative components, grafts, and blood clots represent an essential condition for the success of bone regeneration protocols. Autologous platelet growth factors represent a useful protocol to enhance the soft and hard tissue healing in several fields of medicine and craniofacial surgery. Different protocols for blood concentrates with and without activation have been proposed in literature. The aim of the present study was to investigate in vitro the mechanical properties of autologous platelet gel (APG) with autologous thrombin and calcium chloride. MATERIALS AND METHODS: A total of 20 APG samples were evaluated; 10 samples were activated by autologous thrombin and calcium chloride (Group I) and 10 samples were non-activated (Group II). The tensile strength and modulus of elasticity were calculated through a static loading test (Lloyd 30 K, Lloyd Instruments Ltd., Segensworth, UK). RESULTS: Group I (activated) reported a tensile strength of 373.5 ± 14.3 MPa, while Group II showed a significantly lower value of 360.5 ± 16.3 MPa (p < 0.05). The Young's modulus was 145.3 ± 10.4 MPa for Group I and 140.3 ± 15.3 MPa for Group II (p < 0.05). CONCLUSIONS: The effectiveness of the present in vitro simulation showed that the APG activation protocol is able to increase the mechanical characteristics of the blood derivates and could be clinically useful to enhance regenerative procedures.

Evaluation of the Cyclic Fatigue of Two Single Files at Body and Room Temperature with Different Radii of Curvature.

Background: To compare the influence of different temperatures and curvature radii on the cyclic fatigue resistance of F6 SkyTaper (F6ST) and One Curve (OC) single file nickel-titanium rotary instruments. Methods: A total of 120 instruments of F6ST and OC #25.06 were evaluated in 5 mm and 3 mm curvature radii at two temperatures (20 °C ± 1 °C and 37 °C ± 1 °C) in 16 mm stainless steel artificial canals associated with a curvature of 60°. The cyclic fatigue of tested files was assessed by employing a customized testing apparatus and expressed as times to fracture (TtF). A statistical analysis was performed with the significance level set at 95%. Results: All instruments decreased their TtF at 37 °C except for OC in the 3 mm radius, in which no significant difference was detected between 20 °C and 37 °C. A 3 mm curvature radius negatively affected TtF of all tested instruments, except for F6ST at 20 °C. F6ST had higher TtF than OC in the 3 mm radius at 20 °C, with no significant difference between them in the other tested conditions. Conclusions: Under the limits of the present in vitro study, body temperature impaired cyclic fatigue resistance of all files, except for OC in the 3 mm curvature radius. All instruments exhibited lower times to fracture in the 3 mm radius, excluding F6ST at 20 °C.

Graftless Maxillary Sinus Floor Augmentation with Simultaneous Porcine Bone Layer Insertion: A 1- to 5-Year Follow-up Study.

PURPOSE: Evidence suggests that maxillary sinus floor augmentation via a lateral approach can be performed without positioning a bone graft inside, when one or more implants can be placed simultaneously. The aim of this study was to test if the placement of a porcine cortical bone layer underneath the sinus membrane can increase bone formation and implant stability. MATERIALS AND METHODS: One hundred seventy-two patients with posterior maxilla atrophy needing implant rehabilitation were selected. Two hundred six sinus augmentation procedures were performed via a lateral approach, and 295 implants were placed in the same session of the sinus elevation surgery. In all the surgeries, a porcine cortical bone layer was placed underneath the sinus membrane, without using any graft material. After 6 to 7 months of healing, the implants were uncovered, then restored with porcelain-fused-to-metal crowns and monitored with a followup of 1 to 5 years. RESULTS: The implant cumulative success rate was 95.2%, while the residual bone crest height changed from 2.67 ± 1.11 mm to 12.54 ± 1.42 mm, with an increase of 9.87 mm on average. Marginal bone resorption was 0.83 mm on average after 1 year of loading, while the mean implant stability measured at the moment of implant placement and 6 to 7 months later increased from an implant stability quotient (ISQ) of 62.61 ± 5.7 to an ISQ of 70.07 ± 8.2. CONCLUSION: This study confirms the validity of the graftless sinus elevation surgery when simultaneous implant placement is performed. The use of a porcine cortical bone layer seems to increase, from a radiologic point of view, the amount of bone around the implants, reducing healing time, cost, and biologic complications for the patient.

Evaluation of peri-implant bone loss around platform-switched implants.

This clinical and radiographic prospective study evaluated bone loss around two-piece implants that were restored according to the platform-switching protocol. One hundred thirty-one implants were consecutively placed in 45 patients following a nonsubmerged surgical protocol. On 75 implants, a healing abutment 1 mm narrower than the implant platform was placed at the time of surgery. On the remaining implants, a healing abutment of the same diameter as the implant was inserted. All implants were positioned at the crestal level. Clinical and radiographic examinations were performed prior to surgery, at the end of surgery, 8 weeks after implant placement, at the time of provisional prosthesis insertion, at the time of definitive prosthesis insertion, and 12 months after loading. The data collected showed that vertical bone loss for the test cases varied between 0.6 mm and 1.2 mm (mean: 0.95 +/- 0.32 mm), while for the control cases, bone loss was between 1.3 mm and 2.1 mm (mean: 1.67 +/- 0.37 mm). These data confirm the important role of the microgap between the implant and abutment in the remodeling of the peri-implant crestal bone. Platform switching seems to reduce peri-implant crestal bone resorption and increase the long-term predictability of implant therapy.

Bone contact around osseointegrated implants: histologic analysis of a dual-acid-etched surface implant in a diabetic patient.

The clinical applicability and predictability of osseointegrated implants in healthy patients have been studied extensively. Although successful treatment of patients with medical conditions including diabetes, arthritis, and cardiovascular disease has been described, insufficient information is available to determine the effects of diabetes on the process of osseointegration. An implant placed and intended to support an overdenture in a 65-year-old diabetic woman was prosthetically unfavorable and was retrieved after 2 months. It was then analyzed histologically. No symptoms of implant failure were detected, and histomorphometric evaluation showed the bone-to-implant contact percentage to be 80%. Osseointegration can be obtained when implants with a dual-acid-etched surface are placed in properly selected diabetic patients.

Immediate Loading of Implant-Supported Single Crowns after Conventional and Ultrasonic Implant Site Preparation: A Multicenter Randomized Controlled Clinical Trial.

AIM: To compare implant survival rate and marginal bone loss (MBL) of immediately loaded single implants inserted by using ultrasonic implant site preparation (UISP) (test) and conventional rotary instrumentation (control). METHODS: Two single implants were inserted for each patient: after randomization, test site was prepared by using an ultrasonic device (Piezosurgery Touch, Mectron, Italy) and control site was prepared by using the drills of the selected implant system (Premium AZT, Sweden & Martina, Italy), until reaching a final diameter of 3 mm in both groups. Identical implants (3.8x11.5 mm) were inserted in all sites at crestal level. Impressions were taken and screwed resin single crowns with platform-switched provisional abutments were delivered with 48 hours. Periapical radiographs were taken at provisional crown insertion (T0), 6 months (T1) and one year (T2) after prosthetic loading to measure MBL. All data were tested for normality and subsequently analyzed by paired samples t-test and forward multiple linear regression. RESULTS: Forty-eight patients were treated in six centers with the insertion of ninety-six implants (48 test; 48 control). Four implants in four patients failed within the first six months of healing (two in test group; two in control group; no difference between groups). Forty patients (age 60.1±10.7 years; 22 female, 18 male) were included in the final analysis. Mean MBL after six months of loading was 1.39±1.03 mm in the test group and 1.42±1.16 mm in the control group (p>0.05) and after one year was 1.92±1.14 mm and 2.14±1.55 mm in test and control, respectively (p>0.05). CONCLUSIONS: No differences in survival rate and MBL were demonstrated between UISP and conventional site preparation with rotary instruments in immediately loaded dental implants: UISP, with its characteristics of enhanced surgical control and safety in proximity of delicate structures, may be used as a reliable alternative to the traditional drilling systems.

Complex Apical Intraradicular Infection and Extraradicular Mineralized Biofilms as the Cause of Wet Canals and Treatment Failure: Report of 2 Cases.

This article describes 2 cases that showed persistent intracanal exudation (wet canal) even after several visits of antimicrobial endodontic treatment. Histologic and histobacteriologic investigation was conducted for determination of the cause. The 2 cases involved teeth with apical periodontitis lesions, which presented persistent exudation refractory to treatment after several visits. In case 1, it was not possible to achieve a dry canal, and surgery had to be performed. In case 2, attempts to dry the canal succeeded and the canal was filled, but follow-up examination showed an enlarged apical periodontitis lesion and extraction was performed. Biopsy specimens consisting of the root apex and apical periodontitis lesion for case 1 and the whole root for case 2 were subjected to histologic and histobacteriologic analyses. Both cases showed complex bacterial infection in the apical root, affecting both the intraradicular space and the outer root surface. Case 1 showed bacterial biofilms in ramifications, on untouched walls, and extending to the external root surface to form a thick and partially mineralized structure with high bacterial density. Different bacterial morphotypes were evidenced. Case 2 had a ledge on the apical canal wall created during instrumentation, which was filled with necrotic debris, filling material, and bacteria. The walls of the apical portion of the canal were covered by a bacterial biofilm, which was continuous with a thick extraradicular biofilm covering the cementum and dentin in resorptive defects. The extraradicular biofilm showed areas of mineralization and was dominated by filamentous bacteria. The 2 cases with wet canals and treatment failure were associated with complex persistent infection in the apical part of the root canal system extending to form thick and partially mineralized biofilm structures (calculus) on the outer apical root surface.