Digital technology revolutionizing mandibular fracture treatment: a comparative analysis of patient-specific plates and conventional titanium plates.

OBJECTIVES: The treatment of fractures prioritizes the restoration of functionality through the realignment of fractured segments. Conventional methods, such as titanium plates, have been employed for this purpose; however, certain limitations have been observed, leading to the development of patient-specific plates. Furthermore, recent advancements in digital technology in dentistry enable the creation of virtual models and simulations of surgical procedures. The aim was to assess the clinical effectiveness of patient-specific plates utilizing digital technology in treating mandibular fractures compared to conventional titanium plates. MATERIALS AND METHODS: Twenty patients diagnosed with mandibular fractures were included and randomly assigned to either the study or control groups. The surgical procedure comprised reduction and internal fixation utilizing patient-specific plates generated through virtual surgery planning with digital models for the study group, while the control group underwent the same procedure with conventional titanium plates. Assessment criteria included the presence of malunion, infection, sensory disturbance, subjective occlusal disturbance and occlusal force in functional maximum intercuspation (MICP). Statistical analysis involved using the Chi-square test and one-way repeated measures analysis of variance. RESULTS: All parameters showed no statistically significant differences between the study and control groups, except for the enhancement in occlusal force in functional MICP, where a statistically significant difference was observed (p = 0.000). CONCLUSION: Using patient-specific plates using digital technology has demonstrated clinical effectiveness in treating mandibular fractures, offering advantages of time efficiency and benefits for less experienced surgeons. CLINICAL RELEVANCE: Patient-specific plates combined with digital technology can be clinically effective in mandibular fracture treatment.

Interactions of Nanoparticles with Macrophages and Feasibility of Drug Delivery for Asthma.

Understanding the interaction between nanoparticles and immune cells is essential for the evaluation of nanotoxicity and development of nanomedicines. However, to date, there is little data on the membrane microstructure and biochemical changes in nanoparticle-loaded immune cells. In this study, we observed the microstructure of nanoparticle-loaded macrophages and changes in lipid droplets using holotomography analysis. Quantitatively analyzing the refractive index distribution of nanoparticle-loaded macrophages, we identified the interactions between nanoparticles and macrophages. The results showed that, when nanoparticles were phagocytized by macrophages, the number of lipid droplets and cell volume increased. The volume and mass of the lipid droplets slightly increased, owing to the absorption of nanoparticles. Meanwhile, the number of lipid droplets increased more conspicuously than the other factors. Furthermore, alveolar macrophages are involved in the development and progression of asthma. Studies have shown that macrophages play an essential role in the maintenance of asthma-related inflammation and tissue damage, suggesting that macrophage cells may be applied to asthma target delivery strategies. Therefore, we investigated the target delivery efficiency of gold nanoparticle-loaded macrophages at the biodistribution level, using an ovalbumin-induced asthma mouse model. Normal and severe asthma models were selected to determine the difference in the level of inflammation in the lung. Consequently, macrophages had increased mobility in models of severe asthma, compared to those of normal asthma disease. In this regard, the detection of observable differences in nanoparticle-loaded macrophages may be of primary interest, as an essential endpoint analysis for investigating nanomedical applications and immunotheragnostic strategies.

Association between asthma and cardiovascular disease.

BACKGROUND: Epidemiological studies on the association between asthma and cardiovascular disease have reported conflicting results. This cross-sectional study evaluated the association between asthma and ischaemic heart disease (IHD)/stroke in Korean adults. MATERIALS AND METHODS: Data from the Korean Genome and Epidemiology Study-Health Examinees were used. Among 173 209 participants, 3162 asthmatic and 159 408 control participants were selected. Histories of asthma, IHD and stroke were obtained. Participants were categorized according to their current status of asthma management: 'well-controlled', 'being treated', and 'not being treated'. Crude and adjusted (age, gender, body mass index, income, smoking, alcohol consumption, hypertension, diabetes, dyslipidaemia and nutritional intake) odds ratios (ORs) for IHD and stroke in asthmatic patients were analysed using a multiple logistic regression model. RESULTS: Participants with asthma reported a significantly higher prevalence of IHD (6.0% vs 3.0%) and stroke (2.3% vs 1.4%) than those without asthma (P < .001). Asthmatic participants had a higher OR (1.46, 95% confidence interval [CI] = 1.251-1.71, P < .001) for IHD than those without asthma. The association between asthma and IHD was significant only in patients aged ≥53 years (men: adjusted OR = 1.31, 95% CI = 1.01-1.70, P = .046; women: adjusted OR = 1.64, 95% CI = 1.32-2.03, P < .001) according to age and sex and in the 'not being treated' asthma group (adjusted OR = 1.47, 95% CI = 1.14-1.91, P = .003) according to the asthma management status. Stroke was not significantly associated with asthma (adjusted OR = 1.17, 95% CI = 0.92-1.48, P = .203) in the adjusted model and all subgroup analyses. CONCLUSION: Asthma was associated with IHD, mainly in older patients and untreated asthma patients, but not with stroke.

Enhanced Bone Regeneration in Variable-Type Biphasic Ceramic Phosphate Scaffolds Using rhBMP-2.

Our aim was to investigate the bone regeneration capacity of powder-type biphasic ceramic scaffold (BCP powder), block-type BCP (BCP block), and collagen-added block-type BCP (BCP collagen) with different concentrations of recombinant human bone morphogenetic protein 2 (rhBMP-2) in an animal model. Four rabbits were assigned to each of the following groups: no graft + rhBMP-2 (0.1/0.2 mg/mL), BCP powder + rhBMP-2 (0.1/0.2 mg/mL), BCP block + rhBMP-2 (0.1/0.2 mg/mL), and BCP collagen + rhBMP-2 (0.1/0.2 mg/mL), i.e., a total of 32 rabbits. Polycarbonate tubes (Φ 7 mm × 5 mm) for supporting scaffolds were fixed into a 7 mm round border. Subsequently, 0.1 mL of rhBMP-2 solutions with different concentrations was injected into the tubes. Both radiological and histomorphometric analyses showed that osteogenesis was not enhanced by increasing the concentration of rhBMP-2 in all groups at both 3 and 6 weeks. Radiological analysis showed that bone formation was higher in the BCP collagen group than in the BCP powder and BCP block groups at both rhBMP-2 concentrations at 3 weeks. rhBMP-2 enhanced bone formation; however, as the concentration increased, bone formation could not be enhanced infinitely. Collagen-added alloplastic graft material may be useful for mediating rapid bone formation in initial stages.

Bone Regeneration of a 3D-Printed Alloplastic and Particulate Xenogenic Graft with rhBMP-2.

This study aimed to evaluate the bone regeneration capacity of a customized alloplastic material and xenograft with recombinant human bone morphogenetic protein-2 (rhBMP-2). We prepared hydroxyapatite (HA)/tricalcium phosphate (TCP) pure ceramic bone blocks made using a 3D printing system and added rhBMP-2 to both materials. In eight beagle dogs, a total of 32 defects were created on the lower jaws. The defective sites of the negative control group were left untreated (N group; 8 defects), and those in the positive control group were filled with particle-type Bio-Oss (P group; 12 defects). The defect sites in the experimental group were filled with 3D-printed synthetic bone blocks (3D group; 12 defects). Radiographic and histological evaluations were performed after healing periods of 6 and 12 weeks and showed no significant difference in new bone formation and total bone between the P and 3D groups. The 3D-printed custom HA/TCP graft with rhBMP-2 showed bone regeneration effects similar to that of particulate Bio-Oss with rhBMP-2. Through further study and development, the application of 3D-printed customized alloplastic grafts will be extended to various fields of bone regeneration.

Analysis of the relationship between periodontitis and osteoporosis/fractures: a cross-sectional study.

BACKGROUND: Chronic periodontitis is a multifactorial inflammatory disease resulting in patients exhibiting high levels of inflammatory factors causing systemic inflammatory bone destruction that may lead to osteoporosis development. The association between periodontitis and osteoporosis has been documented; however, the findings remain unclear. This study aimed to identify the association between periodontitis and osteoporosis using a cross-sectional study design and Korean Genome and Epidemiology Study (KoGES) health examinee data. METHODS: This cross-sectional study used epidemiological data from the KoGES during 2004-2016. Of 125,324 participants (age, 40-79 years), 9969 with periodontitis and 115,332 controls (without periodontitis) were selected. We analyzed the history of osteoporosis and fractures of all participants. All participants were examined according to age, sex, income group, obesity, smoking habits, alcohol consumption, and food intake. To analyze the odds ratio (OR) of periodontitis for those with osteoporosis and fractures, a logistic regression model was used. RESULTS: The adjusted odds ratio (aOR) of periodontitis for osteoporosis was 2.16 (95% confidence interval [CI], 2.01-2.31; P < 0.001). The aOR of periodontitis for any fracture was 1.54 (95% CI 1.46-1.62; P < 0.001). CONCLUSION: Osteoporosis and fractures are associated with periodontitis. Performing regular oral hygiene and examinations of bone mineral density are recommended to prevent aggravation of osteoporosis and periodontitis.

Soft tissue expander for vertically atrophied alveolar ridges: Prospective, multicenter, randomized controlled trial.

OBJECTIVES: Conventional guided bone regeneration (GBR) limits the amount of bone graft due to limited soft tissue expansion. We hypothesize that the use of tissue expander will successfully augment soft tissue prior to bone graft, allowing for sufficient amount of grafting which will lead to a more stable and effective vertical bone graft. The authors aimed to evaluate effectiveness of the novel self-inflating tissue expander for vertical augmentation in terms of soft tissue expansion, clinical outcomes, and related complications. MATERIAL AND METHODS: A prospective, multicenter, randomized controlled trial was performed on patients requiring vertical augmentation. For experimental group patients, the tissue expander was subperiosteally implanted and followed by a tunneling bone graft without full flap reflection. Control patients underwent conventional vertical GBR. Primary objectives were to evaluate the dimensional changes of soft tissue and radiographic vertical bone gain and retention. As a secondary outcome, clinical complications and thickness changes of expanded overlying tissue were assessed and analyzed. RESULTS: Twenty-three patients in each group were included. During a 4-week expansion, two of the experimental group showed over-expansion and one showed mucosal perforation associated with previous severe scars. The other patients showed uneventful expansion and mean tissue augmentation was 6.88 ± 1.64 mm vertically. Ultrasonographic measurements of overlying gingiva revealed no thinning after tissue expansion (p > .05). Significantly higher vertical bone gain was shown in the experimental group (5.12 ± 1.25 mm) compared with that in the control patients (4.22 ± 1.15 mm; p < .05). After a 6-month retention period, the mean vertical bone measurement of the controls had decreased to 1.90 mm (55.0% reduction), which was a significantly greater decrease than that in the experimental group (mean 3.55 mm, 30.7% reduction; p < .05). CONCLUSION: Our results demonstrated the effectiveness of tissue expanders followed by tunneling bone graft for vertical augmentation; however, studies comparing the two techniques without tissue expanders are needed to elucidate the net effect of tissue expansion.

Mortality and cause of death in physical activity and insufficient physical activity participants: a longitudinal follow-up study using a national health screening cohort.

BACKGROUND: Few studies have examined the association between physical activity (PA) and various causes of mortality in Korea. The aim of our study was to evaluate mortality and causes of death between PA and insufficient PA using Korean national cohort data. METHODS: The health screening cohort data from the Korean National Health Insurance Service-National Sample Cohort from 2009 to 2015 were used. 'PA' was determined if participants walked or performed moderate-intensity activity ≥5 d/week for ≥30 min, or vigorous-intensity activity ≥3 d/week for ≥20 min. Other participants were classified as 'insufficient PA'. The PA and insufficient PA groups were matched by age, sex, income, and region of residence in a 1:1 ratio. Causes of death were classified into 13 categories. Crude and adjusted hazard ratios (HRs) with 95% confidence intervals (CIs) for all mortality rates were analyzed using a stratified Cox proportional hazard model. Age, sex, income, and region of residence were stratified. Subgroup analyses were performed according to age, sex, and obesity status. The odds ratio according to the causes of death was calculated by the chi-square test. RESULTS: The adjusted HR for mortality in the PA group was 0.85 (95% CI = 0.82-0.88). In subgroup analyses according to age, sex, and obesity status, results were consistent with the main findings in < 60-year-old females, ≥ 60-year-old males and females, and in all subgroups by obesity. The death rate by neoplasm, mental diseases, neurologic disease, circulatory disease, respiratory disease, digestive disease, abnormal finding, and trauma were lower in the PA than the insufficient PA group. CONCLUSIONS: These results suggest that PA is inversely associated with mortality caused specifically by diseases reflected by mental, respiratory, cancer, and cardiovascular conditions. Additionally, PA is inversely associated with mortality compared to insufficient PA in all obesity status.

3D-Printed Ceramic Bone Scaffolds with Variable Pore Architectures.

This study evaluated the mechanical properties and bone regeneration ability of 3D-printed pure hydroxyapatite (HA)/tricalcium phosphate (TCP) pure ceramic scaffolds with variable pore architectures. A digital light processing (DLP) 3D printer was used to construct block-type scaffolds containing only HA and TCP after the polymer binder was completely removed by heat treatment. The compressive strength and porosity of the blocks with various structures were measured; scaffolds with different pore sizes were implanted in rabbit calvarial models. The animals were observed for eight weeks, and six animals were euthanized in the fourth and eighth weeks. Then, the specimens were evaluated using radiological and histological analyses. Larger scaffold pore sizes resulted in enhanced bone formation after four weeks (p < 0.05). However, in the eighth week, a correlation between pore size and bone formation was not observed (p > 0.05). The findings showed that various pore architectures of HA/TCP scaffolds can be achieved using DLP 3D printing, which can be a valuable tool for optimizing bone-scaffold properties for specific clinical treatments. As the pore size only influenced bone regeneration in the initial stage, further studies are required for pore-size optimization to balance the initial bone regeneration and mechanical strength of the scaffold.

Bone Regeneration Capability of 3D Printed Ceramic Scaffolds.

In this study, we evaluated the bone regenerative capability of a customizable hydroxyapatite (HA) and tricalcium phosphate (TCP) scaffold using a digital light processing (DLP)-type 3D printing system. Twelve healthy adult male beagle dogs were the study subjects. A total of 48 defects were created, with two defects on each side of the mandible in all the dogs. The defect sites in the negative control group (sixteen defects) were left untreated (the NS group), whereas those in the positive control group (sixteen defects) were filled with a particle-type substitute (the PS group). The defect sites in the experimental groups (sixteen defects) were filled with a 3D printed substitute (the 3DS group). Six dogs each were exterminated after healing periods of 4 and 8 weeks. Radiological and histomorphometrical evaluations were then performed. None of the groups showed any specific problems. In radiological evaluation, there was a significant difference in the amount of new bone formation after 4 weeks (p < 0.05) between the PS and 3DS groups. For both of the evaluations, the difference in the total amount of bone after 8 weeks was statistically significant (p < 0.05). There was no statistically significant difference in new bone between the PS and 3DS groups in both evaluations after 8 weeks (p > 0.05). The proposed HA/TCP scaffold without polymers, obtained using the DLP-type 3D printing system, can be applied for bone regeneration. The 3D printing of a HA/TCP scaffold without polymers can be used for fabricating customized bone grafting substitutes.

Orthognathic surgery Deteriorates the osseointegration of dental implants: A propensity-matched multicentre cohort study.

This study aimed to investigate the possible influence of the regional acceleratory phenomenon (RAP) on dental implant osseointegration. Orthognathic surgery was set as an intervention for RAP, and a multicentre cohort study of two groups was undertaken. Group O included patients with single implant placement at least 4 months after orthognathic surgery and functional loading for more than 1 year, while controls (Group C) were without any major surgery. Clinical and radiographic assessments of implants, including changes in marginal bone levels, were analysed at baseline, 6- and 12-month follow-up. Bivariate analysis of two groups with propensity score matching was performed. After propensity score matching, all 10 confounding variables had acceptable standardised difference scores (<20%), indicating that the matching procedure had efficiently balanced the two groups. Following the propensity score adjustment, the marginal bone loss was significantly higher in Group O than the control at 6 months (1.66 ± 1.05 mm vs 0.59 ± 0.64 mm, P < 0.001) and 12 months (2.30 ± 1.27 mm vs 0.82 ± 0.78 mm, P < 0.001). Compared to Group C, subjects in Group O had a higher incidence of peri-implant mucositis and implantitis (11.8% vs 1.5%, P = 0.033). Impaired osseointegration of dental implants was associated with orthognathic surgery. Special considerations for peri-implant soft and hard tissue stability should be addressed to obtain ideal treatment results and prognosis for patients who have had prior orthognathic surgery.

The Bioresorption and Guided Bone Regeneration of Absorbable Hydroxyapatite-Coated Magnesium Mesh.

INTRODUCTION: Nonabsorbable metallic membrane for guided bone regeneration is remained permanently even though after complete healing. There would be metallic exposure followed by the risk of infection; the membrane should be removed for the additional procedure such as implant installation. Since absorbable nonmetallic mesh is absorbed within 3 to 6 months, it is unnecessary to be removed. However, the absorbable membrane shows lower retention, lower mechanical strength, and difficulty of manipulation than the nonabsorbable ones.The purpose of this study is to evaluate the ability of absorbable metallic mesh (hydroxyapatite-coated magnesium mesh) with acceptable mechanical properties and satisfying biocompatibility. METHODS: The bioresorption and fate of magnesium were evaluated in Sprague Dawley rat (SD rat) with critical defect of calvarium. The critical defect with a diameter of 8 mm was made on calvarium using trephine bur in 18 SD rats. The defected models were divided into 2 groups: the control group (9 SD rat) without mesh and the experimental group (9 SD rat) with the insertion of prototype HA-coated magnesium mesh. The 3 SD rats were sacrificed at 6, 12, and 18 weeks. The histopathological and radiographic examinations were performed afterward. RESULTS: In the control group, there was no specific symptom. The experimental group also showed no specific symptom including swelling and dehiscence related to hydrogen gas formation. From 6 to 18 weeks, the experimental group showed the progressive absorption and fracture of magnesium mesh. However, there was no specific effectiveness of guided bone regeneration in both groups. There was no significant difference in bone volume, bone surface, and bone volume fraction between the negative control group and the group with magnesium mesh (P >0.05). CONCLUSION: Hydroxyapatite-coated magnesium mesh showed reasonable process of bioresorption and bony reaction; however, the effectiveness of guided bone regeneration and management of the bioresorption rate should be reconsidered.

Effects of electromagnetic field (PEMF) exposure at different frequency and duration on the peripheral nerve regeneration: in vitro and in vivo study.

PURPOSE: The purpose was to clarify the influence of frequency and exposure time of pulsed electromagnetic fields (PEMF) on the peripheral nerve regeneration. MATERIALS AND METHODS: Immortalized rat Schwann cells (iSCs) (1 × 10(2)/well) were exposed at four different conditions in 1 mT (50 Hz 1 h/d, 50 Hz 12 h/d, 150 Hz 1 h/d and 150 Hz 12h/d). Cell proliferation, mRNA expression of S100 and brain-derived neurotrophic factor (BDNF) were analyzed. Sprague-Dawley rats (200-250 g) were divided into six groups (n = 10 each): control, sham, 50 Hz 1 h/d, 50 Hz 12 h/d, 150 Hz 1 h/d and 150 Hz 12 Hr/d. Mental nerve was crush-injured and exposed at four different conditions in 1 mT (50 Hz 1 Hr/d, 50 Hz 12 Hr/d, 150 Hz 1 h/d and 150 Hz 12 h/d). Nerve regeneration was evaluated with functional test, histomorphometry and retrograde labeling of trigeminal ganglion. RESULTS: iSCs proliferation with 50 Hz, 1 h/d was increased from fourth to seventh day; mRNA expression of S100 and BDNF was significantly increased at the same condition from first week to third week (p < .05 vs. control); difference score was increased at the second and third week, and gap score was increased at the third under 50 Hz 1 h PEMF compared with control while other conditions showed no statistical meaning. Axon counts and retrograde labeled neurons were significantly increased under PEMF of four different conditions compared with control. Although there was no statistical difference, 50 Hz, 1 h PEMF showed highest regeneration ability than other conditions. CONCLUSION: PEMF enhanced peripheral nerve regeneration, and that it may be due to cell proliferation and increase in BDNF and S100 gene expression.

Customized three-dimensional printed ceramic bone grafts for osseous defects: a prospective randomized study.

Ridge resorption can result in insufficient bone volume for implant surgery, necessitating bone substitutes to restore the resorption area. Recent advances in computer-aided design and manufacturing enable the use of alloplastic bone graft materials with customizable compositions or shapes. This randomized study evaluated the clinical effectiveness of a customized three-dimensional (3D) printed alloplastic bone material. Sixty patients requiring guided bone regeneration for implant installation following tooth extraction due to alveolar bone resorption were recruited at two institutions. The participants were randomly allocated to either a group that received 3D-printed patient-customized bone graft material or a group that received conventional block bone graft material. Implant installation with bone harvesting was performed approximately 5 months after bone grafting. Histological and radiological assessments of the harvested bone area were performed. The experimental group had a significantly higher percent bone volume and a smaller tissue surface than the control group. Bone volume, bone surface, bone surface/volume ratio, bone surface density (bone surface/total volume), and bone mineral density did not differ significantly between groups. Patient-customized bone graft materials offer convenience and reduce patient discomfort. The findings suggest 3D-printed patient-customized bone graft materials could be used as an alternative for simpler bone grafting procedures.

Preclinical and Preliminary Evaluation of Perceived Image Quality of AI-Processed Low-Dose CBCT Analysis of a Single Tooth.

This study assessed AI-processed low-dose cone-beam computed tomography (CBCT) images for single-tooth diagnosis. Human-equivalent phantoms were used to evaluate CBCT image quality with a focus on the right mandibular first molar. Two CBCT machines were used for evaluation. The first CBCT machine was used for the experimental group, in which images were acquired using four protocols and enhanced with AI processing to improve quality. The other machine was used for the control group, where images were taken in one protocol without AI processing. The dose-area product (DAP) was measured for each protocol. Subjective clinical image quality was assessed twice by five dentists, with a 2-month interval in between, using 11 parameters and a six-point rating scale. Agreement and statistical significance were assessed with Fleiss' kappa coefficient and intra-class correlation coefficient. The AI-processed protocols exhibited lower DAP/field of view values than non-processed protocols, while demonstrating subjective clinical evaluation results comparable to those of non-processed protocols. The Fleiss' kappa coefficient value revealed statistical significance and substantial agreement. The intra-class correlation coefficient showed statistical significance and almost perfect agreement. These findings highlight the importance of minimizing radiation exposure while maintaining diagnostic quality as the usage of CBCT increases in single-tooth diagnosis.

Randomized controlled trial of digital therapeutics for temporomandibular disorder: A pilot study.

OBJECTIVES: Temporomandibular disorder (TMD) is a common condition that affects the temporomandibular joint (TMJ) and the muscles of the jaw, resulting in pain and dysfunction. TMD is affected by both behavioral and psychological factors. Digital therapeutics (DTx) can exert therapeutic effects by controlling behavioral factors through the delivery of appropriate interventions. Here, we report an open-label randomized control trial to evaluate the efficacy of DTx for TMD. METHODS: We recruited 40 participants diagnosed with TMD. Participants were randomly divided into an intervention group (DTx use, n = 20) and a control group (n = 20). The intervention group received the usual treatment process for TMD in addition to the use of the DTx. The control group received the usual treatments only. Patients in both groups were followed up for 3-4 weeks, and outcome data were collected and analyzed. RESULT: The intervention group showed a significant reduction in pain scores as measured by the numerical rating scale (NRS) (p = 0.016). Additionally, the intervention group showed a statistically significant increase in maximal mouth opening compared to the control group (p = 0.0079). However, there were no significant differences in improvement in the Jaw Functional Limitation Scale, Oral Behavior Checklist, and Patient Health Questionnaire-4 between the two groups (p = 0503, = 0.820, and = 0.943, respectively). CONCLUSION: This RCT reveals DTx potential in TMD, showing pain and mouth opening improvements with conventional treatment. But no significant changes were noted in other outcomes. The findings advocate for more extensive, long-term research to solidify DTx's role in TMD management. CLINICAL SIGNIFICANCE: This research underlines DTx potential to improve pain outcomes in TMD therapy, reinforcing its value as a complementary treatment modality.

Advancements in computer-assisted orthognathic surgery: A comprehensive review and clinical application in South Korea.

OBJECTIVES: Orthognathic surgery (OS) has evolved with technological advancements, notably through the implementation of computer-assisted orthognathic surgery (CAOS). This article aims to elucidate various types of CAOS and their efficiency and accuracy, supplemented by a thorough literature review focusing on their clinical applications in South Korea. STUDY SELECTION, DATA, AND SOURCES: A comprehensive search strategy was employed, including systematic reviews, meta-analyses, randomized controlled trials, and observational studies published until December 2023 in the PubMed, MEDLINE, and Google Scholar databases. The literature search was limited to articles written in English. RESULTS: Static CAOS demonstrated high precision, reduced operative time, and high accuracy, suggesting its potential reliability in orthognathic procedures. Dynamic CAOS presented a promising avenue for exploration, showing an accuracy comparable to that of traditional methods. The critical considerations for CAOS include accuracy, time efficiency, and cost-effectiveness. Recent studies have indicated advancements in the time efficiency of static CAOS. Static CAOS requires less equipment and is more cost-effective than dynamic CAOS. CONCLUSIONS: CAOS offers clear advantages over conventional OS in terms of surgical convenience and accuracy in implementing the surgical plan. To achieve recognition as the gold standard method for maxillofacial deformity treatment, CAOS must overcome its limitations and undergo continuous verification via well-designed studies. CLINICAL SIGNIFICANCE: The introduction of CAOS, mainly static CAOS with high precision and reduced surgical time, signifies a notable advancement in OS. However, rigorous studies are warranted to validate CAOS as the gold standard for treating maxillofacial deformities.

A Comparative Analysis of Artificial Intelligence and Manual Methods for Three-Dimensional Anatomical Landmark Identification in Dentofacial Treatment Planning.

With the growing demand for orthognathic surgery and other facial treatments, the accurate identification of anatomical landmarks has become crucial. Recent advancements have shifted towards using three-dimensional radiologic analysis instead of traditional two-dimensional methods, as it allows for more precise treatment planning, primarily relying on direct identification by clinicians. However, manual tracing can be time-consuming, mainly when dealing with a large number of patients. This study compared the accuracy and reliability of identifying anatomical landmarks using artificial intelligence (AI) and manual identification. Thirty patients over 19 years old who underwent pre-orthodontic and orthognathic surgery treatment and had pre-orthodontic three-dimensional radiologic scans were selected. Thirteen anatomical indicators were identified using both AI and manual methods. The landmarks were identified by AI and four experienced clinicians, and multiple ANOVA was performed to analyze the results. The study results revealed minimal significant differences between AI and manual tracing, with a maximum deviation of less than 2.83 mm. This indicates that utilizing AI to identify anatomical landmarks can be a reliable method in planning orthognathic surgery. Our findings suggest that using AI for anatomical landmark identification can enhance treatment accuracy and reliability, ultimately benefiting clinicians and patients.

Patient-specific plates for facial fracture surgery: A retrospective case series.

OBJECTIVES: Surgeons often encounter challenges when treating maxillofacial fractures using conventional methods that involve trimming or bending ready-made titanium plates for open reduction and internal fixation (ORIF) since it can be time-consuming, imprecise, and inconvenient. This retrospective case series aimed to introduce a novel bone reduction method that utilizes virtual planning, patient-specific surgical guides, and titanium plates. METHODS: Seven patients with mandibular symphysis or subcondylar fractures resulting from facial trauma underwent cone-beam computed tomography (CBCT) or facial CT scans, and their medical histories were documented. Virtual surgery was conducted based on three-dimensional (3D) stereolithography images derived from CT scans using the FaceGide software (MegaGen, Daegu, Korea). ORIF was performed using patient-specific surgical guides and plates that were designed, printed, and milled. Radiographic, clinical, and occlusal evaluations were conducted at two weeks and six weeks postoperatively. Subsequently, 3D images from virtual surgery and postoperative CT scans were compared. RESULTS: The comparison of 3D virtual surgery and postoperative images revealed minimal surface differences of less than 1 mm. T-scan evaluations indicated that there were no statistically significant differences between the two- and six-week postoperative assessments. Favorable clinical outcomes were observed. CONCLUSION: This novel method demonstrated stable outcomes in terms of occlusion and healing, with no notable complications. Consequently, this approach may serve as a viable alternative to conventional methods. CLINICAL SIGNIFICANCE: Facial fracture surgery that utilizes patient-specific surgical guides and plates within a digital workflow can facilitate meticulous surgical planning, reducing the risk of complications and minimizing operation time.

Effectiveness of creating digital twins with different digital dentition models and cone-beam computed tomography.

Distortion of dentition may occur in cone-beam computed tomography (CBCT) scans due to artifacts, and further imaging is frequently required to produce digital twins. The use of a plaster model is common; however, it has certain drawbacks. This study aimed to assess the feasibility of different digital dentition models over that of plaster casts. Plaster models, alginate impressions, intraoral scan (IOS) images, and CBCT images of 20 patients were obtained. The desktop model scanner was used to scan the alginate impression twice, five minutes and two hours after impression-making. Using an IOS, the full arch was scanned in segments using CS 3600 and simultaneously with i700 wireless. The digital twins obtained from the alginate impression and IOS were superimposed with those obtained from the plaster cast. The differences and distances at each reference point were measured. Scans of alginate impressions after two hours showed the greatest discrepancies, but these were all less than the CBCT voxel size of 0.39 mm. Alginate impression scans and IOS are suitable supplements to CBCT compared to the plaster model. Accuracy can be improved by scanning the alginate impression within five minutes or by intraoral scanning of the entire arch with segmentation.