A Versatile Electronic Tongue Based on Surface Plasmon Resonance Imaging and Cross-Reactive Sensor Arrays-A Mini-Review.

Nowadays, there is a strong demand for the development of new analytical devices with novel performances to improve the quality of our daily lives. In this context, multisensor systems such as electronic tongues (eTs) have emerged as promising alternatives. Recently, we have developed a new versatile eT system by coupling surface plasmon resonance imaging (SPRi) with cross-reactive sensor arrays. In order to largely simplify the preparation of sensing materials with a great diversity, an innovative combinatorial approach was proposed by combining and mixing a small number of easily accessible molecules displaying different physicochemical properties. The obtained eT was able to generate 2D continuous evolution profile (CEP) and 3D continuous evolution landscape (CEL), which is also called 3D image, with valuable kinetic information, for the discrimination and classification of samples. Here, diverse applications of such a versatile eT have been summarized. It is not only effective for pure protein analysis, capable of differentiating protein isoforms such as chemokines CXCL12α and CXCL12γ, but can also be generalized for the analysis of complex mixtures, such as milk samples, with promising potential for monitoring the deterioration of milk.

Carbohydrates as new probes for the identification of closely related Escherichia coli strains using surface plasmon resonance imaging.

Prevention of foodborne diseases depends highly on our ability to control rapidly and accurately a possible contamination of food. So far, standard procedures for bacterial detection require time-consuming bacterial cultures on plates before the pathogens can be detected and identified. We present here an innovative biochip, based on direct differential carbohydrate recognitions of five closely related Escherichia coli strains, including the enterohemorragic E. coli O157:H7. Our device relies on efficient grafting of simple carbohydrates on a gold surface and on the monitoring of their interactions with bacteria during their culture using surface plasmon resonance imaging. We show that each of the bacteria interacts in a different way with the carbohydrate chip. This allows the detection and discrimination of the tested bacterial strains in less than 10 h from an initial bacterial concentration of 10(2) CFU·mL(-1). This is an improvement over previously described systems in terms of cost, easiness to use, and stability. Easily conceived and easily regenerated, this tool is promising for the future of food safety.

Spatial resolution in prism-based surface plasmon resonance microscopy.

Several optical surface sensing techniques, such as Surface Plasmon Resonance (SPR), work by imaging the base of a prism by one of its faces. However, such a fundamental optical concern has not been fully analyzed and understood so far, and spatial resolution remains a critical and controversial issue. In SPR, the propagation length L(x) of the surface plasmon waves has been considered as the limiting factor. Here, we demonstrate that for unoptimized systems geometrical aberrations caused by the prism can be more limiting than the propagation length. By combining line-scan imaging mode with optimized prisms, we access the ultimate lateral resolution which is diffraction-limited by the object light diffusion. We describe several optimized configurations in water and discuss the trade-off between L(x) and sensitivity. The improvement of resolution is confirmed by imaging micro-structured PDMS stamps and individual living eukaryote cells and bacteria on field-of-view from 0.1 to 20 mm(2).

Effects of formamide on the thermal stability of DNA duplexes on biochips.

In molecular biology, formamide (FA) is a commonly used denaturing agent for DNA. Although its influence on DNA duplex stability in solution is well established, little is known about immobilized DNA on microarrays. We measured thermal denaturation curves for oligonucleotides immobilized by two standard protocols: thiol self-assembling and pyrrole electrospotting. A decrease of the DNA denaturation temperature with increasing FA fraction of the solvent was observed on sequences with mutations for both surface chemistries. The average dissociation temperature decrease was found to be -0.58+/-0.05 degrees C/% FA (v/v) independently of grafting chemistry and probe sequence.

SPR imaging for label-free multiplexed analyses of DNA N-glycosylase interactions with damaged DNA duplexes.

Base excision repair (BER) is the major mechanism for the correction of damaged nucleobases resulting from the alkylation and oxidation of DNA. The first step in the BER pathway consists of excision of the abnormal base by several specific DNA N-glycosylases. A decrease in BER activity was found to be related to an increased risk of carcinogenesis and aging. To investigate BER activities we set up a new device for DNA repair analysis based on surface plasmon resonance imaging (SPRi). Oligonucleotides bearing an abnormal nucleoside, namely 8-oxo-7,8-dihydro-2'-deoxyguanosine and (5'S)-5',8-cyclopurine-2'-deoxynucleoside, were grafted by a pyrrole electro-copolymerization process on a glass prism coated with a gold layer. The latter label-free DNA sensor chip permits the detection of N-glycosylase/AP-lyase activity as well as the binding of repair proteins to DNA damage without cleavage activity. Thus, the Fapy DNA N-glycosylase (Fpg) protein is shown as expected to bind and then cleave its natural substrate, namely 8-oxo-7,8-dihydro-guanine, together with the resulting abasic site. Using the current SPR imaging-based DNA array we observed an original binding activity of Fpg towards the (5'S)-5',8-cyclodAdenosine residue. These results altogether show that SPR imaging may be used to simultaneously and specifically detect recognition and excision of several damaged DNA nucleobases, and constitutes an interesting technique to screen inhibitors of DNA repair proteins.

Real-time detection of lymphocytes binding on an antibody chip using SPR imaging.

We demonstrate the use of SPR imaging for the detection of site-specific binding of either B or T lymphocyte populations on an electrochemically-grafted antibody array.

Fabrication of nanotweezers and their remote actuation by magnetic fields.

A new kind of nanodevice that acts like tweezers through remote actuation by an external magnetic field is designed. Such device is meant to mechanically grab micrometric objects. The nanotweezers are built by using a top-down approach and are made of two parallelepipedic microelements, at least one of them being magnetic, bound by a flexible nanohinge. The presence of an external magnetic field induces a torque on the magnetic elements that competes with the elastic torque provided by the nanohinge. A model is established in order to evaluate the values of the balanced torques as a function of the tweezers opening angles. The results of the calculations are confronted to the expected values and validate the overall working principle of the magnetic nanotweezers.

SPR imaging based electronic tongue via landscape images for complex mixture analysis.

Electronic noses/tongues (eN/eT) have emerged as promising alternatives for analysis of complex mixtures in the domain of food and beverage quality control. We have recently developed an electronic tongue by combining surface plasmon resonance imaging (SPRi) with an array of non-specific and cross-reactive receptors prepared by simply mixing two small molecules in varying and controlled proportions and allowing the mixtures to self-assemble on the SPRi prism surface. The obtained eT generated novel and unique 2D continuous evolution profiles (CEPs) and 3D continuous evolution landscapes (CELs) based on which the differentiation of complex mixtures such as red wine, beer and milk were successful. The preliminary experiments performed for monitoring the deterioration of UHT milk demonstrated its potential for quality control applications. Furthermore, the eT exhibited good repeatability and stability, capable of operating after a minimum storage period of 5 months.

Electronic tongue generating continuous recognition patterns for protein analysis.

In current protocol, a combinatorial approach has been developed to simplify the design and production of sensing materials for the construction of electronic tongues (eT) for protein analysis. By mixing a small number of simple and easily accessible molecules with different physicochemical properties, used as building blocks (BBs), in varying and controlled proportions and allowing the mixtures to self-assemble on the gold surface of a prism, an array of combinatorial surfaces featuring appropriate properties for protein sensing was created. In this way, a great number of cross-reactive receptors can be rapidly and efficiently obtained. By combining such an array of combinatorial cross-reactive receptors (CoCRRs) with an optical detection system such as surface plasmon resonance imaging (SPRi), the obtained eT can monitor the binding events in real-time and generate continuous recognition patterns including 2D continuous evolution profile (CEP) and 3D continuous evolution landscape (CEL) for samples in liquid. Such an eT system is efficient for discrimination of common purified proteins.

Effect of lipid coating on the interaction between silica nanoparticles and membranes.

Lipid coating is a method highly used to improve the biocompatibility of nanoparticles (NPs), even though its effect on the NP properties is still object of investigation. Herein, silica NPs containing methylene blue, which is a photosensitizer used in a variety of biomedical applications, were coated with a phospholipid bilayer. Regarding the photophysical properties, lipid-coating did not cause significant changes since bare and lipid-coated NPs presented very similar absorption spectra and generated singlet oxygen with similar efficiencies. However, NP interaction with cells and membrane mimics was totally different for bare and lipid-coated NPs. Lipid-coated NPs were distributed through the cell cytoplasm whereas bare NPs were detected only in some vacuolar regions within the cells. Since cellular uptake and cytolocalization are influenced by NP adsorption on cell membranes, the interaction of lipid-coated and bare NPs were studied on a membrane mimic, i.e., Hybrid Bilayer Membranes (HBMs) made of different compositions of negatively charged and neutral lipids. Interactions of bare and lipid-coated NPs with HBMs were analyzed by Surface Plasmon Resonance Imaging. Bare NPs presented high adsorption and aggregation on HBMs independently of the surface charge. Conversely, lipid-coated NPs presented less aggregation on the membrane surface and the adsorption was dependent on the charges of the NPs and of the HBMs. Our results indicated that NPs aggregation on the membrane surface can be modulated by lipid coating, which affects the cytosolic distribution of the NPs.

Photothermal effect for localized desorption of primary lymphocytes arrayed on an antibody/DNA-based biochip.

This work proposes a miniaturized system able to perform multiple cell capture followed by cell-type selective release from a biochip surface. Unlabelled lymphocytes were first specifically captured onto a DNA array by antibody-DNA conjugates. The immobilized cells were subsequently released under spatiotemporal control within local heating generated by intense Surface Plasmon Resonance (SPR) produced by laser illumination.

Relationship between humoral response against hepatitis C virus and disease overcome.

ABSTRACT: Hepatitis C virus infection leads to liver disease whose severity can range from mild to serious lifelong illness. However the parameters involved in the evolution of the disease are still unknown. Among other factors, the virus-elicited antibody profile is suspected to play a role in the outcome of the disease. Analysis of the relationship between anti-virus antibodies and disease state requires the analysis of a large number of serums from patients (hepatitis C virus+) and of epitopes from the viral proteins. Such a study would benefit from microarray-based screening systems that are appropriate for high-throughput assays. We used a method combining peptide chips and surface plasmon resonance imaging previously shown to be suitable for analyzing complex mediums and detecting peptide-protein interactions. 56 peptides covering the entire viral proteome were grafted on chips and their interaction with antibodies present in the 68 injected serums from infected and non-infected donors was measured. Statistical analyses were conducted to determine a possible relationship between antibodies (specificity and amount) and disease states. A good discrimination between infected and non-infected donors validated our approach, and several correlations between antibodies profiles and clinical parameters have been identified. In particular, we demonstrated that ratios between particular antibodies levels allow for accurate discrimination of patients according to their pathologic states. CONCLUSION: Humoral response against hepatitis C virus linear epitopes is partly modified according to the disease state. This study highlights the importance of considering relative quantities of antibodies with different specificities rather than the amount of each antibody.

On-chip microbial culture for the specific detection of very low levels of bacteria.

Microbial culture continues to be the most common protocol for bacterial detection and identification in medicine and agronomics. Using this process may take days to identify a specific pathogen for most bacterial strains. Surface Plasmon Resonance (SPR) detection is an emerging alternative technology that can be used for the detection of bacteria using protein microarrays although typical limits of detection are in the range of 10(3)-10(6) cfu mL(-1), which is not compatible with most Food Safety regulation requirements. In this work, we combine concomitant "on-chip" microbial culture with sensitive SPR detection of bacteria thus allowing rapid specific detection of bacteria pathogens - including Salmonella enterica serovar Enteritidis, Streptococcus pneumoniae and Escherichia coli O157:H7 - cultured on a protein microarray. This Culture-Capture-Measure (CCM) approach significantly decreases both the number of processing steps and the overall assay time for bacterial detection. Signal analysis of SPR responses allowed the fast and quantitative assessment of bacterial concentrations initially present in the sample as low as 2.8 ± 19.6 cfu per milliliter. Altogether, our results show how simple, easy-to-operate, fluidic-less and lo-tec microarrays can be used with unprocessed samples and yield - in a single assay - both qualitative and quantitative information regarding bacterial contamination.

Temperature scans/cycles for the detection of low abundant DNA point mutations on microarrays.

The possibility to detect low abundant DNA point mutations is essential for early cancer diagnosis and/or prognosis. Furthermore, in order to be less invasive, the somatic mutations are not only sought in tumor extract samples but also from body fluids or stools rendering their content even more diluted compared to the wild type sequences. In this short communication, we propose two protocols based on temperature scans or cycles for the enrichment of the mutation strands hybridized on microarrays. We predict numerically and confirm experimentally a 10-fold increase in the fraction of mutated DNA hybridized on the microarray compared to the sample content. Coupled to more standard solution phase enrichment techniques, it would be possible to lower by one order of magnitude the current detection limit with the advantage of multiple mutation detections offered by the microarray technology.

Construction of hybrid bilayer membrane (HBM) Biochips and characterization of the cooperative binding between cytochrome-c and HBM.

We constructed multi-channel hybrid bilayer membrane (HBM) biochips and characterized them by surface plasmon resonance imaging. Each channel in the biochip was prepared using vesicles with different proportions of negative, neutral, and positive lipids. The HBM surfaces were tested by interaction with two globular proteins that recognize surfaces covered with opposite charges. Spots modified with the same HBM show responses within a relative standard deviation of 10% or smaller. These devices were also used to study in detail the interaction between cytochrome-c (cyt-c) and HBMs. Cooperative binding between cyt-c and negative HBMs was demonstrated. Using an adaptation of the Hill model, we calculated a Hill coefficient of 5 and a 10-fold increase in the binding constant with the increase in cyt-c concentration. We propose that this treatment can be used to evaluate the cooperative binding of surface proteins to membranes.

Clinically related protein-peptide interactions monitored in real time on novel peptide chips by surface plasmon resonance imaging.

BACKGROUND: Developing rapid, high-throughput assays for detecting and characterizing protein-protein interactions is a great challenge in the postgenomic era. We have developed a new method that allows parallel analysis of multiple analytes in biological fluids and is suitable for biological and medical studies. METHODS: This technology for studying peptide-antibody interactions is based on polypyrrole-peptide chips and surface plasmon resonance imaging (SPRi). We generated a chip bearing a large panel of peptide probes by successive electro-directed copolymerizations of pyrrole-peptide conjugates on a gold surface. RESULTS: We provide evidence that (a) the signal produced by antibody binding is highly specific; (b) the detected signal specifically reflects the antibody concentration of the tested solution in a dose-dependent manner; (c) this technique is appropriate for analyzing complex media such as undiluted sera, a novelty with respect to previous techniques; and (d) correlation between classic ELISA results and the SPRi signal is good (P = 0.008). We also validated this system in a medical model by detecting anti-hepatitis C antibodies in patient-derived sera. CONCLUSION: Because of its characteristics (easy preparation of the peptide chip; high-throughput, label-free, real-time detection; high specificity; and low background), this technology is suitable for screening biological samples and for large-scale studies.

New approach to writing and simultaneous reading of micropatterns: combining surface plasmon resonance imaging with scanning electrochemical microscopy (SECM).

This work establishes the compatibility of surface plasmon resonance imaging (SPR-i) with the visualization of localized electropolymerization. The "writing" of polypyrrole and polypyrrole-oligonucleotide patterns onto thin gold films is demonstrated using scanning electrochemical microcopy (SECM), while an optical method, SPR-i, simultaneously detected the formed micropatterns. The combination of these two methods, SECM/SPR-i, has the advantage of not only controlling the patterning process but also providing unique information on the micropattern formation. The influence of the pulsing time and the monomer concentration on the spot size and its characteristics has been investigated in detail using SPR-i. Fluorescence microscopy and atomic force microscopy have also been used to support the data obtained by SPR-i.

Half-integer Shapiro steps at the 0-pi crossover of a ferromagnetic Josephson junction.

We investigate the current-phase relation of S/F/S junctions near the crossover between the 0 and the pi ground states. We use Nb/CuNi/Nb junctions where this crossover is driven both by thickness and temperature. For a certain thickness a nonzero minimum of critical current is observed at the crossover temperature. We analyze this residual supercurrent by applying a high frequency excitation and observe the formation of half-integer Shapiro steps. We attribute these fractional steps to a doubling of the Josephson frequency due to a sin((2phi) current-phase relation. This phase dependence is explained by the splitting of the energy levels in the ferromagnetic exchange field.