A Combined Spectroscopic and Computational Study on the Mechanism of Iron-Catalyzed Aminofunctionalization of Olefins Using Hydroxylamine Derived N-O Reagent as the "Amino" Source and "Oxidant".

Herein, we study the mechanism of iron-catalyzed direct synthesis of unprotected aminoethers from olefins by a hydroxyl amine derived reagent using a wide range of analytical and spectroscopic techniques (Mössbauer, Electron Paramagnetic Resonance, Ultra-Violet Visible Spectroscopy, X-ray Absorption, Nuclear Resonance Vibrational Spectroscopy, and resonance Raman) along with high-level quantum chemical calculations. The hydroxyl amine derived triflic acid salt acts as the "oxidant" as well as "amino" group donor. It activates the high-spin Fe(II) (St = 2) catalyst [Fe(acac)2(H2O)2] (1) to generate a high-spin (St = 5/2) intermediate (Int I), which decays to a second intermediate (Int II) with St = 2. The analysis of spectroscopic and computational data leads to the formulation of Int I as [Fe(III)(acac)2-N-acyloxy] (an alkyl-peroxo-Fe(III) analogue). Furthermore, Int II is formed by N-O bond homolysis. However, it does not generate a high-valent Fe(IV)(NH) species (a Fe(IV)(O) analogue), but instead a high-spin Fe(III) center which is strongly antiferromagnetically coupled (J = -524 cm-1) to an iminyl radical, [Fe(III)(acac)2-NH·], giving St = 2. Though Fe(NH) complexes as isoelectronic surrogates to Fe(O) functionalities are known, detection of a high-spin Fe(III)-N-acyloxy intermediate (Int I), which undergoes N-O bond cleavage to generate the active iron-nitrogen intermediate (Int II), is unprecedented. Relative to Fe(IV)(O) centers, Int II features a weak elongated Fe-N bond which, together with the unpaired electron density along the Fe-N bond vector, helps to rationalize its propensity for N-transfer reactions onto styrenyl olefins, resulting in the overall formation of aminoethers. This study thus demonstrates the potential of utilizing the iron-coordinated nitrogen-centered radicals as powerful reactive intermediates in catalysis.

Liquid-Phase Cyclohexene Oxidation with O2 over Spray-Flame-Synthesized La1-x Srx CoO3 Perovskite Nanoparticles.

La1-x Srx CoO3 (x=0, 0.1, 0.2, 0.3, 0.4) nanoparticles were prepared by spray-flame synthesis and applied in the liquid-phase oxidation of cyclohexene with molecular O2 as oxidant under mild conditions. The catalysts were systematically characterized by state-of-the-art techniques. With increasing Sr content, the concentration of surface oxygen vacancy defects increases, which is beneficial for cyclohexene oxidation, but the surface concentration of less active Co2+ was also increased. However, Co2+ cations have a superior activity towards peroxide decomposition, which also plays an important role in cyclohexene oxidation. A Sr doping of 20 at. % was found to be the optimum in terms of activity and product selectivity. The catalyst also showed excellent reusability over three catalytic runs; this can be attributed to its highly stable particle size and morphology. Kinetic investigations revealed first-order reaction kinetics for temperatures between 60 and 100 °C and an apparent activation energy of 68 kJ mol-1 for cyclohexene oxidation. Moreover, the reaction was not affected by the applied O2 pressure in the range from 10 to 20 bar. In situ attenuated total reflection infrared spectroscopy was used to monitor the conversion of cyclohexene and the formation of reaction products including the key intermediate cyclohex-2-ene-1-hydroperoxide; spin trap electron paramagnetic resonance spectroscopy provided strong evidence for a radical reaction pathway by identifying the cyclohexenyl alkoxyl radical.

Cu(OTf)2 -Mediated Cross-Coupling of Nitriles and N-Heterocycles with Arylboronic Acids to Generate Nitrilium and Pyridinium Products*.

Metal-catalyzed C-N cross-coupling generally forms C-N bonds by reductive elimination from metal complexes bearing covalent C- and N-ligands. We have identified a Cu-mediated C-N cross-coupling that uses a dative N-ligand in the bond-forming event, which, in contrast to conventional methods, generates reactive cationic products. Mechanistic studies suggest the process operates via transmetalation of an aryl organoboron to a CuII complex bearing neutral N-ligands, such as nitriles or N-heterocycles. Subsequent generation of a putative CuIII complex enables the oxidative C-N coupling to take place, delivering nitrilium intermediates and pyridinium products. The reaction is general for a range of N(sp) and N(sp2 ) precursors and can be applied to drug synthesis and late-stage N-arylation, and the limitations in the methodology are mechanistically evidenced.

Radical C-N Borylation of Aromatic Amines Enabled by a Pyrylium Reagent.

Herein, we report a radical borylation of aromatic amines through a homolytic C(sp2 )-N bond cleavage. This method capitalizes on a simple and mild activation via a pyrylium reagent (Sc Pyry-OTf) thus priming the amino group for reactivity. The combination of terpyridine and a diboron reagent triggers a radical reaction which cleaves the C(sp2 )-N bond and forges a new C(sp2 )-B bond. The unique non-planar structure of the pyridinium intermediate, provides the necessary driving force for the aryl radical formation. The method permits borylation of a wide variety of aromatic amines indistinctively of the electronic environment.

Deoxyfluorination with CuF2 : Enabled by Using a Lewis Base Activating Group.

Deoxyfluorination is a primary method for the formation of C-F bonds. Bespoke reagents are commonly used because of issues associated with the low reactivity of metal fluorides. Reported here is the development of a simple strategy for deoxyfluorination, using first-row transition-metal fluorides, and it overcomes these limitations. Using CuF2 as an exemplar, activation of an O-alkylisourea adduct, formed in situ, allows effective nucleophilic fluoride transfer to a range of primary and secondary alcohols. Spectroscopic investigations have been used to probe the origin of the enhanced reactivity of CuF2 . The utility of the process in enabling 18 F-radiolabeling is also presented.

Modulating the frontier orbitals of L(X)Ga-substituted diphosphenes [L(X)GaP]2 (X = Cl, Br) and their facile oxidation to radical cations.

Modulating the electronic structures of main group element compounds is crucial to control their chemical reactivity. Herein we report on the synthesis, frontier orbital modulation, and one-electron oxidation of two L(X)Ga-substituted diphosphenes [L(X)GaP]2 (X = Cl 2a, Br 2b; L = HC[C(Me)N(Ar)]2, Ar = 2,6-i-Pr2C6H3). Photolysis of L(Cl)GaPCO 1 gave [L(Cl)GaP]22a, which reacted with Me3SiBr with halide exchange to [L(Br)GaP]22b. Reactions with MeNHC (MeNHC = 1,3,4,5-tetramethylimidazol-2-ylidene) gave the corresponding carbene-coordinated complexes L(X)GaPP(MeNHC)Ga(X)L (X = Cl 3a, Br 3b). DFT calculations revealed that the carbene coordination modulates the frontier orbitals (i.e. HOMO/LUMO) of diphosphenes 2a and 2b, thereby affecting the reactivity of 3a and 3b. In marked contrast to diphosphenes 2a and 2b, the cyclic voltammograms (CVs) of the carbene-coordinated complexes each show one reversible redox event at E 1/2 = -0.65 V (3a) and -0.36 V (3b), indicating their one-electron oxidation to the corresponding radical cations as was confirmed by reactions of 3a and 3b with the [FeCp2][B(C6F5)4], yielding the radical cations [L(X)GaPP(MeNHC)Ga(X)L]B(C6F5)4 (X = Cl 4a, Br 4b). The unpaired spin in 4a (79%) and 4b (80%) is mainly located at the carbene-uncoordinated phosphorus atoms as was revealed by DFT calculations and furthermore experimentally proven in reactions with n Bu3SnH, yielding the diphosphane cations [L(X)GaPHP(MeNHC)Ga(X)L]B(C6F5)4 (X = Cl 5a, Br 5b). Compounds 2-5 were fully characterized by NMR and IR spectroscopy as well as by single crystal X-ray diffraction (sc-XRD), and compounds 4a and 4b were further studied by EPR spectroscopy, while their bonding nature was investigated by DFT calculations.

Photoredox catalysis with aryl sulfonium salts enables site-selective late-stage fluorination.

Photoredox catalysis, especially in combination with transition metal catalysis, can produce redox states of transition metal catalysts to facilitate challenging bond formations that are not readily accessible in conventional redox catalysis. For arene functionalization, metallophotoredox catalysis has successfully made use of the same leaving groups as those valuable in conventional cross-coupling catalysis, such as bromide. Yet the redox potentials of common photoredox catalysts are not sufficient to reduce most aryl bromides, so synthetically useful aryl radicals are often not directly available. Therefore, the development of a distinct leaving group more appropriately matched in redox potential could enable new reactivity manifolds for metallophotoredox catalysis, especially if arylcopper(III) complexes are accessible, from which the most challenging bond-forming reactions can occur. Here we show the conceptual advantages of aryl thianthrenium salts for metallophotoredox catalysis, and their utility in site-selective late-stage aromatic fluorination.

Isolation of EPR spectra and estimation of spin-states in two-component mixtures of paramagnets.

The presence of multiple paramagnetic species can lead to overlapping electron paramagnetic resonance (EPR) signals. This complication can be a critical obstacle for the use of EPR to unravel mechanisms and aid the understanding of earth abundant metal catalysis. Furthermore, redox or spin-crossover processes can result in the simultaneous presence of metal centres in different oxidation or spin states. In this contribution, pulse EPR experiments on model systems containing discrete mixtures of Cr(i) and Cr(iii) or Cu(ii) and Mn(ii) complexes demonstrate the feasibility of the separation of the EPR spectra of these species by inversion recovery filters and the identification of the relevant spin states by transient nutation experiments. We demonstrate the isolation of component spectra and identification of spin states in a mixture of catalyst precursors. The usefulness of the approach is emphasised by monitoring the fate of the chromium species upon activation of an industrially used precatalyst system.

Comparison of Prostatic Tissue Processed by Microwave and Conventional Technique Using Morphometry.

BACKGROUND AND OBJECTIVES: Rapid processing of histopathological specimens and decreased turnaround time is important to fulfill the needs of clinicians treating sick patients, so the present study was conducted to compare the time taken and quality of sections in processing of prostatic tissue by rapid microwave and conventional techniques using morphometry. METHODS: Four to five mm thick paired prostate tissue pieces of fifty cases of prostatectomy specimens were taken. One tissue piece of the pair was processed routinely overnight by conventional tissue processing and the other by microwave processing. Time taken for processing by both conventional technique and microwave technique was noted and compared. Then, both were stained with conventional method of hematoxylin and eosin staining and examined for histological typing and grading. Morphometric study was done on slides of prostatic tissue processed by both conventional and microwave technique. RESULT: The prostatectomy specimens included both benign (86%) and malignant (14%) prostatic lesions in the age range of 46-85 years. The time taken for steps of dehydration, clearing and impregnation in microwave technique was significantly less as compared to histoprocessing done by conventional technique. Morphology, staining patterns of prostatic tissue processed within minutes by microwave technique, whether benign or malignant, were comparable to those sections which were processed in days using standard technique. CONCLUSION: Domestic microwave oven can be used for histoprocessing to accelerate the processing with preservation of morphology and is cheaper than commercially available microwave ovens and processing time was considerably reduced from days to minutes.

Role of morphometry and proliferative parameters in grading of urothelial neoplasms.

INTRODUCTION: Mean nuclear area of 10 nuclei (MNA-10), mitotic activity index (MAI) and Ki-67 are highly reproducible and can be routinely used as adjuncts to histopathological grading in classifying tumors. Assays of these biomarkers are non-invasive, rapid, easy to perform, more objective and accurate, with high sensitivity and specificity, and correlate well with tumor grade. MATERIAL AND METHODS: This study was conducted at the Department of Pathology PGIMS, Rohtak on 50 cases, of which 25 cases were high-grade, 15 low-grade, 6 Papillary Urothelial Neoplasm of Low Malignant Potentialand 4 reactive lesions as per the 2004 ISUP/WHO classification. MNA-10, MAI and Ki-67 immunoquantitation were performed on stained sections. RESULTS: The age of the patients varied from 35 to 87 years. Male: female ratio was 3.5:1. The mean MNA-10 (µm(2)) for High Grade Malignant Potential was 104.52 ±25.64 µm(2), which was significantly higher than in PUNLMP (47.64 ±10.23) and LMP (51.57 ±15.66). MAI (/10 HPF) showed an increasing trend from reactive lesions to HMP, with a mean of (3 ±1.16)/10 HPF to (21.36 ±5.31)/10 HPF respectively. Ki-67 labelling index, a proliferative marker, revealed increasing trend lowest with reactive lesions (10 ±2.83%) and highest in high grade tumors (65.96 ±14.44). Spearman's correlation showed maximum correlation between MAI and Ki-67 and the increasing grade of tumor. CONCLUSIONS: MNA-10 in combination with Ki-67 and MAI was found to be stronger than MNA-10 alone. MAI has high reproducibility in differentiating low and high grade, with simple assessment in paraffin embedded sections allowing adequate histopathological analysis and visualization of proliferating cells simultaneously. This multivariate grading model should be applied in routine grading to overcome interobserver variability and to increase reproducibility of grading.