Acridine Based Small Molecular Hole Transport Type Materials for Phosphorescent OLED Application.

Two small molecular hole-transporting type materials, namely 4-(9,9-dimethylacridin-10(9H)-yl)-N-(4-(9,9-dimethylacridin-10(9H)-yl)phenyl)-N-phenylaniline (TPA-2ACR) and 10,10'-(9-phenyl-9H-carbazole-3,6-diyl)bis(9,9-dimethyl-9,10-dihydroacridine) (PhCAR-2ACR), were designed and synthesized using a single-step Buchwald-Hartwig amination between the dimethyl acridine and triphenylamine or carbazole moieties. Both materials showed high thermal decomposition temperatures of 402 and 422 °C at 5% weight reduction for PhCAR-2ACR and TPA-2ACR, respectively. TPA-2ACR as hole-transporting material exhibited excellent current, power, and external quantum efficiencies of 55.74 cd/A, 29.28 lm/W and 21.59%, respectively. The achieved device efficiencies are much better than that of the referenced similar, 1,1-Bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC)-based device (32.53 cd/A, 18.58 lm/W and 10.6%). Moreover, phenyl carbazole-based PhCAR-2ACR showed good device characteristics when applied for host material in phosphorescent OLEDs.

Hydroxyl-PEG-Phosphonic Acid-Stabilized Superparamagnetic Manganese Oxide-Doped Iron Oxide Nanoparticles with Synergistic Effects for Dual-Mode MR Imaging.

The T1-T2 dual-mode contrast agents for magnetic resonance imaging (MRI) can generate self-complementary confirmed T2 and T1 images, hence greatly improving the reliability. Facilely synthesizing nanoparticles with the ultrasensitive contrast property remains extremely challenging in nanoscience. Moreover, uncovering the mechanism correlating the signal enhancements and chemical constituents is vital for designing novel efficient synergistically enhanced T1-T2 dual-mode MRI nanoprobes. Herein, we report a one-pot facile method to synthesize the superparamagnetic manganese oxide-doped iron oxide (Fe3O4/MnO) nanoparticles for T1-T2 dual-mode MR imaging. Under external magnetic field, the local magnetic field intensities of MnO and Fe3O4 could be simultaneously enhanced through embedding MnO into Fe3O4 nanoparticles and hence can cause synergistic T1 and T2 contrast enhancements. Moreover, a novel and facile cost-effective method for large-scale synthesis of hydroxyl-polyethylene glycol-phosphonic acid-stabilizing ligands is designed. The facile synthetic method and surface coating strategy of superparamagnetic Fe3O4/MnO nanoparticles offer an idea for the chemical design and preparation of superparamagnetic nanoparticles with ultrasensitive MRI contrast abilities for disease evaluation and treatment.

Oxadiazole-Based Highly Efficient Bipolar Fluorescent Emitters for Organic Light-Emitting Diodes.

In this study, a series of bipolar fluorescence emitters named 2DPAc-OXD, DPAc-OXD, 2PTZ-OXD and PTZ-OXD were designed and synthesized with excellent yields. The characterization of materials was investigated by using nuclear magnetic resonance (NMR) (¹H, 13C), mass spectrometry and thermogravimetric analysis (TGA). To investigate device efficiencies, two different OLED devices (Device 1, Device 2) were fabricated with two different host materials (Bepp2, DPEPO). The Device 2 with 2PTZ-OXD as fluorescent emitter exhibited excellent power and current efficiencies of 6.88 Lm/W and 10.10 cd/A, respectively. The external quantum efficiency of 2PTZ-OXD was around 3.99% for Device 2. The overall device properties of phenothiazine donor were better than acridine derivatives.

Utilizing a Spiro Core with Acridine- and Phenothiazine-Based New Hole Transporting Materials for Highly Efficient Green Phosphorescent Organic Light-Emitting Diodes.

Two new hole transporting materials, 2,7-bis(9,9-diphenylacridin-10(9H)-yl)-9,9' spirobi[fluorene] (SP1) and 2,7-di(10H-phenothiazin-10-yl)-9,9'-spirobi[fluorene] (SP2), were designed and synthesized by using the Buchwald-Hartwig coupling reaction with a high yield percentage of over 84%. Both of the materials exhibited high glass transition temperatures of over 150 °C. In order to understand the device performances, we have fabricated green phosphorescent organic light-emitting diodes (PhOLEDs) with SP1 and SP2 as hole transporting materials. Both of the materials revealed improved device properties, in particular, the SP2-based device showed excellent power (34.47 lm/W) and current (38.41 cd/A) efficiencies when compare with the 4,4'-bis(N-phenyl-1-naphthylamino)biphenyl (NPB)-based reference device (30.33 lm/W and 32.83 cd/A). The external quantum efficiency (EQE) of SP2 was 13.43%, which was higher than SP1 (13.27%) and the reference material (11.45%) with a similar device structure. The SP2 hole transporting material provides an effective charge transporting path from anode to emission layer, which is explained by the device efficiencies.

Spirobifluorene Core-Based Novel Hole Transporting Materials for Red Phosphorescence OLEDs.

Two new hole transporting materials, named HTM 1A and HTM 1B, were designed and synthesized in significant yields using the well-known Buchwald Hartwig and Suzuki cross- coupling reactions. Both materials showed higher decomposition temperatures (over 450 °C) at 5% weight reduction and HTM 1B exhibited a higher glass transition temperature of 180 °C. Red phosphorescence-based OLED devices were fabricated to analyze the device performances compared to Spiro-NPB and NPB as reference hole transporting materials. Devices consist of hole transporting material as HTM 1B showed better maximum current and power efficiencies of 16.16 cd/A and 11.17 lm/W, at the same time it revealed an improved external quantum efficiency of 13.64%. This efficiency is considerably higher than that of Spiro-NPB and NPB-based reference devices.

Novel hole transporting materials based on 4-(9H-carbazol-9-yl)triphenylamine derivatives for OLEDs.

During the past few years, organic light emitting diodes (OLEDs) have been increasingly studied due to their emerging applicability. However, some of the properties of existing OLEDs could be improved, such as their overall efficiency and durability; these aspects have been addressed in the current study. A series of novel hole-transporting materials (HTMs) 3a-c based on 4-(9H-carbazol-9-yl)triphenylamine conjugated with different carbazole or triphenylamine derivatives have been readily synthesized by Suzuki coupling reactions. The resulting compounds showed good thermal stabilities with high glass transition temperatures between 148 and 165 °C. The introduction of HTMs 3b and 3c into the standard devices ITO/HATCN/NPB/HTMs 3 (indium tin oxide/dipyrazino(2,3-f:2',3'-h)quinoxaline 2,3,6,7,10,11-hexacarbonitrile/N,N'-bis(naphthalen-1-yl)-N,N'-bis(phenyl)-benzidine/HTMs)/CBP (4,4'-Bis(N-carbazolyl)-1,1'-biphenyl): 5% Ir(ppy)3/Bphen/LiF/Al (tris[2-phenylpyridinato-C2,N]iridium(III)/4,7-diphenyl-1,10-phenanthroline/LiF/Al) resulted in significantly enhanced current, power, and external quantum efficiencies (EQE) as compared to the reference device without any layers of HTMs 3.

Synthesis of some green dopants for OLEDs based on arylamine 2,3-disubstituted bithiophene derivatives.

A series of green dopants based on 2,2-diphenylvinyl end-capped bithiophene and three different arylamine moieties (9-phenylcarbazole, triphenylamine, and N,N'-di-(p-tolyl)benzeneamine) were successfully synthesized by the Suzuki and Wittig coupling reactions. The photophysical properties of these compounds are reported. The strongest PL emitting compound with the 9-phenylcarbazole moiety has been used for fabricating an OLED device with good overall performance.

Preparation and physical properties of chitosan benzoic acid derivatives using a phosphoryl mixed anhydride system.

Direct benzoylation of the two hydroxyl groups on chitosan was achieved using a phosphoryl mixed anhydride system, derived from trifluoroacetic anhydride (TFAA), benzoic acids (BAs), and phosphoric acid (PA). The reaction is operated as a one pot process under mild conditions that does not require neither an inert atmosphere nor dry solvents. The structures of the synthesized compounds were confirmed by NMR and IR spectroscopy. Solubility tests on the products revealed that they were soluble in organic solvents such as N,N-dimethylformamide (DMF), dimethylsulfoxide (DMSO), and acetone. In the meantime, a morphological study by scanning electron microscopy (SEM) evidently indicated that the chitosan benzoates underwent significant structural changes after the benzoylation.

Effect of electrospun non-woven mats of dibutyryl chitin/poly(lactic acid) blends on wound healing in hairless mice.

The aim of this study was to examine the proliferative ability of dibutyryl chitin (DBC) on scratch wounds in HaCaT keratinocytes and to evaluate the effect of nanoporous non-woven mat (DBCNFM) on skin wound healing in hairless mice using the advantages of DBCNFM, such as high porosity and high surface area to volume. The cell spreading activity of DBC was verified through a cell spreading assay in scratched human HaCaT keratinocytes. Scratch wound experiments showed that DBC notably accelerates the spreading rate of HaCaT keratinocytes in a dose dependent manner. The molecular aspects of the healing process were also investigated by hematoxylin & eosin staining of the healed skin, displaying the degrees of reepithelialization and immunostaining on extracellular matrix synthesis and remodeling of the skin. Topical application of DBCNFM significantly reduced skin wound rank scores and increased the skin remodeling of the wounded hairless mice in a dose dependent way. Furthermore, DBCNFM notably increased the expression of the type 1 collagen and filaggrin. These results demonstrate that DBC efficiently accelerates the proliferation of HaCaT keratinocytes and DBCNFM notably increases extracellular matrix synthesis on remodeling of the skin, and these materials are a good candidate for further evaluation as an effective wound healing agent.

Improving the EMI shielding of graphene oxide (GNO)-coated glass-fiber-GNO-MA-grafted polypropylene (PP) composites and nylon 1D-2D nanocomposite foams.

The proliferation of the latest electronic gadgets and wireless communication devices can trigger electromagnetic interference (EMI), which has a detrimental impact on electronic devices and humans. Efficient EMI shielding materials are required for EMI-SE and they should be durable in external environments, lightweight, and cost-effective. GNO-coated glass-fiber-GNO-maleic anhydride-grafted polypropylene (MAPP) composite and carbon fiber-reinforced nylon 1D-2D nanocomposite foam were successfully prepared via a cost-effective thermal process. The composites were characterized using scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The PP and nylon-based composites with ∼13% filler showed maximum electrical conductivity (EC) of 878 mS cm-1 and 1381 mS cm-1, respectively. The GNO-coated glass-fiber-GNO-MAPP foam displays a maximum EMI-SE of 120.6 dB, while the nylon graphene-carbon nanotube-metal nanoplatelet foam exhibits a maximum EMI-SE of 139.1 dB in the X-band region. The GFCFFeGMAPP composite possesses a minimum thickness of 2.56 mm and blocks most incoming radiation. These are some of the highest EMI-SE values reported so far for glass fiber and nylon-based composites, and the nylon-based composite showed excellent properties compared to the glass fiber-based composite. Thus, we believe that the developed composites can be used in a wide range of real applications, such as in military vehicles, aviation, automobiles, and the packaging of electronic circuits.

Preparation and characterization of chitin benzoic acid esters.

Chitin benzoic acid esters were prepared using a phosphoryl mixed anhydride method. The products were characterized by 1H-NMR and FT-IR spectroscopy. FT-IR analysis revealed that the degree of O-acyl substitution of the products was in a range of 1.17-1.83. Morphological surface changes in the parent molecule due to the introduction of benzoic acid moieties were observed by scanning electron microscopy. The surface of the products was porous, in contrast to the sheet-shape of the parent molecules. The solubility of the products, which improved with increased degree of acid substitution, was tested in various organic solvents.

Recent Advancement of Electromagnetic Interference (EMI) Shielding of Two Dimensional (2D) MXene and Graphene Aerogel Composites.

The two Dimensional (2D) materials such as MXene and graphene, are most promising materials, as they have attractive properties and attract numerous application areas like sensors, supper capacitors, displays, wearable devices, batteries, and Electromagnetic Interference (EMI) shielding. The proliferation of wireless communication and smart electronic systems urge the world to develop light weight, flexible, cost effective EMI shielding materials. The MXene and graphene mixed with polymers, nanoparticles, carbon nanomaterial, nanowires, and ions are used to create materials with different structural features under different fabrication techniques. The aerogel based hybrid composites of MXene and graphene are critically reviewed and correlate with structure, role of size, thickness, effect of processing technique, and interfacial interaction in shielding efficiency. Further, freeze drying, pyrolysis and hydrothermal treatment is a powerful tool to create excellent EMI shielding aerogels. We present here a review of MXene and graphene with various polymers and nanomaterials and their EMI shielding performances. This will help to develop a more suitable composite for modern electronic systems.

EMI Shielding of the Hydrophobic, Flexible, Lightweight Carbonless Nano-Plate Composites.

The cost-effective spray coated composite was successfully synthesis and characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray diffraction techniques. The one step synthetic strategy was used for the synthesis of nanoplates that have a crystalline nature. The composites are amorphous and hydrophobic with micron thickness (<400 m). The maximum contact angle showed by composite is 132.65° and have wetting energy of -49.32 mN m-1, spreading coefficient -122.12 mN m-1, and work of adhesion 23.48 mN m-1. The minimum thickness of synthesized nanoplate is 3 nm while the maximum sheet resistance, resistivity, and electrical conductivity of the composites are 11.890 ohm sq-1, 0.4399 Ω.cm-1, and 8.967 S.cm-1, respectively. The cobalt nanoplate coated non-woven carbon fabric (CoFC) possesses excellent sheet resistance, hydrophobic nature, and EMI shielding efficiency of 99.99964%. The composite can block above 99.9913% of incident radiation (X band). Hence, the composite can be utilized in application areas such as medical clothes, mobile phones, automobiles, aerospace, and military equipment.

An effective utilization of MXene and its effect on electromagnetic interference shielding: flexible, free-standing and thermally conductive composite from MXene-PAT-poly(p-aminophenol)-polyaniline co-polymer.

MXene and conductive polymers are attractive candidates for electromagnetic interference shielding (EMI) applications. The MXene-PAT-conductive polymer (CP) composites were fabricated by a cost-effective spray coating technique and characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopy. A new approach has been developed for the synthesis of exfoliated MXene. The MXene-PAT-poly(p-aminophenol)-polyaniline co-polymer composite exhibited good electric conductivity (EC) of 7.813 S cm-1. The composites revealed an excellent thermal properties, which were 0.687 W (m K)-1 thermal conductivity, 2.247 J (g K)-1 heat capacity, 0.282 mm2 s-1 thermal diffusivity and 1.330 W s1/2 m-2 K-1 thermal effusivity. The composites showed 99.99% shielding efficiency and the MXene-PAT-PANI-PpAP composite (MXPATPA) had EMI shielding effectiveness of 45.18 dB at 8.2 GHz. The reduced form of MXene (r-Ti3C2T x ) increased the shielding effectiveness (SE) by 7.26% and the absorption (SEA) was greatly enhanced by the ant farm like structure. The composites possess excellent thermal and EMI SE characteristics, thus can be applied in areas, such as mobile phones, military utensils, heat-emitting electronic devices, automobiles and radars.

Synthesis of 2-substituted-6-(4H-1,2,4-triazol-4-yl)benzo[d]oxazoles as potential anticonvulsant agents.

A series of 2-substituted-6-(4H-1,2,4-triazol-4-yl)benzo[d]oxazoles were synthesized. The anticonvulsant effect and neurotoxicity of the compounds (intraperitoneally) were evaluated with the maximal electroshock (MES) test, subcutaneous pentylenetetrazole (sc-PTZ), and rotarod tests in mice. 2-Phenyl-6-(4H-1,2,4-triazol-4-yl)benzo[d]oxazole (3g) was the most active and also had the lowest toxicity. In the anti-MES potency test, it showed median effective dose (ED(50)) of 29.5 mg/kg, a median toxicity dose (TD(50)) of 285 mg/kg, and a protective index (PI) of 9.7, which is greater than the reference drug, carbamazepine, which has a PI of 6.4.

A chalcone glycoside from the fruits of Sorbus commixta Hedl.

Sorbus commixta Hedl. (Rosaceae) has been traditionally used in oriental countries for the treatment of asthma and other bronchial disorders. In this study, a chalcone glycoside was isolated from the ethyl acetate extract of the fruits of this plant. The compound was identified as neosakuranin based on the spectroscopic analysis and comparison with literature data. This is the first report of isolation of neosakuranin from Sorbus commixta.

Triazine-Acceptor-Based Green Thermally Activated Delayed Fluorescence Materials for Organic Light-Emitting Diodes.

High-efficiency thermally activated delayed fluorescence (TADF) is leading the third-generation technology of organic light-emitting diodes (OLEDs). TADF emitters are designed and synthesized using inexpensive organic donor and acceptor derivatives. TADF emitters are a potential candidate for next-generation display technology when compared with metal-complex-based phosphorescent dopants. Many studies are being conducted to enhance the external quantum efficiencies (EQEs) and photoluminescent quantum yield of green TADF devices. Blue TADF reached an EQE of over 35% with the support of suitable donor and acceptor moieties based on a suitable molecular design. The efficiencies of green TADF emitters can be improved when an appropriate molecular design is applied with an efficient device structure. The triazine acceptor has been identified as a worthy building block for green TADF emitters. Hence, we present here a review of triazine with various donor molecules and their device performances. This will help to design more suitable and efficient green TADF emitters for OLEDs.

Fabrication of Flexible, Lightweight, Magnetic Mushroom Gills and Coral-Like MXene⁻Carbon Nanotube Nanocomposites for EMI Shielding Application.

MXenes, carbon nanotubes, and nanoparticles are attractive candidates for electromagnetic interference (EMI) shielding. The composites were prepared through a filtration technique and spray coating process. The functionalization of non-woven carbon fabric is an attractive strategy. The prepared composite was characterized using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX), and Raman spectroscopy. The MXene-oxidized carbon nanotube-sodium dodecyl sulfate composite (MXCS) exhibited 50.5 dB (99.999%), and the whole nanoparticle-based composite blocked 99.99% of the electromagnetic radiation. The functionalization increased the shielding by 15.4%. The composite possessed good thermal stability, and the maximum electric conductivity achieved was 12.5 Scm-1. Thus, the composite shows excellent potential applications towards the areas such as aeronautics, mobile phones, radars, and military.

Sunlight active U3O8@ZnO nanocomposite superfast photocatalyst: synthesis, characterization and application.

Sunlight active U3O8@ZnO nanocomposite photocatalyst has been synthesized for the first time using co-precipitation method. The synthesized composite has a particle size ranging from 18 nm to 30 nm with band gap energy of 2.9 eV. The composite photocatalyst is capable of degrading methylene blue completely within 30 min under sunlight irradiation. Therefore, this superfast efficient sunlight-active photocatalyst is very useful in industrial organic waste water treatment.

Chaga mushroom (Inonotus obliquus) induces G0/G1 arrest and apoptosis in human hepatoma HepG2 cells.

AIM: To investigate the anti-proliferative and apoptotic effects of Chaga mushroom (Inonotus obliquus) water extract on human hepatoma cell lines, HepG2 and Hep3B cells. METHODS: The cytotoxicity of Chaga extract was screened by 3-[4,5-dimethylthiazol-2-yl]-2, 5-diphenyltetrazolium bromide (MTT) assay. Morphological observation, flow cytometry analysis, Western blot were employed to elucidate the cytotoxic mechanism of Chaga extract. RESULTS: HepG2 cells were more sensitive to Chaga extract than Hep3B cells, as demonstrated by markedly reduced cell viability. Chaga extract inhibited the cell growth in a dose-dependent manner, which was accompanied with G0/G1-phase arrest and apoptotic cell death. In addition, G0/G1 arrest in the cell cycle was closely associated with down-regulation of p53, pRb, p27, cyclins D1, D2, E, cyclin-dependent kinase (Cdk) 2, Cdk4, and Cdk6 expression. CONCLUSION: Chaga mushroom may provide a new therapeutic option, as a potential anticancer agent, in the treatment of hepatoma.