Steady-state monitoring of oxygen in a high-throughput organ-on-chip platform enables rapid and non-invasive assessment of drug-induced nephrotoxicity.

High-throughput, rapid and non-invasive readouts of tissue health in microfluidic kidney co-culture models would expand their capabilities for pre-clinical assessment of drug-induced nephrotoxicity. Here, we demonstrate a technique for monitoring steady state oxygen levels in PREDICT96-O2, a high-throughput organ-on-chip platform with integrated optical-based oxygen sensors, for evaluation of drug-induced nephrotoxicity in a human microfluidic co-culture model of the kidney proximal tubule (PT). Oxygen consumption measurements in PREDICT96-O2 detected dose and time-dependent injury responses of human PT cells to cisplatin, a drug with known toxic effects in the PT. The injury concentration threshold of cisplatin decreased exponentially from 19.8 µM after 1 day to 2.3 µM following a clinically relevant exposure duration of 5 days. Additionally, oxygen consumption measurements resulted in a more robust and expected dose-dependent injury response over multiple days of cisplatin exposure compared to colorimetric-based cytotoxicity readouts. The results of this study demonstrate the utility of steady state oxygen measurements as a rapid, non-invasive, and kinetic readout of drug-induced injury in high-throughput microfluidic kidney co-culture models.

A thermoplastic microfluidic microphysiological system to recapitulate hepatic function and multicellular interactions.

Hepatic in vitro platforms ranging from multi-well cultures to bioreactors and microscale systems have been developed as tools to recapitulate cellular function and responses to aid in drug screening and disease model development. Recent developments in microfabrication techniques and cellular materials enabled fabrication of next-generation, advanced microphysiological systems (MPSs) that aim to capture the cellular complexity and dynamic nature of the organ presenting highly controlled extracellular cues to cells in a physiologically relevant context. Historically, MPSs have heavily relied on elastomeric materials in their manufacture, with unfavorable material characteristics (such as lack of structural rigidity) limiting their use in high-throughput systems. Herein, we aim to create a microfluidic bilayer model (microfluidic MPS) using thermoplastic materials to allow hepatic cell stabilization and culture, retaining hepatic functional phenotype and capturing cellular interactions. The microfluidic MPS consists of two overlapping microfluidic channels separated by a porous tissue-culture membrane that acts as a surface for cellular attachment and nutrient exchange; and an oxygen permeable material to stabilize and sustain primary human hepatocyte (PHH) culture. Within the microfluidic MPS, PHHs are cultured in the top channel in a collagen sandwich gel format with media exchange accomplished through the bottom channel. We demonstrate PHH culture for 7 days, exhibiting measures of hepatocyte stabilization, secretory and metabolic functions. In addition, the microfluidic MPS dimensions provide a reduced media-to-cell ratio in comparison with multi-well tissue culture systems, minimizing dilution and enabling capture of cellular interactions and responses in a hepatocyte-Kupffer coculture model under an inflammatory stimulus. Utilization of thermoplastic materials in the model and ability to incorporate multiple hepatic cells within the system is our initial step towards the development of a thermoplastic-based high-throughput microfluidic MPS platform for hepatic culture. We envision the platform to find utility in development and interrogation of disease models of the liver, multi-cellular interactions and therapeutic responses.

Relationship Between Central Venous Catheter Protein Adsorption and Water Infused Surface Protection Mechanisms.

Central venous catheters (CVCs) are implanted in the majority of dialysis patients despite increased patient risk due to thrombotic occlusion and biofilm formation. Current solutions remain ineffective at preventing these complications and treatment options are limited and often harmful. We present further analysis of the previously proposed water infused surface protection (WISP) technology, an active method to reduce protein adsorption and effectively disrupt adsorbed protein sheaths on the inner surface of CVCs. A WISP CVC is modeled by a hollow fiber membrane (HFM) in a benchtop device which continuously infuses a saline solution across the membrane wall into the blood flow, creating a blood-free boundary layer at the lumen surface. Total protein adsorption is measured under various experimental conditions to further test WISP performance. The WISP device shows reduced protein adsorption as blood and WISP flow rates increase (P < 0.040) with up to a 96% reduction in adsorption over the no WISP condition. When heparin is added to the WISP flow, protein adsorption (0.097[+0.035/-0.055] µg/mm2 ) is reduced when compared to both bolus administration and nondoped WISP, 0.406(+0.056/-0.065) µg/mm2 (P = 0.001) and 0.191 (+0.076/-0.126) (P = 0.029), respectively. Additionally, when heparinized WISP is applied to a preadsorbed protein layer, 0.375(+0.114/-0.164) µg/mm2 , it displays the ability to reduce the previously-adsorbed protein, 0.186(+0.058/-0.084) µg/mm2 (P = 0.0012), suggesting aptitude for intermittent treatments. The WISP technology not only shows the ability to reduce protein adsorption, but also the ability to remove preadsorbed material by effectively delivering drugs to the point of adsorption; functionalities that could greatly improve clinical outcomes.

Human 3D vascularized organotypic microfluidic assays to study breast cancer cell extravasation.

A key aspect of cancer metastases is the tendency for specific cancer cells to home to defined subsets of secondary organs. Despite these known tendencies, the underlying mechanisms remain poorly understood. Here we develop a microfluidic 3D in vitro model to analyze organ-specific human breast cancer cell extravasation into bone- and muscle-mimicking microenvironments through a microvascular network concentrically wrapped with mural cells. Extravasation rates and microvasculature permeabilities were significantly different in the bone-mimicking microenvironment compared with unconditioned or myoblast containing matrices. Blocking breast cancer cell A3 adenosine receptors resulted in higher extravasation rates of cancer cells into the myoblast-containing matrices compared with untreated cells, suggesting a role for adenosine in reducing extravasation. These results demonstrate the efficacy of our model as a drug screening platform and a promising tool to investigate specific molecular pathways involved in cancer biology, with potential applications to personalized medicine.

Water Infused Surface Protection as an Active Mechanism for Fibrin Sheath Prevention in Central Venous Catheters.

Protein adhesion in central venous catheters (CVCs) leads to fibrin sheath formation, the precursor to thrombotic and biofilm-related CVC failures. Advances in material properties and surface coatings do not completely prevent fibrin sheath formation and post-formation treatment options are limited and expensive. We propose water infused surface protection (WISP), an active method for prevention of fibrin sheath formation on CVCs, which creates a blood-free boundary layer on the inner surface of the CVC, limiting blood contact with the CVC lumen wall. A hollow fiber membrane (HFM) in a benchtop device served as a CVC testing model to demonstrate the WISP concept. Porcine blood was pumped through the HFM while phosphate buffered saline (PBS) was infused through the HFM wall, creating the WISP boundary layer. Protein adherences on model CVC surfaces were measured and imaged. Analytical and finite volume lubrication models were used to justify the assumption of a blood-free boundary layer. We found a 92.2% reduction in average adherent protein density when WISP is used, compared with our model CVC without WISP flow. Lubrication models matched our experimental pressure drop measurements suggesting that a blood-free boundary layer was created. The WISP technique also provides a novel strategy for drug administration for biofilm treatment. Reduction in adherent protein indicates a restriction on long-term fibrin sheath and biofilm formation making WISP a promising technology which improves a wide range of vascular access treatments.

Three-dimensional microfluidic model for tumor cell intravasation and endothelial barrier function.

Entry of tumor cells into the blood stream is a critical step in cancer metastasis. Although significant progress has been made in visualizing tumor cell motility in vivo, the underlying mechanism of cancer cell intravasation remains largely unknown. We developed a microfluidic-based assay to recreate the tumor-vascular interface in three-dimensions, allowing for high resolution, real-time imaging, and precise quantification of endothelial barrier function. Studies are aimed at testing the hypothesis that carcinoma cell intravasation is regulated by biochemical factors from the interacting cells and cellular interactions with macrophages. We developed a method to measure spatially resolved endothelial permeability and show that signaling with macrophages via secretion of tumor necrosis factor alpha results in endothelial barrier impairment. Under these conditions intravasation rates were increased as validated with live imaging. To further investigate tumor-endothelial (TC-EC) signaling, we used highly invasive fibrosarcoma cells and quantified tumor cell migration dynamics and TC-EC interactions under control and perturbed (with tumor necrosis factor alpha) barrier conditions. We found that endothelial barrier impairment was associated with a higher number and faster dynamics of TC-EC interactions, in agreement with our carcinoma intravasation results. Taken together our results provide evidence that the endothelium poses a barrier to tumor cell intravasation that can be regulated by factors present in the tumor microenvironment.

Interstitial flow influences direction of tumor cell migration through competing mechanisms.

Interstitial flow is the convective transport of fluid through tissue extracellular matrix. This creeping fluid flow has been shown to affect the morphology and migration of cells such as fibroblasts, cancer cells, endothelial cells, and mesenchymal stem cells. A microfluidic cell culture system was designed to apply stable pressure gradients and fluid flow and allow direct visualization of transient responses of cells seeded in a 3D collagen type I scaffold. We used this system to examine the effects of interstitial flow on cancer cell morphology and migration and to extend previous studies showing that interstitial flow increases the metastatic potential of MDA-MB-435S melanoma cells [Shields J, et al. (2007) Cancer Cell 11:526-538]. Using a breast carcinoma line (MDA-MB-231) we also observed cell migration along streamlines in the presence of flow; however, we further demonstrated that the strength of the flow as well as the cell density determined directional bias of migration along the streamline. In particular, we found that cells either at high seeding density or with the CCR-7 receptor inhibited migration against, rather than with the flow. We provide further evidence that CCR7-dependent autologous chemotaxis is the mechanism that leads to migration with the flow, but also demonstrate a competing CCR7-independent mechanism that causes migration against the flow. Data from experiments investigating the effects of cell concentration, interstitial flow rate, receptor activity, and focal adhesion kinase phosphorylation support our hypothesis that the competing stimulus is integrin mediated. This mechanism may play an important role in development of metastatic disease.

Human Kidney Proximal Tubule-Microvascular Model Facilitates High-Throughput Analyses of Structural and Functional Effects of Ischemia-Reperfusion Injury.

Kidney ischemia reperfusion injury (IRI) poses a major global healthcare burden, but effective treatments remain elusive. IRI involves a complex interplay of tissue-level structural and functional changes caused by interruptions in blood and filtrate flow and reduced oxygenation. Existing in vitro models poorly replicate the in vivo injury environment and lack means of monitoring tissue function during the injury process. Here, a high-throughput human primary kidney proximal tubule (PT)-microvascular model is described, which facilitates in-depth structural and rapid functional characterization of IRI-induced changes in the tissue barrier. The PREDICT96 (P96) microfluidic platform's user-controlled fluid flow can mimic the conditions of IR to induce pronounced changes in cell structure that resemble clinical and in vivo phenotypes. High-throughput trans-epi/endo-thelial electrical resistance (TEER) sensing is applied to non-invasively track functional changes in the PT-microvascular barrier during the two-stage injury process and over repeated episodes of injury. Notably, ischemia causes an initial increase in tissue TEER followed by a sudden increase in permeability upon reperfusion, and this biphasic response occurs only with the loss of both fluid flow and oxygenation. This study demonstrates the potential of the P96 kidney IRI model to enhance understanding of IRI and fuel therapeutic development.

A high-throughput, 28-day, microfluidic model of gingival tissue inflammation and recovery.

Nearly half of American adults suffer from gum disease, including mild inflammation of gingival tissue, known as gingivitis. Currently, advances in therapeutic treatments are hampered by a lack of mechanistic understanding of disease progression in physiologically relevant vascularized tissues. To address this, we present a high-throughput microfluidic organ-on-chip model of human gingival tissue containing keratinocytes, fibroblast and endothelial cells. We show the triculture model exhibits physiological tissue structure, mucosal barrier formation, and protein biomarker expression and secretion over several weeks. Through inflammatory cytokine administration, we demonstrate the induction of inflammation measured by changes in barrier function and cytokine secretion. These states of inflammation are induced at various time points within a stable culture window, providing a robust platform for evaluation of therapeutic agents. These data reveal that the administration of specific small molecule inhibitors mitigates the inflammatory response and enables tissue recovery, providing an opportunity for identification of new therapeutic targets for gum disease with the potential to facilitate relevant preclinical drug efficacy and toxicity testing.

Fibroblast activation in response to TGFß1 is modulated by co-culture with endothelial cells in a vascular organ-on-chip platform.

Background: Tissue fibrosis is a major healthcare burden that affects various organs in the body for which no effective treatments exist. An underlying, emerging theme across organs and tissue types at early stages of fibrosis is the activation of pericytes and/or fibroblasts in the perivascular space. In hepatic tissue, it is well known that liver sinusoidal endothelial cells (EC) help maintain the quiescence of stellate cells, but whether this phenomenon holds true for other endothelial and perivascular cell types is not well studied. Methods: The goal of this work was to develop an organ-on-chip microvascular model to study the effect of EC co-culture on the activation of perivascular cells perturbed by the pro-fibrotic factor TGFß1. A high-throughput microfluidic platform, PREDICT96, that was capable of imparting physiologically relevant fluid shear stress on the cultured endothelium was utilized. Results: We first studied the activation response of several perivascular cell types and selected a cell source, human dermal fibroblasts, that exhibited medium-level activation in response to TGFß1. We also demonstrated that the PREDICT96 high flow pump triggered changes in select shear-responsive factors in human EC. We then found that the activation response of fibroblasts was significantly blunted in co-culture with EC compared to fibroblast mono-cultures. Subsequent studies with conditioned media demonstrated that EC-secreted factors play at least a partial role in suppressing the activation response. A Luminex panel and single cell RNA-sequencing study provided additional insight into potential EC-derived factors that could influence fibroblast activation. Conclusion: Overall, our findings showed that EC can reduce myofibroblast activation of perivascular cells in response to TGFß1. Further exploration of EC-derived factors as potential therapeutic targets in fibrosis is warranted.

Bioengineering Strategies to Develop Podocyte Culture Systems.

Unraveling the complex behavior of healthy and disease podocytes by analyzing the changes in their unique arrangement of foot processes, slit diaphragm, and the three-dimensional (3D) morphology is a long-standing goal in kidney-glomerular research. The complexities surrounding the podocytes' accessibility in animal models and growing evidence of differences between humans and animal systems have compelled researchers to look for alternate approaches to study podocyte behaviors. With the advent of bioengineered models, an increasingly powerful and diverse set of tools is available to develop novel podocyte culture systems. This review discusses the pertinence of various culture models of podocytes to study podocyte mechanisms in both normal physiology and disease conditions. While no one in vitro system comprehensively recapitulates podocytes' in vivo architecture, we emphasize how the existing systems can be exploited to answer targeted questions on podocyte structure and function. We highlight the distinct advantages and limitations of using these models to study podocyte behaviors and screen therapeutics. Finally, we discuss various considerations and potential engineering strategies for developing next-generation complex 3D culture models for studying podocyte behaviors in vitro. Impact Statement In various glomerular kidney diseases, there are numerous alterations in podocyte structure and function. Yet, many of these disease events and the required targeted therapies remain unknown, resulting in nonspecific treatments. The scientific and clinical communities actively search for new modes to develop structurally and functionally relevant podocyte culture systems to gain insights into various diseases and develop therapeutics. Current in vitro systems help in some ways but are not sufficient. A deeper understanding of these previous approaches is essential to advance the field, and importantly, bioengineering strategies can contribute a unique toolbox to establish next-generation podocyte systems.

Evaluation of rapid transepithelial electrical resistance (TEER) measurement as a metric of kidney toxicity in a high-throughput microfluidic culture system.

Rapid non-invasive kidney-specific readouts are essential to maximizing the potential of microfluidic tissue culture platforms for drug-induced nephrotoxicity screening. Transepithelial electrical resistance (TEER) is a well-established technique, but it has yet to be evaluated as a metric of toxicity in a kidney proximal tubule (PT) model that recapitulates the high permeability of the native tissue and is also suitable for high-throughput screening. We utilized the PREDICT96 high-throughput microfluidic platform, which has rapid TEER measurement capability and multi-flow control, to evaluate the utility of TEER sensing for detecting cisplatin-induced toxicity in a human primary PT model under both mono- and co-culture conditions as well as two levels of fluid shear stress (FSS). Changes in TEER of PT-microvascular co-cultures followed a dose-dependent trend similar to that demonstrated by lactate dehydrogenase (LDH) cytotoxicity assays and were well-correlated with tight junction coverage after cisplatin exposure. Additionally, cisplatin-induced changes in TEER were detectable prior to increases in cell death in co-cultures. PT mono-cultures had a less differentiated phenotype and were not conducive to toxicity monitoring with TEER. The results of this study demonstrate that TEER has potential as a rapid, early, and label-free indicator of toxicity in microfluidic PT-microvascular co-culture models.

Measurement of oxygen consumption rates of human renal proximal tubule cells in an array of organ-on-chip devices to monitor drug-induced metabolic shifts.

Measurement of cell metabolism in moderate-throughput to high-throughput organ-on-chip (OOC) systems would expand the range of data collected for studying drug effects or disease in physiologically relevant tissue models. However, current measurement approaches rely on fluorescent imaging or colorimetric assays that are focused on endpoints, require labels or added substrates, and lack real-time data. Here, we integrated optical-based oxygen sensors in a high-throughput OOC platform and developed an approach for monitoring cell metabolic activity in an array of membrane bilayer devices. Each membrane bilayer device supported a culture of human renal proximal tubule epithelial cells on a porous membrane suspended between two microchannels and exposed to controlled, unidirectional perfusion and physiologically relevant shear stress for several days. For the first time, we measured changes in oxygen in a membrane bilayer format and used a finite element analysis model to estimate cell oxygen consumption rates (OCRs), allowing comparison with OCRs from other cell culture systems. Finally, we demonstrated label-free detection of metabolic shifts in human renal proximal tubule cells following exposure to FCCP, a drug known for increasing cell oxygen consumption, as well as oligomycin and antimycin A, drugs known for decreasing cell oxygen consumption. The capability to measure cell OCRs and detect metabolic shifts in an array of membrane bilayer devices contained within an industry standard microtiter plate format will be valuable for analyzing flow-responsive and physiologically complex tissues during drug development and disease research.

Hot embossing for fabrication of a microfluidic 3D cell culture platform.

Clinically relevant studies of cell function in vitro require a physiologically-representative microenvironment possessing aspects such as a 3D extracellular matrix (ECM) and controlled biochemical and biophysical parameters. A polydimethylsiloxane (PDMS) microfluidic system with a 3D collagen gel has previously served for analysis of factors inducing different responses of cells in a 3D microenvironment under controlled biochemical and biophysical parameters. In the present study, applying the known commercially-viable manufacturing methods to a cyclic olefin copolymer (COC) material resulted in a microfluidic device with enhanced 3D gel capabilities, controlled surface properties, and improved potential to serve high-volume applications. Hot embossing and roller lamination molded and sealed the microfluidic device. A combination of oxygen plasma and thermal treatments enhanced the sealing, ensured proper placement of the 3D gel, and created controlled and stable surface properties within the device. Culture of cells in the new device indicated no adverse effects of the COC material or processing as compared to previous PDMS devices. The results demonstrate a methodology to transition microfluidic devices for 3D cell culture from scientific research to high-volume applications with broad clinical impact.

A microfluidic respiratory assist device with high gas permeance for artificial lung applications.

One of the principal challenges in artificial lung technology has been the ability to provide levels of oxygen and carbon dioxide exchange that rival those of the natural human lung, while mitigating the deleterious interaction between blood and the surface of the synthetic gas exchange membrane. This interaction is exacerbated by the large oxygenator surface area required to achieve sufficient levels of gas transfer. In an effort to address this challenge, microfluidics-based artificial lung technologies comprising stacked microchannel networks have been explored by several groups. Here we report the design, fabrication and initial testing of a parallel plate multilayered silicone-based microfluidic construct containing ultrathin gas exchange membranes, aimed at maximizing gas transfer efficiency while minimizing membrane-blood contact area. The device comprises a branched microvascular network that provides controlled wall shear stress and uniform blood flow, and is designed to minimize blood damage, thrombosis and inflammatory responses seen in current oxygenators. Initial testing indicates that flow distribution through the multilayer structure is uniform and that the thin membrane can withstand pressures equivalent to those expected during operation. Oxygen transfer using phosphate buffered saline as the carrier fluid has also been assessed, demonstrating a sharp increase in oxygen transfer as membrane thickness is reduced, consistent with the expected values of oxygen permeance for thin silicone membranes.

Recurrent Urinary Tract Infection: A Mystery in Search of Better Model Systems.

Urinary tract infections (UTIs) are among the most common infectious diseases worldwide but are significantly understudied. Uropathogenic E. coli (UPEC) accounts for a significant proportion of UTI, but a large number of other species can infect the urinary tract, each of which will have unique host-pathogen interactions with the bladder environment. Given the substantial economic burden of UTI and its increasing antibiotic resistance, there is an urgent need to better understand UTI pathophysiology - especially its tendency to relapse and recur. Most models developed to date use murine infection; few human-relevant models exist. Of these, the majority of in vitro UTI models have utilized cells in static culture, but UTI needs to be studied in the context of the unique aspects of the bladder's biophysical environment (e.g., tissue architecture, urine, fluid flow, and stretch). In this review, we summarize the complexities of recurrent UTI, critically assess current infection models and discuss potential improvements. More advanced human cell-based in vitro models have the potential to enable a better understanding of the etiology of UTI disease and to provide a complementary platform alongside animals for drug screening and the search for better treatments.

A high-throughput microfluidic bilayer co-culture platform to study endothelial-pericyte interactions.

Microphysiological organ-on-chip models offer the potential to improve the prediction of drug safety and efficacy through recapitulation of human physiological responses. The importance of including multiple cell types within tissue models has been well documented. However, the study of cell interactions in vitro can be limited by complexity of the tissue model and throughput of current culture systems. Here, we describe the development of a co-culture microvascular model and relevant assays in a high-throughput thermoplastic organ-on-chip platform, PREDICT96. The system consists of 96 arrayed bilayer microfluidic devices containing retinal microvascular endothelial cells and pericytes cultured on opposing sides of a microporous membrane. Compatibility of the PREDICT96 platform with a variety of quantifiable and scalable assays, including macromolecular permeability, image-based screening, Luminex, and qPCR, is demonstrated. In addition, the bilayer design of the devices allows for channel- or cell type-specific readouts, such as cytokine profiles and gene expression. The microvascular model was responsive to perturbations including barrier disruption, inflammatory stimulation, and fluid shear stress, and our results corroborated the improved robustness of co-culture over endothelial mono-cultures. We anticipate the PREDICT96 platform and adapted assays will be suitable for other complex tissues, including applications to disease models and drug discovery.

Design and construction of three-dimensional physiologically-based vascular branching networks for respiratory assist devices.

Microfluidic lab-on-a-chip devices are changing the way that in vitro diagnostics and drug development are conducted, based on the increased precision, miniaturization and efficiency of these systems relative to prior methods. However, the full potential of microfluidics as a platform for therapeutic medical devices such as extracorporeal organ support has not been realized, in part due to limitations in the ability to scale current designs and fabrication techniques toward clinically relevant rates of blood flow. Here we report on a method for designing and fabricating microfluidic devices supporting blood flow rates per layer greater than 10 mL min-1 for respiratory support applications, leveraging advances in precision machining to generate fully three-dimensional physiologically-based branching microchannel networks. The ability of precision machining to create molds with rounded features and smoothly varying channel widths and depths distinguishes the geometry of the microchannel networks described here from all previous reports of microfluidic respiratory assist devices, regarding the ability to mimic vascular blood flow patterns. These devices have been assembled and tested in the laboratory using whole bovine or porcine blood, and in a porcine model to demonstrate efficient gas transfer, blood flow and pressure stability over periods of several hours. This new approach to fabricating and scaling microfluidic devices has the potential to address wide applications in critical care for end-stage organ failure and acute illnesses stemming from respiratory viral infections, traumatic injuries and sepsis.

Correction: A high-throughput microfluidic microphysiological system (PREDICT-96) to recapitulate hepatocyte function in dynamic, re-circulating flow conditions.

Correction for 'A high-throughput microfluidic microphysiological system (PREDICT-96) to recapitulate hepatocyte function in dynamic, re-circulating flow conditions' by Kelly Tan et al., Lab Chip, 2019, 19, 1556-1566, DOI: .

Myoblast alignment and differentiation on cell culture substrates with microscale topography and model chemistries.

This paper analyzes the alignment and differentiation of myoblast cells adherent to surfaces having model chemistries and microtopographical patterns. The patterns strongly influenced cellular alignment but did not modulate expression of differentiation marker proteins in either primary or C2C12 myoblasts. Topographic patterns consisted of embossed ridges and grooves or arrays of holes, with feature sizes ranging from 5-75 microm. The topographic surfaces were prepared with a uniform self-assembled monolayer that presented CH3 molecules for fibronectin adsorption. The myoblast cell models were cultured in differentiation conditions on the substrates. For both cell models, cells aligned to grooves, with groove width modulating orientation, and preferentially orientated parallel to rows of holes. None of the patterns significantly modulated cell density or differentiation as examined through sarcomeric myosin and acetylcholine receptor expression. The results indicate that for the specific configuration examined, microscale topography modulates myoblast alignment, but does not have significant impact on cell density or differentiation.