RESUMO
Li-excess Mn-based disordered rock salt oxides (DRX) are promising Li-ion cathode materials owing to their cost-effectiveness and high theoretical capacities. It has recently been shown that Mn-rich DRX Li1+xMnyM1-x-yO2 (y ≥ 0.5, M are hypervalent ions such as Ti4+ and Nb5+) exhibit a gradual capacity increase during the first few charge-discharge cycles, which coincides with the emergence of spinel-like domains within the long-range DRX structure coined as "δ phase". Here, we systematically study the structural evolution upon heating of Mn-based DRX at different levels of delithiation to gain insight into the structural rearrangements occurring during battery cycling and the mechanism behind δ phase formation. We find in all cases that the original DRX structure relaxes to a δ phase, which in turn leads to capacity enhancement. Synchrotron X-ray and neutron diffraction were employed to examine the structure of the δ phase, revealing that selective migration of Li and Mn/Ti cations to different crystallographic sites within the DRX structure leads to the observed structural rearrangements. Additionally, we show that both Mn-rich (y ≥ 0.5) and Mn-poor (y < 0.5) DRX can thermally relax into a δ phase after delithiation, but the relaxation processes in these distinct compositions lead to different domain structures. Thermochemical studies and in situ heating XRD experiments further indicate that the structural relaxation has a larger thermodynamic driving force and a lower activation energy for Mn-rich DRX, as compared to Mn-poor systems, which underpins why this structural evolution is only observed for Mn-rich systems during battery cycling.
RESUMO
Metal-organic framework (MOF) composite materials containing ionic liquids (ILs) have been proposed for a range of potential applications, including gas separation, ion conduction, and hybrid glass formation. Here, an order transition in an IL@MOF composite is discovered using CuBTC (copper benzene-1,3,5-tricarboxylate) and [EMIM][TFSI] (1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide). This transition - absent for the bare MOF or IL - provides an extended super-cooling range and latent heat at a capacity similar to that of soft paraffins, in the temperature range of ≈220 °C. Structural analysis and in situ monitoring indicate an electrostatic interaction between the IL molecules and the Cu paddle-wheels, leading to a decrease in pore symmetry at low temperature. These interactions are reversibly released above the transition temperature, which reflects in a volume expansion of the MOF-IL composite.
RESUMO
Scheelite-type metal oxides are a notable class of functional materials, with applications including ionic conductivity, photocatalysis, and the safe storage of radioactive waste. To further engineer these materials for specific applications, a detailed understanding of how their properties can change under different conditions is requiredânot just in the long-range average structure but also in the short-range local structure. This paper outlines a detailed investigation of the metal oxide CsReO4, which exhibits an uncommon orthorhombic Pnma pseudo-scheelite-type structure at room temperature. Using synchrotron X-ray diffraction, the average structure of CsReO4 is found to undergo a transformation from the orthorhombic Pnma pseudo-scheelite-type structure to the tetragonal I41/a scheelite-type structure at â¼440 K. In the X-ray pair distribution function analysis, lattice strain and rotations of the ReO4 tetrahedra are apparent above 440 K despite the increase in long-range average symmetry, revealing a disconnect between the structural models at different length scales. This study demonstrates how the bonding requirements and ionic radii of the A-site cation can induce disorder that is detectable at different length scales, affecting the physical properties of the material.
RESUMO
Pair distribution function (PDF) analysis of the scheelite-type material PbWO4 reveals previously unidentified short-range structural distortions in the PbO8 polyhedra and WO4 tetrahedra not observed in the similarly structured CaWO4. These local distortions are a result of the structural influence of the Pb2+ 6s2 lone pair electrons. These are not evident from the Rietveld analysis of synchrotron X-ray or neutron powder diffraction data, nor do they strongly influence the X-ray PDF (XPDF). This illustrates the importance of neutron PDF (NPDF) in the study of such materials. First-principles density function theory (DFT) calculations show that the Pb2+ 6s2 electrons are hybridized with the O2- 2p electrons near the Fermi level. The presence of local-scale distortions has previously been neglected in studies of structure-functionality relationships in PbWO4 and other scheelite-structured photocatalytic materials, including BiVO4, and this observation opens new avenues for their optimization.
RESUMO
Noncovalent interactions are essential in the formation and properties of a diverse range of materials. However, reliably identifying noncovalent interactions remains challenging using conventional methods such as X-ray diffraction, especially in nanocrystalline, poorly crystalline or amorphous materials which lack long-range lattice periodicity. Here, we demonstrate the accurate determination of deviations in the local structure and tilting of aromatic rings during the temperature-induced first order structural transition in the 1 : 1 adduct of 4,4'-bipyridinium squarate (BIPY:SQA) from the low temperature form HAZFAP01 to high temperature HAZFAP07 by X-ray pair distribution function. This work demonstrates how pair distribution function analyses can improve our understanding of local structural deviations resulting from noncovalent bonds and guide the development of novel functional materials.
RESUMO
Oxides exhibiting the scheelite-type structure are an important class of functional materials with notable applications in photocatalysis, luminescence, and ionic conductivity. Like all materials, understanding their atomic structure is fundamental to engineering their physical properties. This study outlines a detailed structural investigation of the scheelite-type oxide RbReO4, which exhibits a rare long-range phase transition from I41/a to I41/amd upon heating. Additionally, in the long-range I41/a model, the Re-O tetrahedral distance undergoes significant contraction upon warming. Recent studies of other scheelite oxides have attributed this apparent contraction to incoherent local-scale tetrahedral rotations. In this study, we use X-ray pair distribution function analysis to show that RbReO4 undergoes a unique symmetry-lowering process on the local scale, which involves incoherent tetrahedral displacements. The rare I41/a to I41/amd long-range phase transition was found to occur via a change from static to dynamic disorder on the local scale, which is due to the combination of the size of the A-site cation and lattice expansion. This demonstrates how careful manipulation of the ionic radius of the A-site in the scheelite structure can be used to induce local-scale disorder, which has valuable implications for tailoring the physical properties of related materials.
RESUMO
Copper and zinc form an important group of hydroxycarbonate minerals that include zincian malachite, aurichalcite, rosasite and the exceptionally rare and unstable--and hence little known and largely ignored--georgeite. The first three of these minerals are widely used as catalyst precursors for the industrially important methanol-synthesis and low-temperature water-gas shift (LTS) reactions, with the choice of precursor phase strongly influencing the activity of the final catalyst. The preferred phase is usually zincian malachite. This is prepared by a co-precipitation method that involves the transient formation of georgeite; with few exceptions it uses sodium carbonate as the carbonate source, but this also introduces sodium ions--a potential catalyst poison. Here we show that supercritical antisolvent (SAS) precipitation using carbon dioxide (refs 13, 14), a process that exploits the high diffusion rates and solvation power of supercritical carbon dioxide to rapidly expand and supersaturate solutions, can be used to prepare copper/zinc hydroxycarbonate precursors with low sodium content. These include stable georgeite, which we find to be a precursor to highly active methanol-synthesis and superior LTS catalysts. Our findings highlight the value of advanced synthesis methods in accessing unusual mineral phases, and show that there is room for exploring improvements to established industrial catalysts.
RESUMO
Hard carbons are the leading candidate anode materials for sodium-ion batteries. However, the sodium-insertion mechanisms remain under debate. Here, employing a novel analysis of operando and ex situ pair distribution function (PDF) analysis of total scattering data, supplemented by information on the local electronic structure provided by operando 23Na solid-state NMR, we identify the local atomic environments of sodium stored within hard carbon and provide a revised mechanism for sodium storage. The local structure of carbons is well-described by bilayers of curved graphene fragments, with fragment size increasing, and curvature decreasing with increasing pyrolysis temperature. A correlation is observed between the higher-voltage (slope) capacity and the defect concentration inferred from the size and curvature of the fragments. Meanwhile, a larger lower-voltage (plateau) capacity is observed in samples modeled by larger fragment sizes. Operando PDF data on two commercially relevant hard carbons reveal changes at higher-voltages consistent with sodium ions stored close to defective areas of the carbon, with electrons localized in the antibonding π*-orbitals of the carbon. Metallic sodium clusters approximately 13-15 Å in diameter are formed in both carbons at lower voltages, implying that, for these carbons, the lower-voltage capacity is determined by the number of regions suitable for sodium cluster formation, rather than by having microstructures that allow larger clusters to form. Our results reveal that local atomic structure has a definitive role in determining storage capacity, and therefore the effect of synthetic conditions on both the local atomic structure and the microstructure should be considered when engineering hard carbons.
RESUMO
The synthesis of four novel crystalline zeolitic imidazolate framework (ZIF) structures using a mixed-ligand approach is reported. The inclusion of both imidazolate and halogenated benzimidazolate-derived linkers leads to glass-forming behavior by all four structures. Melting temperatures are observed to depend on both electronic and steric effects. Solid-state NMR and terahertz (THz)/far-IR demonstrate the presence of a Zn-F bond for fluorinated ZIF glasses. In situ THz/far-IR spectroscopic techniques reveal the dynamic structural properties of crystal, glass, and liquid phases of the halogenated ZIFs, linking the melting behavior of ZIFs to the propensity of the ZnN4 tetrahedra to undergo thermally induced deformation. The inclusion of halogenated ligands within metal-organic framework (MOF) glasses improves their gas-uptake properties.
RESUMO
In situ electrochemical cycling combined with total scattering measurements can provide valuable structural information on crystalline, semi-crystalline and amorphous phases present during (dis)charging of batteries. In situ measurements are particularly challenging for total scattering experiments due to the requirement for low, constant and reproducible backgrounds. Poor cell design can introduce artefacts into the total scattering data or cause inhomogeneous electrochemical cycling, leading to poor data quality or misleading results. This work presents a new cell design optimized to provide good electrochemical performance while performing bulk multi-scale characterizations based on total scattering and pair distribution function methods, and with potential for techniques such as X-ray Raman spectroscopy. As an example, the structural changes of a nanostructured high-capacity cathode with a disordered rock-salt structure and composition Li4Mn2O5 are demonstrated. The results show that there is no contribution to the recorded signal from other cell components, and a very low and consistent contribution from the cell background.
RESUMO
In situ studies on the physical and chemical properties of Au in inverse ceria alumina supported catalysts have been conducted between 295 and 623 K using high energy resolved fluorescence detection X-ray absorption near edge spectroscopy and X-ray total scattering. Precise structural information is extracted on the metallic Au phase present in a 0.85 wt% Au containing inverse ceria alumina catalyst (ceria/Au/alumina). Herein evidence for the formation of an Au hydride species at elevated temperature is presented. Through modelling of total scattering data to extract the thermal properties of Au using Grüneisen theory of volumetric thermal expansion it proposed that the Au Hydride formation occurs synergistally with the formation of a cerium oxyhydride. The temperature reversible nature, whilst remaining in a reducing atmosphere, demonstrates the activation of hydrogen without consumption of oxygen from the supporting ceria lattice.
RESUMO
Metal-organic framework crystal-glass composites (MOF-CGCs) are materials in which a crystalline MOF is dispersed within a MOF glass. In this work, we explore the room-temperature stabilization of the open-pore form of MIL-53(Al), usually observed at high temperature, which occurs upon encapsulation within a ZIF-62(Zn) MOF glass matrix. A series of MOF-CGCs containing different loadings of MIL-53(Al) were synthesized and characterized using X-ray diffraction and nuclear magnetic resonance spectroscopy. An upper limit of MIL-53(Al) that can be stabilized in the composite was determined for the first time. The nanostructure of the composites was probed using pair distribution function analysis and scanning transmission electron microscopy. Notably, the distribution and integrity of the crystalline component in a sample series were determined, and these findings were related to the MOF-CGC gas adsorption capacity in order to identify the optimal loading necessary for maximum CO2 sorption capacity.
RESUMO
The Diamond Light Source (DLS) beamline I15-1 measures atomic pair distribution functions (PDF) using scattering of 40-80 keV X-rays. A unique focusing element was needed to condense these X-rays from an initial large cross section (11.0 mm H × 4.2 mm V) into a required spot size of FWHM ≈680 µm (H) × 20 µm (V) at a variable position between the sample and the detector. The large numerical aperture is achieved by coating a silicon substrate over 1 m long with three multilayer stripes of Bragg angle 4.2 mrad. One stripe selects X-rays of each energy 40.0, 65.4, and 76.6 keV. Sixteen piezoelectric bimorph actuators attached to the sides of the mirror substrate adjusted the reflecting surface's shape. Focal spots of vertical width < 15 µm were obtained at three positions over a 0.92 m range, with fast, easy switching from one focal position to another. Minimized root mean square slope errors were close to 0.5 µrad after subtraction of a uniform curvature. Reflectivity curves taken along each stripe showed consistent high peaks with generally small angular variation of peak positions. This is the first application of a 1 m long multilayer-coated bimorph mirror at a synchrotron beamline. Data collected with its help on a slice of a lithium ion battery's cathode are presented.
RESUMO
Materials with the apatite structure have a range of important applications in which their function is influenced by details of their local structure. Here, we describe an average and local structural study to probe the origins of high-temperature oxide ion mobility in La10(GeO4)6O3 and La8Bi2(GeO4)6O3 oxygen-excess materials, using the low-conductivity interstitial oxide-free La8Sr2(GeO4)6O2 as a benchmark. For La10 and La8Bi2, we locate the interstitial oxygen, Oint, responsible for conductivity by Rietveld refinement and relate the P63/m to P1Ì phase transitions on cooling to oxygen ordering. Local structural studies using neutron total scattering reveal that well-ordered GeO5 square pyramidal groups form in the structure at low temperature, but that Oint becomes significantly more disordered in the high-conductivity, high-temperature structures, with a transition to more trigonal-bipyramid-like average geometry. We relate the higher conductivity of Bi materials to the presence of several Oint sites of similar energy in the structure, which correlates with its less-distorted low-temperature average structure.
RESUMO
Uranium is typically the most abundant radionuclide by mass in radioactive wastes and is a significant component of effluent streams at nuclear facilities. Actinide(IV) (An(IV)) colloids formed via various pathways, including corrosion of spent nuclear fuel, have the potential to greatly enhance the mobility of poorly soluble An(IV) forms, including uranium. This is particularly important in conditions relevant to decommissioning of nuclear facilities and the geological disposal of radioactive waste. Previous studies have suggested that silicate could stabilize U(IV) colloids. Here the formation, composition, and structure of U(IV)-silicate colloids under the alkaline conditions relevant to spent nuclear fuel storage and disposal were investigated using a range of state of the art techniques. The colloids are formed across a range of pH conditions (9-10.5) and silicate concentrations (2-4 mM) and have a primary particle size 1-10 nm, also forming suspended aggregates <220 nm. X-ray absorption spectroscopy, ultrafiltration, and scanning transmission electron microscopy confirm the particles are U(IV)-silicates. Additional evidence from X-ray diffraction and pair distribution function data suggests the primary particles are composed of a UO2-rich core and a U-silicate shell. U(IV)-silicate colloids formation correlates with the formation of U(OH)3(H3SiO4)32- complexes in solution indicating they are likely particle precursors. Finally, these colloids form under a range of conditions relevant to nuclear fuel storage and geological disposal of radioactive waste and represent a potential pathway for U mobility in these systems.
Assuntos
Resíduos Radioativos , Urânio , Poluentes Radioativos da Água , Coloides , SilicatosRESUMO
In this work, we explore the thermodynamic evolution in a melt-quenched metal-organic framework glass, formed from ZIF-62 upon heating to the melting point (Tm), and subsequent enthalpy relaxation. The temperature dependence of the difference in Gibbs free energy between the liquid and crystal states of ZIF-62 in the temperature range from the glass transition temperature (Tg) to Tm is found to be weaker than those of other types of glasses, e.g., metallic glasses. Additionally, we find that the stretched exponent of the enthalpy relaxation function in the glass varies significantly (ß = 0.44-0.76) upon changing the extent of sub-Tg annealing, compared to metallic and oxide glasses with similar Tgs, suggesting a high degree of structural heterogeneity. Pair distribution function results suggest no significant structural changes during the sub-Tg relaxation in ZIF-62 glass.
RESUMO
The thermal transformation of the tetragonal-zircon (tz-) to tetragonal-scheelite (ts-)BiVO4 was studied by inâ situ synchrotron X-ray diffraction, thermogravimetric analysis, and Fourier-transformed infrared spectroscopy. Upon heating, the tetragonal zircon polymorph of BiVO4 (tz-BiVO4) transitioned to the ts-polymorph between 693-773â K. Above 773â K, single phase ts-BiVO4 was observed before transitioning to the monoclinic fergusonite (mf-) polymorph upon cooling. An anomaly in thermal expansion was observed between 400-500â K, associated with the loss of intercalated H2O/NH4 + from the coprecipitation procedure. Heating tz-BiVO4 resulted in contraction of the V-O bond distance and VO4 polyhedra volume, ascribed to rotation of the tetrahedra groups. Attempts to study this by neutron diffraction failed due to the large incoherent scatter from the hydrogenous species. Efforts to remove these species while maintaining the tz-BiVO4 structure were unsuccessful, suggesting they play a role in stabilizing the tz-polymorph. The local structure of both mf-BiVO4 and tz-BiVO4 were investigated by X-ray pair distribution function analysis, revealing local distortions.
RESUMO
Complex transition-metal oxides are important functional materials in areas such as energy and information storage. The cubic ABO3 perovskite is an archetypal example of this class, formed by the occupation of small octahedral B-sites within an AO3 network defined by larger A cations. We show that introduction of chemically mismatched octahedral cations into a cubic perovskite oxide parent phase modifies structure and composition beyond the unit cell length scale on the B sublattice alone. This affords an endotaxial nanocomposite of two cubic perovskite phases with distinct properties. These locally B-site cation-ordered and -disordered phases share a single AO3 network and have enhanced stability against the formation of a competing hexagonal structure over the single-phase parent. Synergic integration of the distinct properties of these phases by the coherent interfaces of the composite produces solid oxide fuel cell cathode performance superior to that expected from the component phases in isolation.
RESUMO
NiO:Li is an early exemplar for which hole-doping of a correlated insulator gives rise to rich and varied magnetic behavior. It is also an important system from the viewpoint of p-type transparent conducting oxides, and is representative of a large class of materials that have been used in lithium ion batteries, since the end-member compound, LiNiO2 , belongs to the class of layered cathode materials. Despite the deceptive structural and compositional simplicity of this system, a complete understanding of its complex magnetic properties has remained elusive. Here a comprehensive investigation of the solid solution Lix Ni2-x O2 , examining samples of precise stoichiometry using a combination of high-resolution synchrotron X-ray powder diffraction and SQUID magnetometry, is provided. The focus is on the interesting region between 0.40
RESUMO
Liquid metals such as eutectic Ga-In alloys have low melting points and low toxicity and are used in catalysis and micro-robotics. This study investigates the local atomic structure of liquid gallium-indium alloys by a combination of density measurements, diffraction data, and Monte-Carlo simulation via the empirical potential structure refinement approach. A high-Q shoulder observed in liquid Ga is related to structural rearrangements in the second coordination shell. Structure analysis found coordination environments close to a random distribution for eutectic Ga-In alloy, while electronic effects appear to dominate the mixing enthalpy.