RESUMO
INTRODUCTION: The pharmaceutical industry involves handling of powders on a large scale for manufacturing of solid dosage forms such as tablets and capsules constituting about 85% of the dosage forms. During this manufacturing process, powders get electrostatically charged due to numerous particle-particle and particle-equipment wall collisions. Most of the pharmaceutical powders are insulators in nature and they accumulate charge for longer durations making it difficult to dissipate the generated charge. In this study, a surface modified blender has been used to analyze tribocharging in pharmaceutical powders. METHODS: The surface modified blender has been fabricated using two types of materials, an insulator, and a conductor. The conductor or the metal arm induces charge of opposite polarity to that of the charge induced by the insulator arm and the overall charge on the powder decreases during the tumbling motion of the blender. Ibuprofen was used as the model drug and processed in aluminum, polyvinyl chloride (PVC), stainless steel, surface modified aluminum-PVC (Al-PVC) and surface modified stainless steel- PVC (SS-PVC) blender at 20% RH for different blending times such as 2, 10, 20, 30 and 40 min. To better understand the tribocharging phenomenon in surface modified V blenders, an experimentally validated computational model was developed using Discrete Element Method (DEM) modeling. RESULTS: Significant reduction (> 50%) in electrostatic charge was observed for Ibuprofen using surface modified blenders in comparison to metal only and insulator only V blenders. Additionally, an identical charging trend was observed between the simulation and experimental data. CONCLUSION: It was established that careful selection of equipment materials could significantly reduce the electrostatic charging of pharmaceutical powders and DEM model could be a really useful tool in assessing the applicability of the modified V blenders.
Assuntos
Alumínio , Ibuprofeno , Pós , Aço Inoxidável , Eletricidade Estática , Tecnologia Farmacêutica/métodosRESUMO
A continuous manufacturing technology based on coaxial turbulent jet in coflow was previously developed to produce paclitaxel-loaded polymeric micelles. Herein, coarse-grained molecular dynamics (CG-MD) simulations were implemented to better understand the effect of the material attributes (i.e., the drug-polymer ratio and the ethanol concentration) and process parameters (i.e., temperature) on the self-assembly process of polymeric micelles as well as to provide molecular details on micelle instability. An all-atom (AA) poly (ethylene glycol)-poly (lactic acid) (PEG-PLA) polymer model was developed as the reference for parameterizing a coarse-grained (CG) model, and the AA polymer model was further validated with experimental glass transition temperature (Tg). The model transferability was verified by comparing structural properties between the AA and CG models. The CG model was further validated with experimental data, including micelle particle size measurements and drug encapsulation efficiency. Furthermore, the encapsulation of paclitaxel into the polymeric micelles was included in the simulations, taking into consideration the interactions between the paclitaxel and the polymers. The results from various points of view demonstrated a strong dependence of the shape of the micelles on the drug encapsulation, with micelles transitioning from spherical to ellipsoidal structures with an increasing paclitaxel amount. Simulation data were also used to identify the critical aggregation number (i.e., the number of polymer and drug molecules required for transition from one shape to another). Improved micellar structural stability was found with a larger micellar size and less solvent accessibility. Lastly, an evaluation was performed on the micellar dissociation free energy using a steered molecular dynamics simulation over a range of temperatures and ethanol concentrations. These simulations revealed that at higher ethanol and temperature conditions, micelles become destabilized, resulting in greater paclitaxel release. The increased drug release was determined to originate from the solvation of the hydrophobic core, which promoted micellar swelling and an associated reduction in hydrophobic interactions, leading to a loosely packed micellar structure.
Assuntos
Micelas , Paclitaxel , Liberação Controlada de Fármacos , Simulação de Dinâmica Molecular , Paclitaxel/química , Polietilenoglicóis/química , Polímeros/químicaRESUMO
PURPOSE: The stability of protein drug products frozen during fill finish operations is greatly affected by the freezing rate applied. Non-optimal freezing rates may lead to the denaturation of protein's complex macromolecular conformation. However, limited work has been done to address the effect of different freezing rates on protein stability at nano-scale level. METHODS: The stability of a model protein, lysozyme, was investigated at atomic and molecular scale under varying freezing rates and moving ice-water interface. Ice seeding approach was adopted to initiate ice formation in this present simulation. RESULTS: The faster freezing rate (11-12 K/490 ns) applied resulted in overall smaller ice fraction within the simulation box with a larger freeze-concentrated liquid (FCL) region. Consequently, the faster freezing rate better maintained protein stability with less secondary structure deviations, higher hydration level and structural compactness, and less fluctuations at individual residues than observed following slow (5-6 K/490 ns) and medium (7-8 K/490 ns) freezing rates. The present study also identified the residues near and within helices 3, 6, 7, and 8 dominate the structural instability of the lysozyme at 247 K freezing temperature. CONCLUSIONS: For the first time, ice formation in therapeutic protein solution was studied "non-isothermally" at different freezing rates using molecular dynamics simulations. Thus, a good understanding of freezing rates on protein instability was revealed by applying the developed computational model.
Assuntos
Gelo , Simulação de Dinâmica Molecular , Congelamento , Muramidase , Proteínas/química , Água/químicaRESUMO
Fluidized bed dryer often used in the pharmaceutical industry for drying of wet granules. Coupled computational fluid dynamics (CFD) - discrete element method (DEM) is frequently used to model the drying process because of its ability to obtain the relevant information at the particle level. However, it becomes almost impossible to model the industrial scale fluidized bed dryer using the coupled CFD-DEM method because of the presence of large number of particles [Formula: see text]. To reduce the number of particles to be tracked in the simulation, coarse grained coupled CFD-DEM method was developed by researchers where a certain number of particles of the original system was represented by a relatively bigger particle in the coarse-grained system. The appropriate scaling of the particle-particle and particle-fluid interaction forces is necessary to make sure that the dynamics of the coarse-grained particles/parcels accurately represent the dynamics of the original particles. The coarse-graining of the drying process of pharmaceutical granules during fluidization needs systematic coarse-graining of the momentum, heat, and solvent vapor transfer process. A coarse grained coupled CFD-DEM method was used to model the momentum and heat transfer during the fluidization of pharmaceutical granules. It was shown that the heat transfer during the fluidization of large number of particles could be predicted by simulating a smaller number of bigger particles with appropriate scaling of particle-particle heat and momentum transfer, and particle-fluid heat and momentum transfer at significantly smaller computational time. This model can be further extended by including a coarse-grained moisture transport model in future.
Assuntos
Temperatura Alta , Hidrodinâmica , Tamanho da Partícula , Preparações Farmacêuticas , SolventesRESUMO
Drying of wet granules in a fluidized bed dryer is an important part of the pharmaceutical tablet manufacturing process. Complicated gas-solid flow patterns appear in the fluidized bed dryer, and interphase momentum, heat, and mass transfer happen during the drying process. A coupled computational fluid dynamics (CFD)-discrete element method (DEM)-based approach was used to model the drying process of pharmaceutical wet granules in a fluidized bed dryer. The evaporation of water from the surfaces of the particles and the cohesion force between the particles due to the formation of liquid bridges between the particles were also considered in this model. The model was validated by comparing the model predictions with the experimental data available from the literatures. The validated model was used to investigate the drying kinetics of the wet granules in the fluidized bed dryer. The results from numerical simulations showed that the dynamics and rate of increase of temperature of wet particles were considerably different from those of dry particles. Finally, the model was used to investigate the effects of inlet air velocity and inlet air temperature on the drying process. The model predicted increase in drying rate with the increase of inlet air velocity and inlet air temperature. This model can help not only to understand the multiphase multicomponent flow in fluidized bed dryer but also to optimize the drying process in the fluidized bed dryer.
Assuntos
Dessecação , Hidrodinâmica , Simulação por Computador , Comprimidos , TemperaturaRESUMO
Large volumes of protein solutions are commonly stored in a frozen state before further drug product fill and finish. This study aimed to establish a design space to perform large-scale freeze-thaw (F/T) processes of biotherapeutics without inducing protein destabilization. A response surface model was designed to evaluate the following main factors and interactions: fill volume of the protein solution in 1-L containers, distance among nine containers during both F/T, freezer set temperature, and a novel forced air flow methodology during thawing. The analysis from 46 experimental runs indicated over 4-fold increase in the freezing rate by lowering the freezing temperature from -20 to -80°C, and the forced air flow at 98 fpm doubled the thawing rate. Furthermore, multivariate linear regression modeling revealed the significant impact of all main factors investigated on lactate dehydrogenase (LDH) quality attributes. The factor that most strongly affected the retention of LDH activity was the loading distance: ≥ 5 cm among containers positively affected the LDH activity response in 50.6%. The factor that most strongly retained the LDH tetramers was the set freezer temperature towards the lower range of -80°C (2.2% higher tetramer retention compared to -20°C freezing, due to faster freezing rate). In summary, this DoE-based systematic analysis increased F/T process understanding at large scale, identified critical F/T process parameters, and confirmed the feasibility of applying faster freezing and forced air thawing procedures to maintain the stability of LDH solutions subject to large-scale F/T.
Assuntos
Produtos Biológicos/síntese química , Química Farmacêutica/métodos , Congelamento , L-Lactato Desidrogenase/síntese química , Animais , Produtos Biológicos/metabolismo , L-Lactato Desidrogenase/metabolismo , Coelhos , Projetos de PesquisaRESUMO
FDA-approved self-emulsifying medicines rely on liquid-based formulations, which can exhibit limited stability and short shelf-lives. Solid self-emulsifying drug delivery systems (SEDDS) can improve such issues, but there is still a great need for identifying suitable porous carriers to convert liquid SEDDS into solids without impairing their mechanical properties, functionality, and industrial feasibility. The impact of SEDDS adsorption on tableting is also poorly understood. Therefore, solid SEDDS were prepared by adsorbing liquid SEDDS onto ten commercially available porous excipients. Products were assessed with respect to mechanical behavior, tabletability, and product performance. Adsorbing SEDDS onto porous excipients led to satisfactory stability, with the exception of Zeopharm® 600 due to its high alkalinity, and Neusilin® US2/UFL2, which caused quercetin to crystallize out of the liquid concentrate. SEDDS adsorption reduced the elastic recovery of most excipients, making tableting achievable using Aeroperl® 300 and Aerosil® 200/300. The impact of SEDDS on elastic recovery provides additional understanding on solid SEDDS manufacture process. Acceptable tablets were made via direct compression but with slow disintegration. Addition of a superdisintegrant (crospovidone 5% w/w) ensured tablet manufacturing without impairment of product performance. Solid SEDDS displayed several technical advantages over their liquid counterparts, but attention must be given to the properties of the porous excipient chosen. Drug-excipient interactions play a significant role in drug degradation and crystallization in solid SEDDS. Improved mechanical behavior upon adsorption led to well-composed tablets that performed satisfactorily in vitro upon addition of a superdisintegrant. This study provides an insight on excipient-oriented rational development of solid SEDDS.
Assuntos
Sistemas de Liberação de Medicamentos/métodos , Emulsificantes/química , Excipientes/química , Adsorção/efeitos dos fármacos , Adsorção/fisiologia , Composição de Medicamentos/métodos , Emulsificantes/administração & dosagem , Excipientes/administração & dosagem , Porosidade , Dióxido de Silício/administração & dosagem , Dióxido de Silício/química , Solubilidade , ComprimidosRESUMO
Pulmonary delivery of cohesive and micronized drugs through dry powder inhalers (DPIs) is traditionally achieved through the formation of ordered mixtures. In order to improve the mechanistic understanding of formation of ordered mixtures, the system consisting of micronized lactose (AZFL, representative of an active pharmaceutical ingredient) and a coarse particle carrier (LH100) is investigated as a function of different process and material variables in a high shear mixer (HSM) and in a low shear double cone (DCN) blender, using both experimental and numerical methods. Process insight is developed using a Discrete Element Method (DEM) based numerical model which could predict the formation of ordered mixtures in the two blenders and was verified against experimental determinations. Spatial and temporal evolution of granular flow are visualized and quantified in silico to reveal distinguishing features of both blenders to aid in rational selection of blenders and process parameters.
Assuntos
Inaladores de Pó Seco , Lactose/química , Química Farmacêutica , Portadores de Fármacos , Modelos TeóricosRESUMO
A method of producing liposomes has been previously developed using a continuous manufacturing technology that involves a co-axial turbulent jet in co-flow. In this study, coarse-grained molecular dynamics (CG-MD) simulations were used to gain a deeper understanding of how the self-assembly process of liposomes is affected by the material attributes (such as the concentration of ethanol) and the process parameters (such as temperature), while also providing detailed information on a nano-scale molecular level. Specifically, the CG-MD simulations yield a comprehensive internal view of the structure and formation mechanisms of liposomes containing DPPC, DPPG, and cholesterol molecules. The importance of this work is that structural details on the molecular level are proposed, and such detail is not possible to obtain through experimental studies alone. The assessment of structural properties, including the area per lipid, diffusion coefficient, and order parameters, indicated that a thicker bilayer was observed at higher ethanol concentrations, while a thinner bilayer was present at higher temperatures. These conditions led to more water penetrating the interior of the bilayer and an unstable structure, as indicated by a larger contact area between lipids and water, and a higher coefficient of lipid lateral diffusion. However, stable liposomes were found through these evaluations at lower ethanol concentrations and/or lower process temperatures. Furthermore, the CG-MD model was further compared and validated with experimental and computational data including liposomal bilayer thickness and area per lipid measurements.
Assuntos
Química Farmacêutica , Lipossomos , Simulação de Dinâmica Molecular , Lipossomos/síntese química , Tamanho da Partícula , Temperatura , Etanol/química , Água/química , Lipídeos/química , Química Farmacêutica/métodosRESUMO
The aggregation of adeno-associated viral (AAV) capsids in an aqueous environment was investigated via coarse-grained molecular dynamics (CG-MD) simulations. The primary driving force and mechanism of the aggregation were investigated with or without single-strand DNA (ssDNA) loaded at various process temperatures. Capsid aggregation appeared to involve multiple residue interactions (i.e., hydrophobic, polar and charged residues) leading to complex protein aggregation. In addition, two aggregation mechanisms (i.e., the fivefold face-to-face contact and the edge-to-edge contact) were identified from this study. The ssDNA with its asymmetric structure could be the reason for destabilizing protein subunits and enhancing the interaction between the charged residues, and further result in the non-reversible face-to-face contact. At higher temperature, the capsid structure was found to be unstable with the significant size expansion of the loaded ssDNA which could be attributed to reduced number of intramolecular hydrogen bonds, the increased conformational deviations of protein subunits and the higher residue fluctuations. The CG-MD model was further validated with previous experimental and simulation data, including the full capsid size measurement and the capsid internal pressure. Thus, a good understanding of AAV capsid aggregation, instability and the role of ssDNA were revealed by applying the developed computational model.
Assuntos
Dependovirus , Simulação de Dinâmica Molecular , Subunidades Proteicas , DNA de Cadeia Simples , CapsídeoRESUMO
Interest in 3D printing has been growing rapidly especially in pharmaceutical industry due to its multiple advantages such as manufacturing versatility, personalization of medicine, scalability, and cost effectiveness. Inkjet based 3D printing gained special attention after FDA's approval of Spritam® manufactured by Aprecia pharmaceuticals in 2015. The precision and printing efficiency of 3D printing is strongly influenced by the dynamics of ink/binder jetting, which further depends on the ink's fluid properties. In this study, Computational Fluid Dynamics (CFD) has been utilized to study the drop formation process during inkjet-based 3D printing for piezoelectric and thermal printhead geometries using Volume of Fluid (VOF) method. To develop the CFD model commercial software ANSYS-Fluent was used. The developed CFD model was experimentally validated using drop watcher setup to record drop progression and drop velocity. During the study, water, Fujifilm model fluid, and Amitriptyline drug solutions were evaluated as the ink solutions. The drop properties such as drop volume, drop diameter, and drop velocity were examined in detail in response to change ink solution properties such as surface tension, viscosity, and density. A good agreement was observed between the experimental and simulation data for drop properties such as drop volume and drop velocity.
Assuntos
Hidrodinâmica , Tinta , Impressão Tridimensional , Comprimidos , Tecnologia Farmacêutica , Viscosidade , Tecnologia Farmacêutica/métodos , Amitriptilina/química , Simulação por Computador , Tensão SuperficialRESUMO
Although bulk biotherapeutics are often frozen during fill finish and shipping to improve their stability, they can undergo degradation leading to losses in biological activity during sub-optimal freeze-thaw (F/T) process. Except for a few small-scale studies, the relative contribution of various F/T stresses to the instability of proteins has not been addressed. Thus, the objective of this study was to determine the individual contributions of freeze-concentration, ice surface area, and processing time to protein destabilization at a practical manufacturing-scale. Lactate dehydrogenase (LDH) in histidine buffer solutions were frozen in 1L containers. The frozen solutions were sliced into representative samples and assessed for the ice specific surface area (SSA) and extent of solutes freeze-concentration. For the first time to our knowledge, ice SSA was measured in dried samples from large-volume protein solutions using volumetric nitrogen adsorption isotherms. SSA measurements of the freeze-dried cakes showed that the ice surface area increased with an increase in the freezing rate. The ice SSA was also impacted by the position of the sample within the container: samples closer to the active cooled surface of the container exhibited smaller ice surface area compared to ice-cored samples from the center of the bottle. The freeze-concentrate composition was determined by measuring LDH concentration in the ice-cored samples. The protein distributed more evenly throughout the frozen solution after fast freezing which also correlated with enhanced protein stability compared to slow freezing conditions. Overall, better protein stability parameters correlated with higher ice SSA and lower freeze-concentration extent which was achieved at a faster freezing rate. Thus, extended residence time of the protein at the freeze-concentrated microenvironment is the critical destabilizing factor during freezing of LDH in bulk histidine buffer system. This study expands the understanding of the relative contributions of freezing stresses which, coupled with the knowledge of cryoprotection mechanisms, is imperative to the development of optimized processes and formulations aiming stable frozen protein solutions.
Assuntos
Gelo , L-Lactato Desidrogenase , Congelamento , L-Lactato Desidrogenase/metabolismo , Histidina , ProteínasRESUMO
Gamma peptide nucleic acids (γPNAs) have recently garnered attention in diverse therapeutic and diagnostic applications. Serine and diethylene-glycol-containing γPNAs have been tested for numerous RNA-targeting purposes. Here, we comprehensively evaluated the in vitro and in vivo efficacy of pH-low insertion peptide (pHLIP)-conjugated serine and diethylene-based γPNAs. pHLIP targets only the acidic tumor microenvironment and not the normal cells. We synthesized and parallelly tested pHLIP-serine γPNAs and pHLIP-diethylene glycol γPNAs that target the seed region of microRNA-155, a microRNA that is upregulated in various cancers. We performed an all-atom molecular dynamics simulation-based computational study to elucidate the interaction of pHLIP-γPNA constructs with the lipid bilayer. We also determined the biodistribution and efficacy of the pHLIP constructs in the U2932-derived xenograft model. Overall, we established that the pHLIP-serine γPNAs show superior results in vivo compared with the pHLIP-diethylene glycol-based γPNA.
RESUMO
The additive nature and versatility of 3D printing show great promise in the rapid prototyping of solid dosage forms for clinical trials and mass customization for personalized medicine applications. This paper reports the formulation and process development of sustained release solid dosage forms, termed "printlets", using a pilot-scale binder jetting (BJT) 3D printer and acetaminophen (APAP) as the model drug. With the inclusion of hydroxypropyl methylcellulose (HPMC) as a release retardant polymer in the print powder, the drug release time of APAP increased considerably from minutes to hours. However, given the swelling propensity of HPMC, a thicker layer of powder must be laid down during printing to avoid any shape distortion of the printlets. For a fixed print volume, the level of binder saturation (i.e., ratio between the liquid binder and powder in the as-printed sample) is inversely proportional to the thickness of the spread powder layer. An increase in the spread powder layer inadvertently resulted in a lower level of binder saturation and consequently weaker printlets. By increasing the level of binder saturation with jetting from more print heads, the mechanical strength of printlets containing 18% HPMC was successfully restored. The resultant printlets have a drug release time of 3.5 h and a breaking force of 12.5 kgf that is comparable to the fast-disintegrating printlets containing no HPMC and surpasses manually pressed tablets with the same HPMC content.
Assuntos
Acetaminofen , Tecnologia Farmacêutica , Tecnologia Farmacêutica/métodos , Preparações de Ação Retardada , Pós , Impressão Tridimensional , Comprimidos , Excipientes , Derivados da Hipromelose , Liberação Controlada de FármacosRESUMO
This review provides a comprehensive record of experimental and modeling approaches that can be used to study the effect of critical process parameters affecting the coating uniformity in pharmaceutical coating operation. Explicit reference is given to the development of the approach and its previous usage with particular emphasis on the advantages, limitations and model assumptions.
Assuntos
Composição de Medicamentos/instrumentação , Comprimidos com Revestimento Entérico/química , Simulação por Computador , Composição de Medicamentos/métodos , Desenho de Equipamento , Modelos Químicos , Análise EspectralRESUMO
The fluidized bed is an essential and standard equipment in the field of process development. It has a wide application in various areas and has been extensively studied. This review paper aims to discuss computational modeling of a fluidized bed with a focus on pharmaceutical applications. Eulerian, Lagrangian, and combined Eulerian-Lagrangian models have been studied for fluid bed applications with the rise of modeling capabilities. Such models assist in optimizing the process parameters and expedite the process development cycle. This paper discusses the background of modeling and then summarizes research papers relevant to pharmaceutical unit operations.
Assuntos
Simulação por Computador , Preparações FarmacêuticasRESUMO
Triboelectric charging is defined as the phenomenon of charge transfer between two different material surfaces when they are brought into contact and separated. The focus of this research is the development of a Discrete Element Method (DEM) based simulation model to predict tribocharging during hopper discharge. Due to decreased particle-wall interactions and reduced particle wall contact times, net charges generated during hopper discharge are low. The simulation model confirmed this effect and was implemented to predict the triboelectric behavior of glass beads and MCC particles during hopper flow, along with the prediction of percent charged and uncharged particles. Approximately one-third of the particles were predicted to remain uncharged during the hopper discharge simulations for mono-dispersed particles, thus rendering a comparatively high amount of charge distribution into a small concentration of materials. The DEM model acted as a tool to predict charges that can be generated during hopper discharge at a specified geometry, with a potential to mitigate particle charging, when used for appropriate selection of hopper angles, and hopper wall materials.
Assuntos
Alta do Paciente , Simulação por Computador , Humanos , PósRESUMO
Pharmaceutical applications of the 3D printing process have recently matured, followed by the FDA approval of Spritam, the first commercial 3D printed dosage form. Due to being a new technology in the conventional dosage formulation field, there is still a dearth of understanding in the 3D printing process regarding the effect of the raw materials on the printed dosage forms and the plausibility of using this technology in dosage development beyond the conventional ways. In this review, the powder-based binder jet 3D printing (BJ3DP) process and its pharmaceutical applications have been discussed, along with a perspective of the formulation development step. The recent applications of BJ3DP in pharmaceutical dosage development, the advantages, and limitations have further been discussed here. A discussion of the critical formulation parameters that need to be explored for the preformulation study of the solid oral dosage development using the BJ3DP process is also presented.
Assuntos
Excipientes/química , Pós/química , Impressão Tridimensional , Tecnologia Farmacêutica/métodosRESUMO
Freezing is a common process applied in the pharmaceutical industry to store and transport biotherapeutics. Herewith, multi-scale molecular dynamics simulations of Lactate dehydrogenase (LDH) protein in phosphate buffer with/without ice formation performed to uncover the still poorly understood mechanisms and molecular details of protein destabilization upon freezing. Both fast and slow ice growing conditions were simulated at 243 K from one or two-side of the simulation box, respectively. The rate of ice formation at all-atom simulations was crucial to LDH stability, as faster freezing rates resulted in enhanced structural stability maintained by a higher number of intramolecular hydrogen bonds, less flexible protein's residues, lower solvent accessibility and greater structural compactness. Further, protein aggregation investigated by coarse-grained simulations was verified to be initiated by extended protein structures and retained by electrostatic interactions of the salt bridges between charged residues and hydrogen bonds between polar residues of the protein. Lastly, the study of free energy of dissociation through steered molecular dynamics simulation revealed LDH was destabilized by the solvation of the hydrophobic core and the loss of hydrophobic interactions. For the first time, experimentally validated molecular simulations revealed the detailed mechanisms of LDH destabilization upon ice formation and cryoconcentration of solutes.