A Rapid Total Bacteria Count Method for Food Samples using Syringe Filters and Lectin-Conjugated Semiconductor Nanorods.

Total bacteria count in food is one of important food safety criteria. The current plate count method (Heterotrophic Plate Count) for food analysis requires microbiology lab facilities and at least 2 days turnover time. We developed a rapid fluorescence-based total bacteria count method that utilises semiconductor nanorods (SNRs) conjugated with a lectin Griffonia simplicifolia II (GSII-SNRs) to stain bacterial cells captured on syringe filters, via the common N-acetylglucosamine molecules on bacterial cell wall.  This "Filter-and-Stain" detection method has a rapid turnover time of 20 min. The fluorescence emission can be seen under UV light with minimum interference from food sample background. The fluorescence intensity quantified through image analysis is proportional to the bacteria concentration with a limit of detection of 1000 CFU/mL, for total bacteria count assessment in food safety. Moreover, the GSII-SNRs do not bind to heat inactivated bacteria cells, and thus can differentiate live and dead bacteria. Our method has been validated with representative food (coffee powder, raw spinach leaves, and ready-to-eat tomato salsa) to demonstrate its high potential for on-site food safety assessment, especially in places with no immediate access to microbiology labs.

4D-Printed Hydrogel Actuators through Diffusion-Path Architecture Design.

Recently, smart hydrogels have garnered considerable attention as biomedical devices, and several approaches have been introduced for their fabrication, including the incorporation of stimulus-responsive additives, utilization of molecular imprinting techniques, and application of multilayered hydrogels. However, the nonuniform properties resulting from these approaches limit the practical applications of hydrogels by causing inconsistent performance and behavior. In this study, we propose a novel approach to manipulating the swelling kinetics of hydrogels by engineering their diffusion-path architecture. By simply adjusting the diffusion path length within the hydrogel, we achieved a significant change in swelling kinetics. This approach enables precise control over the diffusion and transport processes within the hydrogel, resulting in enhanced swelling kinetics when reducing the diffusion path length. Furthermore, by strategically designing the diffusion-path architecture of a 3D-printed hydrogel specimen, we can fabricate smart hydrogel actuators that exhibit reversible shape transformations during swelling and deswelling through a nonequilibrium differential swelling. The proposed approach eliminates the need to modify the spatial properties of hydrogel structures such as cross-linking density, polymer, or additive compositions, thereby achieving uniform properties throughout the hydrogel and creating new possibilities for the development of advanced 4D-printed biomedical devices.

A rapid total bacterial count method using gold nanoparticles conjugated with an aptamer for water quality assessment.

Total bacterial count is a routine parameter in microbial safety assessment used in many fields, such as drinking water and industrial water testing. The current gold standard method for counting bacteria is the plate culture method (or heterotrophic plate count) that requires a microbiology laboratory and a long turnover time of at least 24 hours. To tackle these shortcomings, we developed a rapid total bacterial count method that relies on gold nanoparticles (AuNPs) conjugated with affinity ligands to stain bacterial cells captured on a syringe filter. Two affinity ligands were exploited, i.e. a DNA aptamer (AB2) and a lectin Griffonia simplicifolia II (GSII) that recognize bacterial cell wall commonalities, i.e. peptidoglycan and its amino sugars. Upon proper formulation with addition of a surfactant, the AB2 conjugated AuNPs (AB2-AuNPs) can selectively stain bacterial cells captured on the filter membrane with a higher sensitivity than GSII-AuNPs. Measuring the staining intensity using an in-house-built handheld detector allowed us to correlate its intensity reading with the total number of bacterial units present. This bacteria quantification method, referred to as "Filter-and-Stain", had an efficient turnover time of 20 min suggesting its potential usage for rapid on-site applications. Additionally, the detection sensitivity provided by the AB2-AuNP nanoreagent offered a limit of detection as low as 100 CFU mL-1. We have demonstrated the use of the AB2-AuNPs for detection of bacteria from environmental water samples.

Toughened Hydrogels for 3D Printing of Soft Auxetic Structures.

Materials with negative Poisson's ratio have attracted considerable attention and offered high potential applications as biomedical devices due to their ability to expand in every direction when stretched. Although negative Poisson's ratio has been obtained in various base materials such as metals and polymers, there are very limited works on hydrogels due to their intrinsic brittleness. Herein, we report the use of methacrylated cellulose nanocrystals (CNCMAs) as a macro-cross-linking agent in poly(2-hydroxyethyl methacrylate) (pHEMA) hydrogels for 3D printing of auxetic structures. Our developed CNCMA-pHEMA hydrogels exhibit significant improvements in mechanical properties, which is attributed to the coexistence of multiple chemical and physical interactions between the pHEMA and CNCMAs. Structures printed by using CNCMA-pHEMA hydrogels show auxetic behavior with greatly enhanced toughness and stretchability compared to the hydrogel with a traditional cross-linking agent. Such strong and tough auxetic hydrogels would contribute toward establishing advanced flexible implantable devices such as biodegradable oesophageal self-expandable stents.

Hofmeister Effect Mediated Strong PHEMA-Gelatin Hydrogel Actuator.

Hydrogels have become popular in biomedical applications, but their applications in muscle and tendon-like bioactuators have been hindered by low toughness and elastic modulus. Recently, a significant toughness enhancement of a single hydrogel network has been successfully achieved by the Hofmeister effect. However, little has been conducted for the Hofmeister effect on the hybrid hydrogels, although they have a special network structure consisting of two types of polymer components. Herein we fabricated hybrid poly(2-hydroxyethyl methacrylate) (PHEMA)-gelatin hydrogels with high mechanical performance and stimuli response. An ideal bicontinuous phase separation structure of the PHEMA (rigid) and gelatin (ductile) was observed with embedded microdisc-like gelatin in the three-dimensional polymeric network of PHEMA. A significant enhancement of mechanical performance by the Hofmeister effect was attributed to the salting-out-induced stronger and closer interphase interaction between PHEMA and gelatin. A superior comprehensive mechanical performance with fracture elongation over 650%, tensile strength of 5.2 MPa, toughness of 13.5 MJ/m3, and modulus of 45.6 MPa was achieved with the salting-out effect. More specifically, the synergy of phase separation and Hofmeister effect enable the hydrogel to contract with an enhanced modulus in high-concentration salt solutions, while the same hydrogel swells and relaxes in dilute solutions, exhibiting an ionic stimulus response and excellent shape-memory properties like those of most artificial muscle. This is manifested in highly stretched, twisted, and knotted hydrogel strips that can rapidly recover their original shape in a dilute salt solution. The high strength and modulus, ionic stimuli response, and shape memory property make the hybrid hydrogel a promising material for bioactuators in various biomedical applications.

Biocompatible Peptide-Coated Ultrasmall Superparamagnetic Iron Oxide Nanoparticles for In Vivo Contrast-Enhanced Magnetic Resonance Imaging.

The biocompatibility and performance of reagents for in vivo contrast-enhanced magnetic resonance imaging (MRI) are essential for their translation to the clinic. The quality of the surface coating of nanoparticle-based MRI contrast agents, such as ultrasmall superparamagnetic iron oxide nanoparticles (USPIONs), is critical to ensure high colloidal stability in biological environments, improved magnetic performance, and dispersion in circulatory fluids and tissues. Herein, we report the design of a library of 21 peptides and ligands and identify highly stable self-assembled monolayers on the USPIONs' surface. A total of 86 different peptide-coated USPIONs are prepared and selected using several stringent criteria, such as stability against electrolyte-induced aggregation in physiological conditions, prevention of nonspecific binding to cells, and absence of cellular toxicity and contrast-enhanced in vivo MRI. The bisphosphorylated peptide 2PG-S*VVVT-PEG4-ol provides the highest biocompatibility and performance for USPIONs, with no detectable toxicity or adhesion to live cells. The 2PG-S*VVVT-PEG4-ol-coated USPIONs show enhanced magnetic resonance properties, r1 (2.4 mM-1·s-1) and r2 (217.8 mM-1·s-1) relaxivities, and greater r2/ r1 relaxivity ratios (>90) when compared to those of commercially available MRI contrast agents. Furthermore, we demonstrate the utility of 2PG-S*VVVT-PEG4-ol-coated USPIONs as a T2 contrast agent for in vivo MRI applications. High contrast enhancement of the liver is achieved as well as detection of liver tumors, with significant improvement of the contrast-to-noise ratio of tumor-to-liver contrast. It is envisaged that the reported peptide-coated USPIONs have the potential to allow for the specific targeting of tumors and hence early detection of cancer by MRI.