Stability-limiting heterointerfaces of perovskite photovoltaics.

Optoelectronic devices consist of heterointerfaces formed between dissimilar semiconducting materials. The relative energy-level alignment between contacting semiconductors determinately affects the heterointerface charge injection and extraction dynamics. For perovskite solar cells (PSCs), the heterointerface between the top perovskite surface and a charge-transporting material is often treated for defect passivation1-4 to improve the PSC stability and performance. However, such surface treatments can also affect the heterointerface energetics1. Here we show that surface treatments may induce a negative work function shift (that is, more n-type), which activates halide migration to aggravate PSC instability. Therefore, despite the beneficial effects of surface passivation, this detrimental side effect limits the maximum stability improvement attainable for PSCs treated in this way. This trade-off between the beneficial and detrimental effects should guide further work on improving PSC stability via surface treatments.

High-Performance Organic Photovoltaics Incorporating an Active Layer with a Few Nanometer-Thick Third-Component Layer on a Binary Blend Layer.

In this paper, a universal approach toward constructing a new bilayer device architecture, a few-nanometer-thick third-component layer on a bulk-heterojunction (BHJ) binary blend layer, has been demonstrated in two different state-of-the-art organic photovoltaic (OPV) systems. Through a careful selection of a third component, the power conversion efficiency (PCE) of the device based on PM6/Y6/layered PTQ10 layered third-component structure was 16.8%, being higher than those of corresponding devices incorporating the PM6/Y6/PTQ10 BHJ ternary blend (16.1%) and the PM6/Y6 BHJ binary blend (15.5%). Also, the device featuring PM7/Y1-4F/layered PTQ10 layered third-component structure gave a PCE of 15.2%, which is higher than the PCEs of the devices incorporating the PM7/Y1-4F/PTQ10 BHJ ternary blend and the PM7/Y1-4F BHJ binary blend (14.2 and 14.0%, respectively). These enhancements in PCE based on layered third-component structure can be attributed to improvements in the charge separation and charge collection abilities. This simple concept of the layered third-component structure appears to have great promise for achieving high-performance OPVs.

The combined inhibition of the CaMKIIδ and calcineurin signaling cascade attenuates IGF-IIR-induced cardiac hypertrophy.

Cardiac hypertrophy is a common phenomenon observed in progressive heart disease associated with heart failure. Insulin-like growth factor receptor II (IGF-IIR) has been much implicated in myocardial hypertrophy. Our previous studies have found that increased activities of signaling mediators, such as calcium/calmodulin-dependent protein kinase II (CaMKII) and calcineurin induces pathological hypertrophy. Given the critical roles played by CaMKII and calcineurin signaling in the progression of maladaptive hypertrophy, we anticipated that inhibition of CaMKII and calcineurin signaling may attenuate IGF-IIR-induced cardiac hypertrophy. The current study, therefore, investigated the effects of IGF-IIR activation on the CaMKII and calcineurin signaling and whether the combinatorial inhibition of the CaMKIIδ and calcineurin signaling could ameliorate IGF-IIR-induced pathological hypertrophy. In the present study, we induced IGF-IIR through the cardiomyocyte-specific transduction of IGFIIY27L via adeno-associated virus 2 (AAV2) to evaluate its effects on cardiac hypertrophy. Interestingly, it was observed that the activation of IGF-IIR signaling through IGFIIY27L induces significant hypertrophy of the myocardium and increased cardiac apoptosis and fibrosis. Moreover, we found that Leu27 IGF-II significantly induced calcineurin and CaMKII expression. Furthermore and importantly, the combinatorial treatment with CaMKII and calcineurin inhibitors significantly alleviates IGF-IIR-induced hypertrophic responses. Thus, it could be envisaged that the inhibition of IGF-IIR may serve as a promising candidate for attenuating maladaptive hypertrophy. Both calcineurin and CaMKII could be valuable targets for developing treatment strategies against hypertension-induced cardiomyopathies.

Realizing Efficient Charge/Energy Transfer and Charge Extraction in Fullerene-Free Organic Photovoltaics via a Versatile Third Component.

Solution-processed organic photovoltaics (OPVs) based on bulk-heterojunctions have gained significant attention to alleviate the increasing demend of fossil fuel in the past two decades. OPVs combined of a wide bandgap polymer donor and a narrow bandgap nonfullerene acceptor show potential to achieve high performance. However, there are still two reasons to limit the OPVs performance. One, although this combination can expand from the ultraviolet to the near-infrared region, the overall external quantum efficiency of the device suffers low values. The other one is the low open-circuit voltage (VOC) of devices resulting from the relatively downshifted lowest unoccupied molecular orbital (LUMO) of the narrow bandgap. Herein, the approach to select and incorporate a versatile third component into the active layer is reported. A third component with a bandgap larger than that of the acceptor, and absorption spectra and LUMO levels lying within that of the donor and acceptor, is demonstrated to be effective to conquer these issues. As a result, the power conversion efficiencies (PCEs) are enhanced by the elevated short-circuit current and VOC; the champion PCEs are 11.1% and 13.1% for PTB7-Th:IEICO-4F based and PBDB-T:Y1 based solar cells, respectively.

The Drosophila GOLPH3 homolog regulates the biosynthesis of heparan sulfate proteoglycans by modulating the retrograde trafficking of exostosins.

The exostosin (EXT) genes encode glycosyltransferases required for glycosaminoglycan chain polymerization in the biosynthesis of heparan sulfate proteoglycans (HSPGs). Mutations in the tumor suppressor genes EXT1 and EXT2 disturb HSPG biosynthesis and cause multiple osteochondroma (MO). How EXT1 and EXT2 traffic within the Golgi complex is not clear. Here, we show that Rotini (Rti), the Drosophila GOLPH3, regulates the retrograde trafficking of EXTs. A reduction in Rti shifts the steady-state distribution of EXTs to the trans-Golgi. These accumulated EXTs tend to be degraded and their re-entrance towards the route for polymerizing GAG chains is disengaged. Conversely, EXTs are mislocalized towards the transitional endoplasmic reticulum/cis-Golgi when Rti is overexpressed. Both loss of function and overexpression of rti result in incomplete HSPGs and perturb Hedgehog signaling. Consistent with Drosophila, GOLPH3 modulates the dynamic retention and protein stability of EXT1/2 in mammalian species. Our data demonstrate that GOLPH3 modulates the activities of EXTs, thus implicating a putative role for GOLPH3 in the formation of MO.

Synthesis of 2-Alkenyl-2H-indazoles from 2-(2-Carbonylmethyl)-2H-indazoles.

A procedure has been developed for synthesis of 2-alkenyl-2H-indazoles starting from 2-(2-carbonylmethyl)-2H-indazoles, which are prepared by gallium/aluminium- and aluminium-mediated, direct, regioselective alkylation of indazoles with α-bromocarbonyl compounds. The structure of 3-(2H-indazol-2-yl)-2H-chromen-2-one was proven by X-ray crystallography. The styrene- and coumarin-2H-indazoles produced by using the new method were found to have interesting fluorescence properties.

Synthesis of hexahydro-1H-isoindole derivatives from arylacyl bromides via homoallenic bromohydrins.

A procedure has been developed for the concise synthesis of hexahydro-1H-isoindole derivatives starting from phenacyl bromides. The approach employs a sequence involving an initial indium-mediated allenylation reaction of an arylacyl bromide with propargyl bromide. This process is followed by FeBr3-mediated SN2'-type substitution reaction of the formed homoallenic bromohydrin to produce a 2,5-dibromo-4-aryl-1,3-pentadiene, which then is subjected to a sequential, one-pot N-alkylation reaction with N-allyl-N-(p-tosyl)amine and a highly diastereoselective intramolecular Diels-Alder reaction of the formed ene-diene to generate the target hexahydro-1H-isoindole.

Preconditioning renoprotective effect of isoflurane in a rat model of virtual renal transplant.

BACKGROUND: The development of warm-cold ischemia-reperfusion (IR) injury of the kidney grafts is inevitable during renal transplantation. However, there is currently no definite renoprotective strategy available in the protection of the graft tissue. In the present study, we compared the renal protection of preconditioning isoflurane with N-acetylcysteine (NAC) in a novel rat model of warm-cold renal IR injury. MATERIALS AND METHODS: Adult Sprague-Dawley rats were randomly assigned to receive inhaled isoflurane (1.5% for 2 h), NAC (1 g/kg, intra-arterial injection) or placebo before the induction of brief warm ischemia (10 min) followed by cold ischemia (45 min) periods. Plasma levels of creatinine and tissue inflammatory reaction in the kidney were analyzed 72 h after reperfusion. RESULTS: Elevated plasma level of creatinine and urea indicated the development of acute renal injury secondary to IR injury. The creatinine levels were reduced in animals pretreated with inhaled isoflurane and NAC, and the level was more significantly decreased in the isoflurane-treated group. Preconditioning with volatile isoflurane also significantly suppressed the tissue myeloperoxidase activity and expression of the inducible nitric oxide synthase. Immunostaining confirmed that myeloperoxidase expression was most significantly attenuated in the glomerulus and peritubular capillaries of rats pre-exposed to isoflurane. CONCLUSIONS: We present the first study demonstrating that the administration of volatile isoflurane before induction of experimental warm-cold renal IR injury provides preconditioning renoprotective effect, which is superior to the treatment with NAC. The beneficial renoprotective effect of isoflurane is most likely mediated by attenuation of proinflammatory reaction in the injured kidney.

Formation and mechanics of fire ant rafts as an active self-healing membrane.

The unique ability of fire ants to form a raft to survive flooding rain has enchanted biologists as well as researchers in other disciplines. It was established during the last decade that a three-dimensional aggregation of fire ants exhibits viscoelasticity with respect to external compression and shearing among numerous unusual mechanical properties. Continuing these works, we will study the ant raft in its natural form, i.e., composing no more than two layers. This allowed us to focus on the cracks that are unique to membranes and see how their patterns are influenced by the fact that these ants are mobile and can self-repair the damage to keep their raft from disintegration. In the beginning, we show that vertical and horizontal shaking can also prompt fire ants to aggregate. The canonical view that the stability of ant raft relies on the Cheerios effect and a combination of other parameters is tested. The force-displacement experiment is performed to show that two distinct mechanical responses and fracture patterns, characteristic of ductile and brittle materials, can be elicited, depending on the magnitude of the pull speed. During the process, we counted the number of ants that actively participated in the stress-strain relation and used this information to roughly sketch out the force chain. The latter information reveals that the pull force expedites the alignment of fire ants, in analogy to the effect of an electric field on liquid crystal polymers. To highlight the self-healing nature, we employ the creep experiment to study how the length and Young's modulus of the raft change or relax with time. One major finding is that the raft can exhibit zero Poisson's ratio without resorting to specific geometry structures. This is enabled by the active recruitment of ants from the top layer to the bottom layer to keep the raft from disintegrating.

High-Performance Poly(3-hexyl thiophene)-Based Organic Photovoltaics with Side-Chain Engineering of Core Units of Small Molecule Acceptors.

In this study, we synthesized a series of four large-band gap small molecule acceptors with side-chain engineering of the dithieno-pyrrolo-fused pentacyclic benzotriazole (BZTTP or Y1 core) or the fused-ring dithienothiophene-pyrrolobenzothiadiazole (TPBT or Y6 core) with difluoro-indene-dione (IO2F) or dichloro-indene-dione (IO2Cl) end groups to form Y1-IO2F, Y1-IO2Cl, Y6-IO2F, and Y6-IO2Cl acceptors, respectively, for blending with poly(3-hexyl thiophene) (P3HT) for bulk heterojunction organic photovoltaics. The complementary UV-vis absorption spectra of these small molecules and P3HT along with their offset energy bands allow broad absorption and effective electron transfer. Through synchrotron wide-angle X-ray scattering (WAXS) analyses and contact angle measurements, we found that the blend of the small molecule Y6-IO2F (having a TPBT core) and P3HT achieves an optimum morphology that balances their crystallinity and miscibility, among those of these four blends, leading to a substantial enhancement in the short-circuit current density and thus power conversion efficiency (PCE) in their devices. For example, the P3HT:Y6-IO2F (w/w: 1/1.2) device exhibited a champion PCE of 10.5% with a short current density (Jsc) value of 15.9 mA/cm2 as compared to the P3HT:Y1-IO2F device having a PCE of 2.2% with a Jsc value of 5.7 mA/cm2 because of the higher Y6-IO2F (with TPBT core) molecular packing that facilitated carrier transport in the devices. The enhanced thermal stability exhibited by the devices incorporating Y6-IO2F and Y6-IO2Cl, as compared to that of Y1-IO2F and Y1-IO2Cl devices, is also due to the more planar TPBT core structure, while the photostability of devices incorporating Y6-IO2Cl and Y1-IO2Cl is better than that of devices incorporating Y6-IO2F and Y1-IO2F, owing to more photostable chemical structures. These results present an outstanding performance for P3HT-based organic solar cells. Moreover, these small molecule blends are processed with an environmentally friendly solvent tetrahydrofuran, demonstrating both the sustainability and commercial viability of these types of organic photovoltaics.

Perylene Diimide-Fused Dithiophenepyrroles with Different End Groups as Acceptors for Organic Photovoltaics.

In this study, we synthesized four new A-DA'D-A acceptors (where A and D represent acceptor and donor chemical units) incorporating perylene diimide units (A') as their core structures and presenting various modes of halogenation and substitution of the functional groups at their end groups (A). In these acceptors, by fusing dithiophenepyrrole (DTP) moieties (D) to the helical perylene diimide dimer (hPDI) to form fused-hPDI (FhPDI) cores, we could increase the D/A' oscillator strength in the cores and, thus, the intensity of intramolecular charge transfer (ICT), thereby enhancing the intensity of the absorption bands. With four different end group units─IC2F, IC2Cl, IO2F, and IO2Cl─tested, each of these acceptor molecules exhibited different optical characteristics. Among all of these systems, the organic photovoltaic device incorporating the polymer PCE10 blended with the acceptor FhPDI-IC2F (1:1.1 wt %) had the highest power conversion efficiency (PCE) of 9.0%; the optimal PCEs of PCE10:FhPDI-IO2F, PCE10:FhPDI-IO2Cl, and PCE10:FhPDI-IC2Cl (1:1.1 wt %) devices were 5.2, 4.7, and 7.7%, respectively. The relatively high PCE of the PCE10:FhPDI-IC2F device resulted primarily from the higher absorption coefficients of the FhPDI-IC2F acceptor, lower energy loss, and more efficient charge transfer; the FhPDI-IC2F system experienced a lower degree of geminate recombination─as a result of improved delocalization of π-electrons along the acceptor unit─relative to that of the other three acceptors systems. Thus, altering the end groups of multichromophoric PDI units can increase the PCEs of devices incorporating PDI-derived materials and might also be a new pathway for the creation of other valuable fused-ring derivatives.

High-Performance Organic Solar Cells Featuring Double Bulk Heterojunction Structures with Vertical-Gradient Selenium Heterocyclic Nonfullerene Acceptor Concentrations.

In this study, we prepared organic photovoltaics (OPVs) featuring an active layer comprising double bulk heterojunction (BHJ) structures, featuring binary blends of a polymer donor and concentration gradients of two small-molecule acceptors. After forming the first BHJ structure by spin-coating, the second BHJ layer was transfer-printed onto the first using polydimethylsiloxane stamps. A specially designed selenium heterocyclic small-molecule acceptor (Y6-Se-4Cl) was employed as the second acceptor in the BHJ. X-ray photoelectron spectroscopy revealed that the two acceptors formed a gradient concentration profile across the active layer, thereby facilitating charge transportation. The best power conversion efficiencies (PCEs) for the double-BHJ-structured devices incorporating PM6:Y6-Se-4Cl/PM6:Y6 and PM6:Y6-Se-4Cl/PM6:IT-4Cl were 16.4 and 15.8%, respectively; these values were higher than those of devices having one-BHJ structures based on PM6:Y6-Se-4Cl (15.0%), PM6:Y6 (15.4%), and PM6:IT-4Cl (11.6%), presumably because of the favorable vertical concentration gradient of the selenium-containing small-molecule Y6-Se-4Cl in the active layer as well as some complementary light absorption. Thus, combining two BHJ structures with a concentration gradient of the two small-molecule acceptors can be an effective approach for enhancing the PCEs of OPVs.

Enabling High-Performance Tandem Organic Photovoltaic Cells by Balancing the Front and Rear Subcells.

In tandem organic photovoltaics, the front subcell is based on large-bandgap materials, whereas the case of the rear subcell is more complicated. The rear subcell is generally composed of a narrow-bandgap acceptor for infrared absorption but a large-bandgap donor to realize a high open-circuit voltage. Unfortunately, most of the ultraviolet-visible part of the photons are absorbed by the front subcell; as a result, in the rear subcell, the number of excitons generated on large-bandgap donors will be reduced significantly. This reduces the (photo) conductivity and finally limits the hole-transporting property of the rear subcell. In this work, a simple and effective way is proposed to resolve this critical issue. To ensure sufficient photogenerated holes in the rear subcell, a small amount of an infrared-absorbing polymer donor as a third component is introduced, which provides a second hole-generation and transporting mechanism to minimize the aforementioned detrimental effects. Finally, the short-circuit current density of the two-terminal tandem organic photovoltaic is significantly enhanced from 10.3 to 11.7 mA cm-2 (while retaining the open-circuit voltage and fill factor) to result in an enhanced power conversion efficiency of 15.1%.

Transparent Hole-Transporting Frameworks: A Unique Strategy to Design High-Performance Semitransparent Organic Photovoltaics.

Thanks to the nature of molecular orbitals, the absorption spectra of organic semiconductors are not continuous like those in traditional inorganic semiconductors, which offers a unique application of organic photovoltaics (OPVs): semitransparent OPVs. Recently, the exciting progress of materials design has promoted the development of semitransparent OPVs. However, in the perspective of device engineering, almost all reported works reduce the thickness of back/reflected electrode to obtain high average visible transmittance (AVT), which is a trade-off between power conversion efficiency (PCE) and the transmittance of the whole solar spectrum (visible and infrared), and therefore limit the further development. Herein, a unique strategy of "transparent hole-transporting frameworks" is proposed. A hole-transporting large-bandgap polymer (poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine (PTAA)) is employed to partially replace polymer donors in the active layer of PBDB-T/Y1. PTAA is a p-type polymer with a large bandgap of 2.9 eV; the partial substitution of PBDB-T by PTAA reduces the absorption of the active layer only in the visible region, keeping the hole-transporting pathways as well as the optimized film morphology. As a result, semitransparent OPVs with PCEs of 12% and AVTs of 20% are achieved, both on rigid and flexible substrates. To demonstrate the generality, this strategy is also used in three different active layers.

Incorporating Indium Selenide Nanosheets into a Polymer/Small Molecule Binary Blend Active Layer Enhances the Long-Term Stability and Performance of Its Organic Photovoltaics.

In this report, we demonstrated that the incorporation of 15 wt % two-dimensional transition-metal dichalcogenide materials indium selenide (In2Se3) nanosheets into a polymer (PM6)/small molecule (Y6) active layer not only increased its light absorption but also enhanced the long-term stability of the PM6/Y6/In2Se3 ternary blend organic photovoltaic (OPV) devices. The power conversion efficiency (PCE) of the device was improved from 15.7 to 16.5% for the corresponding PM6/Y6 binary blend device. Moreover, the PM6/Y6/In2Se3 device retained 80% of its initial PCE after thermal treatment at 100 °C for 600 h; in comparison, the binary blend device retained only 62% of its initial value. This relative enhancement of 29% resulted from the In2Se3 nanosheets retarding or facilitating molecule packing in different orientations that stabilizes the morphology of the active layer. We adopted a modified kinetics model to account for the intrinsic degradation of the OPV; the degradation-facilitated energy for the degradation kinetics of the PCE for the ternary blend device was 5.3 kJ/mol, half of that (11.3 kJ/mol) of the binary blend device, indicating a slower degradation rate occurring for the case of incorporating In2Se3 nanosheets. Therefore, the incorporation of transition metal dichalcogenide nanosheets having tunable band gaps and large asymmetric shape appears to be a new way to improve the long-term stability of devices and realize the practical use of OPVs.

Hydrogen plasma-treated MoSe2 nanosheets enhance the efficiency and stability of organic photovoltaics.

In this paper we report the effect on the power conversion efficiency (PCE) and stability of photovoltaic devices after incorporating hydrogenated two-dimensional (2D) MoSe2 nanosheets into the active layer of bulk heterojunction (BHJ) organic photovoltaics (OPV). The surface properties of 2D MoSe2 nanosheets largely affect their dispersion in the active layer blend and, thus, influence the carrier mobility, PCE, and stability of corresponding devices. We treated MoSe2 nanosheets with hydrogen plasma and investigated their influence on the polymer packing and fullerene domain size of the active layer. For the optimized devices incorporating 37.5 wt% of untreated MoSe2, we obtained a champion PCE of 9.82%, compared with the champion reference PCE of approximately 9%. After incorporating the hydrogen plasma-treated MoSe2 nanosheets, we achieved a champion PCE of 10.44%-a relative increase of 16% over that of the reference device prepared without MoSe2 nanosheets. This PCE is the one of the highest ever reported for OPVs incorporating 2D materials. We attribute this large enhancement to the enhanced exciton generation and dissociation at the MoSe2-fullerene interface and, consequently, the balanced charge carrier mobility. The device incorporating the MoSe2 nanosheets maintained 70% of its initial PCE after heat-treatment at 100 °C for 1 h; in contrast, the PCE of the reference device decreased to 60% of its initial value-a relative increase in stability of 17% after incorporating these nanosheets. We also incorporated MoSe2 nanosheets (both with and without treatment) into a polymer donor (PBDTTBO)/small molecule (IT-4F) acceptor system. The champion PCEs reached 7.85 and 8.13% for the devices incorporating the MoSe2 nanosheets with and without plasma treatment, respectively-relative increases of 8 and 12%, respectively, over that of the reference. These results should encourage a push toward the implementation of transition metal dichalcogenides to enhance the performances of BHJ OPVs.

Outdoor scene image segmentation based on background recognition and perceptual organization.

In this paper, we propose a novel outdoor scene image segmentation algorithm based on background recognition and perceptual organization. We recognize the background objects such as the sky, the ground, and vegetation based on the color and texture information. For the structurally challenging objects, which usually consist of multiple constituent parts, we developed a perceptual organization model that can capture the nonaccidental structural relationships among the constituent parts of the structured objects and, hence, group them together accordingly without depending on a priori knowledge of the specific objects. Our experimental results show that our proposed method outperformed two state-of-the-art image segmentation approaches on two challenging outdoor databases (Gould data set and Berkeley segmentation data set) and achieved accurate segmentation quality on various outdoor natural scene environments.

Can you see me now? Sensor positioning for automated and persistent surveillance.

Most existing camera placement algorithms focus on coverage and/or visibility analysis, which ensures that the object of interest is visible in the camera's field of view (FOV). However, visibility, which is a fundamental requirement of object tracking, is insufficient for automated persistent surveillance. In such applications, a continuous consistently labeled trajectory of the same object should be maintained across different camera views. Therefore, a sufficient uniform overlap between the cameras' FOVs should be secured so that camera handoff can successfully and automatically be executed before the object of interest becomes untraceable or unidentifiable. In this paper, we propose sensor-planning methods that improve existing algorithms by adding handoff rate analysis. Observation measures are designed for various types of cameras so that the proposed sensor-planning algorithm is general and applicable to scenarios with different types of cameras. The proposed sensor-planning algorithm preserves necessary uniform overlapped FOVs between adjacent cameras for an optimal balance between coverage and handoff success rate. In addition, special considerations such as resolution and frontal-view requirements are addressed using two approaches: 1) direct constraint and 2) adaptive weights. The resulting camera placement is compared with a reference algorithm published by Erdem and Sclaroff. Significantly improved handoff success rates and frontal-view percentages are illustrated via experiments using indoor and outdoor floor plans of various scales.