Ligand-channel-enabled ultrafast Li-ion conduction.

Li-ion batteries (LIBs) for electric vehicles and aviation demand high energy density, fast charging and a wide operating temperature range, which are virtually impossible because they require electrolytes to simultaneously have high ionic conductivity, low solvation energy and low melting point and form an anion-derived inorganic interphase1-5. Here we report guidelines for designing such electrolytes by using small-sized solvents with low solvation energy. The tiny solvent in the secondary solvation sheath pulls out the Li+ in the primary solvation sheath to form a fast ion-conduction ligand channel to enhance Li+ transport, while the small-sized solvent with low solvation energy also allows the anion to enter the first Li+ solvation shell to form an inorganic-rich interphase. The electrolyte-design concept is demonstrated by using fluoroacetonitrile (FAN) solvent. The electrolyte of 1.3 M lithium bis(fluorosulfonyl)imide (LiFSI) in FAN exhibits ultrahigh ionic conductivity of 40.3 mS cm-1 at 25 °C and 11.9 mS cm-1 even at -70 °C, thus enabling 4.5-V graphite||LiNi0.8Mn0.1Co0.1O2 pouch cells (1.2 Ah, 2.85 mAh cm-2) to achieve high reversibility (0.62 Ah) when the cells are charged and discharged even at -65 °C. The electrolyte with small-sized solvents enables LIBs to simultaneously achieve high energy density, fast charging and a wide operating temperature range, which is unattainable for the current electrolyte design but is highly desired for extreme LIBs. This mechanism is generalizable and can be expanded to other metal-ion battery electrolytes.

Tuning the Cathode-Electrolyte Interphase Chemistry with Multifunctional Additive for High-Voltage Li-Ion Batteries.

The utilization of layered oxides as cathode materials has significantly contributed to the advancement of the lithium-ion batteries (LIBs) with high energy density and reliability. However, the structural and interfacial instability triggered by side reactions when charged to high voltage has plagued their practical applications. Here, this work reports a novel multifunctional additive, id est, 7-Anilino-3-diethylamino-6-methyl fluoran (ADMF), which exhibits unique characteristics such as preferential adsorption, oxygen scavenging, and electropolymerization protection for high-voltage cathodes. The ADMF demonstrates the capability to ameliorate the growth of cathode-electrolyte interphase (CEI), effectively diminishing the dissolution of transition metal (TM) ions, reducing the interface impedance, and facilitating the Li+ transport. As a result, ADMF additive with side reaction-blocking ability significantly enhances the cycling stability of MCMB||NCM811 full-cells at 4.4 V and MCMB||LCO full-cells at 4.55 V, as evidenced by the 80% retention over 600 cycles and 87% retention after 750 cycles, respectively. These findings highlight the potential of the additive design strategy to modulate the CEI chemistry, representing a new paradigm with profound implications for the development of next-generation high-voltage LIBs.

Robotic Versus Laparoscopic Pancreaticoduodenectomy for Pancreatic Cancer: Evaluation and Analysis of Surgical Efficacy.

BACKGROUND: Evidence is limited for the treatment of pancreatic cancer among minimally invasive pancreatoduodenectomy. METHODS: This retrospective analysis evaluated patients who underwent robotic pancreaticoduodenectomy (RPD) or laparoscopic pancreaticoduodenectomy (LPD) from April 2016 to April 2023. Their baseline and perioperative data, including operative time, R0 resection rates, and severe complications rates, were analyzed, and the follow-up data, such as disease-free survival (DFS) and overall survival (OS), were collected. RESULTS: A total of 253 cases of LPD and RPD were performed, and 101 cases with pancreatic cancer were included, of which 54 were LPD and 47 were RPD. The conversion rate (4.3% vs. 29.6%, p = 0.001) and blood loss (400 vs. 575 mL, p < 0.05) were lower in the RPD group. No significant difference was observed between the two groups in terms of operative time, vessel resection rates, and TNM-stage diagnosis; however, R0 resection rates (80.9% vs. 70.4%) and lymph node harvest (24.2 vs. 21.9) had a higher tendency in the RPD group, and postoperative length of stay was shorter in the RPD cohort (11 vs. 13 days). Moreover, improved 1- to 3-years DFS (75.7%, 61.7%, and 36.0% vs. 59.0%, 35.6%, and 21.9%) and OS (94.7%, 84.7%, and 50.8% vs. 84.1%, 63.6%, and 45.5%) was found in the RPD group in comparison with the LPD group. CONCLUSIONS: RPD had advantages in surgical safety and oncological outcomes compared with LPD, but was similar to the latter in perioperative outcomes. Long-term outcomes require further study.

Left ventricular strain changes at high altitude in rats: a cardiac magnetic resonance tissue tracking imaging study.

BACKGROUND: Long-term exposure to a high altitude environment with low pressure and low oxygen could cause abnormalities in the structure and function of the heart. Myocardial strain is a sensitive indicator for assessing myocardial dysfunction, monitoring myocardial strain is of great significance for the early diagnosis and treatment of high altitude heart-related diseases. This study applies cardiac magnetic resonance tissue tracking technology (CMR-TT) to evaluate the changes in left ventricular myocardial function and structure in rats in high altitude environment. METHODS: 6-week-old male rats were randomized into plateau hypoxia rats (plateau group, n = 21) as the experimental group and plain rats (plain group, n = 10) as the control group. plateau group rats were transported from Chengdu (altitude: 360 m), a city in a plateau located in southwestern China, to the Qinghai-Tibet Plateau (altitude: 3850 m), Yushu, China, and then fed for 12 weeks there, while plain group rats were fed in Chengdu(altitude: 360 m), China. Using 7.0 T cardiac magnetic resonance (CMR) to evaluate the left ventricular ejection fraction (EF), end-diastolic volume (EDV), end-systolic volume (ESV) and stroke volume (SV), as well as myocardial strain parameters including the peak global longitudinal (GLS), radial (GRS), and circumferential strain (GCS). The rats were euthanized and a myocardial biopsy was obtained after the magnetic resonance imaging scan. RESULTS: The plateau rats showed more lower left ventricular GLS and GRS (P < 0.05) than the plain rats. However, there was no statistically significant difference in left ventricular EDV, ESV, SV, EF and GCS compared to the plain rats (P > 0.05). CONCLUSIONS: After 12 weeks of exposure to high altitude low-pressure hypoxia environment, the left ventricular global strain was partially decreased and myocardium is damaged, while the whole heart ejection fraction was still preserved, the myocardial strain was more sensitive than the ejection fraction in monitoring cardiac function.

Reliability and Validity of the Chinese Version of the Revised Sociosexual Orientation Inventory.

The Revised Sociosexual Orientation Inventory (SOI-R) is a measurement tool for assessing an individual's willingness to engage in uncommitted sexual relations. Despite its widespread use in various contexts, no studies have validated the use of this instrument in China. Therefore, the current study aimed to assess the reliability and validity of an existing Chinese translation of the SOI-R. A total of 2,209 participants were recruited and randomly divided into two groups: exploratory factor analysis was conducted on one group and confirmatory factor analysis on the other, with 161 participants from the total sample recruited to assess the test-retest reliability. Criterion validity was measured by testing the correlations between sociosexuality and sexual desire, mate value, sexual attitudes, and personality traits. The results confirmed a three-factor structure (sociosexual behaviors, attitudes, and desire) for the SOI-R. Furthermore, the findings demonstrated good reliability (internal consistency and test-retest stability) and validity (criterion validity, convergent validity, and discriminant validity) of the SOI-R, supporting its suitability as an assessment tool for sociosexual orientation in China.

Preliminary Evaluation of in vivo Reflectance Confocal Microscopy Features of Neonatal Lupus Erythematosus.

INTRODUCTION: Neonatal lupus erythematosus (NLE) is a rare autoimmune disease, which needs to be distinguished from eczema, congenital syphilis, and tinea corporis in newborns. Reflectance confocal microscopy (RCM) could be a helpful noninvasive diagnostic tool, which has been used to evaluate several inflammatory skin conditions. The aim of this study was to describe the RCM characteristics of NLE. METHODS: Eleven NLE patients were included in the study, and all patients were evaluated clinically with RCM. We also evaluated RCM images from 11 eczema patients as controls. RESULTS: Some major key diagnostic features of NLE can be observed by RCM: an enlarged honeycomb pattern (9/11, 81.8%), round-to-oval cyst-like structures were present (6/11, 54.5%), the normal ring-like structures were totally or partially obliterated (11/11, 100%) at the level of the dermo-epidermal junction, medium refractivity collagen fibers that were disorganized (10/11, 90.9%), numerous high refractivity round cells (11/11, 100%) in the dermis. CONCLUSION: RCM allows the visualization of major key diagnostic features of NLE and serves as a complementary diagnostic tool for NLE.

Reflectance confocal microscopy as a complementary diagnostic tool for greyish-brown dermatoses in children.

Mastocytosis, lichen planus pigmentosus (LPP), fixed drug eruption (FDE) and café-au-lait macules (CALM) have a similar appearance, often lead to misdiagnosis and missed diagnoses. At the outpatient clinic at Tianjin Children's Hospital in 21 patients with mastocytosis, 18 with LPP, 11 with FDE and 12 with CALM we evaluated the characteristics and distinguishing features of their dermatoses using reflectance confocal microscopy (RCM). In mastocytosis, the dermal papillary rings generally had a significantly increased bright refractive index and the superficial dermis was filled with moderate refractive flocculent material. In LPP, the dermal papillary rings were absent and numerous different-sized cellular structures were densely distributed in the superficial dermis. In FDE, the dermal papillary rings were intact with a significantly increased bright refractive index. In CALM, normal dermal papillary rings were detected with a uniformly slightly increased refractive index and no obvious abnormality in the superficial dermis. RCM allows for real-time visualization of the major key diagnostic and distinguishing features of four greyish-brown dermatoses in children.

Effects of water replenishment on lake water quality and trophic status: An 11-year study in cold and arid regions.

Water replenishment is an important measure for maintaining and improving the aquatic environmental quality of lakes. The problems of water quality deterioration and water shortage can be alleviated by introducing water of higher quality. However, the mechanism of water replenishment in the improvement of the water quality and trophic status of lakes remains unclear. This study investigated water replenishment in Wuliangsuhai Lake (WLSHL) from 2011 to 2021 by collecting seasonal water samples and conducting laboratory analyses. Water replenishment was found to be capable of significantly improving lake water quality and alleviating eutrophication. It is worth noting that single long-term water replenishment measures have limitations in improving the water quality and trophic status. The whole process was divided into three stages according to the water quality and trophic status, namely the buffer period, decline period, and stable period. During the buffer period, the water quality and trophic status showed only slight improvement because of the small amount of water replenishment and the low proportion of higher-quality water from the Yellow River. In the decline period, with increasing water replenishment, the proportion of higher-quality water from the Yellow River gradually increased, leading to the most significant and stable degree of improvement. In the stable period, increases in the amount of water replenishment had little effect on improving the water quality and trophic status, which is attributable to the balance between internal pollutants (lake water-sediment), and the balance between internal-external pollutants (lake water-irrigation return flow + Yellow River water). On the premise of stable water quality, with eutrophication control as the management goal, the optimal water replenishment would be approximately 10.58 ×108 m3. Further necessary measures for solving aquatic environmental problems include the combination of sediment dredging, optimization of the water replenishment route, and implementation of quality management in water replenishment.

Upgrading Electrolyte Antioxidant Chemistry by Constructing Potential Scaling Relationship.

Rational design of advanced electrolytes to improve the high-voltage capability has been attracting wide attention as one critical solution to enable next-generation high-energy-density batteries. However, the limited understanding of electrolyte antioxidant chemistry as well as the lack of valid quantization approaches have resulted in knowledge gap, which hinders the formulation of new electrolytes. Herein, we construct a standard curve based on representative solvation structures to quantify the oxidation stability of ether-based electrolytes, which reveals the linear correlation between the oxidation potential and the atomic charge of the least oxidation-resistant solvent. Dictated by the regularity between solvation composition and oxidation potential, a (Trifluoromethyl)cyclohexane-based localized high-concentration electrolyte dominated by anion-less solvation structures was designed to optimize the cycling performance of 4.5 V 30 µm-Li||3.8 mAh cm-2-LiCoO2 batteries, which maintained 80 % capacity retention even after 440 cycles. The consistency of experimental and computational results validates the proposed principles, offering a fundamental guideline to evaluate and design aggressive electrochemical systems.

Reduction-Tolerance Electrolyte Design for High-Energy Lithium Batteries.

Lithium batteries employing Li or silicon (Si) anodes hold promise for the next-generation energy storage systems. However, their cycling behavior encounters rapid capacity degradation due to the vulnerability of solid electrolyte interphases (SEIs). Though anion-derived SEIs mitigate this degradation, the unavoidable reduction of solvents introduces heterogeneity to SEIs, leading to fractures during cycling. Here, we elucidate how the reductive stability of solvents, dominated by the electrophilicity (EPT) and coordination ability (CDA), delineates the SEI formed on Li or Si anodes. Solvents exhibiting lower EPT and CDA demonstrate enhanced tolerance to reduction, resulting in inorganic-rich SEIs with homogeneity. Guided by these criteria, we synthesized three promising solvents tailored for Li or Si anodes. The decomposition of these solvents is dictated by their EPTs under similar solvation structures, imparting distinct characteristics to SEIs and impacting battery performance. The optimized electrolyte, 1 M lithium bis(fluorosulfonyl)imide (LiFSI) in N-Pyrrolidine-trifluoromethanesulfonamide (TFSPY), achieves 600 cycles of Si anodes with a capacity retention of 81 % (1910 mAh g-1). In anode-free Cu||LiNi0.5Co0.2Mn0.3O2 (NCM523) pouch cells, this electrolyte sustains over 100 cycles with an 82 % capacity retention. These findings illustrate that reducing solvent decomposition benefits SEI formation, offering valuable insights for the designing electrolytes in high-energy lithium batteries.

Structural Self-Regulation-Promoted NO Electroreduction on Single Atoms.

Simultaneously elevating loading and activity of single atoms (SAs) is desirable for SA-containing catalysts, including single-atom catalysts (SACs). However, the fast self-nucleation of SAs limits the loading, and the activity is confined by the adsorption-energy scaling relationships on monotonous SAs. Here, we theoretically design a novel type of SA-containing catalyst generated by two-step structural self-regulation. In the thermodynamic self-regulation step, divacancies in graphene spontaneously pull up SAs from transition metal supports (dv-g/TM; TM = fcc Co, hcp Co, Ni, Cu), leading to the expectably high loading of SAs. The subsequent kinetic self-regulation step involving an adsorbate-assisted and reversible vacancy migration dynamically alters coordination environments of SAs, helping circumvent the scaling relationships, and consequently, the as-designed dv-g/Ni can catalyze NO-to-NH3 conversion at a low limiting potential of -0.25 V vs RHE.

Zn Single Atoms/Clusters/Nanoparticles Embedded in the Hybrid Carbon Aerogels for High-Performance ORR Electrocatalysis.

Carbon-supported zinc single-atom catalysts have received considerable attention in the electrocatalytic oxygen reduction reaction (ORR) owing to the strong reduction capacity of zinc atoms and the abundant reserves of zinc elements. The common preparation method has been limited to the high-temperature pyrolysis of nitrogen-rich organic molecules and zinc ions, which makes it difficult to further improve the ORR performance. Herein, we first prepared ZnO/PNT/rGO aerogels as precursors via a simple hydrothermal method combined with freeze-drying, in which reduced graphene oxides (rGO) and polypyrrole nanotubes (PNT) together assembled into three-dimensional frames and numerous ZnO nanoparticles were anchored in the three-dimensional skeletons. Then, ZnO/PNT/rGO aerogels were calcined at 800 °C in the argon atmosphere, in which PNT/rGO were derived carbon aerogels, ZnO nanoparticles were reduced to Zn0 by carbon, and generating zinc single atoms were captured by the surrounding nitrogen atoms or aggregated into Zn clusters/nanoparticles in the carbon substrates. The obtained products were Zn single atoms/clusters/nanoparticles embedded into PNT/rGO-derived carbon aerogels, named Zn/NC catalysts. Zn/NC catalysts display a much higher half-wave potential and a larger limiting current density than pure rGO aerogels, NC, and Zn/C catalysts, indicating the synergy of excellent electronic transportation, high mass efficiency from outstanding porosity, and several active centers. Tailoring the quantity of zinc acetate can provide the optimal ORR performance with the Eonset of 0.96 V, the E1/2 of 0.845 V, and remarkable durability. This work exploits a novel strategy of carbon thermal reduction to construct high-performance Zn-based low-dimensional ORR catalysts.

Rutin hydrate relieves neuroinflammation in zebrafish models: Involvement of NF-κB pathway as a central network.

Neuroinflammation is prevalent in multiple brain diseases and may also lead to dementia, cognitive impairment, and impaired spatial memory function associated with neurodegenerative diseases. A neuroprotective and antioxidant flavonoid, rutin hydrate (RH), was evaluated for the anti-neuroinflammatory activity mediated by copper sulfate (CuSO4) solution and lipopolysaccharide (LPS) in zebrafish. The results showed that 100 mg/L RH significantly reduced the ratio of neutrophil mobility in caudal hematopoietic tissue (CHT) region caused by CuSO4 and the number of neutrophils co-localized with facial peripheral nerves. In the LPS model, RH co-injection significantly diminished neutrophil and macrophage migration. Therefore, RH exhibited a significant rescue effect on both models. In addition, RH treatment remarkably reduced the effects of neuroinflammation on the locomotor ability, expression levels of genes associated with behavioral disorders, and acetylcholinesterase (AChE) activity. Furthermore, network pharmacology techniques were employed to investigate the potential mechanisms, and the associated genes and enzyme activities were validated in order to elucidate the underlying mechanisms. Network pharmacological analysis and zebrafish model indicated that RH regulated the expressions of NF-κB pathway-related targets (Toll-like receptor 9 (tlr9), nuclear factor kappa B subunit 1 (nfkb1), RELA proto-oncogene (RelA), nitric oxide synthase 2a, inducible (nos2a), tumour necrosis factor alpha-like (tnfα), interleukin 6 (il6), interleukin 1ß (il1ß), chemokine 8 (cxcl8), and macrophage migration inhibitory factor (mif)) as well as six key factors (arachidonic acid 4 alpha-lipoxygenase (alox4a), arachidonate 5-lipoxygenase a (alox5), prion protein a (prnpa), integrin, beta 2 (itgb2), catalase (CAT), and alkaline phosphatase (ALP) enzymes). Through this study, a thorough understanding of the mechanism underlying the therapeutic effects of RH in neuroinflammation has been achieved, thereby establishing a solid foundation for further research on the potential therapeutic applications of RH in neuroinflammatory disorders.

Feasibility and reproducibility of semi-automated longitudinal strain analysis: a comparative study with conventional manual strain analysis.

BACKGROUND: Conventional approach to myocardial strain analysis relies on a software designed for the left ventricle (LV) which is complex and time-consuming and is not specific for right ventricular (RV) and left atrial (LA) assessment. This study compared this conventional manual approach to strain evaluation with a novel semi-automatic analysis of myocardial strain, which is also chamber-specific. METHODS: Two experienced observers used the AutoStrain software and manual QLab analysis to measure the LV, RV and LA strains in 152 healthy volunteers. Fifty cases were randomly selected for timing evaluation. RESULTS: No significant differences in LV global longitudinal strain (LVGLS) were observed between the two methods (-21.0% ± 2.5% vs. -20.8% ± 2.4%, p = 0.230). Conversely, RV longitudinal free wall strain (RVFWS) and LA longitudinal strain during the reservoir phase (LASr) measured by the semi-automatic software differed from the manual analysis (RVFWS: -26.4% ± 4.8% vs. -31.3% ± 5.8%, p < 0.001; LAS: 48.0% ± 10.0% vs. 37.6% ± 9.9%, p < 0.001). Bland-Altman analysis showed a mean error of 0.1%, 4.9%, and 10.5% for LVGLS, RVFWS, and LASr, respectively, with limits of agreement of -2.9,2.6%, -8.1,17.9%, and -12.3,33.3%, respectively. The semi-automatic method had a significantly shorter strain analysis time compared with the manual method. CONCLUSIONS: The novel semi-automatic strain analysis has the potential to improve efficiency in measurement of longitudinal myocardial strain. It shows good agreement with manual analysis for LV strain measurement.

Linear alopecia in pediatrics: RCM and dermoscopy reveal diagnostic cues.

BACKGROUND: Alopecia areata (AA), trichotillomania (TM), nevus sebaceous (NS), and linear scleroderma en coup de sabre (LSCS) can all present with a patch of linear alopecia, making diagnosis challenging. The purpose of this study was to combine reflectance confocal microscopy (RCM) and dermoscopy in the diagnosis of these lesions in children. METHODS: A total of 36 patients with linear alopecia were enrolled, of whom 14 had AA, seven had TM, nine had NS, and six had LSCS. We evaluated the characteristics and distinguishing features of the four conditions using RCM and dermoscopy. RESULTS: The key to differential diagnosis was the dermal Hair follicle density in the dermis was decreased in AA, and the size and density of the follicular openings were normal in TM. In NS, the major features were petal-like and frogspawn-like structures. In LSCS, dermal papillary rings, sebaceous glands, and follicles were partially or completely missing, and abundant fibrous material was distributed in the dermis. Dermoscopy revealed alopecia, and all four conditions resulted in decreased hair density. AA patients exhibited yellow dots, black dots, and exclamation mark hairs. TM patients presented with irregularly broken hairs and blood spots. Both NS and LSCS patients exhibited an absence of follicular openings; NS patients demonstrated whitish and yellowish round structures, while an atrophic area with white patches, linear vessels, and no yellow or black dots was observed in LSCS patients CONCLUSION: RCM combined with dermoscopy can provide additional information on disease states and differentiate between AA, TM, NS, and LSCS.

Preliminary evaluation of penile papule dermatoses with reflectance confocal microscopy in children.

BACKGROUND: Owing to their similar appearance, lichen striatus (LS), lichen nitidus (LN), juvenile xanthogranuloma (JXG), and molluscum contagiosum (MC) on the penis often lead to misdiagnosis and missed diagnosis, especially in children. In vivo evaluation of penile dermatoses with reflectance confocal microscopy (RCM) is helpful in the diagnosis of these ambiguous lesions in children. METHODS: We recruited 12 patients with LS, nine with LN, seven with JXG, and nine with MC and evaluated the characteristics and distinguishing features of the four kinds of papule dermatoses on the penis using RCM. RESULTS: The four dermatoses all had unique RCM features. LS generally showed focally destroyed dermal papillary rings, with numerous mononuclear cell clusters aggregated inside the papillary rings, and highly refractive clumps were observed. For LN, the dermal papillary rings were completely destroyed and arranged in a solitary, enlarged, cavity-like structure, in which round cells, particulate matter structures, and plump cellular structures were aggregated; the adjacent skin was completely normal. In JXG, the dermal papillary rings were significantly dilated, and the superficial dermis was filled with different-sized large bright ring cells; smaller, refractive, roundish structures; and particulate matter. For MC, the normal structures completely disappeared; the lesions were arranged in a crater-shaped structure; and a mass-like substance formed by the aggregation of multiple, uniform, roundish structures was observed within the crater. CONCLUSION: RCM allows for real-time visualization of major key diagnostic and distinguishing features of four papule dermatoses, LS, LN, JXG, and MC, on the penis in children.

In vivo evaluation of vulvar lichen sclerosus with reflectance confocal microscopy and therapeutic monitoring in children.

BACKGROUND: Vulvar lichen sclerosus (VLS) in girls presents with itching, dysuria, and constipation and may result in the loss of vulvar architecture. In patients with an ambiguous clinical presentation, reflectance confocal microscopy (RCM) could be a helpful noninvasive diagnostic tool. The aim of this study was to describe the RCM characteristics of VLS and explore the clinical application value of RCM in therapeutic monitoring. METHODS: Sixteen patients with VLS were included in the study. All patients were periodically evaluated clinically with RCM, and different treatment regimens were given based on the patient's clinical appearances and RCM features. RESULTS: Some major key diagnostic features of VLS can be observed by RCM, including round to oval cyst-like structures with medium-to-low-refractive keratinoid substances (75%), thinning of the epidermal thickness (100%), destruction of the ring-like structures around dermal papillae (100%), disorderly distributed coarse medium-refractive fibrous material (100%),polygonal, plump, high-refractive cellular structures and linear low-refractive canalicular structures (100%). All of these characteristics had a high correspondence with histopathological features. The clinical manifestations improved after individualized treatment regimens based on the clinical appearances and RCM features. CONCLUSION: RCM allows the visualization of major key diagnostic features of VLS and represents a valid option for objective therapeutic monitoring.

Excess iodide-induced reactive oxygen species elicit iodide efflux via ß-tubulin-associated ClC-3 in thyrocytes.

Iodide (I-) is crucial to thyroid function, and its regulation in thyrocytes involves ion transporters and reactive oxygen species (ROS). However, the extent of 2Cl-/H+ exchanger (ClC-3) involvement in the iodide (I-) efflux from thyrocytes remains unclear. Therefore, we examined the effects of ClC-3 on I- efflux. ClC-3 expression was found to significantly alter the serum TT3 and TT4 concentrations in mice. We further found that excess I- stimulation affected ClC-3 expression, distribution, and I- efflux in FRTL-5 cells. Immunofluorescence analyses indicated that ClC-3 mainly accumulated in the cell membrane and co-localized with ß-tubulins after 24 h of excess I- treatment, and that this process depended on ROS production. Thus, ClC-3 may be involved in I- efflux at the apical pole of thyrocytes via excess I--induced ROS production and ß-tubulin polymerization. Our results reveal novel insights into the role of ClC-3 in I- transport and thyroid function.

Rapid identification of methylase specificity (RIMS-seq) jointly identifies methylated motifs and generates shotgun sequencing of bacterial genomes.

DNA methylation is widespread amongst eukaryotes and prokaryotes to modulate gene expression and confer viral resistance. 5-Methylcytosine (m5C) methylation has been described in genomes of a large fraction of bacterial species as part of restriction-modification systems, each composed of a methyltransferase and cognate restriction enzyme. Methylases are site-specific and target sequences vary across organisms. High-throughput methods, such as bisulfite-sequencing can identify m5C at base resolution but require specialized library preparations and single molecule, real-time (SMRT) sequencing usually misses m5C. Here, we present a new method called RIMS-seq (rapid identification of methylase specificity) to simultaneously sequence bacterial genomes and determine m5C methylase specificities using a simple experimental protocol that closely resembles the DNA-seq protocol for Illumina. Importantly, the resulting sequencing quality is identical to DNA-seq, enabling RIMS-seq to substitute standard sequencing of bacterial genomes. Applied to bacteria and synthetic mixed communities, RIMS-seq reveals new methylase specificities, supporting routine study of m5C methylation while sequencing new genomes.

A novel antibacterial and fluorescent coating composed of polydopamine and carbon dots on the surface of orthodontic brackets.

Many kinds of antibacterial coatings have been designed to prevent the adherence of bacteria onto the surface of a fixed orthodontic device of brackets. However, the problems such as weak binding force, undetectable, drug resistance, cytotoxicity and short duration needed to be solved. Thus, it has great value in developing novel coating methods with long-term antibacterial and fluorescence properties according to the clinical application of brackets. In this study, we synthesized blue fluorescent carbon dots (HCDs) using the traditional Chinese medicinal honokiol, which could cause irreversible killing effects on both gram-positive and gram-negative bacteria through positive charges on the surface and inducing reactive oxygen species (ROS) production. Based on this, the surface of brackets was serially modified with polydopamine and HCDs, taking advantage of the strong adhesive properties as well as the negative surface charge of polydopamine particles. It is found that this coating exhibits stable antibacterial properties in 14 days with good biocompatibility, which can provide a new solution and strategy to solve the series of hazards caused by bacterial adhesion on the surface of orthodontic brackets.