The lipid droplet assembly complex consists of seipin and four accessory factors in budding yeast.

Seipin, a crucial protein for cellular lipid droplet (LD) assembly, oligomerizes at the interface between the endoplasmic reticulum and LDs to facilitate neutral lipid packaging. Using proximity labeling, we identified four proteins-Ldo45, Ldo16, Tgl4, and Pln1-that are recruited to the vicinity of yeast seipin, the Sei1-Ldb16 complex, exclusively when seipin function is intact, hence termed seipin accessory factors. Localization studies identified Tgl4 at the endoplasmic reticulum-LD contact site, in contrast to Ldo45, Ldo16, and Pln1 at the LD surface. Cells with compromised seipin function resulted in uneven distribution of these proteins with aberrant LDs, supporting a central role of seipin in orchestrating their association with the LD. Overexpression of any seipin accessory factor causes LD aggregation and affects a subset of LD protein distribution, highlighting the importance of their stoichiometry. Although single factor mutations show minor LD morphology changes, the combined mutations have additive effects. Lastly, we present evidence that seipin accessory factors assemble and interact with seipin in the absence of neutral lipids and undergo dynamical rearrangements during LD formation induction, with Ldo45 acting as a central hub recruiting other factors to interact with the seipin complex.

Optimization and Parameter Investigation of the Planar Photocatalytic Microreactor.

The microreactor could break the limitation of mass transfer and photon transmission in photocatalysis. Through a facile assembly method, a planar photocatalytic microreactor was constructed to fit most of the photocatalysts regardless of their strict preparation method. This microreactor exhibits a 2.41-fold efficiency compared to a bulk reactor. Parameters that affect the photocatalytic performance were discussed in detail by experiment and calculation. The diffusion rate is the main bottleneck in a planar microreactor under a laminar flow. The microreactor with lower height shows higher efficiency owing to faster mass transfer, while the length and width affect slightly. Elevating the light power density provides a diminishing benefit. Faster flow speed reduces the apparent degradation percent but increases the chemical reaction rate, in fact. The reaction rate increases to 9.31 times by reducing the height from 500 to 100 µm and grows another 1.76 times by adding the flow speed from 10 to 40 mL/h. This work illustrates the influence of parameters on planar photocatalytic microreactors and offers a promising prospect for large-volume photocatalytic water treatment.

Low-Energy Photons Dual Harvest for Photocatalytic Hydrogen Evolution: Bimodal Surface Plasma Resonance Related Synergism of Upconversion and Pyroelectricity.

Utilization of low-energy photons for efficient photocatalysis remains a challenging pursuit. Herein, a strategy is reported to boost the photocatalytic performance, by promoting low-energy photons dual harvest through bimodal surface plasmon resonance (SPR)-enhanced synergistically upconversion and pyroelectricity. It is achieved by introducing triplet-triplet annihilation upconversion (TTA-UC) materials and plasmonic material (Au nanorods, AuNRs) into composite fibers composed of pyroelectric substrate (poly(vinylidene fluoride)) and photocatalyst Cd0.5 Zn0.5 S. Interestingly, the dual combination of TTA-UC and AuNRs SPR in the presence of polyvinylidene fluoride substrate with pyroelectric property promotes the photocatalytic hydrogen evolution performance by 2.88 folds with the highest average apparent quantum yield of 7.0% under the low-energy light (λ > 475 nm), which far outweighs the role of separate application of TTA-UC (34%) and AuNRs SPR (76%). The presence of pyroelectricity plays an important role in the built-in electric field as well as the accordingly photogenerated carrier behavior in the composite photocatalytic materials, and the pyroelectricity can be affected by AuNRs with different morphologies, which is proved by the Kelvin probe force microscopy and photocurrent data. This work provides a new avenue for fully utilizing low-energy photons in the solar spectrum for improving photocatalytic performance.

Modeling of High-Power Tonpilz Terfenol-D Transducer Using Complex Material Parameters.

The loss effect in smart materials, the active part of a transducer, is of significant importance to acoustic transducer designers, as it directly affects the important characteristics of the transducer, such as the impedance spectra, frequency response, and the amount of heat generated. It is therefore beneficial to be able to incorporate energy losses in the design phase. For high-power low-frequency transducers requiring more smart materials, losses become even more appreciable. In this paper, similar to piezoelectric materials, three losses in Terfenol-D are considered by introducing complex quantities, representing the elastic loss, piezomagnetic loss, and magnetic loss. The frequency-dependent eddy current loss is also considered and incorporated into the complex permeability of giant magnetostrictive materials. These complex material parameters are then successfully applied to improve the popular plane-wave method (PWM) circuit model and finite element method (FEM) model. To verify the accuracy and effectiveness of the proposed methods, a high-power Tonpilz Terfenol-D transducer with a resonance frequency of around 1 kHz and a maximum transmitting current response (TCR) of 187 dB/1A/µPa is manufactured and tested. The good agreement between the simulation and experimental results validates the improved PWM circuit model and FEA model, which may shed light on the more predictable design of high-power giant magnetostrictive transducers in the future.

CIM-Based Smart Pose Detection Sensors.

The majority of digital sensors rely on von Neumann architecture microprocessors to process sampled data. When the sampled data require complex computation for 24×7, the processing element will a consume significant amount of energy and computation resources. Several new sensing algorithms use deep neural network algorithms and consume even more computation resources. High resource consumption prevents such systems for 24×7 deployment although they can deliver impressive results. This work adopts a Computing-In-Memory (CIM) device, which integrates a storage and analog processing unit to eliminate data movement, to process sampled data. This work designs and evaluates the CIM-based sensing framework for human pose recognition. The framework consists of uncertainty-aware training, activation function design, and CIM error model collection. The evaluation results show that the framework can improve the detection accuracy of three poses classification on CIM devices using binary weights from 33.3% to 91.5% while that on ideal CIM is 92.1%. Although on digital systems the accuracy is 98.7% with binary weight and 99.5% with floating weight, the energy consumption of executing 1 convolution layer on a CIM device is only 30,000 to 50,000 times less than the digital sensing system. Such a design can significantly reduce power consumption and enables battery-powered always-on sensors.

Efficient photocatalytic H2production realized by MnxCd1-xSeIn situheterojunction.

Fast recombination of photoinduced carriers inhibits the performance of photocatalysts. By constructing heterojunctions, built-in electric fields can be formed to separate electrons and holes and finally enhance the photocatalytic efficiency. Herein, a MnxCd1-xSein situheterojunction was fabricated by a facile solvothermal method to draw upon this advantage. Absorption spectra show that the light absorption of CdSe raises up obviously after the doping of Mn2+. Best performance was achieved when the doping percent of Mn2+was 50%. This Mn0.5Cd0.5Se sample exhibits a 7.2 folds increase in hydrogen evolution against pure CdSe owing to the fast electron transportation. Moreover, it proves well stability in an 18 h cycling test and gains a 6.7% apparent quantum yield under 420 nm light. In summary, this work constructs anin situheterojunction to enhance the photocatalytic hydrogen evolution efficiency and sheds light on a feasible way for the application of photocatalysis.

Selectivity Enhancement in Heterogeneous Photocatalytic Transformations.

Photocatalysis has been invariably considered as an unselective process (especially in water) for a fairly long period of time, and the investigation on selective photocatalysis has been largely neglected. In recent years, the field of selective photocatalysis is developing rapidly and now extended to several newer applications. This review focuses on the overall strategies which can improve the selectivity of photocatalysis encompassing a wide variety of photocatalysts, and modifications thereof, as well as the related vital processes of industrial significance such as reduction and oxidation of organics, inorganics, and CO2 transformation. Comprehensive and successful strategies for enhancing the selectivity in photocatalysis are abridged to reinvigorate and stimulate future investigations. In addition, nonsemiconductor type photocatalysts, such as Ti-Si molecular sieves and carbon quantum dots (CQDs), are also briefly appraised in view of their special role in special selective photocatalysis, namely epoxidation reactions, among others. In the end, a summary and outlook on the challenges and future directions in the research field are included in the comprehensive review.

Interleukin 10 Gene-Modified Bone Marrow-Derived Dendritic Cells Attenuate Liver Fibrosis in Mice by Inducing Regulatory T Cells and Inhibiting the TGF-ß/Smad Signaling Pathway.

AIM: To explore the therapeutic effects and mechanisms of interleukin 10 gene-modified bone marrow-derived dendritic cells (DC-IL10) on liver fibrosis. METHODS: In vitro, BMDCs were transfected with lentiviral-interleukin 10-GFP (LV-IL10-GFP) at the MOI of 1 : 40. Then, the phenotype (MHCII, CD80, and CD86) and allo-stimulatory ability of DC-IL10 were identified by flow cytometry, and the levels of IL-10 and IL-12 (p70) secreted into the culture supernatants were quantified by ELISA. In vivo, DC-IL10 was injected into mice with CCl4-induced liver fibrosis through the tail vein. Lymphocytes were isolated to investigate the differentiation of T cells, and serum and liver tissue were collected for biochemical, cytokine, histopathologic, immune-histochemical, and Western blot analyzes. RESULTS: In vitro, the expressions of MHCII, CD80, and CD86 in DC-IL10 were significantly suppressed, allogeneic CD4+T cells incubated with DC-IL10 showed a lower proliferative response, and the levels of IL-10 and IL-12 (p70) secreted into the DC-IL10 culture supernatants were significantly increased and decreased, respectively. In vivo, regulatory T cells (Tregs) were significantly increased, while ALT, AST, and inflammatory cytokines were significantly reduced in the DC-IL10 treatment group, and the degree of hepatic fibrosis was obviously reversed. The TGF-ß/smad pathway was inhibited following DC-IL10 treatment compared to the liver fibrosis group. CONCLUSION: IL-10 genetic modification of BMDCs may maintain DC in the state of tolerance and allow DC to induce T cell hyporesponsiveness or tolerance. DC-IL10 suppressed liver fibrosis by inducing Treg production and inhibiting the TGF-ß/smad signaling pathway.

An estimate of the number of tropical tree species.

The high species richness of tropical forests has long been recognized, yet there remains substantial uncertainty regarding the actual number of tropical tree species. Using a pantropical tree inventory database from closed canopy forests, consisting of 657,630 trees belonging to 11,371 species, we use a fitted value of Fisher's alpha and an approximate pantropical stem total to estimate the minimum number of tropical forest tree species to fall between ∼ 40,000 and ∼ 53,000, i.e., at the high end of previous estimates. Contrary to common assumption, the Indo-Pacific region was found to be as species-rich as the Neotropics, with both regions having a minimum of ∼ 19,000-25,000 tree species. Continental Africa is relatively depauperate with a minimum of ∼ 4,500-6,000 tree species. Very few species are shared among the African, American, and the Indo-Pacific regions. We provide a methodological framework for estimating species richness in trees that may help refine species richness estimates of tree-dependent taxa.

Origin and manipulation of band gaps in three-dimensional dielectric helix structures.

In this study, we present a comprehensive analysis to examine the origin of circular polarization stop bands in a dielectric helix structure. We show that band gaps in a helix structure may result from Bragg resonance or non-Bragg mechanism. The two types of gaps exhibit distinct optical properties and display an opposite dependence with respect to structural periodicity. The interplay of gaps not only gives rise to various operation scenarios, but results in pronounced modifications to dispersion characteristics that lead to abnormal propagation properties of circularly polarized waves. Our findings reveal versatile behaviors of circularly polarized light interacted with a three-dimensional helix medium, which can be of great importance for the design and implementation of circular polarization-dependent devices and applications.

Efficient liquid phase photothermal catalysis realized by Ag2O/Bi4O5I2via heat-localization in a microreactor.

By constructing a Ag2O/Bi4O5I2 p-n heterojunction and applying a heat-localization microreactor, efficient photocatalysis enhanced by both photoinduced carrier separation and the photothermal effect was realized. This work focuses on the utilization of near-infrared light to broaden the absorption spectrum and accelerate the transportation of carriers. Through the production and localization of heat, it provides a novel thought for full-spectrum photocatalysis.

Mephedrone concentrations in clinical intoxications and fatal cases: a systematic review.

BACKGROUND/PURPOSE: Mephedrone, a ring-substituted synthetic cathinone derivative, gained popularity as a recreational drug in the late 2000s. Reports of fatalities related to mephedrone use have emerged with varying concentrations of blood mephedrone upon forensic investigations. This study aims to evaluate the existing literature on mephedrone concentrations in instances of clinical intoxication and fatal cases. METHODS: We comprehensively searched electronic databases, including Web of Science, PubMed, Embase, and the Cochrane Library, from inception to July 26, 2023. We selected case reports or case series of mephedrone intoxication presented with individual blood mephedrone concentration. Patient demographics, clinical characteristics, blood mephedrone concentrations, and outcomes were extracted for analysis. RESULTS: 77 cases from 14 case reports and 6 case series were identified for review. There were 34 deaths and 43 non-fatal intoxication cases. The median patient's age was 24 years (IQR: 10), and 91.4% were male. Forty-five of the 63 cases (71.4%) were reported with alcohol or other illicit drugs detected. The median blood mephedrone concentration was 0.37 mg/L (IQR: 1.09 mg/L). Death cases were older than non-fatal cases (median = 30 vs. 22 years, p = 0.029). The median blood mephedrone concentration was higher in death cases (1.30 mg/L vs. 0.12 mg/L, p < 0.0001). CONCLUSIONS: Blood mephedrone concentration in dead patients is approximately 11 times higher than in non-fatal cases. This finding could serve as a stepping stone to the diagnosis of concentrations in clinical poisoning cases and deaths, especially in the treatment of poisoning patients. In more extensive prospective studies, further research is necessary to establish a standardized, real-time available methodology and validate the predictive value of mephedrone concentrations in the prognostic value of mephedrone concentrations.

The critical roles of STING in mitochondrial homeostasis.

The stimulator of interferon genes (STING) is a crucial signaling hub in the immune system's antiviral and antimicrobial defense by detecting exogenous and endogenous DNA. The multifaceted functions of STING have been uncovered gradually during past decades, including homeostasis maintenance and overfull immunity or inflammation induction. However, the subcellular regulation of STING and mitochondria is poorly understood. The main functions of STING are outlined in this review. Moreover, we discuss how mitochondria and STING interact through multiple mechanisms, including the release of mitochondrial DNA (mtDNA), modulation of mitochondria-associated membrane (MAM) and mitochondrial dynamics, alterations in mitochondrial metabolism, regulation of reactive oxygen species (ROS) production, and mitochondria-related cell death. Finally, we discuss how STING is crucial to disease development, providing a novel perspective on its role in cellular physiology and pathology.

Elevating the Photocatalytic Performance of BiOCl by Promoting Light Utilization: From Co doping to the Microreactor.

Owing to its unique layered structure, BiOCl demonstrates high photocatalytic activity. However, its wide bandgap hinders the absorption of visible light. Doping modification is an effective method to expand the light absorption edge of photocatalysts by creating a doping energy level within the bandgap. Herein, Co as a variable valence element was used to dope the BiOCl nanosheets through a simple hydrothermal approach. As a result, the absorption edge of Co-BiOCl extends to the visible light region, and the photocatalytic performance was enhanced by 3.02 times. To overcome the shortcoming of photons being consumed easily in the bulk reactor, a planar microreactor was introduced to reduce the attenuation of light and accelerate the mass transfer. By comparison to the bulk reactor, a maximum of 15.3-fold additional activity promotion emerged. This work combines doping modification and reactor improvement to realize highly efficient photocatalysis in practical application.

Assessing genetic diversity in critically endangered Chieniodendron hainanense populations within fragmented habitats in Hainan.

Habitat fragmentation has led to a reduction in the geographic distribution of species, making small populations vulnerable to extinction due to environmental, demographic, and genetic factors. The wild plant Chieniodendron hainanense, a species with extremely small populations, is currently facing endangerment and thus requires urgent conservation efforts. Understanding its genetic diversity is essential for uncovering the underlying mechanisms of its vulnerability and for developing effective conservation strategies. In our study, we analyzed 35 specimens from six different populations of C. hainanense using genotyping-by-sequencing (GBS) and single nucleotide polymorphism (SNP) methodologies. Our findings indicate that C. hainanense has limited genetic diversity. The observed heterozygosity across the populations ranged from 10.79 to 14.55%, with an average of 13.15%. We categorized the six populations of C. hainanense into two distinct groups: (1) Diaoluoshan and Baishaling, and (2) Wuzhishan, Huishan, Bawangling, and Jianfengling. The genetic differentiation among these populations was found to be relatively weak. The observed loss of diversity is likely a result of the effects of natural selection.

Comparative study of contents of several bioactive components in fruiting bodies and mycelia of culinary-medicinal mushrooms.

Mushrooms (including fruiting bodies and mycelia) contain several bioactive components such as lovastatin, γ-aminobutyric acid (GABA), and ergothioneine. This article reports the results of 49 samples, including 9 fruiting bodies, 39 mycelia, and 1 vegetative cell, of 35 species of culinary-medicinal mushrooms from 18 genera: Agaricus, Agrocybe, Coprinus, Cordyceps, Cyathus, Daedalia, Flammulina, Fomes, Ganoderma, Grifola, Laetiporus, Lentinus, Morchella, Ophiocordyceps, Pleurotus, Trametes, Tremella, and Verpa. The results show that Cyathus striatus strain 978 contained the highest amount of lovastatin (995.66 mg/kg) in mycelia. Among fruiting bodies, 6 samples contained a high amount of GABA (274.86-822.45 mg/kg), whereas among mycelia, contents of GABA in 27 samples ranged from 215.36 to 2811.85 mg/kg. Among mycelia, Pleurotus cornucopiae strain 1101 contained the highest amount of ergothioneine (3482.09 mg/kg). Overall, these 3 bioactive components were commonly found in most mushrooms, and the results obtained might be related to their beneficial effects.

Trends in Palliative Care Research During the COVID-19 Pandemic.

To demonstrate the trends and variety of research on palliative care during the COVID-19 pandemic. A systematic search of the Web of Science database. Since the outbroke of the COVID-19 pandemic, the adjustment of palliative care systems is warranted to maintain a high quality of care. The COVID-19 -related palliative care studies account for approximately 4% of all publications on palliative care. However, there is a dearth of research investigating the nature of these studies. A total of 293 studies were included. Of the included studies, those related to system improvement were the most common (181/293, 61.8%), followed by those related to patient care (79/293, 27.0%), bereavement support for patients or family members (19/293, 6.5%), and the mental health of frontline practitioners (14/293, 4.8%). From these studies, 82, 137, and 74 studies were published in 2020, 2021, and 2022 (until August 1), respectively. The research trends of palliative care demonstrate the flexibility and rapid response of the global palliative care system to the COVID-19 pandemic and show how the palliative care system is evolving. While most studies are interested in system improvement, patient care, and bereavement support, the mental health of frontline practitioners has received less attention. Our findings provide palliative care practitioners with current valuable information and highlight possible future trends.

Ensemble modeling of black pomfret (Parastromateus niger) habitat in the Taiwan Strait based on oceanographic variables.

The location, effort, number of captures, and time of fishing were all used in this study to assess the geographic distribution of Parastromateus niger in the Taiwan Strait. Other species distribution models performed worse than generalized linear models (GLMs) based on six oceanographic parameters. The sea surface temperature (SST) was between 26.5 °C and 29.5 °C, the sea surface chlorophyll (SSC) level was between 0.3-0.44 mg/m3, the sea surface salinity (SSS) was between 33.4 °C and 34.4 °C, the mixed layer depth was between 10 °C and 14 °C, the sea surface height was between 0.57 °C and 0.77 °C, and the eddy kinetic energy (EKE) was between 0.603 °C. According to the statistical findings, SST is merely a small effect compared to SSS, SSC level, and EKE in terms of impacting species distribution. By combining four effective single-algorithm models with no obvious bias, an ensemble habitat model was created. The ranges of 117°E-119°E and 22°N-24°N have the highest annual distributions of S.CPUE and nominal CPUE.

Infrared light induced sustainable enhancement of photocatalytic efficiency by thermoelectric effect.

Hindering the recombination of photoinduced electron-hole pairs is of significance for enhancing photocatalytic performance. Applying a voltage to separate carriers offers an option to realize it. Thermoelectric materials own the ability to continuously sustain a voltage when a temperature difference exists between its two sides. However, maintaining the thermoelectric effect without wasting additional energy remains a challenge. Herein, a C3N4/Polyaniline/Poly(vinylidene fluoride) cilia array was fabricated to reach efficient photocatalysis through thermoelectric effect and photothermal effect. The cilia array structure offers more than 40% of light absorbance compared to the film. Hence, the infrared light in sunlight, which was usually omitted in photocatalysis, was transformed into heat. Through the unique design which draws upon the huge difference in thermal conductivity of air and water, a temperature gap was formed between the top and bottom sides of the cilia array by half-submerging it in water. Therefore, the photocatalytic efficiency was improved by 84.4%. This work achieves an energy-saving method to enhance photocatalytic performance by activating thermoelectric effect through infrared light, shedding light on the application of multi-modes enhanced photocatalysis.

Clinical implementation of three-dimensional standardized template-guided brachytherapy for patients with locally advanced cervical cancer.

Purpose: Although customized three-dimensional (3D) templates have shown advantages in brachytherapy, widespread application is still full of challenges. The present work proposed the use of a commercial 3D standardized template-guided intracavitary/interstitial brachytherapy (IC/ISBT) that could provide simple and reproducible needles' insertion. Material and methods: 43 patients received external beam radiotherapy (EBRT) with 45-50.4 Gy and subsequent IC/ISBT with 28 Gy in 4 fractions. In terms of IC/ISBT, 24 patients were treated with 3D standardized templates (ST group), and 19 patients were treated using free-hand implantation (FH group). Consistency of implantation for all needles and dosimetric differences for target and organs at risk (OARs) were then compared between two groups. Results: The mean variation of tip position between insertions for needles was 1.41 mm and 2.74 mm in ST group and FH group, respectively (p < 0.001). ST group was superior in terms of dosimetric conformity index (CI) and D90 for high-risk clinical target volume (HR-CTV), significantly improving to 23.21% (p < 0.001) and 3.58% (p = 0.031) compared with FH group. The D2cc of the bladder and sigmoid in the ST group were lower than those in the FH group (p < 0.05). Meanwhile, a strong correlation between the volume of HR-CTV and its CI in the ST group (R = 0.865, p < 0.001) was found with Spearman's correlation analysis. Conclusions: The implementation of 3D standardized template can potentially improve the precision and consistency in the needle insertion procedure that may replace some customized 3D templates, and achieve clinical satisfied dose distribution in IC/ISBT plans for patients with LACC.