Spontaneous Co-Assembly of Cellulose Nanocrystals and TiO2 Nanorods Followed by Calcination to Form Cholesteric Inorganic Nanostructures.

Chiral nanomaterials possess unique electronic, magnetic, and optical properties that are relevant to a wide range of applications including photocatalysis, chiral photonics, and biosensing. A simple, bottom-up method to create chiral, inorganic structures is introduced that involves the co-assembly of TiO2 nanorods with cellulose nanocrystals (CNCs) in water. To guide experimental efforts, a phase diagram was constructed to describe how phase behavior depends on the CNCs/TiO2/H2O composition. A lyotropic cholesteric mesophase was observed to extend over a wide composition range as high as 50 wt % TiO2 nanorods, far exceeding other examples of inorganic nanorods/CNCs co-assembly. Such a high loading enables the fabrication of inorganic, free-standing chiral films through removal of water and calcination. Distinct from the traditional templating method using CNCs, this new approach separates sol-gel synthesis from particle self-assembly using low-cost nanorods.

Identification and expression pattern of the sex determination gene fruitless-like in Cherax quadricarinatus.

The fruitless (fru) gene has an important function in the courtship behavior and sex determination pathway of Drosophila melanogaster; however, the fru gene has never been reported in shrimps. In this study, the fruitless-like gene was identified in Cherax quadricarinatus (Cqfru) and is reported here for the first time. A sequence analysis revealed a conserved BTB domain in Cqfru which is the same as fru in D. melanogaster. An analysis of the expression level of Cqfru showed that it was highly expressed in the gastrula stage during embryonic development. Furthermore, in situ hybridization and expression distribution in tissues showed that its sexually dimorphic expression may be focused on the hepatopancreas, brains, and gonads. The gonads, brains, and hepatopancreas of males had a higher expression level of Cqfru than those of females; however, the expression level of the abdominal ganglion was found to be higher in females than in males in this study. The results of an RNA interference treatment showed that a knockdown of Cqfru reduced the expression of the insulin-like androgenic gland hormone (IAG) and tumor necrosis factor (TNF). The characteristic fru gene in shrimps is reported here for the first time, with the results providing basic information for research into the sex-determination mechanism in C. quadricarinatus.

A concentrate-and-destroy technique for degradation of perfluorooctanoic acid in water using a new adsorptive photocatalyst.

Per- and polyfluoroalkyl substances (PFAS) have emerged as a major concern in aquatic systems worldwide due to their widespread applications and health concerns. Perfluorooctanoic acid (PFOA) is one of the most-detected PFAS. Yet, a cost-effective technology has been lacking for the degradation of PFAS due to their resistance to conventional treatment processes. To address this challenge, we prepared a novel adsorptive photocatalyst, referred to Fe/TNTs@AC, based on low-cost commercial activated carbon (AC) and TiO2. The composite material exhibited synergistic adsorption and photocatalytic activity and enabled a novel "concentrate-&-destroy" strategy for rapid and complete degradation of PFOA in water. Fe/TNTs@AC was able to adsorb PFOA within a few minutes, thereby effectively concentrating the target contaminant on the photoactive sites. Subsequently, Fe/TNTs@AC was able to degrade >90% of PFOA that was preconcentrated on the solid in 4 h under UV irradiation (254 nm, 21 mW cm‒2), of which 62% was completely mineralized to F-. The efficient photodegradation also regenerated Fe/TNTs@AC, eliminating the need for expensive chemical regenerants, and after six cycles of adsorption/photodegradation, the material showed no significant drop in adsorption capacity or photocatalytic activity. Simulations based on the density functional theory (DFT) revealed that Fe/TNTs@AC adsorbs PFOA in the side-on parallel mode, facilitating the subsequent photocatalytic degradation of PFOA. According to the DFT analysis, scavenger tests, and analysis of degradation intermediates, PFOA decomposition is initiated by direct hole oxidation, which activates the molecule and leads to a series of decarboxylation, C-F bond cleavage, and chain shortening reactions. The innovative "concentrate-&-destroy" strategy may significantly advance conventional adsorption or photochemical treatment of PFAS-contaminated water and holds the potential to degrade PFOA, and potentially other PFAS, more cost-effectively.

Size-controlled silver nanoparticles stabilized on thiol-functionalized MIL-53(Al) frameworks.

A postsynthetic modification method was used to prepare thiol-functionalized metal-organic frameworks (MOFs) by the amidation of mercaptoacetic acid with the amine group, which is present in the frameworks of NH2-MIL-53(Al). By doing this, the thiol group has been successfully grafted on the MOF, which perfectly combined the highly developed pore structures of the MOF with the strong coordination ability of the thiol group. The resulting thiol-functionalized MIL-53(Al) showed a significantly high adsorption capacity for heavy metal ions like Ag(+) (182.8 mg g(-1)). Even more importantly, these grafted thiol groups can be used as anchoring groups for stabilizing metal nanoparticles (NPs) with controllable sizes. Taking silver as an example, monodispersed Ag NPs encapsulated in the cages of MIL-53(Al) have been prepared by using a two-step procedure. In addition, the particle size of the Ag NPs was adjustable to some extent by controlling the initial loading amount. The average size of the smallest Ag NPs is 3.9 ± 0.9 nm, which is hard to obtain for Ag NPs because of their strong tendency to aggregate.

Size- and morphology-controlled NH2-MIL-53(Al) prepared in DMF-water mixed solvents.

We present here a simple solvothermal method to fabricate metal-organic framework NH2-MIL-53(Al) crystals with controllable size and morphology just by altering the ratio of water in the DMF-water mixed solvent system without the addition of any surfactants or capping agents. With increasing the volume ratio of water in the mixed solvents, a series of NH2-MIL-53(Al) crystals with different sizes and morphologies were synthesized. The average size of the smallest crystal is 76 ± 20 nm, which provides us a simple and environmentally friendly way to prepare nanoscale MOFs. The largest BET surface area of these samples is 1882 m(2) g(-1) that is mainly contributed by its micropore surface area, and its corresponding micropore volume is 0.83 cm(3) g(-1), which have greatly extended its application in the fields of gas adsorption and postsynthetic modification. All these samples were characterized by SEM, XRD, N2 adsorption/desorption, TGA and FT-IR. Then a mechanism for the impact of the water ratio on the crystal size and morphology is presented and discussed.