Selective Interbundle Cross-Linking for Lightweight and Superstrong Carbon Nanotube Yarns.

In this study, a range of carbon nanotube yarn (CNTY) architectures was examined and controlled by chemical modification to gain a deeper understanding of CNTY load-bearing systems and produce lightweight and superstrong CNTYs. The architecture of CNTY, which has polymer layers surrounding a compact bundle without hampering the original state of the CNTs in the bundle, is a favorable design for further chemical cross-linking and for enhancing the load-transfer efficiency, as confirmed by in situ Raman spectroscopy under a stress load. The resulting CNTY exhibited excellent mechanical performance that exceeded the specific strength of the benchmark, high-performance fibers. This exceptional strength of the CNTY makes it a promising candidate for the cable of a space elevator traveling from the Earth to the International Space Station given its strength of 4.35 GPa/(g cm-3), which can withstand the self-weight of a 440 km cable.

A General Approach to Preferential Formation of Active Fe-Nx Sites in Fe-N/C Electrocatalysts for Efficient Oxygen Reduction Reaction.

Iron-nitrogen on carbon (Fe-N/C) catalysts have emerged as promising nonprecious metal catalysts (NPMCs) for oxygen reduction reaction (ORR) in energy conversion and storage devices. It has been widely suggested that an active site structure for Fe-N/C catalysts contains Fe-Nx coordination. However, the preparation of high-performance Fe-N/C catalysts mostly involves a high-temperature pyrolysis step, which generates not only catalytically active Fe-Nx sites, but also less active large iron-based particles. Herein, we report a general "silica-protective-layer-assisted" approach that can preferentially generate the catalytically active Fe-Nx sites in Fe-N/C catalysts while suppressing the formation of large Fe-based particles. The catalyst preparation consisted of an adsorption of iron porphyrin precursor on carbon nanotube (CNT), silica layer overcoating, high-temperature pyrolysis, and silica layer etching, which yielded CNTs coated with thin layer of porphyrinic carbon (CNT/PC) catalysts. Temperature-controlled in situ X-ray absorption spectroscopy during the preparation of CNT/PC catalyst revealed the coordination of silica layer to stabilize the Fe-N4 sites. The CNT/PC catalyst contained higher density of active Fe-Nx sites compared to the CNT/PC prepared without silica coating. The CNT/PC showed very high ORR activity and excellent stability in alkaline media. Importantly, an alkaline anion exchange membrane fuel cell (AEMFC) with a CNT/PC-based cathode exhibited record high current and power densities among NPMC-based AEMFCs. In addition, a CNT/PC-based cathode exhibited a high volumetric current density of 320 A cm-3 in acidic proton exchange membrane fuel cell. We further demonstrated the generality of this synthetic strategy to other carbon supports.

Intrinsic relationship between enhanced oxygen reduction reaction activity and nanoscale work function of doped carbons.

Nanostructured carbon materials doped with a variety of heteroatoms have shown promising electrocatalytic activity in the oxygen reduction reaction (ORR). However, understanding of the working principles that underpin the superior ORR activity observed with doped nanocarbons is still limited to predictions based on theoretical calculations. Herein, we demonstrate, for the first time, that the enhanced ORR activity in doped nanocarbons can be correlated with the variation in their nanoscale work function. A series of doped ordered mesoporous carbons (OMCs) were prepared using N, S, and O as dopants; the triple-doped, N,S,O-OMC displayed superior ORR activity and four-electron selectivity compared to the dual-doped (N,O-OMC and S,O-OMC) and the monodoped (O-OMC) OMCs. Significantly, the work functions of these heteroatom-doped OMCs, measured by Kelvin probe force microscopy, display a strong correlation with the activity and reaction kinetics for the ORR. This unprecedented experimental insight can be used to provide an explanation for the enhanced ORR activity of heteroatom-doped carbon materials.

Nanoporous metal oxides with tunable and nanocrystalline frameworks via conversion of metal-organic frameworks.

Nanoporous metal oxide materials are ubiquitous in the material sciences because of their numerous potential applications in various areas, including adsorption, catalysis, energy conversion and storage, optoelectronics, and drug delivery. While synthetic strategies for the preparation of siliceous nanoporous materials are well-established, nonsiliceous metal oxide-based nanoporous materials still present challenges. Herein, we report a novel synthetic strategy that exploits a metal-organic framework (MOF)-driven, self-templated route toward nanoporous metal oxides via thermolysis under inert atmosphere. In this approach, an aliphatic ligand-based MOF is thermally converted to nanoporous metal oxides with highly nanocrystalline frameworks, in which aliphatic ligands act as the self-templates that are afterward evaporated to generate nanopores. We demonstrate this concept with hierarchically nanoporous magnesia (MgO) and ceria (CeO2), which have potential applicability for adsorption, catalysis, and energy storage. The pore size of these nanoporous metal oxides can be readily tuned by simple control of experimental parameters. Significantly, nanoporous MgO exhibits exceptional CO2 adsorption capacity (9.2 wt %) under conditions mimicking flue gas. This MOF-driven strategy can be expanded to other nanoporous monometallic and multimetallic oxides with a multitude of potential applications.

Ordered mesoporous carbon nitrides with graphitic frameworks as metal-free, highly durable, methanol-tolerant oxygen reduction catalysts in an acidic medium.

Developments of high-performance cost-effective electrocatalyts that can replace Pt catalysts have been a central theme in polymer electrolyte membrane fuel cells (PEMFCs) and direct methanol fuel cells (DMFCs). In this direction, nitrogen-doped carbon nanostructures free of metallic components have attracted particular attention. Here we show that directing graphitic carbon nitride frameworks into mesoporous architecture can generate a highly promising metal-free electrocatalyst for an oxygen reduction reaction (ORR) in an acidic medium. The ordered mesoporous carbon nitride (OMCN) was synthesized with a nanocasting strategy using ordered mesoporous silica as a template. A variety of characterizations revealed that the OMCN is constructed with graphitic carbon nitride frameworks and ordered arrays of uniform mesopores. The OMCN showed significantly enhanced electrocatalytic activity for ORR compared to bulk carbon nitride and ordered mesoporous carbon in terms of the current density and onset potential. A high surface area and an increased density of catalytically active nitrogen groups in the OMCN appear to contribute concomitantly to the enhanced performance of the OMCN. Furthermore, the OMCN exhibited superior durability and methanol tolerance to a Pt/C catalyst, suggesting its widespread utilization as an electrocatalyst for PEMFCs and DMFCs.

All-in-one flexible supercapacitor with ultrastable performance under extreme load.

Fiber-type solid-state supercapacitors are being widely investigated as stable power supply for next-generation wearable and flexible electronics. Integrating both high charge storage capability and superior mechanical properties into one fiber is crucial to realize fiber-type solid-state supercapacitors. In this study, we design a "jeweled necklace"­like hybrid composite fiber comprising double-walled carbon nanotube yarn and metal-organic frameworks (MOFs). Subsequent heat treatment transforms MOFs into MOF-derived carbon (MDC), thereby maximizing energy storage capability while retaining the superior mechanical properties. The hybrid fibers with tunable properties, including thickness and MDC loading amount, exhibit a high energy density of 7.54 milliwatt-hour per cubic centimeter at a power density of 190.94 milliwatt per cubic centimeter. The mechanical robustness of the hybrid fibers allows them to operate under various mechanical deformation conditions. Furthermore, it is demonstrated that the resulting superstrong fiber delivers sufficient power to switch on light-emitting diodes by itself while suspending 10-kilogram weight.

A chemically bonded supercapacitor using a highly stretchable and adhesive gel polymer electrolyte based on an ionic liquid and epoxy-triblock diamine network.

Despite significant advances in the development of flexible gel polymer electrolytes (GPEs), there are still problems to be addressed to apply them to flexible electric double layer capacitors (EDLCs), including interfacial interactions between the electrolyte and electrode under deformation. Previously reported EDLCs using GPEs have laminated structures with weak interfacial interactions between the electrode and electrolyte, leading to fragility upon elongation and low power density due to lower utilization of the surface area of the carbon material in the electrode. To overcome these problems, we present a new strategy for constructing an epoxy-based GPE that can provide strong adhesion between electrode and electrolyte. The GPE is synthesized by polymerization of epoxy and an ionic liquid. This GPE shows high flexibility up to 509% and excellent adhesive properties that enable strong chemical bonding between the electrode and electrolyte. Moreover, the GPE is stable at high voltage and high temperature with high ionic conductivity of ∼10-3 S cm-1. EDLCs based on the developed GPE exhibit good compatibility between the electrode and electrolyte and work properly when deformed. The EDLCs also show a high specific capacitance of 99 F g-1, energy density of 113 W h kg-1, and power density of 4.5 kW g-1. The excellent performance of the GPE gives it tremendous potential for use in next generation electronic devices such as wearable devices.

Skeletal octahedral nanoframe with Cartesian coordinates via geometrically precise nanoscale phase segregation in a Pt@Ni core-shell nanocrystal.

Catalytic properties of nanoparticles can be significantly enhanced by controlling nanoscale alloying and its structure. In this work, by using a facet-controlled Pt@Ni core-shell octahedron nanoparticle, we show that the nanoscale phase segregation can have directionality and be geometrically controlled to produce a Ni octahedron that is penetrated by Pt atoms along three orthogonal Cartesian axes and is coated by Pt atoms along its edges. This peculiar anisotropic diffusion of Pt core atoms along the ⟨100⟩ vertex, and then toward the ⟨110⟩ edges, is explained via the minimum strain energy for Ni-Ni pair interactions. The selective removal of the Ni-rich phase by etching then results in structurally fortified Pt-rich skeletal PtNi alloy framework nanostructures. Electrochemical evaluation of this hollow nanoframe suggests that the oxygen reduction reaction (ORR) activity is greatly improved compared to conventional Pt catalysts.

Monolayer-precision synthesis of molybdenum sulfide nanoparticles and their nanoscale size effects in the hydrogen evolution reaction.

Metal sulfide-based nanostructured materials have emerged as promising catalysts for hydrogen evolution reaction (HER), and significant progress has been achieved in enhancing their activity and durability for the HER. The understanding of nanoscale size-dependent catalytic activities can suggest critical information regarding catalytic reactivity, providing the scientific basis for the design of advanced catalysts. However, nanoscale size effects in metal sulfide-based HER catalysts have not yet been established fully, due to the synthetic difficulty in precisely size-controlled metal sulfide nanoparticles. Here we report the preparation of molybdenum sulfide (MoS2) nanoparticles with monolayer precision from one to four layers with the nearly constant basal plane size of 5 nm, and their size-dependent catalytic activity in the HER. Using density functional theory (DFT) calculations, we identified the most favorable single-, double-, and triple-layer MoS2 model structures for the HER, and calculated elementary step energetics of the HER over these three model structures. Combining HER activity measurements and the DFT calculation results, we establish that the turnover frequency of MoS2 nanoparticles in the HER increases in a quasi-linear manner with decreased layer numbers. Cobalt-promoted MoS2 nanoparticles also exhibited similar HER activity trend. We attribute the higher HER activity of smaller metal sulfide nanoparticles to the higher degree of oxidation, higher Mo-S coordination number, formation of the 1T phase, and lower activation energy required to overcome transition state. This insight into the nanoscale size-dependent HER activity trend will facilitate the design of advanced HER catalysts as well as other hydrotreating catalysts.

Synthesis of ordered mesoporous phenanthrenequinone-carbon via π-π interaction-dependent vapor pressure for rechargeable batteries.

The π-π interaction-dependent vapour pressure of phenanthrenequinone can be used to synthesize a phenanthrenequinone-confined ordered mesoporous carbon. Intimate contact between the insulating phenanthrenequinone and the conductive carbon framework improves the electrical conductivity. This enables a more complete redox reaction take place. The confinement of the phenanthrenequinone in the mesoporous carbon mitigates the diffusion of the dissolved phenanthrenequinone out of the mesoporous carbon, and improves cycling performance.

Ordered mesoporous porphyrinic carbons with very high electrocatalytic activity for the oxygen reduction reaction.

The high cost of the platinum-based cathode catalysts for the oxygen reduction reaction (ORR) has impeded the widespread application of polymer electrolyte fuel cells. We report on a new family of non-precious metal catalysts based on ordered mesoporous porphyrinic carbons (M-OMPC; M = Fe, Co, or FeCo) with high surface areas and tunable pore structures, which were prepared by nanocasting mesoporous silica templates with metalloporphyrin precursors. The FeCo-OMPC catalyst exhibited an excellent ORR activity in an acidic medium, higher than other non-precious metal catalysts. It showed higher kinetic current at 0.9 V than Pt/C catalysts, as well as superior long-term durability and MeOH-tolerance. Density functional theory calculations in combination with extended X-ray absorption fine structure analysis revealed a weakening of the interaction between oxygen atom and FeCo-OMPC compared to Pt/C. This effect and high surface area of FeCo-OMPC appear responsible for its significantly high ORR activity.

In situ-generated metal oxide catalyst during CO oxidation reaction transformed from redox-active metal-organic framework-supported palladium nanoparticles.

The preparation of redox-active metal-organic framework (ra-MOF)-supported Pd nanoparticles (NPs) via the redox couple-driven method is reported, which can yield unprotected metallic NPs at room temperature within 10 min without the use of reducing agents. The Pd@ra-MOF has been exploited as a precursor of an active catalyst for CO oxidation. Under the CO oxidation reaction condition, Pd@ra-MOF is transformed into a PdOx-NiOy/C nanocomposite to generate catalytically active species in situ, and the resultant nanocatalyst shows sustainable activity through synergistic stabilization.

Highly interconnected ordered mesoporous carbon-carbon nanotube nanocomposites: Pt-free, highly efficient, and durable counter electrodes for dye-sensitized solar cells.

We report the preparation of highly interconnected ordered mesoporous carbon-carbon nanotube nanocomposites which show Pt-like dye-sensitized solar cell (DSSC) efficiency and remarkable long-term durability as DSSC counter electrodes.

Ultrathin titania coating for high-temperature stable SiO2/Pt nanocatalysts.

The facile synthesis of silica supported platinum nanoparticles with ultrathin titania coating to enhance metal-support interactions suitable for high temperature reactions is reported, as thermal and structure stability of metal nanoparticles is important for catalytic reactions.