Targeted next-generation sequencing makes new molecular diagnoses and expands genotype-phenotype relationship in Ehlers-Danlos syndrome.

PURPOSE: Ehlers-Danlos syndrome (EDS) comprises a group of overlapping hereditary disorders of connective tissue with significant morbidity and mortality, including major vascular complications. We sought to identify the diagnostic utility of a next-generation sequencing (NGS) panel in a mixed EDS cohort. METHODS: We developed and applied PCR-based NGS assays for targeted, unbiased sequencing of 12 collagen and aortopathy genes to a cohort of 177 unrelated EDS patients. Variants were scored blind to previous genetic testing and then compared with results of previous Sanger sequencing. RESULTS: Twenty-eight pathogenic variants in COL5A1/2, COL3A1, FBN1, and COL1A1 and four likely pathogenic variants in COL1A1, TGFBR1/2, and SMAD3 were identified by the NGS assays. These included all previously detected single-nucleotide and other short pathogenic variants in these genes, and seven newly detected pathogenic or likely pathogenic variants leading to clinically significant diagnostic revisions. Twenty-two variants of uncertain significance were identified, seven of which were in aortopathy genes and required clinical follow-up. CONCLUSION: Unbiased NGS-based sequencing made new molecular diagnoses outside the expected EDS genotype-phenotype relationship and identified previously undetected clinically actionable variants in aortopathy susceptibility genes. These data may be of value in guiding future clinical pathways for genetic diagnosis in EDS.Genet Med 18 11, 1119-1127.

Reducing contact forces in the arch and supra-aortic vessels using the Magellan robot.

OBJECTIVE: Conventional catheter manipulation in the arch and supra-aortic trunks carries a risk of cerebral embolization. This study proposes a platform for detailed quantitative analysis of contact forces (CF) exerted on the vasculature, in order to investigate the potential advantages of robotic navigation. METHODS: An anthropomorphic phantom representing a type I bovine arch was mounted and coupled onto a force/torque sensor. Three-axis force readings provided an average root-mean-square modulus, indicating the total forces exerted on the phantom. Each of the left subclavian, left common carotid, and right common carotid arteries was cannulated within a simulated endovascular suite with conventional (n = 42) vs robotic techniques (n = 30) by two operator groups: experts and novices. The procedure path was divided into three phases, and performance metrics corresponding to mean and maximum forces, force impact over time, standard deviation of forces, and number of significant catheter contacts with the arterial wall were extracted. RESULTS: Overall, median CF were reduced from 1.20 N (interquartile range [IQR], 0.98-1.56 N) to 0.31 N (IQR, 0.26-0.40 N; P < .001) for the right common carotid artery; 1.59 N (IQR, 1.11-1.85 N) to 0.33 N (IQR, 0.29-0.43 N; P < .001) for the left common carotid artery; and 0.84 N (IQR, 0.47-1.08 N) to 0.10 N (IQR, 0.07-0.17 N; P < .001) for the left subclavian artery. Robotic navigation resulted in significant reductions for the mean and maximum forces for each procedural phase. Significant improvements were also seen in other metrics, particularly at the target vessel ostium and for the more anatomically challenging procedural phases. Force reductions using robotic technology were evident for both novice and expert groups. CONCLUSIONS: Robotic navigation can potentially reduce CF and catheter-tissue contact points in an in vitro model, by enhancing catheter stability and control during endovascular manipulation.

Leiomyosarcoma of the thoracic aorta in a patient with hypertrophic cardiomyopathy.

We report a case of leiomyosarcoma of the thoracic aorta in a 49-year-old male patient with history of hypertrophic cardiomyopathy. The only presenting symptom was back pain localized under the left scapula with the frequency and severity of the pain increasing with time. Imaging studies detected the presence of an aortic tumor. The tumor was excised en bloc, and an interposition graft was implanted. The histology showed a fully excised grade 3 leiomyosarcoma. This article discusses features of this rare condition.

New-generation stent grafts for endovascular management of thoracic pseudoaneurysms after aortic coarctation repair.

OBJECTIVE: Late thoracic aneurysms develop in 5% to 12% of patients having undergone open repair for coarctation of the aorta (CoA). We report our early results for thoracic endovascular aortic repair for pseudoaneurysms after CoA repair. METHODS: From 2008 to 2013, data regarding demographics, aneurysm morphology, procedure, and follow-up were collected prospectively on all patients treated for pseudoaneurysms after CoA repair. Retrospective analysis of identified patients was then performed. RESULTS: Thirteen patients (six men, seven women) were treated. Patients were a median age, 45 years (interquartile range (IQR), 39-56; range, 27-66 years, and the median time after CoA repair to aneurysm treatment was 34 years (IQR, 24-40 years). All patients had saccular pseudoaneurysms of the aortic arch, with a median aneurysm size of 4.1 cm (IQR, 3.4-5.1 cm). The left subclavian artery (LSCA) was involved in 10 patients and was occluded at presentation in three. Four patients had concurrent LSCA revascularization with carotid-subclavian bypass, one had aortic arch hybrid repair, and the LSCA was intentionally covered in two patients. Patients underwent thoracic endovascular aortic repair using the conformable TAG (6 of 13; W. L. Gore & Associates, Flagstaff, Ariz), Valiant device (4 of 13; Medtronic, Minneapolis, Minn), and a custom-made Relay endograft with LSCA scallop (4 of 13; Bolton Medical, Barcelona, Spain). Technical success was 100%, with satisfactory deployment of the stent grafts in all patients. There was no 30-day mortality, stroke, or paraplegia. Median follow-up was 15 months (IQR, 9-19 months; range, 1-67 months). Two type II endoleaks from an intercostal artery were managed conservatively, and one type Ib endoleak was treated successfully with distal stent extension. CONCLUSIONS: In this cohort, new-generation stent grafts have good early clinical and radiologic outcomes, avoiding the need for redo open surgery. Management of the LSCA can be tailored to individual patients with new stent graft technology. Long-term follow-up of these patients is crucial to understanding whether endovascular management of this cohort is acceptable.

Endovascular treatment of thoracic aortic aneurysms with a short proximal landing zone using scalloped endografts.

BACKGROUND: The suitability of the proximal landing zone remains one of the main limitations to thoracic endovascular aortic repair (TEVAR). The advent of custom-made scalloped stent grafts widens the endovascular options for patients with challenging anatomy. The objective of this study was to present our early and midterm results of custom-made scalloped thoracic stent grafts. METHODS: Prospectively acquired data relating to patient demographics, procedure details, clinical outcome, and complications were analyzed. In addition, we analyzed preoperative and postoperative computed tomography scans to evaluate aneurysm morphology, graft placement, side-vessel patency, and endoleaks. RESULTS: Twenty-one patients with a median age of 71 years (range, 35-81 years) underwent custom-made scalloped TEVAR, eight of whom had a concomitant hybrid repair. Procedural success was achieved in all cases. Proximal seal was achieved in all cases, with no type I endoleaks. There were no cases of retrograde dissection and no conversions to open repair. The median follow-up period was 36 weeks (range, 3-183 weeks). Two patients died in the hospital. Three patients suffered a stroke. Three patients had a type II endoleak, one of whom had significant sac enlargement requiring reintervention. One patient had a type III endoleak requiring reintervention. There were no cases of graft migration. CONCLUSIONS: Our midterm results show that custom-made scalloped TEVAR is an acceptable treatment of thoracic aortic aneurysms with a short proximal landing zone. Longer term outcome data are required to establish wider use of scalloped thoracic endografts.

Renal artery aneurysm formation secondary to pseudoxanthoma elasticum.

This report describes a patient with pseudoxanthoma elasticum (PXE) who presented with an incidental finding of a renal artery aneurysm. PXE is a rare genetic condition. It is associated with calcification of elastin fibers and is characterized by skin, eye, and cardiovascular complications. Our patient was previously treated for retinal and gastrointestinal hemorrhage and coronary artery disease, and is under surveillance for cerebral aneurysms. Five reports in the published literature have described aneurysms in patients with PXE, but, to our knowledge, this is the first report of a patient with PXE and renal artery aneurysm. The literature on PXE and aneurysms is reviewed.

Initial findings and potential applicability of computational simulation of the aorta in acute type B dissection.

OBJECTIVE: Type B aortic dissection can be acutely complicated by rapid expansion, rupture, and malperfusion syndromes. Short-term adverse outcomes are associated with failure of the false lumen to thrombose. The reasons behind false lumen patency are poorly understood, and the objective of this pilot study was to use computational fluid dynamics reconstructions of aortic dissection cases to analyze the effect of aortic and primary tear morphology on flow characteristics and clinical outcomes in patients with acute type B dissections. METHODS: Three-dimensional patient-specific aortic dissection geometry was reconstructed from computed tomography scans of four patients presenting with acute type B aortic dissection and a further patient with sequential follow-up scans. The cases were selected based on their clinical presentation. Two were complicated by acute malperfusion that required emergency intervention. Three patients were uncomplicated and were managed conservatively. The patient-specific aortic models were used in computational simulations to assess the effect of aortic tear morphology on various parameters including flow, velocity, shear stress, and turbulence. RESULTS: Pulsatile flow simulation results showed that flow rate into the false lumen was dependent on both the size and position of the primary tear. Linear regression analysis demonstrated a significant relationship between percentage flow entering the false lumen and the size of the primary entry tear and an inverse relationship between false lumen flow and the site of the entry tear. Subjects complicated by malperfusion had larger-dimension entry tears than the uncomplicated cases (93% and 82% compared with 32% and 55%, respectively). Blood flow, wall shear stress, and turbulence levels varied significantly between subjects depending on aortic geometry. Highest wall shear stress (>7 Pa) was located at the tear edge, and progression of false lumen thrombosis was associated with prolonged particle residence times. CONCLUSIONS: Results obtained from this preliminary work suggest that aortic morphology and primary entry tear size and position exert significant effects on flow and other hemodynamic parameters in the dissected aorta in this preliminary work. Blood flow into the false lumen increases with increasing tear size and proximal location. Morphologic analysis coupled with computational fluid dynamic modeling may be useful in predicting acute type B dissection behavior allowing for selection of proper treatment modalities, and further confirmatory studies are warranted.

In vitro fenestration of aortic stent-grafts: implications of puncture methods for in situ fenestration durability.

PURPOSE: To investigate the quality of stent-graft fenestrations created in vitro using different needle puncture and balloon dilation angles in different commercial endografts. METHODS: Fenestrations were made in a standardized fashion in 3 different endograft types: Talent monofilament twill woven polyester, Zenith multifilament tubular woven polyester, and Endofit thin-walled expanded polytetrafluoroethylene (PTFE). Punctures were made at 30°, 60°, and 90° angles using a 20-G needle and dilated using 6-mm standard and 7-mm cutting balloons; at least 6 fenestrations were made at each angle with standard balloons and at least 6 with cutting balloons. The 137 fenestrations were examined under light microscopy; quantitative and qualitative digital image analysis was performed to determine size, shape, and fenestration quality. RESULTS: PTFE grafts were easier to puncture/dilate, resulting in larger, elliptical fenestrations with overall better quality than the Dacron grafts; however, the puncture/dilation angle made an impact on the shape and quality of fenestrations. A significant number of fabric tears were observed in PTFE fabric at <90° puncture/dilation angles compared to Dacron grafts. In Dacron grafts, fenestration quality was significantly higher with 90° puncture/dilation angles (higher in Talent grafts). Cutting balloon use resulted in significantly more fabric tears and poor quality fenestrations in all graft types. CONCLUSION: Different endografts behave significantly differently when fenestrations are fashioned. Optimum puncture/dilation is important when considering in vivo fenestration techniques. Improvements in instrumentation, materials, and techniques are required to make this a reliable and reproducible endovascular option.

Robot-assisted fenestrated endovascular aneurysm repair (FEVAR) using the Magellan system.

A 67-year-old man underwent robot-assisted three-vessel fenestrated endovascular aneurysm repair (FEVAR) for a 7.3-cm juxtarenal aneurysm. The 6-F robotic catheter was manipulated from a remote workstation, away from the radiation source. Robotic cannulation of the left renal artery was achieved within 3 minutes. System setup time was 5 minutes. There were no postoperative complications. Computed tomography angiography performed at discharge and at 4-month follow-up confirmed target vessel patency with no evidence of an endoleak. Selective cannulation of target vessels during FEVAR using this novel technology is feasible. Endovascular robotics may have a role in simplifying complex endovascular tasks and potentially reducing radiation exposure to the operator.

Salmonella mycotic thoracoabdominal aortic aneurysm associated with chronic lymphocytic leukemia.

Non-typhoidal Salmonella infections typically cause self-limiting gastroenteritis. However, extraintestinal focal infections, including mycotic aneurysms of the aorta, can also occur. We present the case of a 71-year-old man with chronic lymphocytic leukemia (CLL) and a large type V thoracoabdominal mycotic aneurysm infected with Salmonella enteritidis, complicated by thoracolumbar spondylodiscitis, paravertebral collections, and epidural abscess. This is the first report of Salmonella aortitis in the setting of CLL, and the unusual extent of local infective invasion seen here with Salmonella enteritidis infection raises a suspicion of CLL-related immunosuppression as a direct predisposing factor. This case illustrates the need to consider the possibility of an immune defect, even in CLL patients with normal leukocyte counts. The underlying mechanisms are unclear, but are likely to involve defects in cell-mediated immunity, thought to be of particular importance in invasive infections with intracellular pathogens such as Salmonella spp.

Evaluation of Different Cannulation Strategies for Aortic Arch Surgery Using a Cardiovascular Numerical Simulator.

Aortic disease has a significant impact on quality of life. The involvement of the aortic arch requires the preservation of blood supply to the brain during surgery. Deep hypothermic circulatory arrest is an established technique for this purpose, although neurological injury remains high. Additional techniques have been used to reduce risk, although controversy still remains. A three-way cannulation approach, including both carotid arteries and the femoral artery or the ascending aorta, has been used successfully for aortic arch replacement and redo procedures. We developed circuits of the circulation to simulate blood flow during this type of cannulation set up. The CARDIOSIM© cardiovascular simulation platform was used to analyse the effect on haemodynamic and energetic parameters and the benefit derived in terms of organ perfusion pressure and flow. Our simulation approach based on lumped-parameter modelling, pressure-volume analysis and modified time-varying elastance provides a theoretical background to a three-way cannulation strategy for aortic arch surgery with correlation to the observed clinical practice.

Simulated procedure rehearsal is more effective than a preoperative generic warm-up for endovascular procedures.

INTRODUCTION: Patient-specific simulated rehearsal (PsR) of a carotid artery stenting procedure (CAS) enables the interventionalist to rehearse the case before performing the procedure on the actual patient by incorporating patient-specific computed tomographic data into the simulation software. This study aimed to evaluate whether PsR of a CAS procedure can enhance the operative performance versus a virtual reality (VR) generic CAS warm-up procedure or no preparation at all. METHODS: During a 10-session cognitive/technical VR course, medical residents were trained in CAS. Thereafter, in a randomized crossover study, each participant performed a patient-specific CAS case 3 times on the simulator, preceded by 3 different tasks: a PsR, a generic case, or no preparation. Technical performances were assessed using simulator-based metrics and expert-based ratings. RESULTS: Twenty medical residents (surgery, cardiology, radiology) were recruited. Training plateaus were observed after 10 sessions for all participants. Performances were significantly better after PsR than after a generic warm-up or no warm-up for total procedure time (16.3 ± 0.6 vs 19.7 ± 1.0 vs 20.9 ± 1.1 minutes, P = 0.001) and fluoroscopy time (9.3 ± 0.1 vs 11.2 ± 0.6 vs 11.2 ± 0.5 minutes, P = 0.022) but did not influence contrast volume or number of roadmaps used during the "real" case. PsR significantly improved the quality of performance as measured by the expert-based ratings (scores 28 vs 25 vs 25, P = 0.020). CONCLUSIONS: Patient-specific simulated rehearsal of a CAS procedure significantly improves operative performance, compared to a generic VR warm-up or no warm-up. This technology requires further investigation with respect to improved outcomes on patients in the clinical setting.

Reducing error and improving efficiency during vascular interventional radiology: implementation of a preprocedural team rehearsal.

PURPOSE: To determine the type and frequency of errors during vascular interventional radiology (VIR) and design and implement an intervention to reduce error and improve efficiency in this setting. MATERIALS AND METHODS: Ethical guidance was sought from the Research Services Department at Imperial College London. Informed consent was not obtained. Field notes were recorded during 55 VIR procedures by a single observer. Two blinded assessors identified failures from field notes and categorized them into one or more errors by using a 22-part classification system. The potential to cause harm, disruption to procedural flow, and preventability of each failure was determined. A preprocedural team rehearsal (PPTR) was then designed and implemented to target frequent preventable potential failures. Thirty-three procedures were observed subsequently to determine the efficacy of the PPTR. Nonparametric statistical analysis was used to determine the effect of intervention on potential failure rates, potential to cause harm and procedural flow disruption scores (Mann-Whitney U test), and number of preventable failures (Fisher exact test). RESULTS: Before intervention, 1197 potential failures were recorded, of which 54.6% were preventable. A total of 2040 errors were deemed to have occurred to produce these failures. Planning error (19.7%), staff absence (16.2%), equipment unavailability (12.2%), communication error (11.2%), and lack of safety consciousness (6.1%) were the most frequent errors, accounting for 65.4% of the total. After intervention, 352 potential failures were recorded. Classification resulted in 477 errors. Preventable failures decreased from 54.6% to 27.3% (P < .001) with implementation of PPTR. Potential failure rates per hour decreased from 18.8 to 9.2 (P < .001), with no increase in potential to cause harm or procedural flow disruption per failure. CONCLUSION: Failures during VIR procedures are largely because of ineffective planning, communication error, and equipment difficulties, rather than a result of technical or patient-related issues. Many of these potential failures are preventable. A PPTR is an effective means of targeting frequent preventable failures, reducing procedural delays and improving patient safety.

Improving results for carotid artery stenting by validation of the anatomic scoring system for carotid artery stenting with patient-specific simulated rehearsal.

OBJECTIVE: Carotid artery stenting (CAS) is a technically demanding procedure with a risk of periprocedural stroke. A scoring system based on anatomic criteria has been developed to facilitate patient selection for CAS. Advancements in simulation science also enable case evaluation through patient-specific virtual reality (VR) rehearsal on an endovascular simulator. This study aimed to validate the anatomic scoring system for CAS using the patient-specific VR technology. METHODS: Three patients were selected and graded according to the CAS scoring system (maximum score, 9): one easy (score, <4.9), one intermediate (score, 5.0-5.9), and one difficult (score, >7.0). The three cases were performed on the simulator in random order by 20 novice interventionalists pretrained in CAS. Technical performances were assessed using simulator-based metrics and expert-based ratings. RESULTS: The interventionalists took significantly longer to perform the difficult CAS case (median, 31.6 vs 19.7 vs 14.6 minutes; P<.0001) compared with the intermediate and easy cases; similarly, more fluoroscopy time (20.7 vs 12.1 vs 8.2 minutes; P<.0001), contrast volume (56.5 vs 51.5 vs 50.0 mL; P=.0060), and roadmaps (10 vs 9 vs 9; P=.0040) were used. The quality of performance declined significantly as the cases became more challenging (score, 24 vs 22 vs 19; P<.0001). CONCLUSIONS: The anatomic scoring system for CAS can predict the difficulty of a CAS procedure as measured by patient-specific VR. This scoring system, with or without the additional use of patient-specific VR, can guide novice interventionalists in selecting appropriate patients for CAS. This may reduce the perioperative stroke risk and enhance patient safety.

Reducing errors in combined open/endovascular arterial procedures: influence of a structured mental rehearsal before the endovascular phase.

PURPOSE: To assess the incidence of errors before and after implementation of a structured mental rehearsal prior to the endovascular phase of combined open/endovascular arterial procedures. METHODS: Over 6 weeks, 15 combined open/endovascular procedures (7 abdominal aorta and 8 thoracic aorta) lasting 58 hours were evaluated by a trained observer. In a blinded fashion, 2 individuals scrutinized event logs for errors, which were categorized by type, by potential to cause patient harm (danger), and by potential to disrupt the procedure (delay). After 9 procedures, a focus group-devised structured mental rehearsal was implemented prior to the endovascular phase for 6 combined procedures. Error patterns were compared before and after implementation. Data are expressed as median (range). RESULTS: The error rate during the endovascular phase of the combined procedures was higher than the non-endovascular phase [7.64/hour (1.71-9.6) vs. 3.75/hour (1.71-5.54), respectively; p = 0.05]. Error rates during the endovascular phase were lower after the intervention compared to before [2.5/hour (1.4-6.0) vs. 7.6/hour (1.7-9.6), respectively; p = 0.05]. During the endovascular phase, danger and delay scores were also lower after the intervention [1.2/error (1.0-2.0) and 1.3/error (1.0-2.3), respectively] compared to before [1.75/error (1.4-2.5) and 2.0/error (1.3-2.5), respectively] (p = 0.036 and p = 0.036 for danger and delay, respectively). CONCLUSION: A structured mental rehearsal before critical stages of procedures may reduce the rate and severity of intraoperative error.

Recent advancements in medical simulation: patient-specific virtual reality simulation.

BACKGROUND: Patient-specific virtual reality simulation (PSVR) is a new technological advancement that allows practice of upcoming real operations and complements the established role of VR simulation as a generic training tool. This review describes current developments in PSVR and draws parallels with other high-stake industries, such as aviation, military, and sports. METHODS: A review of the literature was performed using PubMed and Internet search engines to retrieve data relevant to PSVR in medicine. All reports pertaining to PSVR were included. Reports on simulators that did not incorporate a haptic interface device were excluded from the review. RESULTS: Fifteen reports described 12 simulators that enabled PSVR. Medical procedures in the field of laparoscopy, vascular surgery, orthopedics, neurosurgery, and plastic surgery were included. In all cases, source data was two-dimensional CT or MRI data. Face validity was most commonly reported. Only one (vascular) simulator had undergone face, content, and construct validity. Of the 12 simulators, 1 is commercialized and 11 are prototypes. Five simulators have been used in conjunction with real patient procedures. CONCLUSIONS: PSVR is a promising technological advance within medicine. The majority of simulators are still in the prototype phase. As further developments unfold, the validity of PSVR will have to be examined much like generic VR simulation for training purposes. Nonetheless, similar to the aviation, military, and sport industries, operative performance and patient safety may be enhanced by the application of this novel technology.

Strategies to tackle unrecognized bilateral renal artery occlusion after endovascular aneurysm repair.

BACKGROUND: Unintentional renal artery occlusion after endovascular aortic aneurysm repair (EVAR) is an uncommon phenomenon. The sequelae from this specific complication are severe; consequently, the topic of renal artery coverage is a pertinent issue. We present a case series of patients undergoing EVAR with unintentional renal artery coverage, review the treatment options available, and suggest a treatment algorithm for this scenario based on the evidence. METHODS AND RESULTS: We report four patients who were found to have renal artery occlusion after EVAR detected up to 5 weeks postoperatively. Renal revascularization was achieved using endovascular renal artery stenting in two patients, and open hepato-spleno-renal bypass in the remaining two cases. Treatment strategies used led to symptom resolution and recovery of renal function in all cases. CONCLUSIONS: Both open and endovascular techniques may be used as procedures to treat this condition-the choice of procedure is primarily determined by accessibility of the renal orifice.

Lower-limb ischemia in the young patient: management strategies in an endovascular era.

BACKGROUND: The aim of this paper is to review the potential role of endovascular interventions for young patients with lower-limb ischaemia. METHODS: A literature search was performed of PubMed and Medline databases using appropriate search terms and limits. Case reports, retrospective studies, and prospective studies evaluating treatment of lower-limb ischemia in patients aged <50 years were scrutinized. Articles published between 1966 and 2010 were included in this review. RESULTS: Premature atherosclerosis is likely to represent the commonest cause of lower-limb ischemia in patients aged <50 years, although the incidence of nonatherosclerotic causes such as popliteal entrapment syndrome, cystic adventitial disease, and arteritis in these patients is greater than in older patients. As with older patients, endovascular interventions may be beneficial for patients with symptoms secondary to atherosclerosis. At present, the perceived durability of open surgery may be more preferable to patients aged <50 years, but the development of new endovascular technology is challenging this view. Endovascular interventions such as catheter-directed thrombolysis have specific roles in the treatment of lower-limb ischemia due to nonatherosclerotic causes. CONCLUSION: The use of angioplasty and stenting procedures to treat young patients with lower-limb ischemia is increasing and has specific roles. However, many developmental causes and nonatherosclerotic conditions still require primary surgical correction.

Evaluation of robotic endovascular catheters for arch vessel cannulation.

OBJECTIVE: Conventional catheter instability and embolization risk limits the adoption of endovascular therapy in patients with challenging arch anatomy. This study investigated whether arch vessel cannulation can be enhanced by a remotely steerable robotic catheter system. METHODS: Seventeen clinicians with varying endovascular experience cannulated all arch vessels within two computed tomography-reconstructed pulsatile flow phantoms (bovine type I and type III aortic arches), under fluoroscopic guidance, using conventional and robotic techniques. Quantitative (catheterization times, catheter tip movements, vessel wall hits, catheter deflection) and qualitative metrics (Imperial College Complex Endovascular Cannulation Scoring Tool [IC3ST]) performance scores were compared. RESULTS: Robotic catheterization techniques resulted in a significant reduction in median carotid artery cannulation times and the median number of catheter tip movements for all vessels. Vessel wall contact with the aortic arch wall was reduced to a median of zero with robotic catheters. During stiff guidewire exchanges, robotic catheters maintained stability with zero deflection, independent of the distance the catheter was introduced into the carotid vessels. Overall IC3ST performance scores (interquartile range) were significantly improved using the robotic system: Type I arch score was 26/35 (20-30.8) vs 33/35 (31-34; P = .001), and type III arch score was 20.5/35 (16.5-28.5) vs 26.5/35 (23.5-28.8; P = .001). Low- and medium-volume interventionalists demonstrated an improvement in performance with robotic cannulation techniques. The high-volume intervention group did not show statistically significant improvement, but cannulation times, movements, and vessel wall hits were significantly reduced. CONCLUSION: Robotic technology has the potential to reduce the time, risk of embolization and catheter dislodgement, radiation exposure, and the manual skill required for carotid and arch vessel cannulation, while improving overall performance scores.

Skills training after night shift work enables acquisition of endovascular technical skills on a virtual reality simulator.

BACKGROUND: Adoption of residents' working time restrictions potentially undermines surgical training by reduction of operating room exposure. Simulation has been proposed as a way to acquire necessary skills in a laboratory environment but remains difficult to incorporate into training schedules. This study assessed whether residents working successive nights could acquire endovascular skills similar to colleagues working day shifts. METHODS: This prospective observational cohort study recruited 20 junior residents, divided into day shift and night shift groups by their respective call schedule. After initial cognitive skills training, a validated renal artery stent module on an endovascular simulator was completed over a series of seven sequential shifts during 1 week. The primary outcome measure was serial technical skill assessments. Secondary measures comprised assessments of activity, cognitive performance, introspective fatigue, quality, and quantity of preceding sleep. RESULTS: Both groups demonstrated significant learning curves for total time at the first session median vs seventh session median (181 vs 564 seconds [P < .001]; night, 1399 vs 572 [P < .001]), fluoroscopy time (day, 702 vs 308 seconds, [P < .001]; night, 669 vs 313 [P < .001]), and contrast volume (day, 29 vs 13 mL [P < .001]; night, 40 vs 16 [P < .001]). Residents working day shifts reached plateau 1 day earlier in the above measures vs those on night duty. The night shift group walked more steps (P < .001), reviewed more patients (P < .001), performed worse on all cognitive assessments (P < .05), slept less (P < .05), had poorer quality of sleep (P = .001), and was more fatigued (P < .001) than the day shift group. Acquired skill was retained a week after completion of shifts. CONCLUSION: Technical skills training after night shift work enables acquisition of endovascular technical skills, although it takes longer than after day shift training. This study provides evidence for program directors to organize simulation-based training schedules for residents on night shift rotations.