Molecular Weight Distribution of Two Types of Living Chains Formed during Nitroxide-Mediated Polymerization of Styrene.

Different types of polymer chains generated during the nitroxide-mediated polymerization of styrene are separated for the first time, and their molecular weight distribution (MWD) is investigated. Living and dead chains are monitored during the reaction; specifically, two types of living chains derived from the initiation of the alkoxyamine (RT) and the self-initiation of styrene and dead chains present in the as-prepared polystyrene (PS). To distinguish between each polymer species, different numbers of hydroxyl groups are introduced onto the T and R groups of the alkoxyamine (one and two groups, respectively). Each living and dead chains is resolved according to the distinct number of hydroxyl groups on its chain-end using high-performance liquid chromatography. Molecular structures of the fractionated PS are characterized using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and 1 H nuclear magnetic resonance spectroscopy, and the results of which show two distinct initiation paths: one originating from RT and the other from the self-initiation of styrene. Molecular weight and MWD are measured using size-exclusion chromatography and reveal a narrow MWD for the living chains derived from RT. Contrastingly, a broad and skewed MWD is observed for the other living chains derived from the self-initiation of styrene and the dead chains.

Redox-Initiated Reversible Addition-Fragmentation Chain Transfer (RAFT) Miniemulsion Polymerization of Styrene using PPEGMA-Based Macro-RAFT Agent.

Redox-initiated reversible addition-fragmentation chain transfer (RAFT) miniemulsion polymerizations are successfully conducted with an employment of trithiocarbonate-based macro-RAFT agents and surfactant. Two macro-RAFT agents-hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate) (PPEGMA27 ) and amphiphilic poly(poly(ethylene glycol) methyl ether methacrylate)-b-polystyrene (PPEGMA27 -b-PS33 )- are examined for the miniemulsion polymerization of styrene. The use of PPEGMA27 (in the presence of sodium dodecyl sulfate (SDS)) results in a slow polymerization rate with a broad particle size. In the absence of SDS, the use of PPEGMA27 -b-PS33 results in a broad particle size distribution due to its inability to form uniform initial droplets whereas the same amphiphilic block copolymer in the presence of SDS yields resulting products with a uniform particle size distribution. The latter exhibits a fashion of controlled polymerization with a high consumption of monomer (98% in 100 min) and a narrow molecular weight distribution throughout the polymerization. This is attributed to the formation of uniform droplets facilitated by SDS in a miniemulsion. The amphiphilic macro-RAFT agent is able to anchor efficiently on the monomer droplet or particle/water interface and form stabilized particles of well-defined PPEGMA27 -b-PS block copolymer, confirmed using dynamic light scattering and transmission electron micrographs.

Atom Transfer Radical Polymerization in the Solid-State.

Poly(2-vinylnaphthalene) was synthesized in the solid-state by ball milling a mixture of the corresponding monomer, a Cu-based catalyst, and an activated haloalkane as the polymerization initiator. Various reaction conditions, including milling time, milling frequency and added reductant to accelerate the polymerization were optimized. Monomer conversion and the evolution of polymer molecular weight were monitored over time using 1 H NMR spectroscopy and size exclusion chromatography, respectively, and linear correlations were observed. While the polymer molecular weight was effectively tuned by changing the initial monomer-to-initiator ratio, the experimentally measured values were found to be lower than their theoretical values. The difference was attributed to premature mechanical decomposition and modeled to accurately account for the decrement. Random copolymers of two monomers with orthogonal solubilities, sodium styrene sulfonate and 2-vinylnaphthalene, were also synthesized in the solid-state. Inspection of the data revealed that the solid-state polymerization reaction was controlled, followed a mechanism similar to that described for solution-state atom transfer radical polymerizations, and may be used to prepare polymers that are inaccessible via solution-state methods.

Star polymers with a cationic core prepared by ATRP for cellular nucleic acids delivery.

Poly(ethylene glycol) (PEG)-based star polymers with a cationic core were prepared by atom transfer radical polymerization (ATRP) for in vitro nucleic acid (NA) delivery. The star polymers were synthesized by ATRP of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and ethylene glycol dimethacrylate (EGDMA). Star polymers were characterized by gel permeation chromatography, zeta potential, and dynamic light scattering. These star polymers were combined with either plasmid DNA (pDNA) or short interfering RNA (siRNA) duplexes to form polyplexes for intracellular delivery. These polyplexes with either siRNA or pDNA were highly effective in NA delivery, particularly at relatively low star polymer weight or molar ratios, highlighting the importance of NA release in efficient delivery systems.

Synthesis and Characterization of Spirocyclic Mid-Block Containing Triblock Copolymer.

Polymers containing cyclic derivatives are a new class of macromolecular topologies with unique properties. Herein, we report the synthesis of a triblock copolymer containing a spirocyclic mid-block. To achieve this, a spirocyclic polystyrene (cPS) mid-block was first synthesized by atom transfer radical polymerization (ATRP) using a tetra-functional initiator, followed by end-group azidation and a copper (I)-catalyzed azide-alkyne cycloaddition reaction. The resulting functional cPS was purified using liquid chromatography techniques. Following the esterification of cPS, a macro-ATRP initiator was obtained and used to synthesize a poly (methyl methacrylate)-block-cPS-block-poly (methyl methacrylate) (PMMA-b-cPS-b-PMMA) triblock copolymer. This work provides a synthetic strategy for the preparation of a spirocyclic macroinitiator for the ATRP technique and as well as liquid chromatographic techniques for the purification of (spiro) cyclic polymers.

Preparation of cationic nanogels for nucleic acid delivery.

Cationic nanogels with site-selected functionality were designed for the delivery of nucleic acid payloads targeting numerous therapeutic applications. Functional cationic nanogels containing quaternized 2-(dimethylamino)ethyl methacrylate and a cross-linker with reducible disulfide moieties (qNG) were prepared by activators generated by electron transfer (AGET) atom transfer radical polymerization (ATRP) in an inverse miniemulsion. Polyplex formation between the qNG and nucleic acid exemplified by plasmid DNA (pDNA) and short interfering RNA (siRNA duplexes) were evaluated. The delivery of polyplexes was optimized for the delivery of pDNA and siRNA to the Drosophila Schneider 2 (S2) cell-line. The qNG/nucleic acid (i.e., siRNA and pDNA) polyplexes were found to be highly effective in their capabilities to deliver their respective payloads.

Synthesis of biocompatible PEG-Based star polymers with cationic and degradable core for siRNA delivery.

Star polymers with poly(ethylene glycol) (PEG) arms and a degradable cationic core were synthesized by the atom transfer radical copolymerization (ATRP) of poly(ethylene glycol) methyl ether methacrylate macromonomer (PEGMA), 2-(dimethylamino)ethyl methacrylate (DMAEMA), and a disulfide dimethacrylate (cross-linker, SS) via an "arm-first" approach. The star polymers had a diameter ~15 nm and were degraded under redox conditions by glutathione treatment into individual polymeric chains due to cleavage of the disulfide cross-linker, as confirmed by dynamic light scattering. The star polymers were cultured with mouse calvarial preosteoblast-like cells, embryonic day 1, subclone 4 (MC3T3-E1.4) to determine biocompatibility. Data suggest star polymers were biocompatible, with ≥ 80% cell viability after 48 h of incubation even at high concentration (800 µg/mL). Zeta potential values varied with N/P ratio confirming complexation with siRNA. Successful cellular uptake of the star polymers in MC3T3-E1.4 cells was observed by confocal microscopy and flow cytometry after 24 h of incubation.

Rapid cellular internalization of multifunctional star polymers prepared by atom transfer radical polymerization.

Poly(ethylene glycol) (PEG) star polymers containing GRGDS (Gly-Arg-Gly-Asp-Ser) peptide sequences on the star periphery were synthesized by atom transfer radical polymerization (ATRP) of poly(ethylene glycol) methyl ether methacrylate (PEGMA), GRGDS modified poly(ethylene glycol) acrylate (GRGDS-PEG-Acryl), fluorescein o-methacrylate (FMA), and ethylene glycol dimethacrylate (EGDMA) via an "arm-first" method. Star polymers were approximately 20 nm in diameter, as measured by dynamic light scattering and atomic force microscopy. Conjugation of FMA to the stars was confirmed by fluorescence microscopy, and successful attachment of GRGDS segments to the star periphery was confirmed by (1)H NMR spectroscopy. Both fluorescent PEG star polymers with and without peripheral GRGDS peptide segments were cultured with MC3T3-E1.4 cells. These star polymers were biocompatible with ≥ 90% cell viability after 24 h of incubation. Cellular uptake of PEG star polymers in MC3T3-E1.4 cells was observed by confocal microscopy. Rapid uptake of PEG star polymers with GRGDS peptides (∼ 100% of FITC-positive cells in 15 min measured by flow cytometry) was observed, suggesting enhanced delivery potential of these functional star polymers.

Cationic nanostructured polymers for siRNA delivery in murine calvarial pre-osteoblasts.

The endogenous RNA interference (RNAi) pathway enables control of pathologies caused by the dysregulation of proteins. Several biological molecules are active in RNAi including short interfering ribonucleic acid (siRNA). The effective utilization of siRNA as a therapeutic agent has been marked with distinct challenges, namely in intracellular delivery and achieving a sufficient dosage to affect protein expression. A delivery strategy we have developed to improve safety and efficacy of siRNA includes complexing siRNA with nanostructured polymers delivery systems (NSPs). These NSPs are synthesized via atom transfer radical polymerization (ATRP) and combine several important advances in polymer architecture for siRNA delivery. This includes shielding the cationic charge of the NSP with a poly(ethylene glycol) (PEG) shell to promote cell viability in MC3T3-E1.4 pre-osteoblasts, and minimize the inflammatory response in a C57BL/6 mouse model. In our gene knockdown experiments targeting glyceraldehyde 3-phosphate dehydrogenase Gapdh expression, star polymer and nanogel polyplexes suppressed Gapdh mRNA to levels comparable to cells treated with Lipofectamine RNAiMAX lipoplexes.