RESUMO
Although various electrocatalysts have been developed to ameliorate the shuttle effect and sluggish Li-S conversion kinetics, their electrochemical inertness limits the sufficient performance improvement of lithium-sulfur batteries (LSBs). In this work, an electrochemically active MoO3/TiN-based heterostructure (MOTN) is designed as an efficient sulfur host that can improve the overall electrochemical properties of LSBs via prominent lithiation behaviors. By accommodating Li ions into MoO3 nanoplates, the MOTN host can contribute its own capacity. Furthermore, the Li intercalation process dynamically affects the electronic interaction between MoO3 and TiN and thus significantly reinforces the built-in electric field, which further improves the comprehensive electrocatalytic abilities of the MOTN host. Because of these merits, the MOTN host-based sulfur cathode delivers an exceptional specific capacity of 2520 mA h g-1 at 0.1 C. Furthermore, the cathode exhibits superior rate capability (564 mA h g-1 at 5 C), excellent cycling stability (capacity fade rate of 0.034% per cycle for 1200 cycles at 2 C), and satisfactory areal capacity (6.6 mA h cm-2) under a high sulfur loading of 8.3 mg cm-2. This study provides a novel strategy to develop electrochemically active heterostructured electrocatalysts and rationally manipulate the built-in electric field for achieving high-performance LSBs.
RESUMO
Flexible neural probes are attractive emerging technologies for brain recording because they can effectively record signals with minimal risk of brain damage. Reducing the electrode impedance of the probe before recording is a common practice of many researchers. However, studies investigating the impact of low impedance levels on high-quality recordings using flexible neural probes are lacking. In this study, we electrodeposited Pt onto a commercial flexible polyimide neural probe and investigated the relationship between the impedance level and the recording quality. The probe was inserted into the brains of anesthetized mice. The electrical signals of neurons in the brain, specifically the ventral posteromedial nucleus of the thalamus, were recorded at impedance levels of 50, 250, 500 and 1000 kΩ at 1 kHz. The study results demonstrated that as the impedance decreased, the quality of the signal recordings did not consistently improve. This suggests that extreme lowering of the impedance may not always be advantageous in the context of flexible neural probes.
Assuntos
Lesões Encefálicas , Animais , Camundongos , Impedância Elétrica , Neurônios , Encéfalo , EletricidadeRESUMO
Layered group IV monochalcogenides are two-dimensional (2D) semiconducting materials with unique crystal structures and novel physical properties. Here, we report the growth of single crystalline GeS microribbons using the chemical vapor transport process. By using conductive atomic force microscopy, we demonstrated that the conductive behavior in the vertical direction was mainly affected by the Schottky barriers between GeS and both electrodes. Furthermore, we found that the topographic and current heterogeneities were significantly different with and without illumination. The topographic deformation and current enhancement were also predicted by our density functional theory (DFT)-based calculations. Their local spatial correlation between the topographic height and current was established. By virtue of 2D fast Fourier transform power spectra, we constructed the holistic spatial correlation between the topographic and current heterogeneity that indicated the diminished correlation with illumination. These findings on layered GeS microribbons provide insights into the conductive and topographic behaviors in 2D materials.
RESUMO
The diamond-graphite hybrid thin film with low-dimensional nanostructure (e.g., nitrogen-included ultrananocrystalline diamond (N-UNCD) or the alike), has been employed in many impactful breakthrough applications. However, the detailed picture behind the bottom-up evolution of such intriguing carbon nanostructure is far from clarified yet. Here, the authors clarify it, through the concerted efforts of microscopic, physical, and electrochemical analyses for a series of samples synthesized by hot-filament chemical vapor deposition using methane-hydrogen precursor gas, based on the hydrogen-dependent surface reconstruction of nanodiamond and on the substrate-temperature-dependent variation of the growth species (atomic hydrogen and methyl radical) concentration near substrate. The clarified picture provides insights for a drastic enhancement in the electrochemical activities of the hybrid thin film, concerning the detection of important biomolecule, that is, ascorbic acid, uric acid, and dopamine: their limits of detections are 490, 35, and 25 nm, respectively, which are among the best of the all-carbon thin film electrodes in the literature. This work also enables a simple and effective way of strongly enhancing AA detection.
Assuntos
Grafite , Nanoestruturas , Diamante/química , Dopamina/análise , Técnicas Eletroquímicas , Eletrodos , Grafite/química , Nanoestruturas/químicaRESUMO
Extracellular electrical stimulation (ES) can provide electrical potential from outside the cell membrane, but it is often ineffective due to interference from external factors such as culture medium resistance and membrane capacitance. To address this, we developed a vertical nanowire electrode array (VNEA) to directly provide intracellular electrical potential and current to cells through nanoelectrodes. Using this approach, the cell membrane resistivity and capacitance could be excluded, allowing effective ES. Human fetal neural stem cells (hfNSCs) were cultured on the VNEA for intracellular ES. Combining the structural properties of VNEA and VNEA-mediated ES, transient nanoscale perforation of the electrode was induced, promoting cell penetration and delivering current to the cell. Intracellular ES using VNEA improved the neuronal differentiation of hfNSCs more effectively than extracellular ES and facilitated electrophysiological functional maturation of hfNSCs because of the enhanced voltage-dependent ion-channel activity. The results demonstrate that VNEA with advanced nanoelectrodes serves as a highly effective culture and stimulation platform for stem-cell neurogenesis.
Assuntos
Nanofios , Células-Tronco Neurais , Diferenciação Celular , Estimulação Elétrica , Eletrodos , Humanos , NeurogêneseRESUMO
Gallium nitride nanowires (GaN NWs) with triangular cross-section exhibit universal conductance fluctuations (UCF) originating from the quantum interference of electron wave functions in the NWs. The amplitude of UCF is inversely proportional to the applied bias current. The bias dependence of UCF, combined with temperature dependence of the resistance suggests that phase coherent transport dominates over normal transport in GaN NWs. A unique temperature dependence of phase-coherent length and fluctuation amplitude is associated with inelastic electron-electron scattering in NWs. The phase-coherence length extracted from the UCF is as large as 400 nm at 1.8 K, and gradually decreases as temperature increases up to 60 K.
RESUMO
Direct reprogramming is an efficient strategy to produce cardiac lineage cells necessary for cardiac tissue engineering and drug testing for cardiac toxicity. However, functional maturation of reprogrammed cardiomyocytes, which is of great importance for their regenerative potential and drug response, still remains challenging. In this study, we propose a novel electrode platform to promote direct cardiac reprogramming and improve the functionality of reprogrammed cardiac cells. Nonviral cardiac reprogramming was improved via a three-dimensional spheroid culture of chemically induced cardiomyocytes exposed to a small-molecule cocktail. A micropillar electrode array providing biphasic electrical pulses mimicking the heartbeat further enhanced maturation and electrophysiological properties of reprogrammed cardiac spheroids, leading to proper responses and increased sensitivity to drugs. On the basis of our results, we conclude that our device may have a wider application in the generation of functional cardiac cells for regenerative medicine and screening of novel drugs.
Assuntos
Células-Tronco Pluripotentes Induzidas , Preparações Farmacêuticas , Eletrodos , Frequência Cardíaca , Miócitos CardíacosRESUMO
The real-time selective detection of disease-related markers in blood using biosensors has great potential for use in the early diagnosis of diseases and infections. However, this potential has not been realized thus far due to difficulties in interfacing the sensor with blood and achieving transparent circuits that are essential for detecting of target markers (e.g., protein, ions, etc.) in a complex blood environment. Herein, we demonstrate the real-time detection of a specific protein and ion in blood without a skin incision. Complementary metal-oxide-semiconductor technology was used to fabricate silicon micropillar array (SiMPA) electrodes with a height greater than 600 µm, and the surface of the SiMPA electrodes was functionalized with a self-assembling artificial peptide (SAP) as a receptor for target markers in blood, i.e., cholera toxin (CTX) and mercury(II) ions (Hg). The detection of CTX was investigated in both in vitro (phosphate-buffered saline and human blood serum, HBO model) and in vivo (mouse model) modes via impedance analysis. In the in vivo mode, the SiMPA pierces the skin, comes into contact with the blood system, and creates comprehensive circuits that include all the elements such as electrodes, blood, and receptors. The SiMPA achieves electrically transparent circuits and, thus, can selectively detect CTX in the blood in real time with a high sensitivity of 50 pM and 5 nM in the in vitro and in vivo modes, respectively. Mercury(II) ions can also be detected in both the in vitro and the in vivo modes by changing the SAP. The results illustrate that a robust sensor that can detect a variety of molecular species in the blood system in real time that will be helpful for the early diagnosis of disease and infections.
Assuntos
Biomarcadores/sangue , Técnicas Biossensoriais , Toxina da Cólera/isolamento & purificação , Mercúrio/isolamento & purificação , Animais , Proteínas Sanguíneas/química , Proteínas Sanguíneas/isolamento & purificação , Toxina da Cólera/sangue , Humanos , Limite de Detecção , Mercúrio/sangue , Camundongos , Semicondutores , Silício/químicaRESUMO
ZnO nanoparticles (NPs) of 4-5 nm, widely adopted as an electron transport layer (ETL) in quantum dot light emitting diodes (QD-LEDs), were synthesized using the solution-precipitation process. It is notable that synthesized ZnO NPs are highly degenerate intrinsic semiconductors and their donor concentration can be increased up to N D = 6.9 × 1021 cm-3 by annealing at 140 °C in air. An optical bandgap increase of as large as 0.16-0.33 eV by degeneracy is explained well by the Burstein-Moss shift. In order to investigate the influence of intrinsic defects of ZnO NP ETLs on the performance of QD-LED devices without a combined annealing temperature between ZnO NP ETLs and the emissive QD layer, pre-annealed ZnO NPs at 60 °C, 90 °C, 140 °C, and 180 °C were spin-coated on the annealed QD layer without further post-annealing. As the annealing temperature increases from 60 °C to 180 °C, the defect density related to oxygen vacancy (V O) in ZnO NPs is reduced from 34.4% to 17.8%, whereas the defect density of interstitial Zn (Zni) is increased. Increased Zni reduces the width (W) of the depletion region from 0.21 to 0.12 nm and lowers the Schottky barrier (ФB) between ZnO NPs and the Al electrode from 1.19 to 0.98 eV. We reveal for the first time that carrier conduction between ZnO NP ETLs and the Al electrode is largely affected by the concentration of Zni above the conduction band minimum, and effectively described by space charge limited current and trap charge limited current models.
RESUMO
Ultrafast electrically driven nanoscale light sources are critical components in nanophotonics. Compound semiconductor-based light sources for the nanophotonic platforms have been extensively investigated over the past decades. However, monolithic ultrafast light sources with a small footprint remain a challenge. Here, we demonstrate electrically driven ultrafast graphene light emitters that achieve light pulse generation with up to 10 GHz bandwidth across a broad spectral range from the visible to the near-infrared. The fast response results from ultrafast charge-carrier dynamics in graphene and weak electron-acoustic phonon-mediated coupling between the electronic and lattice degrees of freedom. We also find that encapsulating graphene with hexagonal boron nitride (hBN) layers strongly modifies the emission spectrum by changing the local optical density of states, thus providing up to 460% enhancement compared to the gray-body thermal radiation for a broad peak centered at 720 nm. Furthermore, the hBN encapsulation layers permit stable and bright visible thermal radiation with electronic temperatures up to 2000 K under ambient conditions as well as efficient ultrafast electronic cooling via near-field coupling to hybrid polaritonic modes under electrical excitation. These high-speed graphene light emitters provide a promising path for on-chip light sources for optical communications and other optoelectronic applications.
RESUMO
Monolayer MoS2, among many other transition metal dichalcogenides, holds great promise for future applications in nanoelectronics and optoelectronics due to its ultrathin nature, flexibility, sizable band gap, and unique spin-valley coupled physics. However, careful study of these properties at low temperature has been hindered by an inability to achieve low-temperature Ohmic contacts to monolayer MoS2, particularly at low carrier densities. In this work, we report a new contact scheme that utilizes cobalt (Co) with a monolayer of hexagonal boron nitride (h-BN) that has the following two functions: modifies the work function of Co and acts as a tunneling barrier. We measure a flat-band Schottky barrier of 16 meV, which makes thin tunnel barriers upon doping the channels, and thus achieve low-T contact resistance of 3 kΩ.µm at a carrier density of 5.3 × 1012/cm2. This further allows us to observe Shubnikov-de Haas oscillations in monolayer MoS2 at much lower carrier densities compared to previous work.
RESUMO
Silicon (Si) has a large theoretical capacity of 4200 mAhg-1 and has great potential as a high-performance anode material for Li ion batteries (LIBs). Meanwhile, nanostructures can exploit the potential of Si and, accordingly, many zero-dimensional (0D) and one-dimensional (1D) Si nanostructures have been studied. Herein, we report on two-dimensional (2D) Si nanostructures, Si nanosheets (SiNSs), as anodes for LIBs. These 2D Si nanostructures, with a thickness as low 5 nm and widths of several micrometers, show reversible crystalline-amorphous phase transformations with the lithi-/delithiation by the dimensionality of morphology and large surface area. The reversible crystalline-amorphous phase transformation provides a structural stability of Li+ insertions and makes SiNSs promising candidates for reliable high-performance LIBs anode materials.
RESUMO
Electrical stimulation through direct electrical activation has been widely used to recover the function of neurons, primarily through the extracellular application of thin film electrodes. However, studies using extracellular methods show limited ability to reveal correlations between the cells and the electrical stimulation due to interference from external sources such as membrane capacitance and culture medium. Here, we demonstrate long-term intracellular electrical stimulation of undamaged pheochromocytoma (PC-12) cells by utilizing a vertical nanowire electrode array (VNEA). The VNEA was prepared by synthesizing silicon nanowires on a Si substrate through a vapor-liquid-solid (VLS) mechanism and then fabricating them into electrodes with semiconductor nanodevice processing. PC-12 cells were cultured on the VNEA for 4 days with intracellular electrical stimulation and then a 2-day stabilization period. Periodic scanning via two-photon microscopy confirmed that the electrodes pierced the cells without inducing damage. Electrical stimulation through the VNEA enhances cellular differentiation and neurite outgrowth by about 50% relative to extracellular stimulation under the same conditions. VNEA-mediated stimulation also revealed that cellular differentiation and growth in the cultures were dependent on the potential used to stimulate them. Intracellular stimulation using nanowires could pave the way for controlled cellular differentiation and outgrowth studies in living cells.
RESUMO
Biomaterials developed for controlled drug delivery have demonstrated excellent results in the present study. A biomaterial prepared using hydroxyapatite (HAp) was shown to have a hollow structure with the presence of interconnected pores to house drug carriers. The poly(lactic-co-glycolic acid) particles were used as drug carriers loaded with dexamethasone, a corticosteroid that is known to promote osteoinduction. The surface of the drug carriers was modified using polyethyleneimine, and then conjugated to the surface of HAp granules. The hollow HAp granules had drug carriers on both their inner and outer surfaces and showed a controlled drug release rate that was comparable to that of granules containing drug carriers on their outer surface alone. The pores were designed for insertion of drug carriers and preosteoblasts. Consequently, the biomaterials influenced cellular behavior by first promoting cell proliferation and then inducing early stage osteogenic differentiation. The effects of controlled release rate were evidenced for up to two weeks after cell seeding, resulting in an increase of osteogenic differentiation. In summary, drug carriers loaded onto hollow HAp granules were shown to be suitable for patients who require replacement of missing bone for repair of bone fractures that are extremely complex, pose a significant health risk to the patient, or fail to heal properly.
Assuntos
Materiais Biocompatíveis/química , Dexametasona/química , Portadores de Fármacos/química , Durapatita/química , Ácido Láctico/química , Ácido Poliglicólico/química , Engenharia Tecidual/métodos , Animais , Materiais Biocompatíveis/farmacologia , Proliferação de Células/efeitos dos fármacos , Células Cultivadas , Preparações de Ação Retardada/química , Preparações de Ação Retardada/farmacologia , Dexametasona/farmacocinética , Dexametasona/farmacologia , Durapatita/farmacologia , Camundongos , Osteogênese/efeitos dos fármacos , Copolímero de Ácido Poliláctico e Ácido PoliglicólicoRESUMO
Understanding how living cells interact with nanostructures is integral to a better understanding of the fundamental principles of biology and the development of next-generation biomedical/bioenergy devices. Recent studies have demonstrated that mammalian cells can recognize nanoscale topographies and respond to these structures. From this perspective, there is a growing recognition that nanostructures, along with their specific physicochemical properties, can also be used to regulate the responses and motions of bacterial cells. Here, by utilizing a well-defined silicon nanowire array platform and single-cell imaging, we present direct evidence that Shewanella oneidensis MR-1 can recognize nanoscale structures and that their swimming patterns and initial attachment locations are strongly influenced by the presence of nanowires on a surface. Analyses of bacterial trajectories revealed that MR-1 cells exhibited a confined diffusion mode in the presence of nanowires and showed preferential attachment to the nanowires, whereas a superdiffusion mode was observed in the absence of nanowires. These results demonstrate that nanoscale topography can affect bacterial movement and attachment and play an important role during the early stages of biofilm formation.
Assuntos
Fenômenos Fisiológicos Bacterianos , Nanofios/química , Silício/química , Análise de Célula Única , Propriedades de SuperfícieRESUMO
Early detection and effective blood glucose control are critical for preventing and managing diabetes-related complications. Conventional glucometers provide point-in-time measurements but are painful and cannot facilitate continuous monitoring. Continuous glucose monitoring systems are comfortable but face challenges in terms of accuracy, cost, and sensor lifespan. This study aimed to develop a microneedle-based sensor patch for minimally invasive, painless, and continuous glucose monitoring in the interstitial fluid to address these limitations. Experimental results confirm painless and minimally invasive penetration of the skin tissue with cylindrical microneedles (3 × 3 array) to a depth of approximately 520 µm with minimal loading. The microneedle sensors fabricated with precision using the complementary metal-oxide semiconductor process were immobilized with glucose oxidase, as confirmed through phase angle analysis. Long-term tests confirmed the effective operation of the sensor for up to seven days. Glucose concentrations determined from the fitted concentration-impedance curves correlated well with those measured using commercial glucometers, indicating the reliability and precision of the microneedle sensor. The flexible and minimally invasive sensor developed in this study facilitates painless and continuous glucose monitoring.
Assuntos
Técnicas Biossensoriais , Automonitorização da Glicemia , Glicemia , Polímeros , Líquido Extracelular/química , Impedância Elétrica , Reprodutibilidade dos Testes , Agulhas , Glucose/análiseRESUMO
We report on a systematic study of the thermal transport characteristics of both as-grown zinc oxide and gallium nitride nanowires (NWs) via the four-point-probe 3-ω method in the temperature range 130-300 K. Both as-grown NWs were synthesized by a vapor-liquid-solid growth mechanism, and show clear n-type semiconducting behavior without any defects, which enables both the NWs to be promising candidates for thermoelectric materials. To measure the thermal conductivities of both NWs with lower heat loss and measurement errors, the suspended structures were formed by a combination of an e-beam lithography process and a random dispersion method. The measured thermal conductivities of both NWs are greatly reduced compared to their bulk materials due to the enhanced phonon scattering via the size effect and dopants (impurities). Furthermore, we observed that the Umklapp peaks of both NWs are shifted to a higher temperature than those of their bulk counterparts, indicating that phonon-boundary scattering dominates over other phonon scattering due to the size effect.
Assuntos
Nanofios/química , Semicondutores , Eletrodos , Desenho de Equipamento , Gálio/química , Nanotecnologia , Fônons , Temperatura , Óxido de Zinco/químicaRESUMO
We have fabricated transparent top-gate ZnO nanowire (NW) field effect transistors (FETs) on glass and measured their trap density-of-states (DOS) at the dielectric/ZnO NW interface with monochromatic photon beams during their operation. Our photon-probe method showed clear signatures of charge trap DOS at the interface, located near 2.3, 2.7, and 2.9 eV below the conduction band edge. The DOS information was utilized for the photo-detecting application of our transparent NW-FETs, which demonstrated fast and sensitive photo-detection of visible lights.
RESUMO
The effects of a heat treatment on the structural and electrical properties of GZO thin films grown by RF magnetron sputtering were investigated. The heat treatment involved temperatures in the range from 200 degrees C to 500 degrees C under air. As the temperature was increased, the electrical properties of GZO thin films increased exponentially and the surface morphology was drastically altered. The effect of temperature is discussed based on electrical and structural characterization of the materials.
RESUMO
It is known, but often unappreciated, that the performance of nanowire (NW)-based electrical devices can be significantly affected by electrical contacts between electrodes and NWs, sometimes to the extent that it is really the contacts that determine the performance. To correctly understand and design NW device operation, it is thus important to carefully measure the contact resistance and evaluate the contact parameters, specific contact resistance and transfer length. A four-terminal pattern or a transmission line model (TLM) pattern has been widely used to measure contact resistance of NW devices and the TLM has been typically used to extract contact parameters of NW devices. However, the conventional method assumes that the electrical properties of semiconducting NW regions covered by a metal are not changed after electrode formation. In this study, we report that the conventional methods for contact evaluation can give rise to considerable errors because of an altered property of the NW under the electrodes. We demonstrate that more correct contact resistance can be measured from the TLM pattern rather than the four-terminal pattern and correct contact parameters including the effects of changed NW properties under electrodes can be evaluated by using the contact end resistance measurement method.