RESUMO
Understanding the role of the oxidation state of the Cu surface and surface-adsorbed intermediate species in electrochemical CO2 reduction is crucial for the development of selective CO2-to-fuel electrocatalysts. In this study, the electrochemical CO2 reduction mechanism over the Cu catalysts with various oxidation states was studied by using in situ surface-enhanced infrared absorption spectroscopy (SEIRAS), in situ soft X-ray absorption spectroscopy (Cu L-edge), and online gas chromatography measurements. The atop-adsorbed CO (COatop) intermediate is obtained on the electrodeposited Cu surface which primarily has the oxidation state of Cu(I). COatop is further reduced, followed by the formation of C1 product such as CH4. The residual bridge-adsorbed CO (CObridge) is formed on the as-prepared Cu surface with Cu(0) which inhibits hydrocarbon formation. In contrast, the CV-treated Cu electrode prepared by oxidizing the as-prepared Cu surface contains different amounts of Cu(I) and Cu(0) states. The major theme of this work is that in situ SEIRAS results show the coexistence of COatop and CObridge as the reaction intermediates during CO2 reduction and that the selectivity of CO2-to-ethylene conversion is further enhanced in the CV-treated Cu electrode. The Cu catalysts modulated by the electrochemical method exhibit different oxidation states and reaction intermediates as well as electrocatalytic properties.
RESUMO
Immunotherapy can potentially suppress the highly aggressive glioblastoma (GBM) by promoting T lymphocyte infiltration. Nevertheless, the immune privilege phenomenon, coupled with the generally low immunogenicity of vaccines, frequently hampers the presence of lymphocytes within brain tumors, particularly in brain tumors. In this study, the membrane-disrupted polymer-wrapped CuS nanoflakes that can penetrate delivery to deep brain tumors via releasing the cell-cell interactions, facilitating the near-infrared II (NIR II) photothermal therapy, and detaining dendritic cells for a self-cascading immunotherapy are developed. By convection-enhanced delivery, membrane-disrupted amphiphilic polymer micelles (poly(methoxypoly(ethylene glycol)-benzoic imine-octadecane, mPEG-b-C18) with CuS nanoflakes enhances tumor permeability and resides in deep brain tumors. Under low-power NIR II irradiation (0.8 W/cm2), the intense heat generated by well-distributed CuS nanoflakes actuates the thermolytic efficacy, facilitating cell apoptosis and the subsequent antigen release. Then, the positively charged polymer after hydrolysis of the benzoic-imine bond serves as an antigen depot, detaining autologous tumor-associated antigens and presenting them to dendritic cells, ensuring sustained immune stimulation. This self-cascading penetrative immunotherapy amplifies the immune response to postoperative brain tumors but also enhances survival outcomes through effective brain immunotherapy.
Assuntos
Neoplasias Encefálicas , Membrana Celular , Células Dendríticas , Imunoterapia , Raios Infravermelhos , Células Dendríticas/imunologia , Células Dendríticas/efeitos dos fármacos , Neoplasias Encefálicas/terapia , Neoplasias Encefálicas/imunologia , Neoplasias Encefálicas/patologia , Animais , Camundongos , Humanos , Membrana Celular/química , Linhagem Celular Tumoral , Micelas , Nanopartículas/química , Terapia Fototérmica , Polietilenoglicóis/química , Glioblastoma/terapia , Glioblastoma/imunologia , Glioblastoma/patologia , Apoptose/efeitos dos fármacosRESUMO
Traumatic brain injury (TBI) triggers inflammatory response and glial scarring, thus substantially hindering brain tissue repair. This process is exacerbated by the accumulation of activated immunocytes at the injury site, which contributes to scar formation and impedes tissue repair. In this study, a mussel-inspired nitric oxide-release microreservoir (MINOR) that combines the features of reactive oxygen species (ROS) scavengers and sustained NO release to promote angiogenesis and neurogenesis is developed for TBI therapy. The injectable MINOR fabricated using a microfluidic device exhibits excellent monodispersity and gel-like self-healing properties, thus allowing the maintenance of its structural integrity and functionality upon injection. Furthermore, polydopamine in the MINOR enhances cell adhesion, significantly reduces ROS levels, and suppresses inflammation. Moreover, a nitric oxide (NO) donor embedded into the MINOR enables the sustained release of NO, thus facilitating angiogenesis and mitigating inflammatory responses. By harnessing these synergistic effects, the biocompatible MINOR demonstrates remarkable efficacy in enhancing recovery in mice. These findings benefit future therapeutic interventions for patients with TBI.
RESUMO
Endogenous signals, namely nitric oxide (NO) and electrons, play a crucial role in regulating cell fate as well as the vascular and neuronal systems. Unfortunately, utilizing NO and electrical stimulation in clinical settings can be challenging due to NO's short half-life and the invasive electrodes required for electrical stimulation. Additionally, there is a lack of tools to spatiotemporally control gas release and electrical stimulation. To address these issues, an "electromagnetic messenger" approach that employs on-demand high-frequency magnetic field (HFMF) to trigger NO release and electrical stimulation for restoring brain function in cases of traumatic brain injury is introduced. The system comprises a NO donor (poly(S-nitrosoglutathione), pGSNO)-conjugated on a gold yarn-dynamos (GY) and embedded in an implantable silk in a microneedle. When subjected to HFMF, conductive GY induces eddy currents that stimulate the release of NO from pGSNO. This process significantly enhances neural stem cell (NSC) synapses' differentiation and growth. The combined strategy of using NO and electrical stimulation to inhibit inflammation, angiogenesis, and neuronal interrogation in traumatic brain injury is demonstrated in vivo.
Assuntos
Lesões Encefálicas Traumáticas , Células-Tronco Neurais , Humanos , Óxido Nítrico , Ouro , Neurônios/fisiologia , Lesões Encefálicas Traumáticas/terapiaRESUMO
In this study, we demonstrate the visible-light-assisted photoelectrochemical (PEC) biosensing of uric acid (UA) by using graphene oxide nanoribbons (GONRs) as PEC electrode materials. Specifically, GONRs with controlled properties were synthesized by the microwave-assisted exfoliation of multi-walled carbon nanotubes. For the detection of UA, GONRs were adopted to modify either a screen-printed carbon electrode (SPCE) or a glassy carbon electrode (GCE). Cyclic voltammetry analyses indicated that all Faradaic currents of UA oxidation on GONRs with different unzipping/exfoliating levels on SPCE increased by more than 20.0% under AM 1.5 irradiation. Among these, the GONRs synthesized under a microwave power of 200 W, namely GONR(200 W), exhibited the highest increase in Faradaic current. Notably, the GONR(200 W)/GCE electrodes revealed a remarkable elevation (~40.0%) of the Faradaic current when irradiated by light-emitting diode (LED) light sources under an intensity of illumination of 80 mW/cm2. Therefore, it is believed that our GONRs hold great potential for developing a novel platform for PEC biosensing.
RESUMO
Gas sensors, which play an important role in the safety of human life, cover a wide range of applications including intelligent systems and detection of harmful and toxic gases. It is known that graphene is an ideal and attractive candidate for gas sensing due to its high surface area and excellent mechanical, electrical, optical, and thermal properties. However, in order to fully realize its potential as a commercial gas sensor, demand for a graphene-based device of low-limit detection, high sensitivity, and fast response time needs to be met. Here, we demonstrate a metal/insulator/semiconductor (MIS) based gas sensor consisting of as-grown epitaxial graphene nanowalls (EGNWs)/silicon carbide (SiC)/silicon (Si) structure. The unique edge dominant three-dimensional (3D) EGNWs based MIS device achieved an extraordinarily low limit of detection (0.5 ppm) and unprecedented sensitivity (82 µA/ppm/cm2 for H2) with a fast response of shorter than 500 ms. These unique properties of our MIS device are attributed to the abundance of vertically oriented nanographitic edges and structural defects that act as extra-favorable adsorption sites and exhibit fast electron-transfer kinetics through the edges. Our experimental findings can pave the way for the realization of high-performance 3D graphene-based gas sensor devices.
Assuntos
Compostos Inorgânicos de Carbono/química , Técnicas de Química Analítica/instrumentação , Gases/análise , Grafite/química , Limite de Detecção , Nanoestruturas/química , Compostos de Silício/química , Silício/química , Pressão Atmosférica , Hidrogênio/análise , Oxigênio/análise , TemperaturaRESUMO
Production of hydrogen from water electrolysis has stimulated the search of sustainable electrocatalysts as possible alternatives. Recently, cobalt phosphide (CoP) and molybdenum phosphide (MoP) received great attention owing to their superior catalytic activity and stability towards the hydrogen evolution reaction (HER) which rivals platinum catalysts. In this study, we synthesize and study a series of catalysts based on hybrids of CoP and MoP with different Co/Mo ratio. The HER activity shows a volcano shape and reaches a maximum for Co/Mo = 1. Tafel analysis indicates a change in the dominating step of Volmer-Hyrovský mechanism. Interestingly, X-ray diffraction patterns confirmed a major ternary interstitial hexagonal CoMoP2 crystal phase is formed which enhances the electrochemical activity.
RESUMO
The thickness-dependent surface states of MoS2 thin films grown by the chemical vapor deposition process on the SiO2-Si substrates are investigated by X-ray photoelectron spectroscopy. Raman and high-resolution transmission electron microscopy suggest the thicknesses of MoS2 films to be ranging from 3 to 10 layers. Both the core levels and valence band edges of MoS2 shift downward â¼0.2 eV as the film thickness increases, which can be ascribed to the Fermi level variations resulting from the surface states and bulk defects. Grainy features observed from the atomic force microscopy topographies, and sulfur-vacancy-induced defect states illustrated at the valence band spectra imply the generation of surface states that causes the downward band bending at the n-type MoS2 surface. Bulk defects in thick MoS2 may also influence the Fermi level oppositely compared to the surface states. When Au contacts with our MoS2 thin films, the Fermi level downshifts and the binding energy reduces due to the hole-doping characteristics of Au and easy charge transfer from the surface defect sites of MoS2. The shift of the onset potentials in hydrogen evolution reaction and the evolution of charge-transfer resistances extracted from the impedance measurement also indicate the Fermi level varies with MoS2 film thickness. The tunable Fermi level and the high chemical stability make our MoS2 a potential catalyst. The observed thickness-dependent properties can also be applied to other transition-metal dichalcogenides (TMDs), and facilitates the development in the low-dimensional electronic devices and catalysts.
RESUMO
A promising energy storage material, MnO2 /hierarchically porous carbon (HPC) nanocomposites, with exceptional electrochemical performance and ultrahigh energy density was developed for asymmetric supercapacitor applications. The microstructures of MnO2 /HPC nanocomposites were characterized by transmission electron microscopy, scanning transmission electron microscopy, and electron dispersive X-ray elemental mapping analysis. The 3-5â nm MnO2 nanocrystals at mass loadings of 7.3-10.8â wt % are homogeneously distributed onto the HPCs, and the utilization efficiency of MnO2 on specific capacitance can be enhanced to 94-96 %. By combining the ultrahigh utilization efficiency of MnO2 and the conductive and ion-transport advantages of HPCs, MnO2 /HPC electrodes can achieve higher specific capacitance values (196â F g(-1) ) than those of pure carbon electrodes (60.8â F g(-1) ), and maintain their superior rate capability in neutral electrolyte solutions. The asymmetric supercapacitor consisting of a MnO2 /HPC cathode and a HPC anode shows an excellent performance with energy and power densities of 15.3â Wh kg(-1) and 19.8â kW kg(-1) , respectively, at a cell voltage of 2â V. Results obtained herein demonstrate the excellence of MnO2 /HPC nanocomposites as energy storage material and open an avenue to fabricate the next generation supercapacitors with both high power and energy densities.
Assuntos
Carbono/química , Capacitância Elétrica , Compostos de Manganês/química , Óxidos/química , Eletroquímica , Eletrodos , Modelos Moleculares , Conformação Molecular , Nanoestruturas/química , PorosidadeRESUMO
Three-dimensional, hierarchically ordered, porous carbon (HOPC) with designed porous textures, serving as an ion-buffering reservoir, an ion-transport channel, and a charge-storage material, is expected to be advanced an energy material for high-rate supercapacitors. Herein, HOPC without/with partially graphitic nanostructures have been directly synthesized by means of a simple one-pot synthesis procedure. The designed porous textures of the 3D HOPC materials are composed of highly ordered, fcc macroporous (300 nm), interconnected porous structures, including macroporous windows (170 nm), hexagonally ordered mesopores (5.0 nm), and useful micropores (1.2 nm). 3D HOPC-g-1000 (g=graphitic, 1000=pyrolysis temperature of 1000 °C) with partially graphitic nanostructures has a low specific surface area (296 m(2) g(-1)) and a low gravimetric specific capacitance (73.4 F g(-1) at 3 mV s(-1)), but improved electrical conductivity, better rate performance, higher electrolyte accessibility (24.8 µF cm(-2) at 3 mV s(-1)), faster frequency response (≈1 Hz), and excellent cycling performance (>5400 cycles). The specific capacitance per surface area is higher than that of conventional porous carbons, carbon nanotubes, and modified graphene (10-19 µF cm(-2)).