Physical properties and solubility studies of Nifedipine-PEG 1450/HPMCAS-HF solid dispersions.

Low-order high-energy nifedipine (NIF) solid dispersions (SDs) were generated by melt solvent amorphization with polyethylene glycol (PEG) 1450 and hypromellose acetate succinate (HPMCAS-HF) to increase NIF solubility while achieving acceptable physical stability. HPMCAS-HF was used as a crystallization inhibitor. Individual formulation components, their physical mixtures (PMs), and SDs were characterized by differential scanning calorimetry, powder X-ray diffraction, and Fourier transform infrared spectroscopy (FTIR). NIF solubility and percent crystallinity (PC) were determined at the initial time and after 5 days stored at 25 °C and 60% RH. FTIR indicated that hydrogen bonding was involved with the amorphization process. FTIR showed that NIF:HPMCAS-HF intermolecular interactions were weaker than NIF:PEG 1450 interactions. NIF:PEG 1450 SD solubilities were significantly higher than their PM counterparts (p < 0.0001). The solubilities of NIF:PEG 1450:HPMCAS-HF SDs were significantly higher than their corresponding NIF:PEG 1450 SDs (p < 0.0001-0.043). All the SD solubilities showed a statistically significant decrease (p < 0.0001) after storage for 5 days. SDs PC were statistically lower than their comparable PMs (p < 0.0001). The PCs of SDs with HPMCAS-HF were significantly lower than SDs not containing only PEG 1450. All SDs exhibited a significant increase in PC (p < 0.0001-0.0089) on storage. Thermogravimetric analysis results showed that HPMCAS-HF bound water at higher temperatures than PEG 1450 (p < 0.0001-0.0039). HPMCAS-HF slowed the crystallization process of SDs, although it did not completely inhibit NIF crystal growth.

Computational Predictability of Microsponge Properties Using Different Multivariate Models.

The capabilities of principal component regression (PCR) and multiple linear regression (MLR) were evaluated to decipher and predict the impact of formulation and process parameters on the modeled metronidazole benzoate (MB)-ethyl cellulose (EC) microsponge (MBECM) properties. MBECM were prepared by a quasi-emulsion solvent diffusion method. A minimum experimentation was designed using Box-Behnken approach with one center point after initial screening experiments. Data was modeled by principal component analysis (PCA), PCR, and MLR. Two distinct groupings of developed MBECM was observed in initial qualitative PCA as a function of their respective formulation and processing parameters. Group A formulations with low dichloromethane, high PVA, and low stirring speed exhibited larger particle size, lower entrapment efficiency (EE), and lower actual drug content (ADC) than Group B formulations. Optimized quantitative PCR and MLR models demonstrated a linear dependence of particle size and quadratic dependence of EE and ADC on the studied formulation and process parameters. Interestingly, MLR models showed relatively better predictability of the selected MBECM formulation properties when compared with PCR. MBECM were amorphous in nature and spherical shaped. Carbopol® 940 NF based hydrogel of selected MBECM formulation exhibited a prolonged MB release than the commercial MB gel (Metrogyl®), showing no signs of necrosis in the goat mucosa. Thus, a properly designed minimum experimentation coupled with multivariate modeling generated a knowledge-rich target space, which enabled to understand and predict the performance of developed MBECM within a prescribed design space.

Correction to: Bioreducible Poly(Amino Ethers) Based mTOR siRNA Delivery for Lung Cancer.

Under the heading "Methods-Synthesis of the Bioreducible Modified-PAE (mPAE)", on page 3, line 14-17, there is an error. The quantity unit of PAE and 2-iminothiolane hydrochloride needs to be corrected to mg instead of g.

Bioreducible Poly(Amino Ethers) Based mTOR siRNA Delivery for Lung Cancer.

PURPOSE: Lung cancer is one of the leading causes of deaths in the United States, but currently available therapies for lung cancer are associated with reduced efficacy and adverse side effects. Small interfering RNA (siRNA) can knock down the expression of specific genes and result in therapeutic efficacy in lung cancer. Recently, mTOR siRNA has been shown to induce apoptosis in NSCLC cell lines but its use is limited due to poor stability in biological conditions. METHODS: In this study, we modified an aminoglyocisde-derived cationic poly (amino-ether) by introducing a thiol group using Traut's reagent to generate a bio-reducible modified-poly (amino-ether) (mPAE). The mPAE polymer was used to encapsulate mTOR siRNA by nanoprecipitation method, resulting in the formation of stable and bio-reducible nanoparticles (NPs) which possessed an average diameter of 114 nm and a surface charge of approximately +27 mV. RESULTS: The mTOR siRNA showed increased release from the mTS-mPAE NPs in the presence of 10 mM glutathione (GSH). The polymeric mTS-mPAE-NPs were also capable of efficient gene knockdown (60 and 64%) in A549 and H460 lung cancer cells, respectively without significant cytotoxicity at 30 µg/ml concentrations. The NPs also showed time-dependent cellular uptake for up to 24 h as determined using flow cytometry. Delivery of the siRNA using these NPs also resulted in significant inhibition of A549 and H460 cell proliferation in vitro, respectively. CONCLUSIONS: The results demonstrate that the mPAE polymer based NPs show strong potential for siRNA delivery to lung cancer cells. It is anticipated that future modification can help improve the efficacy of nucleic acid delivery, leading to higher inhibition of lung cancer growth in vitro and in vivo.

Factorial Design Based Multivariate Modeling and Optimization of Tunable Bioresponsive Arginine Grafted Poly(cystaminebis(acrylamide)-diaminohexane) Polymeric Matrix Based Nanocarriers.

Desired characteristics of nanocarriers are crucial to explore its therapeutic potential. This investigation aimed to develop tunable bioresponsive newly synthesized unique arginine grafted poly(cystaminebis(acrylamide)-diaminohexane) [ABP] polymeric matrix based nanocarriers by using L9 Taguchi factorial design, desirability function, and multivariate method. The selected formulation and process parameters were ABP concentration, acetone concentration, the volume ratio of acetone to ABP solution, and drug concentration. The measured nanocarrier characteristics were particle size, polydispersity index, zeta potential, and percentage drug loading. Experimental validation of nanocarrier characteristics computed from initially developed predictive model showed nonsignificant differences (p > 0.05). The multivariate modeling based optimized cationic nanocarrier formulation of <100 nm loaded with hydrophilic acetaminophen was readapted for a hydrophobic etoposide loading without significant changes (p > 0.05) except for improved loading percentage. This is the first study focusing on ABP polymeric matrix based nanocarrier development. Nanocarrier particle size was stable in PBS 7.4 for 48 h. The increase of zeta potential at lower pH 6.4, compared to the physiological pH, showed possible endosomal escape capability. The glutathione triggered release at the physiological conditions indicated the competence of cytosolic targeting delivery of the loaded drug from bioresponsive nanocarriers. In conclusion, this unique systematic approach provides rational evaluation and prediction of a tunable bioresponsive ABP based matrix nanocarrier, which was built on selected limited number of smart experimentation.

Designing hybrid onconase nanocarriers for mesothelioma therapy: a Taguchi orthogonal array and multivariate component driven analysis.

Onconase (ONC) is a member of a ribonuclease superfamily that has cytostatic activity against malignant mesothelioma (MM). The objective of this investigation was to develop bovine serum albumin (BSA)-chitosan based hybrid nanoformulations for the efficient delivery of ONC to MM while minimizing the exposure to normal tissues. Taguchi orthogonal array L9 type design was used to formulate ONC loaded BSA nanocarriers (ONC-ANC) with a mean particle size of 15.78 ± 0.24 nm (ζ = -21.89 ± 0.11 mV). The ONC-ANC surface was hybridized using varying chitosan concentrations ranging between 0.100 and 0.175% w/v to form various ONC loaded hybrid nanocarriers (ONC-HNC). The obtained data set was analyzed by principal component analysis (PCA) and principal component regressions (PCR) to decode the effects of investigated design variables. PCA showed positive correlations between investigated design variables like BSA, ethanol dilution, and total ethanol with particle size and entrapment efficiency (EE) of formulated nanocarriers. PCR showed that the particle size depends on BSA, ethanol dilution, and total ethanol content, while EE was only influenced by BSA content. Further analysis of chitosan and TPP effects used for coating of ONC-ANC by PCR confirmed their positive impacts on the particle size, zeta potential, and prolongation of ONC release compared to uncoated ONC-ANC. PCR analysis of preliminary stability studies showed increase in the particle size and zeta potential at lower pH. However, particle size, zeta potential, and EE of developed HNC were below 63 nm, 31 mV, and 96%, respectively, indicating their stability under subjected buffer conditions. Out of the developed formulations, HNC showed enhanced inhibition of cell viability with lower IC50 against human MM-REN cells compared to ONC and ONC-ANC. This might be attributed to the better cell uptake of HNC, which was confirmed in the cell uptake fluorescence studies. These studies indicated that a developed nanotherapeutic approach might aid in reducing the therapeutic dose of ONC, minimizing adverse effects by limiting the exposure of ONC to normal tissues, and help in the development of new therapeutic forms and routes of administration.

Theranostic tumor homing nanocarriers for the treatment of lung cancer.

The drugs/strategies to selectively inhibit tumor blood supply have generated interest in recent years for enhancement of cancer therapeutics. The objective of this study was to formulate tumor homing PEGylated CREKA peptide conjugated theranostic nanoparticles of DIM-C-pPhC6H5 (DIM-P) and investigate in vivo antitumor activity as well as evaluate the targeted efficiency to lung tumors using imaging techniques. DIM-P loaded Nanoparticles (NCs-D) were prepared using lipids, and DOGS-NTA-Ni and the surface of NCs-D were modified with PEGylated CREKA peptide (PCNCs-D). PCNCs-D showed 3 fold higher binding to clotted plasma proteins in tumor vasculature compared to NCs-D. PCNCs-D showed 26%±4% and 22%±5% increase in tumor reduction compared to NCs-D in metastatic and orthotopic models respectively. In-vivo imaging studies showed ~40 folds higher migration of PCNCs-Di in tumor vasculature than NCs-Di. Our studies demonstrate the role of PCNCs-D as theranostic tumor homing drug delivery and imaging systems for lung cancer diagnosis and treatment. FROM THE CLINICAL EDITOR: This study demonstrates a very efficient delivery system to address lung cancer growth through blood supply inhibition.

Efficacy of aerosolized celecoxib encapsulated nanostructured lipid carrier in non-small cell lung cancer in combination with docetaxel.

PURPOSE: Evaluation of in-vivo anticancer activity of aerosolized Celecoxib encapsulated Nanolipidcarriers (Cxb-NLC) as a single therapeutic agent and combined with intravenously administered Docetaxel (Doc) against non-small cell lung cancer. METHODS: Cxb-NLC were prepared by high-pressure homogenization and were characterized for its physicochemical characteristics. Metastatic A549 tumor model in Nu/Nu mice was used to evaluate response of aerosolized Cxb-NLC & Doc. Isolated lung tumor samples were analyzed for: a) DNA fragmentation and cleaved caspase-3 by immunohistochemistry, b) apoptotic and angiogenic protein markers by western blot, c) global proteomic alterations by an isobaric labeling quantitative proteomic method and d) toxicity studies of NLC. RESULTS: The particle size of Cxb-NLC was 217 ± 20 nm, while entrapment efficiency was more than 90%. Cxb-NLC and Doc alone and in combination showed 25 ± 4%, 37 ± 5%, and 67 ± 4% reduction in tumor size respectively compared to control. Proteomic analysis with combination treatment further revealed significantly decreased expression of multiple pro-survival and pro-metastasis proteins as well as tumor invasion markers and the expression of S100 family proteins, such as S100A6 and S100P were decreased by 2.5 and 1.6 fold. CONCLUSIONS: Combination therapy with Cxb-NLC and Doc showed significant reduction in tumor growth which was further confirmed by proteomic analysis.

Freeze-dried targeted mannosylated selenium-loaded nanoliposomes: development and evaluation.

The aim of this investigation was to develop and evaluate freeze-dried mannosylated liposomes for the targeted delivery of selenium. Dipalmitoylphosphatidylcholine, distearoylphosphatidylglycerol, and cholesterol were dissolved in a chloroform and methanol mixture and allowed to form a thin film within a rotatory evaporator. This thin film was hydrated with a sodium selenite (5.8 µM) solution to form multilamellar vesicles and homogenized under high pressure to yield unilamellar nanoliposomes. Se-loaded nanoliposomes were mannosylated by 0.1% w/v mannosamine (Man-Lip-Se) prior to being lyophilized. Mannosamine concentration was optimized with cellular uptake studies in M receptor expressing cells. Non-lyophilized and lyophilized Man-Lip-Se were characterized for size, zeta potential, and entrapment efficiency. The influence of liposomal composition on the characteristics of Man-Lip-Se were evaluated using acidic and basic medium for 24 h. Thermal analysis and powder X-ray diffraction were used to determine the interaction of components within the Man-Lip-Se. The size, zeta potential and entrapment efficiency of the optimum Man-Lip-Se were observed to be 158 ± 28.9 nm, 33.21 ± 0.89 mV, and 77.27 ± 2.34%, respectively. An in vitro Se release of 70-75% up to 24 h in PBS pH 6.8 and <8% Se release in acidic media (0.1 N HCl) in 1 h was observed. The Man-Lip-Se were found to withstand gastric-like environments and showed sustained release. Stable freeze-dried Man-Lip-Se were successfully formulated with a size of <200 nm, ≈ 75% entrapment, and achieved controlled release of Se with stability under acidic media, which may be of importance in the targeted delivery of Se to the immune system.

Enhancement of docetaxel anticancer activity by a novel diindolylmethane compound in human non-small cell lung cancer.

PURPOSE: This study was conducted to examine the cytotoxic effects of a peroxisome proliferator-activated receptor gamma (PPARgamma) agonist, 1,1-bis (3'-indolyl)-1-(p-biphenyl) methane (DIM-C-pPhC(6)H(5)), alone and in combination with docetaxel in vitro in A549 lung cancer cells and in vivo in nude mice bearing A549 orthotopic lung tumors. EXPERIMENTAL DESIGN: Isobolographic method was used to calculate combination index values from cell viability data. Apoptosis was evaluated in A549 cells by terminal deoxynucleotidyl transferase-mediated nick end labeling assay and measurement of cleaved poly(ADP-ribose) polymerase level. Expression of proteins was studied by Western blotting. A549 cells were implanted to induce orthotopic lung tumors in nude mice and the efficacy of docetaxel, DIM-C-pPhC(6)H(5), or combination was determined. Apoptosis and cleaved caspase-3 expression in the harvested tissues were studied by terminal deoxynucleotidyl transferase-mediated nick end labeling and immunohistochemistry, respectively. RESULTS: The combination index values (0.36-0.9) suggested synergistic to additive effects of docetaxel + DIM-C-pPhC(6)H(5) and resulted in the highest increase in percentage of apoptotic cells and expression of cleaved poly(ADP-ribose) polymerase, Bax, and N-cadherin compared with treatment with either agent. The combination also enhanced procaspase-3 and -9 cleavage. In vivo, docetaxel + DIM-C-pPhC(6)H(5) reduced lung weights by 57% compared with 39% by docetaxel or 22% by DIM-C-pPhC(6)H(5) alone, induced apoptosis in 43% of the tumor cells compared with 29% and 22% in tumors treated with docetaxel and DIM-C-pPhC(6)H(5), respectively, and increased procaspase-3 cleavage compared with either agent alone. CONCLUSIONS: These findings suggest potential benefit for use of docetaxel and DIM-C-pPhC(6)H(5) combination in lung cancer treatment.

Formulation Strategies of Nano Lipid Carrier for Effective Brain Targeting of Anti-AD Drugs.

NLC is a next-generation lipid nanocarrier, which holds many advantages over other colloidal lipid carrier systems like higher drug loading, better and controlled release and enhanced stability. Owing to the unique structural composition, i.e. crystallized solid and liquid lipid blend, it offers excellent biocompatibility and higher permeation across physiological membranes like BBB. Moreover, the surface of NLC can easily be modified with target-specific ligands, proteins, peptides, etc. which makes it a potential candidate for brain targeting of CNS acting drugs. NLC has found various applications for the treatment of various CNS disorders including Alzheimer's disease, Parkinson's disease, schizophrenia, epilepsy, migraine, cerebral ischemia, etc. Among these, the application of NLC towards the treatment of AD has been well-explored in the past two decades. In this piece of work, we have discussed the types of NLC, its composition, fabrication techniques, characterization, stability profile and application in the treatment of AD.

Aerosol performance of large respirable particles of amikacin sulfate produced by spray and freeze drying techniques.

The purpose of the present study was to investigate the influence of method of preparation of large respirable particles of amikacin sulphate on traits and topography and in-vitro aerosol performance. Large respirable particles of amikacin sulfate (50%w/w) were produced by spray-drying and freeze-drying processes using hydrogenated soyaphosphatidylcholine, L-leucine and Poloxamer 188. Particles exhibited 0.04-0.08 g/cm3 tap densities, 7-20 microm geometric particle size, and 1 to 5 microm of mean aerodynamic diameter. Apart from the morphology and topographical features, spray-dried and freeze-dried particles had marginal difference in their solid-state characteristics. Spray-dried particles were dimpled spherical shape with roundness value close to 1(1.066 +/- 0.028), relatively smooth surface texture and produced greater aerosol dispersion with 20% higher fine particle fraction, 6.92% lower impaction loss and 13% less capsule and device retention than freeze dried particles. Traits and topographical features, such as particle size, polydispersity, elongation ratio, roundness, shape, and degree of surface roughness were found to be influenced significantly by spray-drying process and particles produced by spray-drying process showed better aerosol performance due to these differences.

The Daniel K. Inouye College of Pharmacy Scripts: Targeted Nanocarrier Based Systems for the Treatment of Lung Cancer.

In Hawai'i, lung cancer is among the top cancers diagnosed and a leading cause of death. Despite current understanding and modern surgery, radiology, and chemotherapy techniques, the survival of those suffering from lung cancer remains low. Current anticancer drugs have poor tumor tissue selectivity and toxicity issues that contribute to their overall low efficacy, detrimental effects to normal tissues, and drug resistance. A potential way of mitigating cancer is through RNA interference (RNAi) by the delivery of small interfering RNA (siRNA) to target select proteins or genes involved in cancer progression, known as oncoproteins or oncogenes, respectively. However, the clinical utility of delivering unformulated siRNA has been hindered due to poor cell penetration, nonspecific effects, rapid degradation, and short half-life. As an alternate for conventional chemotherapy, nanoparticles (AKA nanocarriers) may be designed to localize within the tumor environment and increase targeted cell internalization, thus reducing systemic adverse effects and increasing efficacy. Nanoparticles play important roles in drug delivery and have been widely studied for cancer therapy and diagnostics, termed collectively as theranostics. Nanoparticles composed of natural and artificial polymers, proteins, lipids, metals, and carbon-based materials have been developed for the delivery of siRNA. Cancer targeting has been improved by nanoparticle surface modification or conjugation with biomolecules that are attracted to or stimulate therapeutic agent release within cancer tissues or cells. In this mini-review article, we present recent progress in nanocarrier-mediated siRNA delivery systems that include lipid, polymer, metallic and carbon-based nanoparticles for lung cancer therapy.

Aerosol Delivery of siRNA to the Lungs. Part 2: Nanocarrier-based Delivery Systems.

In this article, applications of engineered nanoparticles containing siRNA for inhalation delivery are reviewed and discussed. Diseases with identified protein malfunctions may be mitigated through the use of well-designed siRNA therapeutics. The inhalation route of administration provides local delivery of siRNA therapeutics to the lungs for various pulmonary diseases. A siRNA delivery system can be used to overcome the barriers of pulmonary delivery, such as anatomical barriers, mucociliary clearance, cough clearance, and alveolar macrophage clearance. Apart from naked siRNA aerosol delivery, previously studied siRNA carrier systems include those of lipidic, polymeric, peptide, or inorganic origin. These delivery systems can achieve pulmonary delivery through the generation of an aerosol via an inhaler or nebulizer. The preparation methodologies for these siRNA nanocarrier systems will be discussed herein. The use of inhalable nanocarrier siRNA delivery systems have barriers to their effective delivery, but overcoming these constraints while formulating a safe and effective delivery system will offer unique advances to the field of inhaled medicine.

Emerging technologies for the non-invasive characterization of physical-mechanical properties of tablets.

The density, porosity, breaking force, viscoelastic properties, and the presence or absence of any structural defects or irregularities are important physical-mechanical quality attributes of popular solid dosage forms like tablets. The irregularities associated with these attributes may influence the drug product functionality. Thus, an accurate and efficient characterization of these properties is critical for successful development and manufacturing of a robust tablets. These properties are mainly analyzed and monitored with traditional pharmacopeial and non-pharmacopeial methods. Such methods are associated with several challenges such as lack of spatial resolution, efficiency, or sample-sparing attributes. Recent advances in technology, design, instrumentation, and software have led to the emergence of newer techniques for non-invasive characterization of physical-mechanical properties of tablets. These techniques include near infrared spectroscopy, Raman spectroscopy, X-ray microtomography, nuclear magnetic resonance (NMR) imaging, terahertz pulsed imaging, laser-induced breakdown spectroscopy, and various acoustic- and thermal-based techniques. Such state-of-the-art techniques are currently applied at various stages of development and manufacturing of tablets at industrial scale. Each technique has specific advantages or challenges with respect to operational efficiency and cost, compared to traditional analytical methods. Currently, most of these techniques are used as secondary analytical tools to support the traditional methods in characterizing or monitoring tablet quality attributes. Therefore, further development in the instrumentation and software, and studies on the applications are necessary for their adoption in routine analysis and monitoring of tablet physical-mechanical properties.

Development of Optimized, Inhalable, Gemcitabine-Loaded Gelatin Nanocarriers for Lung Cancer.

BACKGROUND: Aerosol delivery of chemotherapeutic nanocarriers represents a promising alternative for lung cancer therapy. This study optimized gemcitabine (Gem)-loaded gelatin nanocarriers (GNCs) cross-linked with genipin (Gem-GNCs) to evaluate their potential for nebulized lung cancer treatment. METHODS: Gem-GNCs were prepared by two-step desolvation and optimized through Taguchi design and characterized for physicochemical properties. Particle size and morphology were confirmed by scanning and transmission electron microscopy. In vitro release of Gem from Gem-GNCs performed in Dulbecco's phosphate-buffered saline and simulated lung fluid was evaluated to determine release mechanisms. Particle size stability was assessed under varying pH. Differential scanning calorimetry and powder X-ray diffraction were used to determine the presence and stability of Gem-GNC components and amorphization of Gem, respectively. Gem-GNC efficacy within A549 and H460 cells was evaluated using MTT assays. Mucus rheology upon treatment with Gem-GNCs, lactose, and normal saline control was measured. Andersen cascade impaction identified the aerodynamic particle size distribution of the nebulized formulation. RESULTS: Gem-GNCs had particle size, zeta potential, entrapment efficiency, and loading efficiency of 178 ± 7.1 nm, -18.9 mV, 92.5%, and 9.1%, respectively. The Gem and formulation excipients where molecularly dispersed and configured amorphously. Gem-GNCs were stable at pH 5.4-7.4 for 72 hours. Gem release from Gem-GNCs was governed by non-Fickian controlled release due to diffusion/erosion from a matrix-based nanocarrier. Gem-GNCs elicited a 40% reduction of the complex viscosity η*(1 Hz) of human bronchial epithelial cell mucus containing 3 wt% solids to mimic mild airway disease. The nebulized Gem-GNCs had a mass median aerodynamic diameter (MMAD) of 2.0 ± 0.16 µm, geometric standard deviation (GSD) of 2.7 ± 0.16, and fine particle fraction (FPF) of 75.2% ± 2.4%. The Gem-GNC formulation did not outperform the Gem solution in A549 cells. However, in H460, Gem-GNCs outperformed the Gem IC50 reduction by ∼5-fold at 48 and 10-fold 72 hours. CONCLUSION: Stable, effective, and sustained-release Gem-GNCs were developed. The nebulized Gem-GNCs had satisfactory MMAD, GSD, and FPF and the formulation reduced the dynamic complex viscosity of mucus consistent with increased mobility of nanoparticles.

Enhanced Anticancer Activity of PF-04691502, a Dual PI3K/mTOR Inhibitor, in Combination With VEGF siRNA Against Non-small-cell Lung Cancer.

Lung cancer is the leading cause of cancer deaths in both men and women in the United States accounting for about 27% of all cancer deceases. In our effort to develop newer therapy for lung cancer, we evaluated the combinatory antitumor effect of siRNA targeting VEGF and the PI3K/mTOR dual inhibitor PF-04691502. We analyzed the anticancer effect of siRNA VEGF and PF-04691502 combination on proliferation, colony formation and migration of A549 and H460 lung cancer cells. Additionally, we assessed the combination treatment antiangiogenic effect on human umbilical vein endothelial cells. Here, we show for the first time that the antiangiogenic siRNA VEGF potentiates the PF-04691502 anticancer activity against non-small-cell lung cancer. We observed a significant (P < 0.05) decrease in cell viability, colony formation, and migration for the combination comparing with the single drug treatment. We also showed a significant (P < 0.05) enhanced effect of the combination treatment inhibiting angiogenesis progression and tube formation organization compared to the single drug treatment groups. Our findings demonstrated an enhanced synergistic anticancer effect of siRNA VEGF and PF-04691502 combination therapy by targeting two main pathways involved in lung cancer cell survival and angiogenesis which will be useful for future preclinical studies and potentially for lung cancer patient management.