Impedimetric sensing platform for sensitive carbendazim detection using MOCVD-synthesized copper graphene.

Nanostructures of graphene were synthesized for electrochemical carbendazim (CBZ) fungicide detection via metal-organic chemical vapor deposition (MOCVD). The arduous process of graphene transfer is eliminated by this innovative approach to MOCVD graphene development. It also generates several defects and impurities and ultimately leads to the uniform deposition of graphene on SiO2/Si. SEM, EDX, and ICP-AES were used to assess the morphological properties and chemical composition of the materials. To obtain in-depth knowledge of the entire system, the electrochemical behavior was also investigated using voltammetric techniques and electrochemical impedance spectroscopy. The interaction of particles of copper with CBZ and the enhanced surface area of graphene, which causes a strong oxidation current, has been demonstrated to achieve the ideal CBZ sensing behavior. The electrode responded linearly at CBZ concentration levels of 1 to 50 nM, and the sensitivity of the sensing materials was estimated to be 0.0337 Ω nM-1. The statistical analysis validates the electrode's exceptional selectivity and remarkable reproducibility in determining CBZ.

Interfacial Strain-Modulated Nanospherical Ni2 P by Heteronuclei-Mediated Growth on Ti3 C2 Tx MXene for Efficient Hydrogen Evolution.

Interface modulation of nickel phosphide (Ni2 P) to produce an optimal catalytic activation barrier has been considered a promising approach to enhance the hydrogen production activity via water splitting. Herein, heteronuclei-mediated in situ growth of hollow Ni2 P nanospheres on a surface defect-engineered titanium carbide (Ti3 C2 Tx ) MXene showing high electrochemical activity for the hydrogen evolution reaction (HER) is demonstrated. The heteronucleation drives intrinsic strain in hexagonal Ni2 P with an observable distortion at the Ni2 P@Ti3 C2 Tx MXene heterointerface, which leads to charge redistribution and improved charge transfer at the interface between the two components. The strain at the Ni2 P@Ti3 C2 Tx MXene heterointerface significantly boosts the electrochemical catalytic activities and stability toward HER in an acidic medium via a combination between experimental results and theoretical calculations. In a 0.5 m H2 SO4 electrolyte, the Ni2 P@Ti3 C2 Tx MXene hybrid shows excellent HER catalytic performance, requiring an overpotential of 123.6 mV to achieve 10 mA cm-2 with a Tafel slope of 39 mV dec-1 and impressive durability over 24 h operation. This approach presents a significant potential to rationally design advanced catalysts coupled with 2D materials and transition metal-based compounds for state-of-the-art high efficiency energy conversions.

The Pine-Needle-Inspired Structure of Zinc Oxide Nanorods Grown on Electrospun Nanofibers for High-Performance Flexible Supercapacitors.

Flexible supercapacitors with high electrochemical performance and stability along with mechanical robustness have gained immense attraction due to the substantial advancements and rampant requirements of storage devices. To meet the exponentially growing demand of microsized energy storage device, a cost-effective and durable supercapacitor is mandatory to realize their practical applications. Here, in this work, the fabrication route of novel electrode materials with high flexibility and charge-storage capability is reported using the hybrid structure of 1D zinc oxide (ZnO) nanorods and conductive polyvinylidene fluoride-tetrafluoroethylene (P(VDF-TrFE)) electrospun nanofibers. The ZnO nanorods are conformably grown on conductive P(VDF-TrFE) nanofibers to fabricate the light-weighted porous electrodes for supercapacitors. The conductive nanofibers acts as a high surface area scaffold with significant electrochemical performance, while the addition of ZnO nanorods further enhances the specific capacitance by 59%. The symmetric cell with the fabricated electrodes presents high areal capacitance of 1.22 mF cm-2 at a current density of 0.1 mA cm-2 with a power density of more than 1600 W kg-1 . Furthermore, these electrodes show outstanding flexibility and high stability with 96% and 78% retention in specific capacitance after 1000 and 5000 cycles, respectively. The notable mechanical durability and robustness of the cell acquire both good flexibility and high performance.

Nanoporous Pt@Au(x)Cu(100-x) by hydrogen evolution assisted electrodeposition of Au(x)Cu(100-x) and galvanic replacement of Cu with Pt: electrocatalytic properties.

Electrodeposition of high-surface-area nanoporous Au-Cu foams under conditions of hydrogen codeposition is studied. The honeycomb-like Au(x)Cu(100-x) foams with 0 ≤ x ≤ 100 are electrodeposited by controlling the amount of corresponding ions in the solution. The amount of metal ions in deposited films follows that in used electrolytes. Compared to monometallic foams, the Au(x)Cu(100-x) structures are characterized by smaller ligament or particle sizes (less than 10 nm) and improved stability. The addition of even a small amount of Cu to the Au matrix is found to dramatically improve the stability of the structure in air environment or an acidic medium. Pt@Au(x)Cu(100-x) structures are formed by the galvanic displacement of Cu from Au(x)Cu(100-x) templates. During the displacement of Cu by Pt, Au serves as a buffer, decreasing mechanical stresses and preventing the detachment of the foam from the substrate. The surface ratio of Pt to Au atoms is controlled by adjusting the amount of Cu in the template. Pt@Au(x)Cu(100-x) electrodes are investigated as novel electrocatalysts for methanol oxidation in alkaline media. The Au-enriched surfaces show higher catalytic activity toward methanol oxidation, while the electrodes with a higher amount of Pt are more stable.

Rigiflex lithography-based nanodot arrays for localized surface plasmon resonance biosensors.

We present a facile and robust means of fabricating metallic nanodot arrays for localized surface plasmon resonance (LSPR) biosensors through the strategic coupling of a polymeric template prepared with rigiflex lithography and a subsequent metallization via electrodeposition. Rigiflex lithography provides the capability to realize large-scale nanosized features as well as process flexibility during contact molding. In addition, the electrodeposition process enables wet-based nanoscale metallization with high pattern fidelity and geometric controllability. Generated metallic nanodot arrays can be used as a general platform for LSPR biosensors via the sequential binding of chemicals and biomolecules. Extinction spectra of the corresponding LSPR signal are measured with UV-vis-NIR spectroscopy, from which the pattern size and shape dependence of LSPR are readily confirmed. The feasibility of a very sensitive biosensor is demonstrated by the targeted binding of human immunoglobulin G, yielding subnanomolar detection capability with high selectivity.

Pseudocapacitive Charge Storage in MXene-V2O5 for Asymmetric Flexible Energy Storage Devices.

Pseudocapacitive asymmetric supercapacitors are promising candidates for achieving high energy density in flexible energy storage devices. However, seeking suitable positive electrode materials that are compatible with negative electrode materials remains a considerable challenge. In the current study, a pseudocapacitive Ti3C2Tx MXene used as negative electrodes is rationally compatible with redox-type V2O5 as positive electrodes, resulting in the assembly of an all-pseudocapacitive Ti3C2Tx MXene//V2O5 asymmetric flexible energy storage device. The solid-state asymmetric device can deliver an energy density of 8.33 mW h cm-3 at a current density of 0.5 A g-1. Moreover, it can operate in an expanded voltage window of 1.5 V, with dominant surface-capacitive charge-storage mechanisms. Additionally, the device can power a yellow light-emitting diode for up to 7 s, indicating the potential of the device for use in practical applications. This study demonstrates the possibility of using other two-dimensional transition-metal carbide nanosheets for high-energy density flexible energy storage devices.

Electrodeposition mechanism of palladium nanotube and nanowire arrays.

Palladium nanotube and nanowire arrays were fabricated by electrodeposition into anodic alumina oxide (AAO) templates. By using alumina templates with different pore sizes and hole mouth morphologies, nanotubes with various diameters and lengths were obtained. The mechanism of nano-structure formation was studied by analyzing the current-time curves. It was found that the time needed for the transformation of the nanostructure from a tube to a wire depends on the size and structure of the template. However, the overall behaviour of the current-time transient is similar and can be divided into four main stages, which provides a powerful in-situ method to control nanotube-nanowire transition during growth. The palladium nanotube arrays have a polycrystalline structure, but a preferred orientation along the (110) direction was observed for the arrays of nanowires. Moreover, the degree of texture increases with decreasing alumina pore size.

Proton-conductive nanochannel membrane for fuel-cell applications.

Novel design of proton conductive membrane for direct methanol fuel cells is based on proton conductivity of nanochannels, which is acquired due to the electric double layer overlap. Proton conductivity and methanol permeability of an array of nanochannels were studied. Anodic aluminum oxide with pore diameter of 20 nm was used as nanochannel matrix. Channel surfaces of an AAO template were functionalized with sulfonic groups to increase proton conductivity of nanochannels. This was done in two steps; at first -SH groups were attached to walls of nanochannels using (3-Mercaptopropyl)-trimethyloxysilane and then they were converted to -SO3H groups using hydrogen peroxide. Treatment steps were analyzed by Fourier Transform Infrared spectroscopy and X-ray Photoelectron Spectroscopy. Proton conductivity and methanol permeability were measured. The data show methanol permeability of membrane to be an order of magnitude lower, than that measured of Nafion. Ion conductivity of functionalized AAO membrane was measured by an impedance analyzer at frequencies ranging from 1 Hz to 100 kHz and voltage 50 mV to be 0.15 Scm(-1). Measured ion conductivity of Nafion membrane was 0.05 Scm(-1). Obtained data show better results in comparison with commonly used commercial available proton conductive membrane Nafion, thus making nanochannel membrane very promising for use in fuel cell applications.

Fabrication of micro- and nano-scale gold patterns on glass by transfer printing.

Nano-transfer printing is a soft-lithographic technique which allows the transfer of metal patterns deposited on a polymer stamp to different surfaces. The nano-transfer printing process allows various nanostructures to be formed without using sophisticated methods and expensive equipment. In the present work, we present the formation of gold micro- and nano-structures on a glass surface using a self-assembled monolayer as a transfer agent. A polydimethylsiloxane replica was fabricated from a master chip that has micro- and nano-meter size patterns. A thin gold layer was deposited on the replica stamp and the glass surface was modified with a self-assembled monolayer of 3-mercaptopropyltrimethoxysilane, followed by the transfer of the gold patterns from the polydimethylsiloxane stamp to glass by simple contact printing. The patterns sp obtained were characterized using scanning electron microscopy and optical microscopy.

Recent Advances in 2D Inorganic Nanomaterials for SERS Sensing.

Surface-enhanced Raman spectroscopy is a powerful and sensitive analytical tool that has found application in chemical and biomolecule analysis and environmental monitoring. Since its discovery in the early 1970s, a variety of materials ranging from noble metals to nanostructured materials have been employed as surface enhanced Raman scattering (SERS) substrates. In recent years, 2D inorganic materials have found wide use in the development of SERS-based chemical sensors owing to their unique thickness dependent physico-chemical properties with enhanced chemical-based charge-transfer processes. Here, recent advances in the application of various 2D inorganic nanomaterials, including graphene, boron nitride, semiconducting metal oxides, and transition metal chalcogenides, in chemical detection via SERS are presented. The background of the SERS concept, including its basic theory and sensing mechanism, along with the salient features of different nanomaterials used as substrates in SERS, extending from monometallic nanoparticles to nanometal oxides, is comprehensively discussed. The importance of 2D inorganic nanomaterials in SERS enhancement, along with their application toward chemical detection, is explained in detail with suitable examples and illustrations. In conclusion, some guidelines are presented for the development of this promising field in the future.

Effect of morphological change of copper-oxide fillers on the performance of solid polymer electrolytes for lithium-metal polymer batteries.

Solid polymer electrolytes (SPEs) for Li-metal polymer batteries are prepared, in which poly(ethylene oxide) (PEO), lithium bis(trifluoromethylsulfonyl)imide (LiTFSI), and copper-oxide fillers are formulated. Their structural and electrochemical properties are analyzed when the morphology of the copper-oxide fillers has been modulated to spherical or dendritic structure. The ionic conductivity obtained by electrochemical impedance spectroscopy (EIS) has been increased to 1.007 × 10-4 S cm-1 at 30 °C and 1.368 × 10-3 S cm-1 at 60 °C, as the 5 wt% dendritic fillers have been added to the SPEs. This ionic conductivity value is 1.3 times higher than that of 5 wt% spherical filler-contained SPEs. The analyses of differential scanning calorimetry (DSC) and X-ray diffraction (XRD) indicate that the increase of ionic conductivity is due to the remarkable decrease of crystallinity upon the addition of copper-oxide filler into PEO matrix of SPEs. The fabricated SPEs with the dendritic copper-oxide fillers present a total ionic transference number of 0.99 and a lithium-ion transference number of 0.38. More importantly, it presents a stable potential window of 2.0-4.8 V at 25 °C and high thermal stability up to 300 °C. The specific discharge capacity of the prepared cell with the dendritic filler-contained SPEs is measured to be 51 mA h g-1 and 125 mA h g-1 under 0.1 current-rate (C-rate) at 25 °C and 60 °C, respectively. In this study, the ionic conductivity and the electrochemical performance of the PEO-based polymer electrolyte have been evaluated when morphologically different copper-oxide fillers have been incorporated into the PEO matrix. We have also confirmed the safety and the flexibility of the prepared solid polymer electrolytes when they are used in flexible lithium-metal polymer batteries (LMPBs).

Monitoring FET flow control and wall adsorption of charged fluorescent dye molecules in nanochannels integrated into a multiple internal reflection infrared waveguide.

Using Si as the substrate, we have fabricated multiple internal reflection infrared waveguides embedded with a parallel array of nanofluidic channels. The channel width is maintained substantially below the mid-infrared wavelength to minimize infrared scattering from the channel structure and to ensure total internal reflection at the channel bottom. A Pyrex slide is anodically bonded to the top of the waveguide to seal the nanochannels, while simultaneously enabling optical access in the visible range from the top. The Si channel bottom and sidewalls are thermally oxidized to provide an electrically insulating barrier, and the Si substrate surrounding the insulating SiO(2) layer is selectively doped to function as a gate. For fluidic field effect transistor (FET) control, a DC potential is applied to the gate to manipulate the surface charge on SiO(2) channel bottom and sidewalls and therefore their zeta-potential. Depending on the polarity and magnitude, the gate potential can accelerate, decelerate, or reverse the flow. Here, we demonstrate that this nanofluidic infrared waveguide can be used to monitor the FET flow control of charged, fluorescent dye molecules during electroosmosis by multiple internal reflection Fourier transform infrared spectroscopy. Laser scanning confocal fluorescence microscopy is simultaneously used to provide a comparison and verification of the IR analysis. Using the infrared technique, we probe the vibrational modes of dye molecules, as well as those of the solvent. The observed infrared absorbance accounts for the amount of dye molecules advancing or retracting in the nanochannels, as well as adsorbing to and desorbing from the channel bottom and sidewalls.

Adhesion of Pseudomonas putida NCIB 9816-4 to a naphthalene-contaminated soil.

The effect of a soil contaminant on the initial adhesion to the soil of a contaminant-degrading soil microorganism in the exponential phase was investigated using naphthalene as the soil contaminant and Pseudomonas putida strain NCIB 9816-4 as the naphthalene-degrading bacteria. P. putida strain DK-1, which is not capable of degrading naphthalene, was used as a control. P. putida NCIB 9816-4 in the exponential phase showed the more adhesion to the soil than that in the stationary phase. In contrast, P. putida DK-1 showed the increased adhesion to the soil when it was in the stationary phase. P. putida NCIB 9816-4 in the exponential phase showed the preferred adhesion to the naphthalene-contaminated soil, whereas the adhesion of P. putida DK-1 was not affected by naphthalene. From the data of surface hydrophobicities of the cells and the soil, the microbial adhesion, especially the initial adhesion to the naphthalene-contaminated soil, takes place through the hydrophobic interaction. We suspect that the surface hydrophobicity of P. putida NCIB 9816-4 in the exponential phase might be increased during the uptake of naphthalene, which caused the preferred adhesion to the naphthalene-contaminated soil.

Enhancement of magnetic resonance contrast effect using ionic magnetic clusters.

Precise diagnosis by magnetic resonance imaging (MRI) requires sensitive magnetic resonance probes to detect low concentrations of magnetic substances. Ionic magnetic clusters (IMCs) as versatile magnetic probes were successfully synthesized for enhancing the magnetic resonance (MR) contrast effect as well as ensuring high water solubility. IMCs with various sizes were prepared by assembly of MNCs using cationic cetyltrimethylammonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS). To synthesize IMCs in the aqueous phase, magnetic nanocrystals in an organic solvent were assembled with CTAB and SDS using the nanoemulsion method, to fabricate cationic magnetic clusters (CMCs) and anionic magnetic clusters (AMCs), respectively. IMCs demonstrated ultrasensitivity by MR imaging and sufficient magnetic mobility under an external magnetic field.

Surface Functional Groups and Electrochemical Behavior in Dimethyl Sulfoxide-Delaminated Ti3 C2 Tx MXene.

Functional groups in two-dimensional (2D) Ti3 C2 Tx MXene are an important factor influencing electrochemical performance in many applications involving energy storage, electrochemical sensors, and water purification. However, after dimethyl sulfoxide (DMSO) delamination, the effect of surface functionalities in Ti3 C2 Tx is still unclear and there are no systematic reports on its capacitive behavior. Experiments and theoretical calculations confirm the relationship between different surface functionalities, the DMSO delamination effect, and the electrochemical behavior of the DMSO-delaminated Ti3 C2 Tx . The dominant -O and -OH terminations are attributed for surfaces delaminated by using HF [Ti3 C2 Tx (HF)] and LiF/HCl [Ti3 C2 Tx (LiF/HCl)], respectively. Theoretical results are also in agreement with experimental results in that -OH terminations are essential for the formation of a free-standing film. Compared to non-delaminated Ti3 C2 Tx (HF) (similar O/F ratios of 1.37 and 1.42), there is a significant DMSO delamination effect for Ti3 C2 Tx (LiF/HCl) because of different O/F ratios of 2.9 and 3.6. Additionally, the delaminated Ti3 C2 Tx (LiF/HCl) electrodes deliver a higher capacitance of 508 F cm-3 than that of 333 F cm-3 for the delaminated Ti3 C2 Tx (HF), although it exhibited lower equivalent series resistance, lower interlayer spacing, and slightly lower specific surface area. This study provides direct and systematic experimental evidence for different functional groups in Ti3 C2 Tx MXene based on the DMSO delamination effect.

Mediator- and co-catalyst-free direct Z-scheme composites of Bi2WO6-Cu3P for solar-water splitting.

Exploring new single, active photocatalysts for solar-water splitting is highly desirable to expedite current research on solar-chemical energy conversion. In particular, Z-scheme-based composites (ZBCs) have attracted extensive attention due to their unique charge transfer pathway, broader redox range, and stronger redox power compared to conventional heterostructures. In the present report, we have for the first time explored Cu3P, a new, single photocatalyst for solar-water splitting applications. Moreover, a novel ZBC system composed of Bi2WO6-Cu3P was designed employing a simple method of ball-milling complexation. The synthesized materials were examined and further investigated through various microscopic, spectroscopic, and surface area characterization methods, which have confirmed the successful hybridization between Bi2WO6 and Cu3P and the formation of a ZBC system that shows the ideal position of energy levels for solar-water splitting. Notably, the ZBC composed of Bi2WO6-Cu3P is a mediator- and co-catalyst-free photocatalyst system. The improved photocatalytic efficiency obtained with this system compared to other ZBC systems assisted by mediators and co-catalysts establishes the critical importance of interfacial solid-solid contact and the well-balanced position of energy levels for solar-water splitting. The promising solar-water splitting under optimum composition conditions highlighted the relationship between effective charge separation and composition.

Neutral pH Gel Electrolytes for V2O5·0.5H2O-Based Energy Storage Devices.

Gel electrolytes are considered to be promising candidates for the use in supercapacitors. It is worthy to systematically evaluate the internal electrochemical mechanisms with a variety of cations (poly(vinyl alcohol) (PVA)-based Li+, Na+, and K+) toward redox-type electrode. Herein, we describe a quasi-solid-state PVA-KCl gel electrolyte for V2O5·0.5H2O-based redox-type capacitors, effectively avoiding electrochemical oxidation and structural breakdown of layered V2O5·0.5H2O during 10 000 charge-discharge cycles (98% capacitance retention at 400 mV s-1). With the gel electrolyte, symmetric V2O5·0.5H2O-reduced graphene oxide (V2O5·0.5H2O-rGO) devices exhibited a volumetric capacitance of 136 mF cm-3, which was much higher than that of 68 mF cm-3 for PVA-NaCl and 45 mF cm-3 for PVA-LiCl. Additionally, hybrid full cells of activated carbon cloth//V2O5·0.5H2O-rGO delivered an energy density of 102 µWh cm-3 and a power density of 73.38 mW cm-3 over a wide potential window of 2 V. The present study provides direct experimental evidence for the contribution of PVA-KCl gel electrolytes toward quick redox reactions for redox-type capacitors, which is also helpful for the development of neutral pH gel electrolytes for energy storage devices.

Methyl Acetate Synthesis by Esterification on the Modified Ferrierite: Correlation of Acid Sites Measured by Pyridine IR and NH3-TPD for Steady-State Activity.

The amounts of Brønsted acid sites on K, P, and Zr-modified microporous Ferrierite zeolite were investigated through pyridine FT-IR and NH3-TPD analyses. P-modified Ferrierite showed a superior catalytic activity for methyl acetate synthesis by esterification of methanol and acetic acid. The catalytic activity at steady-state with the acidic properties of as-prepared catalysts was well correlated with the results of pyridine FT-IR (intensity ratio of Brønsted acid sites to total acid sites) compared with that of NH3-TPD. The results can suggest the proper and simple method to estimate the esterification activity at steady-state using the measured acid sites on the as-prepared zeolites.

Dendritic Ni(Cu)-polypyrrole hybrid films for a pseudo-capacitor.

Dendritic Ni(Cu)-polypyrrole hybrid films are fabricated for a pseudo-capacitor in a unique morphology using two simple methods: electro-deposition and electrochemical de-alloying. Three-dimensional structures of porous dendrites are prepared by electro-deposition within the hydrogen evolution reaction (HER) at a high cathodic potential; the high-surface-area structure provides sufficient redox reactions between the electrodes and the electrolyte. The dependence of the active-layer thickness on the super-capacitor performance is also investigated, and the 60 µm-thick Ni(Cu)PPy hybrid electrode presents the highest performance of 659.52 F g(-1) at the scan rate of 5 mV s(-1). In the thicker layers, the specific capacitance became smaller due to the diffusion limitation of the ions in an electrolyte. The polypyrrole-hybridization on the porous dendritic Ni(Cu) electrode provides superior specific capacitance and excellent cycling stability due to the improvement in electric conductivity by the addition of conducting polypyrrole in the matrices of the dendritic nano-porous Ni(Cu) layer and the synergistic effect of composite materials.

Surfactant Effects on the Morphology and Pseudocapacitive Behavior of V2 O5 ⋠H2 O.

To overcome the drawback of low electrical conductivity within supercapacitor applications, several surfactants are used for nanoscale V2 O5 to enhance the specific surface area. Polyethylene glycol 6000 (PEG-6000), sodium dodecylbenzene sulfonate (SDBS), and Pluronic P-123 (P123) controllers, if used as soft templates, easily form large specific surface area crystals. However, the specific mechanism through which this occurs and the influence of these surfactants is not clear for V2 O5 ⋅H2 O. In the present study, we aimed to investigate the mechanism of crystal growth through hydrothermal processes and the pseudocapacitive behavior of these crystals formed by using diverse surfactants, including PEG-6000, SDBS, and P123. Our results show that different surfactants can dramatically influence the morphology and capacitive behavior of V2 O5 ⋅H2 O powders. Linear nanowires, flower-like flakes, and curly bundled nanowires can be obtained because of electrostatic interactions in the presence of PEG-6000, SDBS, and P123, respectively. Furthermore, the electrochemical performance of these powders shows that the nanowires, which are electrodes mediated by PEG-6000, exhibit the highest capacitance of 349 F g(-1) at a scan rate of 5 mV s(-1) of all the surfactants studied. However, a symmetric P123 electrode comprising curly bundled nanowires with numerous nanopores showed an excellent and stable specific capacitance of 127 F g(-1) after 200 cycles. This work is beneficial to understanding the fundamental role of the surfactant in the assisted growth of V2 O5 ⋅H2 O and the resulting electrochemical properties of the pseudocapacitors, which could be useful for the future design of appropriate materials.