RESUMO
Porous polymer networks (PPNs) are promising candidates as photocatalysts for hydrogen production. Constructing a donor-acceptor structure is known to be an effective approach for improving photocatalytic activity. However, the process of how a functional group of a monomer can ensure photoexcited charges transfer and improve the hydrogen evolution rate (HER) has not yet been studied on the molecular level. Herein, we design and synthesize two kinds of triazatruxene (TAT)-based PPNs: TATR-PPN with a hexyl (R) group and TAT-PPN without the hexyl group, to understand the relationship between the presence of the functional group and charge transfer. The hexyl group on the TAT unit was found to ensure the transfer of photoexcited electrons from a donor unit to an acceptor unit and endowed the TATR-PPN with stable hydrogen production.
RESUMO
An ultrathin tactile sensor with directional sensitivity and capable of mapping at a high spatial resolution is proposed and demonstrated. Each sensor node consists of two gallium nitride (GaN) nanopillar light-emitting diodes. Shear stress applied on the nanopillars causes the electrons and holes to separate in the radial direction and reduces the light intensity emitted from the nanopillars. A sensor array comprising 64 sensor nodes was designed and fabricated. Two-dimensional directional sensitivity was experimentally confirmed with a dynamic range of 1-30 mN and an accuracy of ±1.3 mN. Tracking and mapping of an external force moving across the sensor array were also demonstrated. Finally, the proposed tactile sensor's sensitivity was tested with a fingertip gently moving across the sensor array. The sensor successfully registered the finger movement's direction and fingerprint pattern.
Assuntos
Fenômenos Mecânicos , Tato , LuzRESUMO
An LED chip containing monolithically integrated red, green, and blue channels was fabricated and characterized. Using local strain engineering in gallium nitride p-i-n nanopillar structures, each color channel emits a distinct color with emission wavelength determined entirely by the diameter of the nanopillar. The crosstalk between color channels is negligible. As a result, individually addressable color channels can be integrated on the same substrate which will be suitable for color-tunable lighting applications. Optical and electrical properties were measured and discussed. Fabrication challenges which degraded power efficiency of the shorter-wavelength channel were analyzed. Potential strategies for improvements were proposed.
RESUMO
A parabolic nanolens array coupled to the emission of a nanopillar micro-light emitting diode (LED) color pixel is shown to reduce the far field divergence. For a blue wavelength LED, the total emission is 95% collimated within a 0.5 numerical aperture zone, a 3.5x improvement over the same LED without a lens structure. This corresponds to a half-width at half-maximum (HWHM) line width reduction of 2.85 times. Using a resist reflow and etchback procedure, the nanolens array dimensions and parabolic shape are formed. Experimental measurement of the far field emission shows a HWHM linewidth reduction by a factor of 2x, reducing the divergence over the original LED.
RESUMO
We report flexible resistive random access memory (ReRAM) arrays fabricated by using NiO x /GaN microdisk arrays on graphene films. The ReRAM device was created from discrete GaN microdisk arrays grown on graphene films produced by chemical vapor deposition, followed by deposition of NiO x thin layers and Au metal contacts. The microdisk ReRAM arrays were transferred to flexible plastic substrates by a simple lift-off technique. The electrical and memory characteristics of the ReRAM devices were investigated under bending conditions. Resistive switching characteristics, including cumulative probability, endurance, and retention, were measured. After 1000 bending repetitions, no significant change in the device characteristics was observed. The flexible ReRAM devices, constructed by using only inorganic materials, operated reliably at temperatures as high as 180 °C.
RESUMO
Direct epitaxial growth of inorganic compound semiconductors on lattice-matched single-crystal substrates has provided an important way to fabricate light sources for various applications including lighting, displays and optical communications. Nevertheless, unconventional substrates such as silicon, amorphous glass, plastics, and metals must be used for emerging optoelectronic applications, such as high-speed photonic circuitry and flexible displays. However, high-quality film growth requires good matching of lattice constants and thermal expansion coefficients between the film and the supporting substrate. This restricts monolithic fabrication of optoelectronic devices on unconventional substrates. Here, we describe methods to grow high-quality gallium nitride (GaN) microdisks on amorphous silicon oxide layers formed on silicon using micropatterned graphene films as a nucleation layer. Highly crystalline GaN microdisks having hexagonal facets were grown on graphene dots with intermediate ZnO nanowalls via epitaxial lateral overgrowth. Furthermore, whispering-gallery-mode lasing from the GaN microdisk with a Q-factor of 1200 was observed at room temperature.
RESUMO
We demonstrated the successful growth of catalyst-free InN nanorods on (0001) Al2O3 substrates using metal-organic chemical vapor deposition. Morphological evolution was significantly affected by growth temperature. At 710 degrees C, complete InN nanorods with typical diameters of 150 nm and length of approximately 3.5 microm were grown with hexagonal facets. theta-2theta X-ray diffraction measurement shows that (0002) InN nanorods grown on (0001) Al2O3 substrates were vertically aligned along c-axis. In addition, high resolution transmission electron microscopy indicates the spacing of the (0001) lattice planes is 0.28 nm, which is very close to that of bulk InN. The electron diffraction patterns also revealed that the InN nanorods are single crystalline with a growth direction along (0001) with (10-10) facets.
RESUMO
One critical factor for bolometer sensitivity is efficient electromagnetic heating of thermistor materials, which plasmonic nanogap structures can provide through the electric field enhancement. In this report, using finite element method simulation, electromagnetic heating of nanorod dimer antennas with a nanogap filled with vanadium dioxide (VO2) was studied for long-wavelength infrared detection. Because VO2 is a thermistor material, the electrical resistance between the two dimer ends depends on the dimer's temperature. The simulation results show that, due to the high heating ability of the nanogap, the temperature rise is several times higher than expected from the areal coverage. This excellent performance is observed over various nanorod lengths and gap widths, ensuring wavelength tunability and ultrafast operating speed, thereby making the dimer structures a promising candidate for high sensitivity bolometers.
RESUMO
We report the fabrication and characteristics of vertical microtube light-emitting diode (LED) arrays with a metal core inside the devices. To make the LEDs, gallium nitride (GaN)/indium gallium nitride (In(x)Ga(1-x)N)/zinc oxide (ZnO) coaxial microtube LED arrays were grown on an n-GaN/c-aluminum oxide (Al2O3) substrate. The microtube LED arrays were then lifted-off the substrate by wet chemical etching of the sacrificial ZnO microtubes and the silicon dioxide (SiO2) layer. The chemically lifted-off LED layer was then transferred upside-down on other supporting substrates. To create the metal cores, titanium/gold and indium tin oxide were deposited on the inner shells of the microtubes, forming n-type electrodes inside the metal-cored LEDs. The characteristics of the resulting devices were determined by measuring electroluminescence and current-voltage characteristic curves. To gain insights into the current-spreading characteristics of the devices and understand how to make them more efficient, we modeled them computationally.
RESUMO
The epitaxial lateral overgrowth (ELOG) of GaN microdisks on graphene microdots and the fabrication of flexible light-emitting diodes (LEDs) using these microdisks is reported. An ELOG technique with only patterned graphene microdots is used, without any growth mask. The discrete micro-LED arrays are transferred onto Cu foil by a simple lift-off technique, which works reliably under various bending conditions.
RESUMO
ReRAM is a compelling candidate for next-generation non-volatile memory owing to its various advantages. However, fluctuation of operation parameters are critical weakness occurring failures in 'reading' and 'writing' operations. To enhance the stability, it is important to understand the mechanism of the devices. Although numerous studies have been conducted using AFM or TEM, the understanding of the device operation is still limited due to the destructive nature and/or limited imaging range of the previous methods. Here, we propose a new hybrid device composed of ReRAM and LED enabling us to monitor the conducting filament (CF) configuration on the device scale during resistive switching. We directly observe the change in CF configuration across the whole device area through light emission from our hybrid device. In contrast to former studies, we found that minor CFs were formed earlier than major CF contributing to the resistive switching. Moreover, we investigated the substitution of a stressed major CF with a fresh minor CF when large fluctuation of operation voltage appeared after more than 50 times of resistive switching in atmospheric condition. Our results present an advancement in the understanding of ReRAM operation mechanism, and a step toward stabilizing the fluctuations in ReRAM switching parameters.
RESUMO
Plan-view and cross-sectional transmission electron microscopy images show the microstructural properties of GaN thin films grown on graphene layers, including dislocation types and density, crystalline orientation and grain boundaries. The roles of ZnO nanowalls and GaN intermediate layers in the heteroepitaxial growth of GaN on graphene, revealed by cross-sectional transmission electron microscopy, are also discussed.
Assuntos
Gálio/química , Grafite/química , Nanoestruturas/química , Nanotecnologia/métodos , Óxido de Zinco/químicaRESUMO
We fabricated transferable gallium nitride (GaN) thin films and light-emitting diodes (LEDs) using graphene-layered sheets. Heteroepitaxial nitride thin films were grown on graphene layers by using high-density, vertically aligned zinc oxide nanowalls as an intermediate layer. The nitride thin films on graphene layers show excellent optical characteristics at room temperature, such as stimulated emission. As one of the examples for device applications, LEDs that emit strong electroluminescence emission under room illumination were fabricated. Furthermore, the layered structure of a graphene substrate made it possible to easily transfer GaN thin films and GaN-based LEDs onto foreign substrates such as glass, metal, or plastic.