Fibrinogen on extracellular vesicles derived from polyhexamethylene guanidine phosphate-exposed mice induces inflammatory effects via integrin ß.

Polyhexamethylene guanidine phosphate (PHMG-p), used as a humidifier disinfectant, causes interstitial lung disease, obliterative bronchiolitis, and lung fibrosis; however, little is known about its effect on intercellular interactions. Extracellular vesicles (EVs), which carry diverse compounds including proteins, RNA, and DNA to mediate cell-to-cell communication through their paracrine effects, have been highlighted as novel factors in lung fibrogenesis. This study aimed to identify the effect of proteins on small EVs (sEVs) from bronchoalveolar lavage fluid (BALF) of the recipient cells after PHMG-p exposure. A week after intratracheal administration of PHMG-p, sEVs were isolated from BALF of tissue showing overexpressed inflammatory and fibrosis markers. To investigate the role of sEVs in inflammation, naïve macrophages were cultured with sEVs, which induced their activation. To identify sEV proteins that are associated with these responses, proteomics analysis was performed. In the gene ontology analysis, coagulation, fibrinolysis, and hemostasis were associated with the upregulated proteins in sEVs. The highest increase was observed in fibrinogen levels, which was also related to those gene ontologies. We validated role of exosomal fibrinogen in inflammation using recombinant fibrinogen and an inhibitor of the integrin, which is the binding receptor for fibrinogen. Overall, we elucidated that increased fibrinogen levels in the early sEVs-PHMG activated inflammatory response during early fibrosis. These results suggest that sEVs from the BALF of PHMG-p-exposed mice could aggravate fibrogenesis by activating naïve macrophages via various proteins in the sEVs, Furthermore, this finding will be broadening the spectrum of communicating mediators.

Polystyrene microplastic particles induce autophagic cell death in BEAS-2B human bronchial epithelial cells.

The detection of high levels of microplastics in indoor and outdoor air has increased concerns regarding its toxic effects on the respiratory system. They are not easily degradable and can be deposited deep in the lungs. Although several studies have reported inhalation toxicities of microplastics, they are still controversial due to a lack of evidence. Herein, we evaluated the inhalation toxicities of three differently charged polystyrene microplastics (PS-MPs), the most abundant microplastics in the air. Cytotoxicity and ROS generation were evaluated using WST-1 and DCF-DA assays, respectively. To evaluate the toxic effects on the lung, inflammatory responses were analyzed after repeated exposure to the PS-MPs through intratracheal instillation. To explore the mechanism of toxicity, autophagy and ER stress-associated proteins were analyzed. Only the positively charged PS-MPs (NH2 -PS-MPs) showed cytotoxicity and increased ROS generation in BEAS-2B cells. Similarly, only NH2 -PS-MPs significantly increased the expression and secretion of the pro-inflammatory cytokine IL-ß in the animal experiments. The expression of ER stress proteins indicated that NH2 -PS-MPs increased ER stress via PERK-EIF2α and ATF4-CHOP pathways. Moreover, accumulation of NH2 -PS-MPs in lysosomes and deformity of the nucleus were observed in BEAS-2B cells with autophagy induction. Taken together, our results demonstrated that NH2 -PS-MPs induced autophagic cell death in bronchial epithelial cells, leading to inflammatory responses in the lungs. These results suggest that repeated inhalation of microplastics can result in inflammatory responses in the lung through cellular damage of lung epithelial cells, and that inhalation microplastics should be monitored to reduce inhalation health risks.

Post-traumatic Telecanthus Induced by a Missed Diagnosis of Avulsion Fracture of the Medial Canthal Tendon.

Telecanthus is commonly accompanied by severe naso-orbito-ethmoid fractures. If there is only an avulsion fracture of the medial canthal tendon (MCT), the initial diagnosis may be missed, and post-traumatic telecanthus may follow. To avoid misdiagnosis of post-traumatic telecanthus, the following should be considered: avulsion fracture of the MCT should be suspected in the presence of an injury or edema of the medial canthal area; the facial computed tomography images should be carefully analyzed to confirm the presence of bone segment caused by the avulsion fracture of the MCT; physical examinations, such as the bowstring test and bimanual palpation, also provide essential data for early diagnosis. And even if early diagnosis is delayed, post-traumatic telecanthus can be improved through aggressive surgical correction.

Cosmetic Open Rhinoplasty in Acute Nasal Bone Fracture With Pre-Existing Deformity.

The simultaneous reduction of nasal bone fracture and cosmetic rhinoplasty is a challenging procedure, because of fracture severity and skeletal instability. Our aim was to investigate the surgical strategy and outcomes of cosmetic rhinoplasty according to the pre-existing nasal deformity when performing simultaneous reduction of nasal bone fracture and cosmetic rhinoplasty. In total, 71 patients who underwent cosmetic rhinoplasty were included. All patients were categorized according to pre-existing deformity, dorsal hump and irregularities, and deviation of the nose, wide nose, and flat nasal dorsum. The authors performed individual maneuvers to correct each deformity. Autologous tissue was used in all maneuvers for graft. Photoanalysis was performed to measure the deviation, nasal length, radix height, dorsal height, tip projection, nasofrontal angle, and nasolabial angle. Subjective evaluation of the functional and esthetic problems was confirmed through rhinoplasty outcome evaluation. In the analysis of the photographs, most patients presented improved scores ( P <0.05). The scores of satisfaction were significantly higher in the postoperative state ( P <0.05). As a postoperative complication, 2 cases of deviated tip occurred due to septal instability and were successfully revised with septoplasty and columellar strut graft. The authors created a harmonious face by evaluating, categorizing, and treating each deformity of the nose in patients with nasal fractures according to our algorithm.

Modulation of Ligand-Gated Glycine Receptors Via Functional Monoclonal Antibodies.

Ion channels are targets of considerable therapeutic interest to address a wide variety of neurologic indications, including pain perception. Current pharmacological strategies have focused mostly on small molecule approaches that can be limited by selectivity requirements within members of a channel family or superfamily. Therapeutic antibodies have been proposed, designed, and characterized to alleviate this selectivity limitation; however, there are no Food and Drug Administration-approved therapeutic antibody-based drugs targeting ion channels on the market to date. Here, in an effort to identify novel classes of engineered ion channel modulators for potential neurologic therapeutic applications, we report the generation and characterization of six (EC50 < 25nM) Cys-loop receptor family monoclonal antibodies with modulatory function against rat and human glycine receptor alpha 1 (GlyRα1) and/or GlyRα3. These antibodies have activating (i.e., positive modulator) or inhibiting (i.e., negative modulator) profiles. Moreover, GlyRα3 selectivity was successfully achieved for two of the three positive modulators identified. When dosed intravenously, the antibodies achieved sufficient brain exposure to cover their calculated in vitro EC50 values. When compared head-to-head at identical exposures, the GlyRα3-selective antibody showed a more desirable safety profile over the nonselective antibody, thus demonstrating, for the first time, an advantage for GlyRα3-selectivity. Our data show that ligand-gated ion channels of the glycine receptor family within the central nervous system can be functionally modulated by engineered biologics in a dose-dependent manner and that, despite high protein homology between the alpha subunits, selectivity can be achieved within this receptor family, resulting in future therapeutic candidates with more desirable drug safety profiles. SIGNIFICANCE STATEMENT: This study presents immunization and multiplatform screening approaches to generate a diverse library of functional antibodies (agonist, potentiator, or inhibitory) raised against human glycine receptors (GlyRs). This study also demonstrates the feasibility of acquiring alpha subunit selectivity, a desirable therapeutic profile. When tested in vivo, these tool molecules demonstrated an increased safety profile in favor of GlyRα3-selectivity. These are the first reported functional GlyR antibodies that may open new avenues to treating central nervous system diseases with subunit selective biologics.

Reprogrammed lung epithelial cells by decrease of miR-451a in extracellular vesicles contribute to aggravation of pulmonary fibrosis.

Extracellular vesicles (EVs) play novel roles in homeostasis through cell-to-cell communication in human airways via transferring miRNAs. However, the contribution of EV miRNAs to pulmonary phenotypic homeostasis is not clearly understood. Hence, the aim of this study was to elucidate the functional role of miRNAs obtained from epithelium-derived EVs in lung fibrogenesis. Pulmonary fibrosis was induced by exposure of polyhexamethylene guanidine phosphate (PHMG-p)-instilled mice. In histopathological changes, a clear phenotypic change was observed in bronchial epithelium. For figuring out the role of EVs derived from conditioned media of untreated cells (EV-Con) and PHMG-p-treated BEAS-2B (EV-PHMG), significant increase in EVs released from PHMG-p-treated BEAS-2B was detected. Functional analysis with targets of differentially expressed miRNAs in EVs was annotated to epithelial-mesenchymal transition (EMT). Especially, the most abundant miRNA, miR-451a, was downregulated in EV of PHMG-p-treated BEAS-2B cells. We found that odd-skipped related 1 (OSR1) was a putative target for miR-451a, which had been known as a transcription factor of several fibrosis-associated genes. Transfer of decreased miR-451a via EV-PHMG upregulated OSR1 and induced EMT compared to Con-EV-treated cells. In pulmonary fibrosis mice, miR-451a levels were significantly reduced in EV derived from bronchoalveolar lavage fluid and OSR1 expression was increased in lung tissues of mice with PHMG-p exposure. MiR-451a-transfected EVs markedly alleviated fibrogenesis in the PHMG-p-exposed lungs. Low level of miR-451a in EVs modulated EMT and fibrogenesis in recipient cells by increasing OSR1 levels in vitro and in vivo. Our results suggest that transferring EV miR-451a induces anti-fibrotic autocrine effect by downregulating its target, OSR1 maintaining pulmonary homeostasis disrupted by PHMG-p exposure, which can be a potential therapeutic target.

Multiple Delayed Complications at Different Time Points After AQUAfilling Filler Injection for Facial Rejuvenation.

ABSTRACT: Delayed inflammatory and infectious complications occurred in a 63-year-old woman after receiving AQUAfilling filler injection in the forehead and nasolabial folds. The complications were idiopathic and occurred at different time points at different sites. Her condition improved after the removal of the injected materials and capsule, and administration of intravenous antibiotics. Although injection sites differ, inflammation can occur at any site at different time points. The possibility of inflammation at other injection sites should always be considered during periodic follow-up, even if the filler injection site initially shows no signs of complications.Level of Evidence: Level IV.

The Incidence of Traumatic Optic Neuropathy Associated With Subtypes of Orbital Wall Fracture.

BACKGROUND: Traumatic optic neuropathy (TON) is a rare disease but leaves critical sequelae to patient. Purpose of this study is to evaluate the incidence of TON in each orbital wall fracture. MATERIALS AND METHODS: Retrospective review of 2629 patients with orbital wall fracture was performed in from January 2010 to March 2019, based on diagnostic code, Korean Standard Classification of Diseases, 7th Revision. The orbital wall fractures were divided into 4 subtypes: superior, medial, inferior, and lateral wall. Incidence of TON is analyzed according to subtypes, single and multiple wall fracture. RESULTS: Among 2629 patients with orbital wall fractures, 27 patients were diagnosed with TON with an incidence of 1.02%. In single wall fracture, only lateral wall showed significantly high TON incidence, which only zygomatic fracture was included in single lateral wall fracture. In multiple wall fracture, it was statistically significant in the superior wall. CONCLUSIONS: Fracture on lateral and superior orbital wall showed a tendency to increase the incidence of TON. Based on the above results, radiologic evaluation and physical examination is necessary for patient who has lateral and superior orbital wall fracture.

Changes in Bone Marrow Lesions Following Root Repair Surgery Using Modified Mason-Allen Stitches in Medial Meniscus Posterior Root Tears.

Root repair can prevent osteoarthritis (OA) by restoring hoop tension in medial meniscus posterior root tears (MMPRTs). This study aims to investigate bone marrow edema (BME) lesions known to be associated with OA following MMPRTs. Methods: Thirty patients with transtibial pull-out repair were recruited. Subchondral BME lesions were evaluated using magnetic resonance imaging (MRI) at 1-year follow-ups. Participants were categorized into three groups: no change of BME lesions (group one), improved BME lesions (group two) and worsened BME lesions (group three). Clinical scores and radiological outcomes, specifically Kellgren-Lawrence grade, medial joint space width and cartilage grade and meniscal extrusion were evaluated and compared between groups. Results: After surgery, twenty-three patients with no BME, three patients with BME lesions on the medial femoral condyle, one patient with BME lesions on the medial tibia plateau and three patients with BME lesions on both were investigated. A total of 20 patients in group one (66.7%) showed no change in BME lesions. In group two, seven patients (23.3%) presented with improved BME lesions. Only three patients (10%) showed worsened BME lesions (group three). Moreover, Lysholm scores and the rate of progression of cartilage grades were significantly worse in group three patients. Meniscal extrusion was significantly reduced in group two, whereas extrusion was significantly progressed in group three. Conclusion: Patients with worsened BME lesions showed less favorable outcomes than other patients. A decrease in meniscal extrusion can have a positive effect on BME lesions after root repair.

Anti-fibrotic effects of brevilin A in hepatic fibrosis via inhibiting the STAT3 signaling pathway.

Hepatic fibrosis is a chronic liver disease characterized by the accumulation of extracellular matrix (ECM). Activation of hepatic stellate cells (HSCs) after repetitive liver damage is a key event in hepatic fibrogenesis. As part of ongoing research projects to identify pharmacologically effective natural products, the phytochemical investigation of a MeOH extract of Centipeda minima led to the isolation of a sesquiterpene lactone, brevilin A, which was explored to elucidate potential anti-fibrotic effects by reversing HSC activation. First, we observed that transforming growth factor (TGF)-ß1 treatment significantly increased the expression levels of HSC activation marker, α-smooth muscle actin (α-SMA), and ECM protein such as collagen and fibronectin. Then, we demonstrated that brevilin A reversed the TGF-ß1-induced increase in protein and mRNA expression levels of α-SMA and collagen. To investigate the underlying molecular mechanism of brevilin A, we evaluated the effects of brevilin A on the STAT3 signaling pathway. STAT3 phosphorylation, increased by TGF-ß1 treatment, was strongly inhibited by brevilin A; the expression levels of fibronectin and connective tissue growth factor were also significantly decreased by brevilin A. The present study indicated that brevilin A has a preventive and therapeutic potential against hepatic fibrosis.

TOPOGRAPHIC CHANGES IN CHOROIDAL THICKNESS IN AGE-RELATED MACULAR DEGENERATION DURING THE DEVELOPMENT OF ACTIVE CHOROIDAL NEOVASCULARIZATION.

PURPOSE: To evaluate topographic changes in choroidal thickness during development of choroidal neovascularization (CNV) in treatment-naive age-related macular degeneration (AMD) and to test the value of such changes as a predictive tool of CNV development. METHODS: This retrospective cohort included 86 eyes that developed CNV from intermediate AMD, 43 eyes with intermediate AMD, and 36 eyes without AMD. Patients with intermediate AMD underwent spectral domain optical coherence tomography using enhanced depth imaging mode every 6 months until CNV was detected. Choroidal neovascularization was localized to one of the subfields of Early Treatment of Diabetic Retinopathy Study grid on fluorescein angiography. Average choroidal thickness of each subfield was calculated. RESULTS: Choroidal thickness of the subfield where CNV developed at first clinical detection significantly increased compared with that 6 months before (P = 0.000 for central, P = 0.001 for superior parafoveal, P = 0.002 for temporal parafoveal, P = 0.002 for inferior parafoveal, and P = 0.001 for nasal parafoveal subfield). In eight patients who visited unexpectedly 3 months before CNV development in central subfield, choroidal thickness of central subfield increased significantly compared with that 6 months before CNV development (P = 0.001). CONCLUSION: Choroidal neovascularization development accompanied choroidal thickening of the corresponding subfield. Regular measurement of choroidal thickness may assist in prediction of CNV.

Effects of tobacco compound 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) on the expression of epigenetically regulated genes in lung carcinogenesis.

Cigarette smoking is a major cause of lung cancer. Although tobacco smoking-induced genotoxicity has been well established, there is apparent lack of abundance functional epigenetic effects reported On cigarette smoke-induced lung carcinogenesis. The aim of this study was to determine effects of intratracheal administration of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) utilizing target gene expression DNA methylation patterns in lung tissues of mice following twice weekly for 8 weeks treatment. An unbiased approach where genomic regions was undertaken to assess early methylation changes within mouse pulmonary tissues. A methylated-CpG island recovery assay (MIRA) was performed to map the DNA methylome in lung tissues, with the position of methylated DNA determined using a Genome Analyzer (MIRA-SEQ). Alterations in epigenetic-regulated target genes were confirmed with quantitative reverse transcription-PCR, which revealed 35 differentially hypermethylated genes including Cdkn1C, Hsf4, Hnf1a, Cdx1, and Hoxa5 and 30 differentially hypomethylated genes including Ddx4, Piwi1, Mdm2, and Pce1 in NNK-exposed lung tissue compared with controls. The main pathway of these genes for mediating biological information was analyzed using the Kyoto Encyclopedia of Genes and Genomes database. Among them, Rssf1 and Mdm2 were closely associated with NNK-induced lung carcinogenesis. Taken together, our data provide valuable resources for detecting cigarette smoke-induced lung carcinogenesis.

Critical issues concerning biocreative strategy in contemporary temporary skeletal anchorage device orthodontics: A narrative review.

Biocreative Orthodontic Strategy (BOS) is designed to establish a physiologically stable occlusion in harmony with masticatory and TMJ function and healthy supporting tissues with strategic use of temporary skeletal anchorage devices (TSADs). This narrative review surveys current research that demonstrates how BOS with TSADs uses a target approach to overcome the limitations experienced with conventional orthodontic treatment. A narrative review article including research on TSADs orthodontics in the permanent dentition. This review is a brief survey of five BOS principles for contemporary TSAD orthodontics: elegant selection of TSADs, bracket prescription to enhance TSAD orthodontics, antero-posterior dimension control, transverse dimension control and airway control issues. Severe malocclusion and craniofacial dysmorphology can be treated with Biocreative Orthodontic Strategy with a minimum number of TSADs. In order to achieve successful treatment outcome using TSADs, it is critical to understand the key diagnosis and treatment principles of BOS and how to develop a target approach for the tooth and bone movement.

Preoperative varus alignment and postoperative meniscus extrusion are the main long-term predictive factors of clinical failure of meniscal root repair.

PURPOSE: No studies have been conducted to determine long-term predictors of clinical failure after surgical root repair. This study identified long-term prognostic factors of clinical failure after pull-out repair of medial meniscus posterior root tears (MMPRTs) at a minimum of 10 year follow-up. METHODS: A total of 37 patients who underwent MMPRT pull-out repair and had been observed for more than 10 years were recruited for this study. The mean follow-up period was 125.9 ± 21.2 months. Clinical failure of the procedures was defined as conversion to total knee arthroplasty (TKA). Participants were categorized into two groups: non-failure and failure groups. Various factors, including demographic features and radiologic findings, were analyzed and compared between the two groups. Meniscus extrusion was assessed at coronal magnetic resonance imaging preoperatively and 1 year postoperatively. Independent risk factors were determined by univariate analysis and logistic regression analysis. To determine the cut-off value for risk factors, the receiver-operating characteristic curve analysis was performed. RESULTS: In total, eight patients (22%) were converted to TKA during the follow-up period. With univariate analysis, statistically significant differences between two groups were observed in mechanical varus alignment (P = 0.018), rate of the number of patient with more meniscal extrusion values after surgery (P = 0.024), and the difference between the preoperative and 1-year postoperative value of meniscus extrusion (mm) (P = 0.010). In a logistic analysis, OR of mechanical varus alignment and differences in meniscus extrusion value before and 1 year after surgery was 1.5 (P = 0.048) and 3.7 (P = 0.034). The cut-off values of mechanical varus alignment and differences in meniscus extrusion values were 5 degrees and 0.7 mm. CONCLUSION: Clinically, preoperative varus alignment and increased meniscal extrusion after surgery were found to be predictive for a clinical failure after meniscal root repair in a long-term perspective. Thus, these negative prognostic factors should be taken into consideration for performing root repair in MMPRTs. LEVEL OF EVIDENCE: Level III.

An increasing trend of the number of meniscus allograft transplantation in Korea.

PURPOSE: Meniscus allograft transplantation (MAT) can be performed to treat symptomatic patients with meniscus-deficient knees. However, the current epidemiologic status of MAT is unknown in many countries, including Korea. This study aimed to investigate the national trends of MAT in Korea which covers MAT procedures by the Korean national health insurance system. METHODS: Information from the national database was acquired through the Korean Health Insurance Review and Assessment Service (HIRA) from 2010 to 2017. All patients encoded as MAT were included. The total number of MATs and their incidence per 100,000 persons were determined, and the results were stratified by age and sex. RESULTS: The total number of MATs and their incidence per 100,000 persons per year were 369 and 0.77, respectively, in 2010, which increased to 826 and 1.72, respectively, in 2017. The number of MATs increased by 124% over 8 years. The peaks for the total number of MATs and their incidence were seen in patients in their 20 s in 2010, but in 2017, the peaks were observed in patients who were in their 40 s. MAT was performed more frequently in males (61%) than in females (39%) over the study period. CONCLUSION: The total number of MATs and their incidence had increased by 124% between 2010 and 2017. The peak treatment age range for MAT changed from 20 years of age in 2010 to 40 years of age in 2017, and MAT was performed more frequently in males than in females. LEVEL OF EVIDENCE: IV.

Analysis of Complication in Mandibular Angle Fracture: Champy Technique Versus Rigid Fixation.

INTRODUCTION: The mandibular angle endures tension and compression during mastication, and proper internal fixation is essential when a fracture occurs. The authors analyzed the complication rate between Champy technique and rigid fixation, used in the treatment of mandibular angle fracture. METHODS: The retrospective study included patients with mandibular angle fracture in single center, from January 2003 to December 2019. The patients were categorized into 2 groups by fixation method of angle fracture: Champy technique which uses single miniplate and rigid fixation which uses multiple miniplate, reconstruction plate, compression plate, lag screw, and wire. Pearson chi-square test was used to analyze the complication rates. RESULTS: A total of 64 patients met inclusion criteria. Thirty-four patients had isolated angle fractures and 30 patients had multiple mandibular fractures. In isolated angle fracture, there were no significant differences in all complications between the Champy technique group and rigid fixation group. In multiple mandibular fractures, there were no significant differences in all complications between 2 groups. CONCLUSIONS: For isolated angle fractures, Champy technique is a reliable treatment method. Additionally, in case of multiple mandibular fractures, Champy technique is an effective fixation method in angle fractures when proper rigid fixation is performed for accompanying fractures.

Effect of Different Surface Designs on the Rotational Resistance and Stability of Orthodontic Miniscrews: A Three-Dimensional Finite Element Study.

High orthodontic forces and various directions of applied forces can be associated with loosening of the screw anchorage in the bone. Screw designs have been modified to increase the stability of the miniscrews. This research evaluates the influence of three-designs on the stability of orthodontic miniscrews. A conventionally cylinder-type miniscrew design (Bio-Action screw, Jin-Biomed co., Bucheon, Korea) was set as a control, and three conditions were studied based on modifications of this control design. Condition-1 has narrowed threads in the upper part of the screw; Condition-2 has a notch at the middle part; and Condition-3 has the combination of Condition-1 and Condition-2. The moment required to unwind the miniscrew to five degrees is tested, and the moment generated at the cortical bone and the trabecular bone were calculated with finite element analysis. Compared to the control, all three conditions showed a higher moment required to unwind the miniscrew and a higher moment generated at the cortical bone. At the trabecular bone, condition-2 and -3 showed higher moment than the control, and condition-1 showed similar moment to the control. Condition-3 required a higher overall moment to unwind the miniscrew. These findings validate the design modifications used to increase the rotational resistance.

Effect of Different Head Hole Position on the Rotational Resistance and Stability of Orthodontic Miniscrews: A Three-Dimensional Finite Element Study.

The orthodontic miniscrew is driven into bone in a clockwise direction. Counter-clockwise rotational force applied to the implanted miniscrew can degrade the stability. The purpose of this three-dimensional finite element study was to figure out the effect of shifting the miniscrew head hole position from the long axis. Two miniscrew models were developed, one with the head hole at the long axis and the other with an eccentric hole position. One degree of counter-clockwise rotation was applied to both groups, and the maximum Von-Mises stress and moment was measured under various wire insertion angles from -60° to +60°. All Von-Mises stress and moments increased with an increase in rotational angle or wire insertion angle. The increasing slope of moment in the eccentric hole group was significantly higher than that in the centric hole group. Although the maximum Von-Mises stress was higher in the eccentric hole group, the distribution of stress was not very different from the centric hole group. As the positive wire insertion angles generated a higher moment under a counter-clockwise rotational force, it is recommended to place the head hole considering the implanting direction of the miniscrew. Clinically, multidirectional and higher forces can be applied to the miniscrew with an eccentric head hole position.

Mealworm Oil (MWO) Enhances Wound Healing Potential through the Activation of Fibroblast and Endothelial Cells.

Mealworm and mealworm oil (MWO) have been reported to affect antioxidant, anti-coagulation, anti-adipogenic and anti-inflammatory activities. However, the function of MWO in wound healing is still unclear. In this study, we found that MWO induced the migration of fibroblast cells and mRNA expressions of wound healing factors such as alpha-smooth muscle actin (α-SMA), collagen-1 (COL-1) and vascular endothelial growth factor (VEGF) in fibroblast cells. The tube formation and migration of endothelial cells were promoted through the activation of VEGF/VEGF receptor-2 (VEGFR-2)-mediated downstream signals including AKT, extracellular signal-regulated kinase (ERK) and p38 by MWO-stimulated fibroblasts for angiogenesis. Moreover, we confirmed that MWO promoted skin wound repair by collagen synthesis, re-epithelialization and angiogenesis in an in vivo excisional wound model. These results demonstrate that MWO might have potential as a therapeutic agent for the treatment of skin wounds.

Finite element analysis of C-expanders with different vertical vectors of anchor screws.

INTRODUCTION: C-expanders are tissue- and bone-borne maxillary expanders that are anchored by 6 orthodontic miniscrews, 3 on each side of the palate. The purpose of the study was to investigate the effect of C-expanders on the circummaxillary sutures and bucco-palatal axis of teeth in 3-dimensional finite element analyses when anchor screw vectors are different. METHODS: Five expansion models were studied on the basis of the vertical positions of anchor screws on the palate. Anchor screws for models A, B, and C were placed symmetrically at 4 mm, 7 mm, and 15 mm below the cementoenamel junction (CEJ), respectively. Anchor screws for models D and E were placed asymmetrically at 4 mm and 15 mm below CEJ and 7 mm and 15 mm below CEJ, respectively. Stress, displacement, and angular changes of the bone and teeth were measured in elastoplastic behavior models using a static-nonlinear simulation in an implicit method. RESULTS: Symmetrical and asymmetrical anchor screw placement with different vertical vectors were compared using finite element analyses on 5 models. CONCLUSIONS: Using different vectors of anchor screws for C-expanders does change the pattern of palatal expansion (null hypothesis was rejected). The current investigation presents a promising future of controlled asymmetric skeletal maxillary expansion when asymmetric maxillary architecture needs to be corrected for successful orthodontic outcomes without involving orthognathic surgeries.