Exploring the potential of the halotolerant bacterial strain Bacillus subtilis LN8B as an ecofriendly sulfide collector for seawater flotation.

AIM: To assess the effectiveness of Bacillus subtilis strain LN8B as a biocollector for recovering pyrite (Py) and chalcopyrite (CPy) in both seawater (Sw) and deionized water (Dw), and to explore the underlying adhesion mechanism in these bioflotation experiments. MATERIALS AND METHODS: The bioflotation test utilized B. subtilis strain LN8B as the biocollector through microflotation experiments. Additionally, frother methyl isobutyl carbinol (MIBC) and conventional collector potassium amyl xanthate (PAX) were introduced in some experiments. The zeta potential (ZP) and Fourier-transform infrared spectroscopy (FTIR) was employed to explore the adhesion mechanism of Py and CPy interacting with the biocollector in Sw and Dw. The adaptability of the B. subtilis strain to different water types and salinities was assessed through growth curves measuring optical density. Finally, antibiotic susceptibility tests were conducted to evaluate potential risks of the biocollector. RESULTS: Superior outcomes were observed in Sw where Py and CPy recovery was ∼39.3% ± 7.7% and 41.1% ± 5.8%, respectively, without microorganisms' presence. However, B. subtilis LN8B potentiate Py and CPy recovery, reaching 72.8% ± 4.9% and 84.6% ± 1.5%, respectively. When MIBC was added, only the Py recovery was improved (89.4% ± 3.6%), depicting an adverse effect for CPy (81.8% ± 1.1%). ZP measurements indicated increased mineral surface hydrophobicity when Py and CPy interacted with the biocollector in both Sw and Dw. FTIR revealed the presence of protein-related amide peaks, highlighting the hydrophobic nature of the bacterium. The adaptability of this strain to diverse water types and salinities was assessed, demonstrating remarkable growth versatility. Antibiotic susceptibility tests indicated that B. subtilis LN8B was susceptible to 23 of the 25 antibiotics examined, suggesting it poses minimal environmental risks. CONCLUSIONS: The study substantiates the biotechnological promise of B. subtilis strain LN8B as an efficient sulfide collector for promoting cleaner mineral production. This effectiveness is attributed to its ability to induce mineral surface hydrophobicity, a result of the distinct characteristics of proteins within its cell wall.

The microbial world in copper sulfide flotation plants (CSFP): Novel insights into bacterial communities and their application as potential pyrite bioreagents.

Operations in copper sulfide flotation plants (CSFP) are complex and governed by several variables such as available technologies, reagents, and environmental conditions. However, few investigations are related to studying the microbial communities. These aspects provide a reason to compare the bacterial communities of two CSFP operated with freshwater (FwFlo) and seawater (SwFlo), and study whether indigenous bacteria could be used as pyrite bioreagents. Analyses were determined through next-generation sequencing by Illumina MiSeq System and conducted throughout the entire process: (i) minerals before and after grinding; (ii) final concentrate and concentrate thickener overflow; (iii) final tailings and tailings thickener overflow; and (iv) intake water. Bacterial strains from both plants were tested as potential bioreagents, given their tendency to adhere to pyrite after 5 min. In both CSFP, Proteobacteria (relative abundance from 45.48% to 79.22%), followed by Bacteroidetes (9.37%-44.7%), were the most abundant phyla. Regarding species, Algoriphagus olei (11.35%-43.52%) was present exclusively in FwFlo samples in contact with process water and absent in the mineral before grinding, where Cupriavidus metallidurans (16.05%) and Pseudomonas_uc (11.79%) predominated. In SwFlo samples, Marinobacter flavimaris (3.47%-41.1%), and GU061212-s (10.92%-27.63%), were the most abundant microorganisms. All of them were also detected in intake seawater. The strains with the highest adhesion rate (from 29.84% ± 0.14-100%) were phylogenetically identified as species of the genera Marinobacter, Pseudomonas, Idiomarina, Halomonas, Bacillus, Aerocuccus, and Peribacillus. Our results reveal that bacterial communities are critically dependent on process waters during mining activities, and our data depicted that indigenous bacteria could be used as potential pyrite bioreagents, evidenced by a high adhesion rate. It is thus possible to propose that different indigenous bacterial strains could be considered as new bioreagents to reduce the impact of conventional flotation reagents on health from an environment friendly perspective.

Feasibility of re-processing mine tailings to obtain critical raw materials using real options analysis.

The re-processing of mine tailings to obtain critical raw materials (CRMs) could reduce the mining of new deposits as well as ensure the profitable use of the waste materials. Though, it requires large scale industrial installations and the development of specialized technologies to obtain CRMs. New investment in mining activities is an operation, engaging for considerable financial resources involved. The scale of such an endeavor makes a new mining activity a high-risk operation due to several uncertainties present. Therefore, there is an acute need to use new tools to assess the risk associated with the planning and development of new mining activities. This study introduces a framework to evaluate the economic risk related to the re-processing of mine tailings to obtain CRMs. The framework, based on real options analysis (ROA), and sensitivity and uncertainty analysis, was applied to analyze the profitability of using mine tailings as a source of CRMs in the Chilean mining industry. The novelty of this approach consists in enabling the investment decision making including the uncertainties related to a novel investment mining project. RESULTS: show that tailing storage facilities in Chile have some stocks of CRMs, like scandium, whose extraction could be profitable. For the data used, the results of uncertainty and sensitivity analyses show that capital expenditure has a more significant influence than the other variables. Therefore, for the case of mine tailings re-processing, it is essential to develop processes and technologies that enable lower capital expenses.

MICP mediated by indigenous bacteria isolated from tailings for biocementation for reduction of wind erosion.

In this study, native ureolytic bacteria were isolated from copper tailings soils to perform microbial-induced carbonate precipitation (MICP) tests and evaluate their potential for biocement formation and their contribution to reduce the dispersion of particulate matter into the environment from tailings containing potentially toxic elements. It was possible to isolate a total of 46 bacteria; among them only three showed ureolytic activity: Priestia megaterium T130-1, Paenibacillus sp. T130-13 and Staphylococcus sp. T130-14. Biocement cores were made by mixing tailings with the isolated bacteria in presence of urea, resulting similar to those obtained with Sporosarcina pasteurii and Bacillus subtilis used as positive control. Indeed, XRD analysis conducted on biocement showed the presence of microcline (B. subtilis 17%; P. megaterium 11. 9%), clinochlore (S. pasteurii, 6.9%) and magnesiumhornblende (Paenibacillus sp. 17.8%; P. megaterium 14.6%); all these compounds were not initially present in the tailings soils. Moreover the presence of calcite (control 0.828%; Paenibacillus sp. 5.4%) and hematite (control 0.989%; B. subtilis 6.4%) was also significant unlike the untreated control. The development of biofilms containing abundant amount of Ca, C, and O on microscopic soil particles was evidenced by means of FE-SEM-EDX and XRD. Wind tunnel tests were carried out to investigate the resistance of biocement samples, accounted for a mass loss five holds lower than the control, i.e., the rate of wind erosion in the control corresponded to 82 g/m2h while for the biocement treated with Paenibacillus sp. it corresponded to only 16.371 g/m2h. Finally, in compression tests, the biocement samples prepared with P. megaterium (28.578 psi) and Paenibacillus sp. (28.404 psi) showed values similar to those obtained with S. pasteurii (27.102 psi), but significantly higher if compared to the control (15.427 psi), thus improving the compression resistance capacity of the samples by 85.2% and 84.1% with respect to the control. According to the results obtained, the biocement samples generated with the native strains showed improvements in the mechanical properties of the soil supporting them as potential candidates in applications for the stabilization of mining liabilities in open environments using bioaugmentation strategies with native strains isolated from the same mine tailing.

Optimization of the SAG Grinding Process Using Statistical Analysis and Machine Learning: A Case Study of the Chilean Copper Mining Industry.

Considering the continuous increase in production costs and resource optimization, more than a strategic objective has become imperative in the copper mining industry. In the search to improve the efficiency in the use of resources, the present work develops models of a semi-autogenous grinding (SAG) mill using statistical analysis and machine learning (ML) techniques (regression, decision trees, and artificial neural networks). The hypotheses studied aim to improve the process's productive indicators, such as production and energy consumption. The simulation of the digital model captures an increase in production of 4.42% as a function of mineral fragmentation, while there is potential to increase production by decreasing the mill rotational speed, which has a decrease in energy consumption of 7.62% for all linear age configurations. Considering the performance of machine learning in the adjustment of complex models such as SAG grinding, the application of these tools in the mineral processing industry has the potential to increase the efficiency of these processes, either by improving production indicators or by saving energy consumption. Finally, the incorporation of these techniques in the aggregate management of processes such as the Mine to Mill paradigm, or the development of models that consider the uncertainty of the explanatory variables, could further increase the performance of productive indicators at the industrial scale.

Impact of seawater desalination and wastewater treatment on water stress levels and greenhouse gas emissions: The case of Chile.

Many regions around the world are suffering from water stress, and desalinated water and recycled water are seen as alternatives for meeting the water demand. However, high energy consumption and associated greenhouse gas emissions are some of the main environmental impacts. This is notable for many arid and semi-arid countries where desalination and water recycling are considered options for ensuring water resources availability. This research presents the incorporation of the quantification of greenhouse gas emissions generated during the operation of desalination and wastewater treatment plants in the assessment of water stress levels using the water stress indicator adopted by the 2030 Agenda for Sustainable Development. Chile was chosen as a case study, as it is a country where there is a considerable difference between the availability of conventional water sources and the water demand, and the electrical grid is fed mainly by fossil fuels. The methodology proposed allows calculating the indirect greenhouse gas emissions due to electrical consumption for the operation of desalination and wastewater treatment plants, and the direct greenhouse gas emissions coming from biological processes used in wastewater treatment plants. The results showed that Chilean arid climate zones will not experience water stress in the future at the regional level, mainly because of the installation of several desalination plants by 2030. Meanwhile, recycled water from the urban sector will slightly contribute to the reduction in the level of water stress in almost all Chilean regions by 2030. Moreover, desalination and wastewater treatment plant will contribute only between 0.34% and 0.75% of total greenhouse gas emitted in Chile by 2030. Therefore, the operation of these industrial systems for facing water scarcity problems in northern and central zones of Chile is a suitable alternative because it does not generate large environmental problems.

Bioprospecting of Ureolytic Bacteria From Laguna Salada for Biomineralization Applications.

The processes of biomineralization, mediated by ureolytic bacteria, possess a wide range of technological applications, such as the formation of biocements and remediation of water and soil environments. For this reason, the bioprospecting of new ureolytic bacteria is interesting for its application to these technologies, particularly for water treatment. This study demonstrates the isolation, selection, and identification of halotolerant ureolytic bacteria from Laguna Salada (inland from Atacama Desert) and the evaluation of their ability to precipitate calcium carbonate crystals in freshwater in the presence of calcium ions, as well as the ability to induce the precipitation of crystals from different ions present in seawater. Twenty-four halotolerant ureolytic bacteria whose molecular identification gives between 99 and 100% identity with species of the genus Bacillus, Porphyrobacter, Pseudomonas, Salinivibrio, and Halomonas were isolated. When cultivated in freshwater, urea, and calcium chloride, all species are able to biomineralize calcium carbonate in different concentrations. In seawater, the strains that biomineralize the highest concentration of calcium carbonate correspond to Bacillus subtilis and Halomonas sp. SEM-EDX and XRD analyses determined that both bacteria induce the formation of 9-33% halite (NaCl), 31-66% monohydrocalcite (CaCO3 × H2O), and 24-27% struvite (MgNH4PO4 × 6H2O). Additionally, B.subtilis induces the formation of 7% anhydrite (CaSO4). In seawater, B.subtilis and Halomonas sp. were able to precipitate both calcium (96-97%) and magnesium (63-67%) ions over 14 days of testing. Ion removal assays with B.subtilis immobilized in beads indicate a direct relationship between the urea concentration and a greater removal of ions with similar rates to free cells. These results demonstrate that the biomineralization mediated by bacterial urea hydrolysis is feasible in both freshwater and seawater, and we propose its application as a new technology in improving water quality for industrial uses.