Investigating interfacial electron transfer in dye-sensitized NiO using vibrational spectroscopy.

Understanding what influences the formation and lifetime of charge-separated states is key to developing photoelectrochemical devices. This paper describes the use of time-resolved infrared absorption spectroscopy (TRIR) to determine the structure and lifetime of the intermediates formed on photoexcitation of two organic donor-π-acceptor dyes adsorbed to the surface of NiO. The donor and π-linker of both dyes is triphenylamine and thiophene but the acceptors differ, maleonitrile (1) and bodipy (2). Despite their structural similarities, dye 1 outperforms 2 significantly in devices. Strong transient bands in the fingerprint region (1 and 2) and nitrile region (2300-2000 cm-1) for 1 enabled us to monitor the structure of the excited states in solution or adsorbed on NiO (in the absence and presence of electrolyte) and the corresponding kinetics, which are on a ps-ns timescale. The results are consistent with rapid (<1 ps) charge-transfer from NiO to the excited dye (1) to give exclusively the charge-separated state on the timescale of our measurements. Conversely, the TRIR experiments revealed that multiple species are present shortly after excitation of the bodipy chromophore in 2, which is electronically decoupled from the thiophene linker. In solution, excitation first populates the bodipy singlet excited state, followed by charge transfer from the triphenylamine to the bodipy. The presence and short lifetime (τ ≈ 30 ps) of the charge-transfer excited state when 2 is adsorbed on NiO (2|NiO) suggests that charge separation is slower and/or less efficient in 2|NiO than in 1|NiO. This is consistent with the difference in performance between the two dyes in dye-sensitized solar cells and photoelectrochemical water splitting devices. Compared to n-type materials such as TiO2, less is understood regarding electron transfer between dyes and p-type metal oxides such as NiO, but it is evident that fast charge-recombination presents a limit to the performance of photocathodes. This is also a major challenge to photocatalytic systems based on a "Z-scheme", where the catalysis takes place on a µs-s timescale.

A comprehensive comparison of dye-sensitized NiO photocathodes for solar energy conversion.

We investigated a range of different mesoporous NiO electrodes prepared by different research groups and private firms in Europe to determine the parameters which influence good quality photoelectrochemical devices. This benchmarking study aims to solve some of the discrepancies in the literature regarding the performance of p-DSCs due to differences in the quality of the device fabrication. The information obtained will lay the foundation for future photocatalytic systems based on sensitized NiO so that new dyes and catalysts can be tested with a standardized material. The textural and electrochemical properties of the semiconducting material are key to the performance of photocathodes. We found that both commercial and non-commercial NiO gave promising solar cell and water-splitting devices. The NiO samples which had the two highest solar cell efficiency (0.145% and 0.089%) also gave the best overall theoretical H2 conversion.

Nature of Excited States of Ruthenium-Based Solar Cell Dyes in Solution: A Comprehensive Spectroscopic Study.

The photophysical properties of a number of ruthenium complexes of the general structure [Ru(L1)(L2)(NCS)2], related to the prominent solar cell dye [Ru(dcb)2(NCS)2] (dcb = 4,4'-dicarboxylato-2,2'-bipyridine) are investigated. For L1 = dcb and dmb (dmb = 4,4'-dimethyl-2,2'-bipyridine), several variations of L2 show very little difference in the lowest energy absorption peak. Resonance Raman and density functional theory calculations have been used to assign the corresponding transitions as {Ru(NCS)2} → dcb with significant contributions of the NCS ligands. Transient absorption, time-resolved infrared, and transient resonance Raman spectroscopic techniques were used to probe the photophysics of the complexes and relatively short-lived {Ru(NCS)2} → dcb/dpb (dpb = 4,4'-diphenylethenyl-2,2'-bipyridine) excited states were observed with the exception of [Ru(dcb)(dab)(NCS)2] (dab = 4,4'-dianthracenethenyl-2,2'-bipyridine), which showed a long-lived excited state assigned as ligand centered charge separated.

Intraligand charge-transfer excited states in Re(I) complexes with donor-substituted dipyridophenazine ligands.

The donor-acceptor ligands 11-(4-diphenylaminophenyl)dipyrido[3,2-a:2',3'-c]phenazine (dppz-PhNPh2) and 11-(4-dimethylaminophenyl)dipyrido[3,2-a:2',3'-c]phenazine (dppz-PhNMe2), and their rhenium complexes, [Re(CO)3X] (X = Cl(-), py, 4-dimethylaminopyridine (dmap)), are reported. Crystal structures of the two ligands were obtained. The optical properties of the ligands and complexes are dominated by intraligand charge transfer (ILCT) transitions from the amine to the dppz moieties with λabs = 463 nm (ε = 13 100 M(-1) cm(-1)) for dppz-PhNMe2 and with λabs = 457 nm (ε = 16 900 M(-1) cm(-1)) for dppz-PhNPh2. This assignment is supported by CAM-B3LYP TD-DFT calculations. These ligands are strongly emissive in organic solvents and, consistent with the ILCT character, show strong solvatochromic behavior. Lippert-Mataga plots of the data are linear and yield Δµ values of 22 D for dppz-PhNPh2 and 20 D for dppz-PhNMe2. The rhenium(I) complexes are less emissive, and it is possible to measure resonance Raman spectra. These data show relative band intensities that are virtually unchanged from λexc = 351 to 532 nm, consistent with a single dominant transition in the visible region. Resonance Raman excitation profiles are solvent sensitive; these data are modeled using wavepacket theory yielding reorganization energies ranging from 1800 cm(-1) in toluene to 6900 cm(-1) in CH3CN. The excited state electronic absorption and infrared spectroscopy reveal the presence of dark excited states with nanosecond to microsecond lifetimes that are sensitive to the ancillary ligand on the rhenium. These dark states were assigned as phenazine-based (3)ILCT states by time-resolved infrared spectroscopy. Time-resolved infrared spectroscopy shows transient features in which Δν(CO) is approximately -7 cm(-1), consistent with a ligand-centered excited state. Evidence for two such states is seen in mid-infrared transient spectra.

Complete family of mono-, bi-, and trinuclear Re(I)(CO)3Cl complexes of the bridging polypyridyl ligand 2,3,8,9,14,15-hexamethyl-5,6,11,12,17,18-hexaazatrinapthalene: syn/anti isomer separation, characterization, and photophysics.

The syn and anti isomers of the bi- and trinuclear Re(CO)(3)Cl complexes of 2,3,8,9,14,15-hexamethyl-5,6,11,12,17,18-hexaazatrinapthalene (HATN-Me(6)) are reported. The isomers are characterized by (1)H NMR spectroscopy and X-ray crystallography. The formation of the binuclear complex from the reaction of HATN-Me(6) with 2 equiv of Re(CO)(5)Cl in chloroform results in a 1:1 ratio of the syn and anti isomers. However, synthesis of the trinuclear complex from the reaction of HATN-Me(6) with 3 equiv of Re(CO)(5)Cl in chloroform produces only the anti isomer. syn-{(Re(CO)(3)Cl)(3)(µ-HATN-Me(6))} can be synthesized by reacting 1 equiv of Re(CO)(5)Cl with syn-{(Re(CO)(3)Cl)(2)(µ-HATN-Me(6))} in refluxing toluene. The product is isolated by subsequent chromatography. The X-ray crystal structures of syn-{(Re(CO)(3)Cl)(2)(µ-HATN-Me(6))} and anti-{(Re(CO)(3)Cl)(3)(µ-HATN-Me(6))} are presented both showing severe distortions of the HATN ligand unit and intermolecular π stacking. The complexes show intense absorptions in the visible region, comprising strong π → π* and metal-to-ligand charge-transfer (MLCT) transitions, which are modeled using time-dependent density functional theory (TD-DFT). The energy of the MLCT absorption decreases from mono- to bi- to trinuclear complexes. The first reduction potentials of the complexes become more positive upon binding of subsequent Re(CO)(3)Cl fragments, consistent with changes in the energy of the MLCT bands and lowering of the energy of relevant lowest unoccupied molecular orbitals, and this is supported by TD-DFT. The nature of the excited states of all of the complexes is also studied using both resonance Raman and picosecond time-resolved IR spectroscopy, where it is shown that MLCT excitation results in the oxidation of one rhenium center. The patterns of the shifts in the carbonyl bands upon excitation reveal that the MLCT state is localized on one rhenium center on the IR time scale.

Continuous Photo-Oxidation in a Vortex Reactor: Efficient Operations Using Air Drawn from the Laboratory.

We report the construction and use of a vortex reactor which uses a rapidly rotating cylinder to generate Taylor vortices for continuous flow thermal and photochemical reactions. The reactor is designed to operate under conditions required for vortex generation. The flow pattern of the vortices has been represented using computational fluid dynamics, and the presence of the vortices can be easily visualized by observing streams of bubbles within the reactor. This approach presents certain advantages for reactions with added gases. For reactions with oxygen, the reactor offers an alternative to traditional setups as it efficiently draws in air from the lab without the need specifically to pressurize with oxygen. The rapid mixing generated by the vortices enables rapid mass transfer between the gas and the liquid phases allowing for a high efficiency dissolution of gases. The reactor has been applied to several photochemical reactions involving singlet oxygen (1O2) including the photo-oxidations of α-terpinene and furfuryl alcohol and the photodeborylation of phenyl boronic acid. The rotation speed of the cylinder proved to be key for reaction efficiency, and in the operation we found that the uptake of air was highest at 4000 rpm. The reactor has also been successfully applied to the synthesis of artemisinin, a potent antimalarial compound; and this three-step synthesis involving a Schenk-ene reaction with 1O2, Hock cleavage with H+, and an oxidative cyclization cascade with triplet oxygen (3O2), from dihydroartemisinic acid was carried out as a single process in the vortex reactor.

Can aliphatic anchoring groups be utilised with dyes for p-type dye sensitized solar cells?

A series of novel laterally anchoring tetrahydroquinoline derivatives have been synthesized and investigated for their use in NiO-based p-type dye-sensitized solar cells. The kinetics of charge injection and recombination at the NiO-dye interface for these dyes have been thoroughly investigated using picosecond transient absorption and time-resolved infrared measurements. It was revealed that despite the anchoring unit being electronically decoupled from the dye structure, charge injection occurred on a sub picosecond timescale. However, rapid recombination was also observed due to the close proximity of the electron acceptor on the dyes to the NiO surface, ultimately limiting the performance of the p-DSCs.