Structural insights into the interactions of glutathione transferases with a nitric oxide carrier and sodium nitroprusside.

Glutathione transferases are detoxification enzymes with multifaceted roles, including a role in the metabolism and scavenging of nitric oxide (NO) compounds in cells. Here, we explored the ability of Trametes versicolor glutathione transferases (GSTs) from the Omega class (TvGSTOs) to bind metal-nitrosyl compounds. TvGSTOs have been studied previously for their ligandin role and are interesting models to study protein‒ligand interactions. First, we determined the X-ray structure of the TvGSTO3S isoform bound to the dinitrosyl glutathionyl iron complex (DNGIC), a physiological compound involved in the storage of nitric oxide. Our results suggested a different binding mode compared to the one previously described in human GST Pi 1 (GSTP1). Then, we investigated the manner in which TvGSTO3S binds three nonphysiological metal-nitrosyl compounds with different metal cores (iron, ruthenium and osmium). We assayed sodium nitroprusside, a well-studied vasodilator used in cases of hypertensive crises or heart failure. Our results showed that the tested GST can bind metal-nitrosyls at two distinct binding sites. Thermal shift analysis with six isoforms of TvGSTOs identified TvGSTO6S as the best interactant. Using the Griess method, TvGSTO6S was found to improve the release of nitric oxide from sodium nitroprusside in vitro, whereas the effects of human GST alpha 1 (GSTA1) and GSTP1 were moderate. Our results open new structural perspectives for understanding the interactions of glutathione transferases with metal-nitrosyl compounds associated with the biochemical mechanisms of NO uptake/release in biological systems.

Increased Range of Catalytic Activities of Immobilized Compared to Colloidal Gold Nanoparticles.

Gold nanoparticles (AuNPs) can be described as nanozymes, species that are able to mimic the catalytic activities of several enzymes, such as oxidase/peroxidase, reductase, or catalase. Most studies in the literature focus on the colloidal suspension of AuNPs, and it is obvious that their immobilization could open the doors to new applications thanks to their increased stability in this state. This work aimed to investigate the behavior of surfaces covered by immobilized AuNPs (iAuNPs). Citrate-stabilized AuNPs (AuNPs-cit) were synthesized and immobilized on glass slides using a simple dip coating method. The resulting iAuNPs were characterized (surface plasmon resonance, microscopy, quantification of immobilized AuNPs), and their multi-enzymatic-like activities (oxidase-, peroxidase-, and catalase-like activity) were evaluated. The comparison of their activities versus AuNPs-cit highlighted their added value, especially the preservation of their activity in some reaction media, and their ease of reuse. The huge potential of iAuNPs for heterogeneous catalysis was then applied to the degradation of two model molecules of hospital pollutants: metronidazole and methylene blue.

Taylor dispersion analysis of metallic-based nanoparticles - A short review.

Taylor dispersion analysis (TDA) is an interesting tool for nanoparticle (NP) size determination, feasible using simple capillary electrophoresis apparatus. Based upon the radial diffusion of analytes upon a laminar stream, the diffusion coefficient of species is easily estimable. Moreover, TDA is generally more adequate than conventional dynamic light scattering methodologies as it is less dependent on the polydispersity of the sample, leading to accurate measurement and reliable results. This review provides every paper mentioning the use of TDA for metallic-based NPs size determination. Diverse strategies for the detection of metallic NPs (like UV-visible and inductively coupled plasma-mass spectrometry - ICP-MS - for instance) and interpretation of the Taylorgrams are discussed. Based upon the literature, advices on future prospects are also indicated, especially for the comparison of TDA results with other classical techniques.

Room-temperature growth of covalent organic frameworks as the stationary phase for open-tubular capillary electrochromatography.

Covalent organic frameworks (COFs) are a class of porous materials with high surface area, high porosity, good stability and tunable structure that have been widely used in the separation area. In this work, we have proposed the in situ synthesis of a novel COF composed of 4,4',4''-(1,3,5-triazine-2,4,6-triyl)trianiline (Tz) and 1,4-dihydroxyterephthalaldehyde (Da) onto the capillary inner surface for electrochromatographic separation. Fourier transform infrared (FT-IR) spectroscopy, elemental analysis (EA) and scanning electron microscopy (SEM) have facilitated the characterization of the prepared capillary columns. The COF (TzDa) modified OT-CEC column exhibited satisfactory separation selectivity towards neutral compounds (such as chlorobenzenes and alkylbenzenes), acidic and basic compounds (such as phenols and anilines), food additives (vanillin and its analogues) and small biomolecules (such as amino acids and polypeptides). Furthermore, the TzDa modified capillary was quite stable and reproducible. The relative standard deviations for retention times of the test analytes (alkylbenzenes) were as follows: for intra-day (n = 3) runs (≤1.74%), inter-day (n = 3) runs (≤2.25%) and between columns (n = 3) (≤4.83%). This new type of COF-based stationary phase has tremendous potential in separation science.

Analytical strategy for studying the formation and stability of multilayered films containing gold nanoparticles.

The design of layer-by-layer (LbL) polyelectrolyte films including nanoparticles is a growing field of innovation in a wide range of biomedical applications. Gold nanoparticles (AuNPs) are very attractive for further biomolecule coupling to induce a pharmacological effect. Nanostructured LbL films coupled with such metallic species show properties that depend on the conditions of construction, i.e. the polymer nature and dissolution buffer. Tripartite LbL films (polycation, AuNP, and polyanion) were evaluated using two different polycationic polymers (poly(allylamine hydrochloride) (PAH), poly(ethylene imine) (PEI)) and various medium conditions (salts, i.e. phosphate, Tris or Tris-NaCl buffers, and concentration). AuNP incorporation and film stability were analysed by visible spectrophotometry, capillary zone electrophoresis, a quartz crystal microbalance, and high-performance liquid chromatography. The ideal compromise between AuNP loading and film stability was obtained using PAH prepared in Tris-NaCl buffer (0.01-0.15 M). This condition allowed the formation of a LbL film that was more stable than the film with PEI and provided an AuNP quantity that was 4.8 times greater than that of the PAH-PBS-built film. In conclusion, this work presents an analytical strategy for the characterization of nanostructured multilayer films and optimization of LbL films enriched with AuNPs to design biomedical device coatings.

The Impact of Multiple Functional Layers in the Structure of Magnetic Nanoparticles and Their Influence on Albumin Interaction.

In nanomedicine, hybrid nanomaterials stand out for providing new insights in both the diagnosis and treatment of several diseases. Once administered, engineered nanoparticles (NPs) interact with biological molecules, and the nature of this interaction might directly interfere with the biological fate and action of the NPs. In this work, we synthesized a hybrid magnetic nanostructure, with antibacterial and antitumoral potential applications, composed of a magnetite core covered by silver NPs, and coated with a modified chitosan polymer. As magnetite NPs readily oxidize to maghemite, we investigated the structural properties of the NPs after addition of the two successive layers using Mössbauer spectroscopy. Then, the structural characteristics of the NPs were correlated to their interaction with albumin, the major blood protein, to evidence the consequences of its binding on NP properties and protein retention. Thermodynamic parameters of the NPs-albumin interaction were determined. We observed that the more stable NPs (coated with modified chitosan) present a lower affinity for albumin in comparison to pure magnetite and magnetite/silver hybrid NPs. Surface properties were key players at the NP-biological interface. To the best of our knowledge, this is the first study that demonstrates a correlation between the structural properties of complex hybrid NPs and their interaction with albumin.

In vivo and in silico evaluation of a new nitric oxide donor, S,S'-dinitrosobucillamine.

PURPOSE: In a previous work, we have synthetized a new dinitrosothiol, i.e. S,S'-dinitrosobucillamine BUC(NO)2 combining S-nitroso-N-acetylpenicillamine (SNAP) and S-nitroso-N-acetylcysteine (NACNO) in its structure. When exposed to isolated aorta, we observed a 1.5-fold increase of •NO content and a more potent vasorelaxation (1 log higher pD2) compared to NACNO and SNAP alone or combined (Dahboul et al., 2014). In the present study, we analyzed the thermodynamics and kinetics for the release of •NO through computational modeling techniques and correlated it to plasma assays. Then BUC(NO)2 was administered in vivo to rats, assuming it will induce higher and/or longer hypotensive effects than its two constitutive S-mononitrosothiols. METHODS: Free energies for the release of •NO entities have been computed at the density functional theory level assuming an implicit model for the aqueous environment. Degradation products of BUC(NO)2 were evaluated in vitro under heating and oxidizing conditions using HPLC coupled with tandem mass spectrometry (MS/MS). Plasma from rats were spiked with RSNO and kinetics of RSNO degradation was measured using the classical Griess-Saville method. Blood pressure was measured in awake male Wistar rats using telemetry (n = 5, each as its own control, 48 h wash-out periods between subcutaneous injections under transient isoflurane anesthesia, random order: 7 mL/kg vehicle, 3.5, 7, 14 µmol/kg SNAP, NACNO, BUC(NO)2 and an equimolar mixture of SNAP + NACNO in order to mimic the number of •NO contained in BUC(NO)2). Variations of mean (ΔMAP, reflecting arterial dilation) and pulse arterial pressures (ΔPAP, indirectly reflecting venodilation, used to determine effect duration) vs. baseline were recorded for 4 h. RESULTS: Computational modeling highlights the fact that the release of the first •NO radical in BUC(NO)2 requires a free energy which is intermediate between the values obtained for SNAP and NACNO. However, the release of the second •NO radical is significantly favored by the concerted formation of an intramolecular disulfide bond. The corresponding oxidized compound was also characterized as related substance obtained under degradation conditions. The in vitro degradation rate of BUC(NO)2 was significantly greater than for the other RSNO. For equivalent low and medium •NO-load, BUC(NO)2 produced a hypotension identical to NACNO, SNAP and the equimolar mixture of SNAP + NACNO, but its effect was greater at higher doses (-62 ± 8 and -47 ± 14 mmHg, maximum ΔMAP for BUC(NO)2 and SNAP + NACNO, respectively). Its duration of effect on PAP (-50%) lasted from 35 to 95 min, i.e. shorter than for the other RSNO (from 90 to 135 min for the mixture SNAP + NACNO). CONCLUSION: A faster metabolism explains the abilities of BUC(NO)2 to release higher amounts of •NO and to induce larger hypotension but shorter-lasting effects than those induced by the SNAP + NACNO mixture, despite an equivalent •NO-load.

Capillary electrophoresis for fast detection of heterogeneous population in colistin-resistant Gram-negative bacteria.

It has been shown that diverse strains of bacteria can be separated according to their characteristic surface properties by means of CE. We employed here this analytical technique to the study of colistin-resistance in Gram-negative bacteria, which involves the selection of mutants with modified outer membrane composition resulting in changes of surface cell properties. In the same way as with molecular entities, we performed firstly the validation of an ITP-based CE method for three common pathogenic Gram-negative bacteria namely Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae. Secondly, we compared the electrophoretic profiles of bacterial samples from a colistin-susceptible clinical isolate of K. pneumoniae and from the corresponding colistin-resistant derivative. By a simple CE run taking a few minutes, the coexistence of several bacterial subpopulations in the colistin-resistant derivative was clearly evidenced. This work encourages further research that would allow applications of CE in clinical laboratory for a daily monitoring of bacterial population in cared patients when "last-chance" colistin treatment is initiated against multidrug-resistant bacteria.

Cross-frontal mode: An alternative methodology for Taylor dispersion analysis of monomodal sample.

Taylor dispersion analysis (TDA) is a technique dedicated to the determination of the molecular diffusion coefficient (D) of species, using band broadening of an analyte in a laminar flow. Two modes are commonly used to perform TDA: pulse and frontal modes. In each case, a fitting of the signal is required. We propose here a third mode denoted as cross-frontal mode, combining two crossed sample fronts without modification of a classical CE device for the rapid and accurate determination of D of caffeine, reduced glutathione (GSH), insulin from bovine pancreas, bovine serum albumin (BSA) and citrate-capped gold nanoparticles (AuNP). Theoretical aspects and methodology are described, showing a good correlation between the so-called cross-frontal mode and usual frontal mode. Limitations of the techniques are also assessed, and are similar to regular modes while no fitting is required. This new methodology allows improving the sensitivity toward low concentrated sample compared to pulse mode, and an alternative mathematical treatment compared to regular TDA modes.

Unraveling the potential of breath and sweat VOC capture devices for human disease detection: a systematic-like review of canine olfaction and GC-MS analysis.

The development of disease screening methods using biomedical detection dogs relies on the collection and analysis of body odors, particularly volatile organic compounds (VOCs) present in body fluids. To capture and analyze odors produced by the human body, numerous protocols and materials are used in forensics or medical studies. This paper provides an overview of sampling devices used to collect VOCs from sweat and exhaled air, for medical diagnostic purposes using canine olfaction and/or Gas Chromatography-Mass spectrometry (GC-MS). Canine olfaction and GC-MS are regarded as complementary tools, holding immense promise for detecting cancers and infectious diseases. However, existing literature lacks guidelines for selecting materials suitable for both canine olfaction and GC-MS. Hence, this review aims to address this gap and pave the way for efficient body odor sampling materials. The first section of the paper describes the materials utilized in training sniffing dogs, while the second section delves into the details of sampling devices and extraction techniques employed for exhaled air and sweat analysis using GC-MS. Finally, the paper proposes the development of an ideal sampling device tailored for detection purposes in the field of odorology. By bridging the knowledge gap, this study seeks to advance disease detection methodologies, harnessing the unique abilities of both dogs and GC-MS analysis in biomedical research.

Intramolecular interactions versus hydration effects on p-guanidinoethyl-phenol structure and pKa values.

We analyze the structure, hydration, and pK(a) values of p-guanidinoethyl-phenol through a combined experimental and theoretical study. These issues are relevant to understand the mechanism of action of the tetrameric form, the antibacterial compound tetra-p-guanidinoethyl-calix[4]arene (Cx1). The investigated system can also be useful to model other pharmaceutical drugs bearing a guanidine function in the vicinity of an ionizable group and the effect of arginine on the pK(a) of vicinal ionizable residues (in particular tyrosine) in peptides. The p-guanidinoethyl-phenol monomer (mCx1) has two ionizable groups. One important particularity of this system is that it exhibits high molecular flexibility that potentially leads to enhanced stabilization in folded structures by direct, strong Coulombic interactions between the ionizable groups. The first pK(a) corresponding to ionization of the -OH group has experimentally been shown to be only slightly different from usual values in substituted phenols. However, because of short-range Coulombic interactions, the role of intramolecular interactions and solvation effects on the acidities of this compound is expected to be important and it has been analyzed here on the basis of theoretical calculations. We use a discrete-continuum solvation model together with quantum-mechanical calculations at the B3LYP level of theory and the extended 6-311+G(2df,2p) basis set. Both intra- and intermolecular effects are very large (~70 kcal/mol) but exhibit an almost perfect compensation, thus explaining that the actual pK(a) of mCx1 is close to free phenol. The same compensation of environmental effects applies to the second pK(a) that concerns the guanidinium group. Such a pK(a) could not be determined experimentally with standard titration techniques and in fact the theoretical study predicts a value of 14.2, that is, one unit above the pK(a) of the parent ethyl-guanidinium molecule.

Food-inspired innovations to improve the stability of active pharmaceutical ingredients.

Food-processing and pharmaceutical industries share a lot of stability issues against the same physical, chemical, and microbiological phenomena. They also share some solutions to improve the stability as the use of preservatives and packaging. Ecological concerns lead to the development of tremendous innovations in food. Some of these innovations could also be beneficial in the pharmaceutical domain. The objective of this review is to evaluate the potential application of these findings in the pharmaceutical field and the main limits in terms of toxicity, environmental, economic and regulatory issues. The principal factors influencing the shelf-life were highlighted through the description of the stability studies usually performed in the pharmaceutical industry (according to European guidelines). To counter those factors, different solutions are currently available as preservatives and specific packaging. They were described and debated with an overview of recent food innovations in each field. The limits of the current solutions in the pharmaceutical field and the innovation in the food field have inspired a critical pharmaceutical outlook. The active and intelligent packaging for active pharmaceutical ingredients of the future is imagined.

Physicochemical degradation of phycocyanin and means to improve its stability: A short review.

The cyanobacterium Arthrospira platensis, spirulina, is a source of pigments such as phycobiliprotein and phycocyanin. Phycocyanin is used in the food, cosmetics, and pharmaceutical industries because of its antioxidant, anti-inflammatory, and anticancer properties. The different steps involved in extraction and purification of this protein can alter the final properties. In this review, the stability of phycocyanin (pH, temperature, and light) is discussed, considering the physicochemical parameters of kinetic modeling. The optimal working pH range for phycocyanin is between 5.5 and 6.0 and it remains stable up to 45 °C; however, exposure to relatively high temperatures or acidic pH decreases its half-life and increases the degradation kinetic constant. Phycobiliproteins are sensitive to light; preservatives such as mono- and di-saccharides, citric acid, or sodium chloride appear to be effective stabilizing agents. Encapsulation within nano- or micro-structured materials such as nanofibers, microparticles, or nanoparticles, can also preserve or enhance its stability.

Nitric Oxide Delivering Surfaces: An Overview of Functionalization Strategies and Efficiency Progress.

An overview on the design of nitric oxide (NO) delivering surfaces for biomedical purposes is provided, with a focus on the advances of the past 5 years. A localized supply of NO is of a particular interest due to the pleiotropic biological effects of this diatomic compound. Depending on the generated NO flux, the surface can mimic a physiological release profile to provide an activity on the vascular endothelium or an antibacterial activity. Three requirements are considered to describe the various strategies leading to a surface delivering NO. Firstly, the coating must be selected in accordance with the properties of the substrate (nature, shape, dimensions…). Secondly, the releasing and/or generating kinetics of NO should match the targeted biological application. Currently, the most promising structures are developed to provide an adaptable NO supply driven by pathophysiological needs. Finally, the biocompatibility and the stability of the surface must also be considered regarding the expected residence time of the device. A critical point of view is proposed to help readers in the design of the NO delivering surface according to its expected requirement and therapeutic purpose.

Gold nanostructured membranes to concentrate low molecular weight thiols, a proof of concept study.

Thiols are very important molecules in the biomedical field involved for example in redox homeostasis. Their detection and quantification remain difficult due to their poor stability (oxidation) linked to their strong reactivity towards other thiols (by the formation of S-S bonds) or other interfering molecules in the medium. Cellulose membranes with immobilized gold nanoparticles (AuNP) were developed to capture and quantify thiols in simple and complex matrices. This device was first optimized and characterized in terms of nanostructuration and thiol adsorption. N-Acetylcysteine (NAC) and reduced glutathione (GSH), chosen as model molecules, were filtered through the device demonstrating a maximal adsorption capacity of 270 and 60 nmol respectively. In a second step, the adsorbed species were subjected to ligand exchange using a more reactive thiol, dithiothreitol. The results showed release rates of approximately 90% for NAC and GSH. Finally, the amount of endogenous GSH in rat plasma was determined without any pretreatment. For the first time to our knowledge, a nanostructured device for the capture, selective and sensitive quantification of thiols is proposed. This device is easy to handle and overcomes matrix effects. Moreover, the very large concentration factor induced by this technology will be a valuable asset to decrease the quantification limits of analytical methods.

Physicochemical stability of nefopam and nefopam/droperidol solutions in polypropylene syringes for intensive care units.

Introduction: Nefopam has been reported to be effective in postoperative pain control with an opioid-sparing effect, but the use of nefopam can lead to nausea and vomiting. To prevent these side effects, droperidol can be mixed with nefopam. In intensive care units, high concentrations of nefopam and droperidol in syringes can be used with a continuous flow. Objectives: The first objective of this work was to study the physicochemical stability of a nefopam solution 2.5 mg/mL diluted in NaCl 0.9% in polypropylene syringes immediately after preparation and after 6, 24 and 48 hours at room temperature. The second objective was to study the physicochemical stability of mixtures of nefopam 2.5 mg/mL and droperidol 52 µg/mL diluted in NaCl 0.9% in polypropylene syringes at room temperature over 48 hours. Materials and methods: Three syringes for each condition were prepared. For each time of analysis, three samples for each syringe were prepared and analysed by high performance liquid chromatography coupled to photodiode array detection. The method was validated according to the International Conference on Harmonisation Q2(R1). Physical stability was evaluated by visual and subvisual inspection (turbidimetry by UV spectrophotometry). pH values were measured at each time of analysis. Results: Solutions of nefopam at 2.5 mg/mL and the mixture of nefopam 2.5 mg/mL with droperidol 52 µg/mL, diluted in NaCl 0.9%, without protection from light, retained more than 90% of the initial concentration after 48 hours storage at 20-25°C. No modification in visual or subvisual evaluation and pH values were observed. Conclusion: Nefopam solutions at 2.5 mg/mL and the mixture of nefopam 2.5 mg/mL with droperidol 52 µg/mL diluted in NaCl 0.9% were stable over a period of 48 hours at room temperature. These stability data provide additional knowledge to assist intensive care services in daily practice.

Design of surface ligands for blood compatible gold nanoparticles: Effect of charge and binding energy.

Gold nanoparticle (AuNP) interaction with the blood compartment as a function of their charge and the binding energy of their surface ligand was explored. Citrate, polyallylamine and cysteamine stabilized AuNP along with dihydrolipoic acid and polyethylene glycol capped AuNP were synthesized and fully characterized. Their interactions with model proteins (human albumin and human fibrinogen) were studied. Complexes formed between AuNP and protein revealed several behaviors ranging from corona formation to aggregation. Protein fluorescence quenching as a function of temperature and AuNP concentration allowed the determination of the thermodynamic parameters describing these interactions. The hemolysis induced by AuNP was also probed: an increasing or a decreasing of hemolysis ratio induced by AuNP was observed as of function of protein corona formation. Taken together, our results drew up a composite sketch of an ideal surface ligand for blood compatible AuNP. This capping agent should be strongly bound to the gold core by one or more thiol groups and it must confer a negative charge to the particles.

Towards calixarene-based prodrugs: Drug release and antibacterial behaviour of a water-soluble nalidixic acid/calix[4]arene ester adduct.

A water-soluble calixarene-based heterocyclic podand incorporating a quinolone antibiotic subunit, the nalidixic acid, was synthesised and fully characterised. Its prodrug behaviour was assessed in vitro by HPLC, demonstrating the release of the tethered quinolone in model biological conditions. Microbiological studies performed on various Gram-positive and Gram-negative reference strains showed very interesting antibacterial activities.

Nanotechnologies for Medical Devices: Potentialities and Risks.

Many novel medical devices (implantable or not) include nanomaterials through either surface-coating by nanoparticles or by direct nanostructuration of the surface. In this review, we have identified several medical devices currently on the market in various health domains (wound healing, prevention or treatment of infectious diseases, cardio-vascular diseases, organ or joint replacement, and finally medical devices associated with nanomedicines). The very peculiar physicochemical characterization of the nanostructured medical devices is described. Keys to understand their possible interaction with the organism (positive or negative via toxicity) are given. Finally, as a conclusion, we discuss the specific quality control as well as the regulatory issues arising from the lack of regulation for approving nanomaterial combining medical devices.

Labeling nitrogen species with the stable isotope 15N for their measurement by separative methods coupled with mass spectrometry: A review.

Nitrogen and its numerous hydrogenated and oxygenated derivatives are of main importance in our environment and in living cells as well in both qualitative and quantitative aspects. Their monitoring is needed to evaluate all disturbances occurring in the nitrogen cycle and in pathophysiological events related to variations of nitric oxide (NO) bioavailability. Many analytical methods are devoted to the measurement of nitrogen species, especially those related to NO, in the environmental, biological and pharmacological fields, and they have already been compiled and discussed in numerous reviews. Nitrogen isotope (15N) is stable and has a low level of natural abundance. Labeling nitrogen species with 15N associated with mass spectrometry (MS) gives rise to more mechanistic information and improved analytical performances compared to conventional methods. The present review is dedicated to the 15N labeling of related nitrogen species to monitor their interconversion and metabolism, the different chemical probes used for their derivatization and the corresponding separative methods coupled with MS for analyzing resulting adducts. The fragmentation mode of the different adducts and the resulting selectivity and sensitivity are discussed.