The antibiotic viomycin traps the ribosome in an intermediate state of translocation.

During protein synthesis, transfer RNA and messenger RNA undergo coupled translocation through the ribosome's A, P and E sites, a process catalyzed by elongation factor EF-G. Viomycin blocks translocation on bacterial ribosomes and is believed to bind at the subunit interface. Using fluorescent resonance energy transfer and chemical footprinting, we show that viomycin traps the ribosome in an intermediate state of translocation. Changes in FRET efficiency show that viomycin causes relative movement of the two ribosomal subunits indistinguishable from that induced by binding of EF-G with GDPNP. Chemical probing experiments indicate that viomycin induces formation of a hybrid-state translocation intermediate. Thus, viomycin inhibits translation through a unique mechanism, locking ribosomes in the hybrid state; the EF-G-induced 'ratcheted' state observed by cryo-EM is identical to the hybrid state; and, since translation is viomycin sensitive, the hybrid state may be present in vivo.

Phase differential enhancement of FLIM to distinguish FRET components of a biosensor for monitoring molecular activity of Membrane Type 1 Matrix Metalloproteinase in live cells.

Fluorescence lifetime-resolved imaging microscopy (FLIM) has been used to monitor the enzymatic activity of a proteolytic enzyme, Membrane Type 1 Matrix Metalloproteinase (MT1-MMP), with a recently developed FRET-based biosensor in vitro and in live HeLa and HT1080 cells. MT1-MMP is a collagenaise that is involved in the destruction of extra-cellular matrix (ECM) proteins, as well as in various cellular functions including migration. The increased expression of MT1-MMP has been positively correlated with the invasive potential of tumor cells. However, the precise spatiotemporal activation patterns of MT1-MMP in live cells are still not well-established. The activity of MT1-MMP was examined with our biosensor in live cells. Imaging of live cells was performed with full-field frequency-domain FLIM. Image analysis was carried out both with polar plots and phase differential enhancement. Phase differential enhancement, which is similar to phase suppression, is shown to facilitate the differentiation between different conformations of the MT1-MMP biosensor in live cells when the lifetime differences are small. FLIM carried out in differential enhancement or phase suppression modes, requires only two acquired phase images, and permits rapid imaging of the activity of MT1-MMP in live cells.

Fluorescence lifetimes: fundamentals and interpretations.

Fluorescence measurements have been an established mainstay of photosynthesis experiments for many decades. Because in the photosynthesis literature the basics of excited states and their fates are not usually described, we have presented here an easily understandable text for biology students in the style of a chapter in a text book. In this review we give an educational overview of fundamental physical principles of fluorescence, with emphasis on the temporal response of emission. Escape from the excited state of a molecule is a dynamic event, and the fluorescence emission is in direct kinetic competition with several other pathways of de-excitation. It is essentially through a kinetic competition between all the pathways of de-excitation that we gain information about the fluorescent sample on the molecular scale. A simple probability allegory is presented that illustrates the basic ideas that are important for understanding and interpreting most fluorescence experiments. We also briefly point out challenges that confront the experimenter when interpreting time-resolved fluorescence responses.

Fluorescence lifetime-resolved imaging.

This is a short account of fluorescence lifetime-resolved imaging, in order to acquaint readers who are not experts with the basic methods for measuring lifetime-resolved signals throughout an image. We present the early FLI (fluorescence lifetime imaging) history, review shortly the instrumentation and experimental design, discuss briefly the fundamentals of the measured fluorescence response, and introduce the basic measurement methodologies. We also emphasize the complex nature of the fluorescence response in FLI signals, and introduce certain analysis methods that are appropriate and informative for complex fluorescence decays. The advantages of model independent analyses are discussed and examples given.

Observation of intersubunit movement of the ribosome in solution using FRET.

Protein synthesis is believed to be a dynamic process, involving structural rearrangements of the ribosome. Cryo-EM reconstructions of certain elongation factor G (EF-G)-containing complexes have led to the proposal that translocation of tRNA and mRNA through the ribosome, from the A to P to E sites, is accompanied by a rotational movement between the two ribosomal subunits. Here, we have used Förster resonance energy transfer (FRET) to monitor changes in the relative orientation of the ribosomal subunits in different complexes trapped at intermediate stages of translocation in solution. Binding of EF-G to the ribosome in the presence of the non-hydrolyzable GTP analogue GDPNP or GTP plus fusidic acid causes an increase in the efficiency of energy transfer between fluorophores introduced into proteins S11 in the 30 S subunit and L9 in the 50 S subunit, and a decrease in energy transfer between S6 and L9. Similar anti-correlated changes in energy transfer occur upon binding the GTP-requiring release factor RF3. These changes are consistent with the counter-clockwise rotation of the 30 S subunit relative to the 50 S subunit observed in cryo-EM studies. Reaction of ribosomal complexes containing the peptidyl-tRNA analogues N-Ac-Phe-tRNAPhe, N-Ac-Met-tRNAMet or f-Met-tRNAfMet with puromycin, conditions favoring movement of the resulting deacylated tRNAs into the P/E hybrid state, leads to similar changes in FRET. Conversely, treatment of a ribosomal complex containing deacylated and peptidyl-tRNAs bound in the A/P and P/E states, respectively, with EF-G.GTP causes reversal of the FRET changes. The use of FRET has enabled direct observation of intersubunit movement in solution, provides independent evidence that formation of the hybrid state is coupled to rotation of the 30 S subunit and shows that the intersubunit movement is reversed during the second step of translocation.

Helix-coil transition of a four-way DNA junction observed by multiple fluorescence parameters.

The thermal denaturation of immobile four-way DNA ("Holliday-") junctions with 17 base pair arms was studied via fluorescence spectroscopic measurements. Two arms of the molecule were labeled at the 5'-end with fluorescein and tetramethylrhodamine, respectively. Melting was monitored by the fluorescence intensity of the dyes, the fluorescence anisotropy of tetramethylrhodamine, and Forster resonance energy transfer (FRET) between fluorescein and rhodamine. To fit the thermal denaturation curves of the four-way junctions, two basic thermodynamic models were tested: (1) all-or-none transitions assuming a molecularity of one, two, or four and (2) a statistical "zipper" model. The all-or-none models correspond to reaction mechanisms assuming that the cooperative melting unit (that is, the structure changing from complete helix to complete coil) consists of (1) one arm, (2) two neighboring arms (which have one continuous strand common to the two arms), or (3) all four arms. In each case, the melting of the cooperative unit takes place in a single step. The tetramolecular reaction model (four-arm melting) yielded unrealistically low van't Hoff enthalpy and entropy values, whereas the monomolecular model (one-arm melting) resulted in a poor fit to the experimental data. The all-or-none bimolecular (two neighboring arm model) fit gave intermediate standard enthalpy change (Delta H) values between those expected for the melting of a duplex with a total length between the helix lengths of one and two arms (17 and 34 base pairs). Simulations according to the zipper model fit the experimental curves best when the length of the simulated duplex was assumed to be 34 base pairs, the length of a single strand. This suggests that the most important parameter determining the melting behavior of the molecule is the end-to-end distance of the strands (34 bases) rather than the length of the individual arms (17 base pairs) and that the equilibrium concentration of partially denatured intermediate states has to be taken into account. These findings are in good agreement with results obtained for three-way DNA junctions ( Stuhmeier, F. ; Lilley, D. M. ; Clegg, R. M. Biochemistry 1997, 36, 13539 ). An interesting result is that the extent-of-melting curves derived from the fluorescence intensity and anisotropy nearly agree, whereas the curve derived from the FRET data shows a change prior to the melting. This may be an indication of a conformational change leaving the double-stranded structure intact but changing the end-to-end distance of the different arms in a way consistent with the transition to the extended square configuration ( Clegg, R. M. ; Murchie, A. I. ; Lilley, D. M. Biophys. J. 1994, 66, 99 ) of this branched molecule.

Engineering redox-sensitive linkers for genetically encoded FRET-based biosensors.

The ability to sense intracellular or intraorganellar reduction/oxidation conditions would provide a powerful tool for studying normal cell proliferation, differentiation, and apoptosis. Genetically encoded biosensors enable monitoring of the intracellular redox environment. We report the development of chimeric polypeptides useful as redox-sensitive linkers in conjunction with Förster resonance energy transfer (FRET). Alpha-helical linkers differing in length were combined with motifs that are sensitive to the redox state of the environment. The first category of linkers included a redox motif found in the thioredoxin family of oxidoreductases. This motif was flanked by two alpha-helices of equal length. The second and third categories of redox linkers were composed of alpha-helices with embedded adjacent and dispersed vicinal cysteine residues, respectively. The linkers containing redox switches were placed between a FRET pair of enhanced cyan and yellow fluorescent proteins and these constructs were tested subsequently for their efficacy. A robust method of FRET analysis, the (ratio)(A) method, was used. This method uses two fluorescence spectra performed directly on the FRET construct without physical separation of the fluorophores. The cyan/yellow construct carrying one of the designed redox linkers, RL5, exhibited a 92% increase in FRET efficiency from its reduced to oxidized states. Responsiveness of the cyan-RL5-yellow construct to changes in the intracellular redox environment was confirmed in mammalian cells by flow cytometry.

Fluorescence measurements of duplex DNA oligomers under conditions conducive for forming M-DNA (a metal-DNA complex).

M-DNA (a metal complex of DNA with millimolar concentrations of Zn2+, Co2+, or Ni2+ and basic pH) has been proposed to undergo electron transfer over long distances along the helix and has generated interest as a potential building block for nanoelectronics. We show that DNA aggregates form under solvent conditions favorable for M-DNA (millimolar zinc and pH = 8.6) by fluorescence correlation spectroscopy. We have performed steady-state Förster resonance energy transfer (FRET) experiments with DNA oligomers conjugated with 6-carboxyfluorescein and tetramethylrhodamine to the opposite ends of double-stranded DNA (dsDNA) molecules. Enhanced acceptor emission is observed for distances larger than expected for identical DNA molecules with no zinc. To avoid intermolecular FRET, the fluorescently labeled dsDNA is diluted with a 100-fold excess of unlabeled dsDNA. The intramolecular FRET efficiency increases 25-fold for a 30-mer doubly labeled duplex DNA molecule upon addition of millimolar concentrations of zinc ions. Without zinc, this oligomer has less than 1% FRET efficiency. This dramatic increase in the FRET efficiency points to either significant changes in the Förster radius or fraying of the ends of the DNA helices. The latter hypothesis is supported by our experiments with a 9-mer that show dissociation of the duplex by zinc ions.

Measurements of internal distance changes of the 30S ribosome using FRET with multiple donor-acceptor pairs: quantitative spectroscopic methods.

We present analytical and experimental procedures for determining distance changes within the 30 S subunit of the Escherichia coli ribosome using Förster resonance energy transfer (FRET). We discuss ways to contend with complexities when using FRET to measure distance changes within large multi-subunit macromolecular complexes, such as the ribosome. Complications can arise due to non-stoichiometric labeling of donor and acceptor probes, as well as environmental effects that are specific to each conjugation site. We show how to account for changes in extinction coefficients, quenching, labeling stoichiometry and other variations in the spectroscopic properties of the dye to enable more accurate calculation of distances from FRET data. We also discuss approximations that concern the orientation of the transition moments of the two dye molecules, as well as the impact of other errors in the measurement of absolute distances. Thirteen dye-pair locations with different distances using 18 independent FRET pairs conjugated to specific 30 S protein residues have been used to determine distance changes within the 30 S subunit upon association with the 50 S subunit, forming the 70 S ribosome. Here, we explain the spectroscopic methods we have used, which should be of general interest in studies that aim at obtaining quantitative distance information from FRET.

Measurement of internal movements within the 30 S ribosomal subunit using Förster resonance energy transfer.

We have used Förster resonance energy transfer (FRET) to study specific conformational changes in the Escherichia coli 30 S ribosomal subunit that occur upon association with the 50 S subunit. By measuring energy transfer between 13 different pairs of fluorescent probes attached to specific positions on 30 S subunit proteins, we have monitored changes in distance between different locations within the 30 S subunit in its free and 50 S-bound states. The measured distance changes provide restraints for modeling the movement that occurs within the 30 S subunit upon formation of the 70 S ribosome in solution. Treating the head, body, and platform domains of the 30 S subunit as simple rigid bodies, the lowest-energy solution converges on a model that satisfies each of the individual FRET restraints. In this model, the 30 S subunit head tilts towards the 50 S subunit, similar to the movement found in comparing 30 S subunits and 70 S ribosomes from X-ray and cryo-electron microscope structures, and the platform is predicted to undergo a clock-wise rotation upon association.

Base-sequence specificity of Hoechst 33258 and DAPI binding to five (A/T)4 DNA sites with kinetic evidence for more than one high-affinity Hoechst 33258-AATT complex.

The binding of Hoechst 33258 and DAPI to five different (A/T)4 sequences in a stable DNA hairpin was studied exploiting the substantial increase in dye fluorescence upon binding. The two dyes have comparable affinities for the AATT site (e.g. association constant K(a)=5.5 x 10(8) M(-1) for DAPI), and their affinities decrease in the series AATT >> TAAT approximately equal to ATAT > TATA approximately equal to TTAA. The extreme values of K(a) differ by a factor of 200 for Hoechst 33258 but only 30 for DAPI. The binding kinetics of Hoechst 33258 were measured by stopped-flow under pseudo-first order conditions with an (A/T)4 site in excess. The lower-resolution experiments can be well represented by single exponential processes, corresponding to a single-step binding mechanism. The calculated association-rate parameters for the five (A/T)4 sites are similar (2.46 x 10(8) M(-1) s(-1) to 0.86 x 10(8) M(-1) s(-1)) and nearly diffusion-controlled, while the dissociation-rate parameters vary from 0.42 s(-1) to 96 s(-1). Thus the association constants are kinetically controlled and are close to their equilibrium-determined values. However, when obtained with increased signal-to-noise ratio, the kinetic traces for Hoechst 33258 binding at the AATT site reveal two components. The concentration dependencies of the two time constants and amplitudes are consistent with two different kinetically equivalent two-step models. In the first model, fast bimolecular binding is followed by an isomerization of the initial complex. In the second model, two single-step associations form two complexes that mutually exclude each other. For both models the four reaction-rate parameters are calculated. Finally, specific dissociation kinetics, using poly[d(A-5BrU)], show that the kinetics are even more complex than either two-step model. We correlate our results with the different binding orientations and locations of Hoechst 33258 in the DNA minor groove found in several structural studies in the literature.

Conformational flexibility of four-way junctions in RNA.

Helical junctions are common architectural features in RNA. They are particularly important in autonomously folding molecules, as exemplified by the hairpin ribozyme. We have used single-molecule fluorescence spectroscopy to study the dynamic properties of the perfect (4H) four-way helical junction derived from the hairpin ribozyme. In the presence of Mg(2+), the junction samples parallel and antiparallel conformations and both stacking conformers, with a bias towards one antiparallel stacking conformer. There is continual interconversion between the forms, such that there are several transitions per second under physiological conditions. Our data suggest that interconversion proceeds via an open intermediate with reduced cation binding in which coaxial stacking between helices is disrupted. The rate of interconversion becomes slower at higher Mg(2+) concentrations, yet the activation barrier decreases under these conditions, indicating that entropic effects are important. Transitions also occur in the presence of Na(+) only; however, the coaxial stacking appears incomplete under these conditions. The polymorphic and dynamic character of the four-way RNA junction provides a source of structural diversity, from which particular conformations required for biological function might be stabilised by additional RNA interactions or protein binding.

Optical characterization of ultrasmall Si nanoparticles prepared through electrochemical dispersion of bulk Si.

Studying the properties and stability of silicon nanoparticles (Si-np) in aqueous environments may lead to novel applications in biological systems. In this work, we use absorption and photoluminescence (PL) spectroscopy to characterize ultrasmall Si-np prepared through anodic etching and ultrasonic fractionation of a crystalline Si wafer. Their behavior is studied over time in 2-propanol and during treatments with water, NaOH, HCl, and H(2)O(2). The observed population is divided into two types of material: bright species consisting of well-etched Si-np, approximately 1 nm in diameter, and dark species derived from partially etched or aggregated Si structures. The dark material is seen by its scattering in the 2-propanol and water solutions and is largely removed via precipitation with the NaOH or HCl treatment. The bright material includes three distinct species with their respective emissions in the UV-B, UV-A, and hard-blue regions of the spectrum. The hard-blue PL is shown to have a simple pH dependence with a pK(a) approximately 3, providing an important insight into its chemical origin and signaling for possible application of Si-np as environmental probes. Our results offer some potential for tailoring the PL properties of ultrasmall Si-np through control of their surface chemistry.

Two-photon fluorescence imaging and reactive oxygen species detection within the epidermis.

Two-photon fluorescence microscopy is used to detect ultraviolet-induced reactive oxygen species (ROS) in the epidermis and the dermis of ex vivo human skin and skin equivalents. Skin is incubated with the nonfluorescent ROS probe dihydrorhodamine, which reacts with ROS such as singlet oxygen and hydrogen peroxide to form fluorescent rhodamine-123. Unlike confocal microscopic methods, two-photon excitation provides depth penetration through the epidermis and dermis with little photodamage to the sample. This method also provides submicron spatial resolution such that subcellular areas that generate ROS can be detected. In addition, comparative studies can be made to determine the effect of applied agents (drugs, therapeutics) upon ROS levels at any layer or cellular region within the skin.

Fluorescence lifetime-resolved imaging: measuring lifetimes in an image.

We have given an overview of what one can gain by lifetime-resolved imaging and reviewed the major issues concerning lifetime-resolved measurements and FLI instrumentation. Instead of giving diverse selected examples, we have discussed the underlying basic pathways of deexcitation available to the molecules in the excited state. It is by traversing these pathways that compete kinetically with the fluorescence pathway of deactivation--and therefore affect the measured fluorescence lifetime--that we gain the information that lifetime-resolved fluorescence provides. It is hoped that being aware of the diversity, of pathways available to an excited fluorophore will facilitate potential users to recognize the value of FLI measurements and inspire innovative experiments using lifetime-resolved imaging. FLI gives us the ability within a fluorescence image of measuring and quantifying dynamic events taking place in the immediate surroundings of fluorophores as well as locating the fluorescent components within the image. Just as measurements in cuvettes, lifetime-resolved imaging extends considerably the potential information that can be derived from a fluorescence experiment. Our purpose has been to arouse an appreciation for the broad application of fluorescence lifetime-resolved measurements in imaging. We have given only general design characteristics of the instrumentation and discussed the characteristics that distinguish imaging from the single channel lifetime-resolved measurements. We have not provided details of the instrumentation or the presented many examples. These are available in the literature, and given in the references, and they are continually and rapidly growing.

Observation and quantification of ultraviolet-induced reactive oxygen species in ex vivo human skin.

Two-photon fluorescence imaging is used to detect UV-induced reactive oxygen species (ROS) in ex vivo human skin in this study. ROS (potentially H202, singlet oxygen or peroxynitrite [or all]) are detected after reaction with nonfluorescent dihydrorhodamine-123 (DHR) and the consequent formation of fluorescent rhodamine-123 (R123). The cellular regions at each epidermal stratum that generate ROS are identified. R-123 fluorescence is detected predominately in the lipid matrix of the stratum corneum. In contrast, the strongest R123 fluorescence signal is detected in the intracellular cytoplasm of the viable epidermal keratinocytes. A simple bimolecular one-step kinetic model is used for estimating the upper bound of the number of ROS that are generated in the skin and that react with DHR. After ultraviolet-B radiation (280-320 nm) (UVB) equivalent to 2 h of noonday summer North American solar exposure (1600 J m(-2) UVB), the model finds that 14.70 x 10(-3) mol of ROS that react with DHR are generated in the stratum corneum of an average adult-size face (258 cm(-2)). Approximately 10(-4) mol are potentially generated in the lower epidermal strata. The data show that two-photon fluorescence imaging can be used to detect ROS in UV-irradiated skin.

Bioconvertible vitamin antioxidants improve sunscreen photoprotection against UV-induced reactive oxygen species.

The ability of sunscreens and antioxidants to deactivate highly destructive reactive oxygen species in human skin has remained inconclusive. Two-photon fluorescence imaging microscopy was used to determine the effect of sunscreen/antioxidant combinations upon UV-induced ROS generation in ex vivo human skin. A sunscreen combination containing octylmethoxycinnamate (Parsol MCX) and avobenzone (Parsol 1789) at SPF 8 and SPF 15 was tested for its ability to prevent UV radiation from generating ROS in the viable epidermal strata of ex vivo human skin. A UV dose equivalent to two hours of North American solar UV was used to irradiate the skin. Each sunscreen reduced the amount of ROS induced in the viable strata by a value consistent with the SPF level. UV photons that were not absorbed/scattered by the sunscreen formulations generated ROS within the viable epidermal layers. The addition of the bioconvertible antioxidants vitamin E acetate and sodium ascorbyl phosphate (STAY-C 50) improves photoprotection by converting to vitamins E and C, respectively, within the skin. The bioconversion forms an antioxidant reservoir that deactivates the ROS generated (within the strata granulosum, spinosum, and basale) by the UV photons that the sunscreens do not block in the stratum corneum.

Polar plot representation of time-resolved fluorescence.

Measuring changes in a molecule's fluorescence emission is a common technique to study complex biological systems such as cells and tissues. Although the steady-state fluorescence intensity is frequently used, measuring the average amount of time that a molecule spends in the excited state (the fluorescence lifetime) reveals more detailed information about its local environment. The lifetime is measured in the time domain by detecting directly the decay of fluorescence following excitation by short pulse of light. The lifetime can also be measured in the frequency domain by recording the phase and amplitude of oscillation in the emitted fluorescence of the sample in response to repetitively modulated excitation light. In either the time or frequency domain, the analysis of data to extract lifetimes can be computationally intensive. For example, a variety of iterative fitting algorithms already exist to determine lifetimes from samples that contain multiple fluorescing species. However, recently a method of analysis referred to as the polar plot (or phasor plot) is a graphical tool that projects the time-dependent features of the sample's fluorescence in either the time or frequency domain into the Cartesian plane to characterize the sample's lifetime. The coordinate transformations of the polar plot require only the raw data, and hence, there are no uncertainties from extensive corrections or time-consuming fitting in this analysis. In this chapter, the history and mathematical background of the polar plot will be presented along with examples that highlight how it can be used in both cuvette-based and imaging applications.

Fluorescence lifetime imaging comes of age how to do it and how to interpret it.

Fluorescence lifetime imaging (FLI) has been used widely for measuring biomedical samples. Practical guidelines on taking successful FLI data are provided to avoid common errors that arise during the measurement. Several methods for analyzing and interpreting FLI results are also introduced; e.g., a model-free data analysis method called the polar plot allows visualization and analysis of FLI data without iterative fitting, and an image denoising algorithm called variance-stabilizing-transform TI Haar helps to elucidate the information of a complex biomedical sample. The instrument considerations and data analysis of Spectral-FLI are also discussed.

Cellular and Molecular Bioengineering: A Tipping Point.

In January of 2011, the Biomedical Engineering Society (BMES) and the Society for Physical Regulation in Biology and Medicine (SPRBM) held its inaugural Cellular and Molecular Bioengineering (CMBE) conference. The CMBE conference assembled worldwide leaders in the field of CMBE and held a very successful Round Table discussion among leaders. One of the action items was to collectively construct a white paper regarding the future of CMBE. Thus, the goal of this report is to emphasize the impact of CMBE as an emerging field, identify critical gaps in research that may be answered by the expertise of CMBE, and provide perspectives on enabling CMBE to address challenges in improving human health. Our goal is to provide constructive guidelines in shaping the future of CMBE.