MRI and Ultrasound Visualization of a Nerve Repair Implant Containing Nitinol.

Background: Nerve Tape is a novel nerve repair device containing nitinol microhooks that provide sutureless attachment for nerve coaptation. This study evaluated visualization of Nerve Tape on magnetic resonance imaging (MRI) and ultrasound, with the objective of exploring its potential as an imaging marker for localizing nerve repair sites. Methods: Phantom imaging experiments were first conducted to assess the visibility of Nerve Tape on MRI and ultrasound. A cadaveric limb investigation was then performed to further characterize the magnetic susceptibility patterns of Nerve Tape and to confirm its localization at the repair site. Results: Phantom imaging experiments demonstrated clear visualization of Nerve Tape on both MRI and ultrasound, with Nerve Tape microhooks appearing as signal voids on MRI and hyperechoic foci on ultrasound. Subsequent cadaveric limb investigation further characterized Nerve Tape's magnetic susceptibility patterns and confirmed localization of the device at the repair site. The physical dimensions of Nerve Tape and locations observed on both MRI and ultrasound matched design and measurements made during surgery. Measurement discrepancies could be attributed to magnetic susceptibility artifacts in MRI, and to comet tail and shadowing effects in ultrasound. Conclusions: Repairs performed with Nerve Tape can be reliably localized for imaging, potentially facilitating assessment of repair site integrity and further advancement toward image-based monitoring of nerve regeneration. Further research, including in vivo human studies, is warranted to confirm these preliminary findings.

Biomechanical Testing of a Novel Device for Sutureless Nerve Repair.

Suboptimal nerve end alignment achieved with conventional nerve repair techniques may contribute to poor clinical outcomes. In this study, we introduce Nerve Tape®, a novel nerve repair device that integrates flexible columns of Nitinol microhooks within a biologic backing to entubulate, align, and secure approximated nerve ends. This study compares the repair strength of Nerve Tape with that of conventional microsuture repairs. Thirty small (2 mm) and 30 large (7 mm) diameter human cadaveric nerves were transected and repaired utilizing Nerve Tape or appropriate microsuture technique. Biomechanical testing was performed using a horizontal tensile tester. The repaired nerves were loaded until failure at a distraction rate of 40 mm/min, and the maximum failure load was determined. In the small nerve groups, the load-to-failure for Nerve Tape repairs (2.33 ± 0.66 N) was significantly higher than for suture repairs (1.22 ± 0.52 N; p < 0.05). In the large nerve groups, no significant difference in load-to-failure was found between Nerve Tape (7.45 ± 2.66 N) and suture repairs (5.82 ± 1.59 N: p = 0.12). Suture repairs tended to fail by rupture, whereas Nerve Tape failures resulted from microhook pullout. Nerve Tape is a novel nerve coaptation device that provides mechanical repair strength equal or greater to clinically relevant microsuture repairs.

Highly-compliant, microcable neuroelectrodes fabricated from thin-film gold and PDMS.

Bio-electrodes have traditionally been made of materials such as metal and silicon that are much stiffer than the tissue from which they record or stimulate. This difference in mechanical compliance can cause incomplete or ineffective contact with the tissue. The electrode stiffness has also been hypothesized to cause chronic low-grade injury and scar-tissue encapsulation, reducing stimulation and recording efficiency. As an initial step to resolve these issues with electrode performance, we have developed and characterized electrically-functional, low-Young's modulus, microcable-shaped neuroelectrodes and demonstrated electrophysiological recording functionality. The microcable geometry gives the electrodes a similar footprint to traditional wire and microwire neuroelectrodes, while reducing the difference in Young's modulus from nervous tissue by orders of magnitude. The electrodes are composed of PDMS and thin-film gold, affording them a high-level of compliance that is well suited for in vivo applications. The composite Young's modulus of the electrode was experimentally determined to be 1.81 ± 0.01 MPa. By incorporating a high-tear-strength silicone, Sylgard 186, the load at failure was increased by 92%, relative to that of the commonly used Sylgard 184. The microcable electrodes were also electromechanically tested, with measurable conductivity (220 kΩ) at an average 8% strain (n = 2) after the application of 200% strain. Electrophysiological recording is demonstrated by wrapping the electrode around a peripheral nerve, utilizing the compliance and string-like profile of the electrode for effective recording in nerve tissue.

Microneedle cuff electrodes for extrafascicular peripheral nerve interfacing.

OBJECTIVE: The work presented here describes a new tool for peripheral nerve interfacing, called the microneedle cuff (µN-cuff) electrode. APPROACH: µN arrays are designed and integrated into cuff electrodes for penetrating superficial tissues while remaining non-invasive to delicate axonal tracts. MAIN RESULTS: In acute testing, the presence of 75 µm height µNs decreased the electrode-tissue interface impedance by 0.34 kΩ, resulting in a 0.9 mA reduction in functional stimulation thresholds and increased the signal-to-noise ratio by 9.1 dB compared to standard (needle-less) nerve cuff electrodes. Preliminary acute characterization suggests that µN-cuff electrodes provide the stability and ease of use of standard cuff electrodes while enhancing electrical interfacing characteristics. SIGNIFICANCE: The ability to stimulate, block, and record peripheral nerve activity with greater specificity, resolution, and fidelity can enable more precise spatiotemporal control and measurement of neural circuits.

Characterization of a composite injury model of severe lower limb bone and nerve trauma.

Severe extremity trauma often results in large zones of injury comprising multiple types of tissue and presents many clinical challenges for reconstruction. Considerable investigation is ongoing in tissue engineering and regenerative medicine therapeutics to improve reconstruction outcomes; however, the vast majority of musculoskeletal trauma models employed for testing the therapeutics consist of single-tissue defects, offering limited utility for investigating strategies for multi-tissue repair. Here we present the first model of composite lower limb bone and nerve injury, characterized by comparison to well-established, single-tissue injury models, using biomaterials-based technologies previously demonstrated to show promise in those models. Quantitative functional outcome measures were incorporated to facilitate assessment of new technologies to promote structural and functional limb salvage following severe extremity trauma. Nerve injury induced significant changes in the morphology and mechanical properties of intact bones. However, BMP-mediated segmental bone regeneration was not significantly impaired by concomitant nerve injury, as evaluated via radiographs, microcomputed tomography (µCT) and biomechanical testing. Neither was nerve regeneration significantly impaired by bone injury when evaluated via histology and electrophysiology. Despite the similar tissue regeneration observed, the composite injury group experienced a marked functional deficit in the operated limb compared to either of the single-tissue injury groups, as determined by quantitative, automated CatWalk gait analysis. As a whole, this study presents a challenging, clinically relevant model of severe extremity trauma to bone and nerve tissue, and emphasizes the need to incorporate quantitative functional outcome measures to benchmark tissue engineering therapies.

Regenerative scaffold electrodes for peripheral nerve interfacing.

Advances in neural interfacing technology are required to enable natural, thought-driven control of a prosthetic limb. Here, we describe a regenerative electrode design in which a polymer-based thin-film electrode array is integrated within a thin-film sheet of aligned nanofibers, such that axons regenerating from a transected peripheral nerve are topographically guided across the electrode recording sites. Cultures of dorsal root ganglia were used to explore design parameters leading to cellular migration and neurite extension across the nanofiber/electrode array boundary. Regenerative scaffold electrodes (RSEs) were subsequently fabricated and implanted across rat tibial nerve gaps to evaluate device recording capabilities and influence on nerve regeneration. In 20 of these animals, regeneration was compared between a conventional nerve gap model and an amputation model. Characteristic shaping of regenerated nerve morphology around the embedded electrode array was observed in both groups, and regenerated axon profile counts were similar at the eight week end point. Implanted RSEs recorded evoked neural activity in all of these cases, and also in separate implantations lasting up to five months. These results demonstrate that nanofiber-based topographic cues within a regenerative electrode can influence nerve regeneration, to the potential benefit of a peripheral nerve interface suitable for limb amputees.

Thin-film enhanced nerve guidance channels for peripheral nerve repair.

It has been demonstrated that nerve guidance channels containing stacked thin-films of aligned poly(acrylonitrile-co-methylacrylate) fibers support peripheral nerve regeneration across critical sized nerve gaps, without the aid of exogenous cells or proteins. Here, we explore the ability of tubular channels minimally supplemented with aligned nanofiber-based thin-films to promote endogenous nerve repair. We describe a technique for fabricating guidance channels in which individual thin-films are fixed into place within the lumen of a polysulfone tube. Because each thin-film is <10 microm thick, this technique allows fine control over the positioning of aligned scaffolding substrate. We evaluated nerve regeneration through a 1-film guidance channel--containing a single continuous thin-film of aligned fibers--in comparison to a 3-film channel that provided two additional thin-film tracks. Thirty rats were implanted with one of the two channel types, and regeneration across a 14 mm tibial nerve gap was evaluated after 6 weeks and 13 weeks, using a range of morphological and functional measures. Both the 1-film and the 3-film channels supported regeneration across the nerve gap resulting in functional muscular reinnervation. Each channel type characteristically influenced the morphology of the regeneration cable. Interestingly, the 1-film channels supported enhanced regeneration compared to the 3-film channels in terms of regenerated axon profile counts and measures of nerve conduction velocity. These results suggest that minimal levels of appropriately positioned topographical cues significantly enhance guidance channel function by modulating endogenous repair mechanisms, resulting in effective bridging of critically sized peripheral nerve gaps.