Development of a new SPE UPLC-MS/MS method for extraction and quantitation of toluene diamine on gloves following toluene diisocyanate exposure.

RATIONALE: Toluene diisocyanate (TDI) is a highly reactive isocyanate commonly used as a mixture of 2,4- and 2,6- isomers in the production of flexible foams. Exposure to TDI occurs primarily through vapour inhalation in workplaces where TDI is produced or used, but dermal exposure is also possible during some tasks. To ensure workplace safety, accurate monitoring of TDI and toluene diamine (TDA) levels is required. Methods of quantifying field effectiveness of gloves in preventing dermal exposure have not been established. Therefore, there is a need to develop a new practical method for assessing glove effectiveness for TDI/TDA. METHOD: A new offline SPE UPLC-MS/MS method for the quantitation of TDA isomers from TDI-exposed gloves was developed. Gloves were dipped in a solution of 1% acetic acid leading to a full conversion to TDA. TDA-free amine compounds were derivatized with acetic anhydride to increase chromatographic retention and signal intensity. RESULTS: 2,4-Diaminotoluene-α, α, α-d3 (2,4-d3 -TDA) was selected as a surrogate standard to minimise the variability in sample preparation and instrumental sensitivity. The choice of UPLC-MS/MS operated in multiple reaction monitoring (MRM) mode allowed to reach much lower limits of detection (LOD). The LOD of the method was 6.86 and 2.83 ng/mL (0.03 and 0.01 µg) for 2,6-TDA and 2,4-TDA, respectively. The limit of quantitation (LOQ) was 22.85 and 9.42 ng/mL (0.11 and 0.05 µg) for 2,6-TDA and 2,4-TDA, respectively. CONCLUSION: A new UPLC-MS/MS analytical method has been developed to determine field effectiveness of gloves for preventing dermal exposure to TDI/TDA. The new technique overcomes some limitations for measuring putative dermal exposure to isocyanates and may be useful in exposure monitoring and future research on isocyanate health risks.

Synthesis of 3-Alkyl Oxazolidines, Derived from 2-Hydroxymethyl Piperidine, as Analytical Standards for the Analysis of Volatile Aldehydes in the Workplace.

Hexahydro-3-alkyl-3H-oxazolo[3,4-a]pyridines 4-15 for the quantitative analysis of various aldehydes were obtained in good yield via the condensation reaction of 2-hydroxymethylpiperidine (2-HMP) with aldehydes under mild conditions. When acrolein was used, the bicyclic 17 was obtained. This novel compound has suitable physical characteristics for an analytical standard. The hexahydro-3-vinyl-3H-oxazolo[3,4-a]pyridine 16 can be obtained at higher temperatures using an excess of acrolein (3 equiv). Following the same procedure as for 16, but with an excess of 2-HMP (2 equiv), a diastereomeric mixture of 18/19, which are both bisadducts of 2-HMP with acrolein, was obtained. The latter mixture can be easily converted into pure 18. Mechanistically, a thorough 1H-NMR study did not show any evidence that the condensation reaction proceeded via an enamine. The reaction probably proceeded through an elusive hemiaminal and fleeting iminium ion, which underwent subsequent cyclization to give hexahydro-3-alkyl-3H-oxazolo[3,4-a]pyridines 4-16. The reaction pathways for the preparation of 4-18 are described.

Field biomonitoring using the zebra mussel Dreissena polymorpha and the quagga mussel Dreissena bugensis following immunotoxic reponses. Is there a need to separate the two species?

The zebra mussel, Dreissena polymorpha constitutes an extensively used sentinel species for biomonitoring in European and North American freshwater systems. However, this invasive species is gradually replaced in freshwater ecosystem by Dreissena bugensis, a closely related dreissenid species that shares common morphological characteristics but possess some physiological differences. However, few are known about differences on more integrated physiological processes that are generally used as biomarkers in biological monitoring studies. Declining of zebra mussel populations raises the question of the sustainability of using one or both species indifferently to maintain the quality of environmental pollution monitoring data. In our study, we performed a field comparative study measuring immune-related markers and bioaccumulation of PCBs, PAHs and PBDEs in sympatrically occurring mussel populations from three sites of the St. Lawrence River. For tested organisms, species were identified using RFLP analysis. Measurement of bioaccumulated organic compounds indicated a higher accumulation of PCBs and PBDEs in D. bugensis soft tissues compared to D. polymorpha while no differences were noticed for PAHs. Results of hemocytic parameters highlighted that differences of hemocyte distributions were associated to modulations of phagocytic activities. Moreover, marked differences occurred in measurement of hemocytic oxidative activity, indicating divergences between the two species for ROS regulation strategies. This physiological characteristic may deeply influence species responses facing environmental or pollution related stress and induce bias if the two species are not differentiated in further biomarker or bioaccumulation measurement-based studies.

QuEChERS extraction for multi-residue analysis of PCBs, PAHs, PBDEs and PCDD/Fs in biological samples.

In this study, a fast and rugged method is presented for the analysis of PCBs, PAHs, PBDEs and PCDD/Fs in biological tissues using a simple Quick, Easy, Cheap, Efficient, Rugged and Safe (QuEChERS) extraction and a clean-up by Gel Permeation Chromatography (GPC) and silica Solid Phase Extraction (SPE). Development was performed on blue mussels (Mytilus edulis) and Atlantic salmon (Salmo salar) for evaluation of two ranges of lipid and water content of biological tissues. Statistical validation was performed with Atlantic salmon samples. Forty-five PAHs were analyzed including the priority list of the US EPA and the European Union with 41 PCBs, 24 PBDEs and 17 PCDD/Fs. Instrumental analyses were performed on Gas Chromatography - High Resolution Mass Spectrometry (GC-HRMS). Accuracy was evaluated for PCBs and PCDD/Fs with a certified reference material furnished by the National Research Council Canada (NRCC) and also compared with results obtained by the conventional Soxhlet extraction. Statistical validation showed recoveries for PCBs, PAHs, PBDEs and PCDD/Fs close to 100% with average Relative Standard Deviation (RSD) lower than 10% and internal standard recoveries in the range of 70% with average RSD ranging from 5-15%. Average calculated Method Detection Limits (MDLs) were lower than 0.05µg/Kg for PCBs, 0.2µg/Kg for PAHs and PBDEs and 1ng/Kg for PCDD/Fs. The method is a faster and cheaper alternative to the time-consuming conventional method that has been used in most environmental laboratories.