ß

For the first time, the (d,^{2}He) reaction was successfully used in inverse kinematics to extract the Gamow-Teller transition strength in the ß^{+} direction from an unstable nucleus. The new technique was made possible by the use of an active-target time-projection chamber and a magnetic spectrometer, and opens a path to addressing a range of scientific challenges, including in astrophysics and neutrino physics. In this Letter, the nucleus studied was ^{14}O, and the Gamow-Teller transition strength to ^{14}N was extracted up to an excitation energy of 22 MeV. The data were compared to shell-model and state-of-the-art coupled-cluster calculations. Shell-model calculations reproduce the measured Gamow-Teller strength distribution up to about 15 MeV reasonably well, after the application of a phenomenological quenching factor. In a significant step forward to better understand this quenching, the coupled-cluster calculation reproduces the full strength distribution well without such quenching, owing to the large model space, the inclusion of strong correlations, and the coupling of the weak interaction to two nucleons through two-body currents.

Constraining the

The ^{30}P(p,γ)^{31}S reaction plays an important role in understanding the nucleosynthesis of A≥30 nuclides in oxygen-neon novae. The Gaseous Detector with Germanium Tagging was used to measure ^{31}Cl ß-delayed proton decay through the key J^{π}=3/2^{+}, 260-keV resonance. The intensity I_{ßp}^{260}=8.3_{-0.9}^{+1.2}×10^{-6} represents the weakest ß-delayed, charged-particle emission ever measured below 400 keV, resulting in a proton branching ratio of Γ_{p}/Γ=2.5_{-0.3}^{+0.4}×10^{-4}. By combining this measurement with shell-model calculations for Γ_{γ} and past work on other resonances, the total ^{30}P(p,γ)^{31}S rate has been determined with reduced uncertainty. The new rate has been used in hydrodynamic simulations to model the composition of nova ejecta, leading to a concrete prediction of ^{30}Si:^{28}Si excesses in presolar nova grains and the calibration of nuclear thermometers.

Evidence of a Near-Threshold Resonance in

A narrow near-threshold proton-emitting resonance (E_{x}=11.4 MeV, J^{π}=1/2^{+}, and Γ_{p}=4.4 keV) was directly observed in ^{11}B via proton resonance scattering. This resonance was previously inferred in the ß-delayed proton emission of the neutron halo nucleus ^{11}Be. The good agreement between both experimental results serves as a ground to confirm the existence of such exotic decay and the particular behavior of weakly bound nuclei coupled to the continuum. R-matrix analysis shows a sizable partial decay width for both, proton and α (Γ_{α}=11 keV) emission channels.

First Direct Measurement of

Type-I x-ray bursts can reveal the properties of an accreting neutron star system when compared with astrophysics model calculations. However, model results are sensitive to a handful of uncertain nuclear reaction rates, such as ^{22}Mg(α,p). We report the first direct measurement of ^{22}Mg(α,p), performed with the Active Target Time Projection Chamber. The corresponding astrophysical reaction rate is orders of magnitude larger than determined from a previous indirect measurement in a broad temperature range. Our new measurement suggests a less-compact neutron star in the source GS1826-24.

Erratum: Direct Observation of Proton Emission in

This corrects the article DOI: 10.1103/PhysRevLett.123.082501.

Direct Observation of Proton Emission in

The elusive ß^{-}p^{+} decay was observed in ^{11}Be by directly measuring the emitted protons and their energy distribution for the first time with the prototype Active Target Time Projection Chamber in an experiment performed at ISAC-TRIUMF. The measured ß^{-}p^{+} branching ratio is orders of magnitude larger than any previous theoretical model predicted. This can be explained by the presence of a narrow resonance in ^{11}B above the proton separation energy.

Effect of electrical water bath stunning on physical reflexes of broilers: evaluation of stunning efficacy under field conditions.

The effects of different amounts and frequencies of stunning sine wave alternating current were investigated under field conditions. Seven hundred and fifty broilers were stunned in an electrical water bath with an average root mean square (RMS) current of 150, 200, and 250 mA and frequencies of 200, 400, 600, 800, and 1,200 Hz. The occurrence of corneal reflex, spontaneous eye blinking, and a positive response to a painful stimulus were monitored and recorded immediately after the stunning and at 20 s post-stun. Statistical analysis showed that the electrical stunning frequency (P=0.0004), the stunning RMS current (P<0.0001) and the interaction between stunning frequency and stunning current (P<0.0001) had a significant effect on the occurrence of animals experiencing an abolition of corneal reflex at 20 s post-stun.At a current of 150 mA, the probability of a successful stun was over 90% at 200 Hz, approximately 40% at 400 Hz, and below 5% for frequencies greater than 600 Hz. So, stunning at frequencies greater than 600 Hz cannot be recommended when a RMS current of 150 mA is applied. The maximum probability of a successful stun was obtained for a current level of 200 mA at 400 Hz and for a current level of 250 mA at 400 and 600 Hz, whereas the stunning treatments at 1,200 Hz provided the lowest probability of a successful stun. Assessment of spontaneous eye blinking and responses to comb pinching confirmed the indications coming from the analysis of corneal reflex.

Fast bedside measurement of blood count and C-reactive protein in newborns compared with conventional methods.

BACKGROUND: Abnormal complete blood count (CBC) and high plasma C-reactive protein (CRP) are associated with neonatal infections and could be helpful in the diagnosis of neonatal sepsis and to monitor the antibiotic treatment. OBJECTIVES: The aim of this work is to evaluate and compare the performance of a bedside analyzer for blood count and C-reactive protein (CRP) with a conventional analyzer in a neonatal population. METHODS: 150 capillary or venous blood samples of term and preterm newborns were processed on an ABX-MicrosCRP200 analyzer and on a SysmexXE2100 (conventional hematology analyzer) for CBC, leukocyte differential, reticulocytes, and nucleated red blood cells (NRBC); high-sensitivity CRP (hs-CRP) was performed on a ModularPE. The differences between complete blood count and CRP were regressed against their means and assessed by means of intra-class-correlation. RESULTS: The intra-class-correlation for white blood cell (WBC) was 0.98, for hemoglobin 0.97, for hematocrit 0.96, for mean corpuscular volume 0.95, and for platelet 0.98. ABX-MicrosCRP200 overestimated the WBC (+1.27 x 10(3)/microL; p < 0.001), hematocrit (+1.80%; p < 0.001), and platelet (+13.55 x 10(3)/microL; p < 0.001). The intra-class-correlation for CRP was high (0.97), without systematic difference between the two values (p = 0.64). CONCLUSIONS: The agreement between the two methods was high for both tests. However, the SD of the difference for WBC and platelet could be clinically important in leukopenic or thrombocytopenic newborns.

The determinants of performance in master swimmers: a cross-sectional study on the age-related changes in propelling efficiency, hydrodynamic position and energy cost of front crawl.

The decrease in swimming performance (v (max)) that occurs with age is a not only consequence of the physiological decrease in maximal metabolic power ([Formula: see text]) but can also be expected to depend on an increase in the energy cost of swimming (C) [Formula: see text] In turn, for a given speed and stroke C = W (d) / (η(P)η(o)) where W (d) is hydrodynamic resistance, η(P) is propelling efficiency and η(o) is overall efficiency. The aim of this study was to measure C in 47 male masters (31-85 years old) swimming the front crawl at sub-maximal, aerobic, speeds. During the experiments propelling efficiency and projected frontal area (A (eff), an index of W (d)) were also determined by kinematic analysis. "Elder" masters (60-80 years) swam at a significantly slower pace (0.65 vs. 0.91 m s(-1)), with a lower η(P) (0.23 vs. 0.31) and a larger A (eff) (0.39 vs. 0.23 m(2)) than "younger" masters (30-60 years). No significant differences in C (1.45 kJ m(-1), on the average) were observed as a function of age or speed, but C values were significantly higher than those assessed in young elite swimmers at the very same speeds; the difference increasing with age with a rate of 0.75 % per year. With the due considerations (in this study the observed changes in η(P), A (eff) and C can be either attributed to changes in speed or age) these data confirm the hypothesis that an increase in C contributes to the decrease in swimming performance that occurs with age.

Design of a custom-made device for real-time optical measurement of differential mineral concentrations in three-dimensional scaffolds for bone tissue engineering.

Monitoring bone tissue engineered (TEed) constructs during their maturation is important to ensure the quality of applied protocols. Several destructive, mainly histochemical, methods are conventionally used to this aim, requiring the sacrifice of the investigated samples. This implies (i) to plan several scaffold replicates, (ii) expensive and time consuming procedures and (iii) to infer the maturity level of a given tissue construct from a cognate replica. To solve these issues, non-destructive techniques such as light spectroscopy-based methods have been reported to be useful. Here, a miniaturized and inexpensive custom-made spectrometer device is proposed to enable the non-destructive analysis of hydrogel scaffolds. Testing involved samples with a differential amount of calcium salt. When compared to a reference standard device, this custom-made spectrometer demonstrates the ability to perform measurements without requiring elaborate sample preparation and/or a complex instrumentation. This preliminary study shows the feasibility of light spectroscopy-based methods as useful for the non-destructive analysis of TEed constructs. Based on these results, this custom-made spectrometer device appears as a useful option to perform real-time/in-line analysis. Finally, this device can be considered as a component that can be easily integrated on board of recently prototyped bioreactor systems, for the monitoring of TEed constructs during their conditioning.

Design and construction of a novel energy-loss optical scintillation system (ELOSS) for heavy-ion particle identification.

We present the development of a novel heavy-ion particle-identification (PID) device based on an energy-loss measurement to be implemented in the focal plane of the S800 spectrograph of the Facility for Rare Isotope Beams (FRIB). The new instrument consists of a multi-segmented optical detector [energy-loss optical scintillation system (ELOSS)] that is filled with xenon at pressures ranging from 400 to 800 Torr. The gas volume is surrounded by arrays of photomultiplier tubes and placed along the direction of the beam for recording the prompt scintillation light. The number of detected photons, which is proportional to the energy deposited by the beam particle along its track in the detector volume, allows one to identify the corresponding atomic number (Z). The ELOSS technology is expected to provide high-resolution ΔE measurements (≤0.6% σ) at a high counting rate (>50 kHz). In addition, it has the capability of providing timing information with around 150 ps resolution (σ) compared to the lack of useable timing information of the conventional ionization chamber relying on drifting charges. The development of fast, accurate ΔE measurement techniques for present and future nuclear science facilities will have a high impact on the design and implementation of rare-isotope beam experiments at FRIB and their scientific outcome. As such, ELOSS also represents a prototype for the development of PID detector systems of other planned and future spectrometers, such as the high rigidity spectrometer at FRIB.

Beam particle identification and tagging of incompletely stripped heavy beams with HEIST.

A challenge preventing successful inverse kinematics measurements with heavy nuclei that are not fully stripped is identifying and tagging the beam particles. For this purpose, the HEavy ISotope Tagger (HEIST) has been developed. HEIST utilizes two micro-channel plate timing detectors to measure the time-of-flight, a multi-sampling ion chamber to measure energy loss, and a high-purity germanium detector to identify isomer decays and calibrate the isotope identification system. HEIST has successfully identified 198Pb and other nearby nuclei at energies of about 75 MeV/A. In the experiment discussed, a typical cut containing 89% of all 198Pb80+ in the beam had a purity of 86%. We examine the issues of charge state contamination. The observed charge state populations of these ions are presented and, using an adjusted beam energy, are well described by the charge state model GLOBAL.

Development and validation of an in-silico tool for the study of therapeutic agents in 3D cell cultures.

Computational models constitute a fundamental asset for cancer research and drug R&D, as they provide controlled environments for testing of hypotheses and are characterized by the total knowledge of the system. These features are particularly useful for 3D cell culture models where a complex interaction among cells and their environments ensues. In this work, we present a programmable simulator capable of reproducing the behavior of cells cultured in 3D scaffolds and their response to pharmacological treatment. This system will be shown to be able to accurately describe the temporal evolution of the density of a population of MDA-MB-231 cells following their treatment with different concentrations of doxorubicin, together with a newly described drug-resistance mechanism and potential re-sensitization strategy. An extensive technical description of this model will be coupled to its experimental validation and to an analysis aimed at identifying which variables and behaviors account for differences in the response to treatment. Comprehensively, this work contributes to the growing field of integrated in-silico/in-vitro analysis of biological processes which has great potential for both the increase of our scientific knowledge and the development of novel, more effective treatments.

New prospective for non-invasive detection, grading, size evaluation, and tumor location of prostate cancer.

BACKGROUND: PSA blood test and other present screening tools fail to provide the required sensitivity and specificity and, at early stages, lack correlation with tumor grade, volume, and location. Thus alternative approaches are highly desired. We present and assess a novel method for PCa detection, grading, volume evaluation and tumor location, based on non-invasive zinc concentration mapping in the gland by means of a dedicated rectal probe. METHODS: Zinc-concentration values measured in histologically examined tissue fragments from needle biopsy of 598 patients were analyzed. They were used to generate computer simulated zinc-concentration maps, further analyzed with image-processing tools. The tumor detection performances versus Gleason grade were assessed. RESULTS: A significant increase of zinc depletion with increasing Gleason pattern (grade) classification was established. Tumor detection performance in zinc-concentration maps progressively improves with the cancer's first component score. Reliable information on the location, size and Gleason-grade combination of the lesion can be extracted for clinically relevant volumes. CONCLUSIONS: Zinc depletion in the prostate peripheral zone is the basis for a novel, non-invasive PCa detection, localization, volume evaluation and grading method. Its realization and application as a pre-biopsy and pre-treatment examination, or a follow-up tool, relies on the development of a dedicated transrectal probe. It should have significant impact on biopsy effectiveness, point at a possible extraprostatic extension and provide critical data for focal treatment. The information on tumor grade and distribution may have an important impact on disease management.

Evaluating the cancer detection and grading potential of prostatic-zinc imaging: a simulation study.

The present work deals with the analysis of prostatic-zinc-concentration images. The goal is to evaluate potential clinically relevant information that can be extracted from such images. In the absence of experimental images, synthetic ones are produced from clinically measured zinc-concentration distributions in certified benign and cancerous tissue samples, classified by the lesion grade. We describe the method for producing the images and model the effect of counting statistics noise. We present in detail the image analysis, which is based on a combination of standard image processing and segmentation tools, optimized for this particular application. The information on lowest zinc value obtained from the image analysis is translated to clinical data such as tumour presence, location, size and grade. Their confidence is evaluated with the help of standard statistical tools such as receiver operating characteristic analysis. The present work predicts a potential for detecting small prostate-cancer lesions, of grade (4+3) and above, with very good specificity and sensitivity. The present analysis further provides data on the pixel size and image counting statistics requested from the trans-rectal probe that will record in vivo prostatic-zinc maps in patients.

Multi-layer thick gas electron multiplier (M-THGEM): A new MPGD structure for high-gain operation at low-pressure.

The operating principle and performances of the Multi-layer Thick Gaseous Electron Multiplier (M-THGEM) are presented. The M-THGEM is a novel hole-type gaseous electron multiplier produced by multi-layer printed circuit board technology; it consists of a densely perforated assembly of multiple insulating substrate sheets (e.g., FR-4), sandwiched between thin metallic-electrode layers. The electron avalanche processes occur along the successive multiplication stages within the M-THGEM holes, under the action of strong dipole fields resulting from the application of suitable potential differences between the electrodes. The present work focuses on the investigation of two different geometries: a two-layer M-THGEM (either as single or double-cascade detector) and a single three-layer M-THGEM element, tested in various low-pressure He-based gas mixtures. The intrinsically robust confinement of the avalanche volume within the M-THGEM holes provides an efficient reduction of the photon-induced secondary effects, resulting in a high-gain operation over a broad pressure range, even in pure elemental gas. The operational principle, main properties (maximum achievable gain, long-term stability, energy resolution, etc.) under different irradiation conditions, as well as capabilities and potential applications are presented and discussed.

Multiplex PCR method for use in real-time PCR for identification of fish fillets from grouper (Epinephelus and Mycteroperca species) and common substitute species.

Mitochondrial 16S rRNA sequences from morphological validated grouper (Epinephelus aeneus, E. caninus, E. costae, and E. marginatus; Mycteroperca fusca and M. rubra), Nile perch (Lates niloticus), and wreck fish (Polyprion americanus) were used to develop an analytical system for group diagnosis based on two alternative Polymerase Chain Reaction (PCR) approaches. The first includes conventional multiplex PCR in which electrophoretic migration of different sizes of bands allowed identification of the fish species. The second approach, involving real-time PCR, produced a single amplicon from each species that showed different Tm values allowing the fish groups to be directly identified. Real-time PCR allows the quick differential diagnosis of the three groups of species and high-throughput screening of multiple samples. Neither PCR system cross-reacted with DNA samples from 41 common marketed fish species, thus conforming to standards for species validation. The use of these two PCR-based methods makes it now possible to discriminate grouper from substitute fish species.

[PCBs cause necrosis of L6C5 myoblasts]. / I PCB causano necrosi dei mioblasti L6C5.

Polychlorinated biphenyls (PCBs) are structurally related to dioxins, widely used in the past in various industrial applications and daily used products. Although PCBs production was discontinued more than twenty years ago, their chemical stability and high lipophilicity make them persistent pollutants and dangerous occupational contaminants. Skeletal muscle is an important site of PCB accumulation. Our previous results about the effects of PCBs on L6C5 myoblasts, showed that "low concentrations" (< 10 microg/ml) of these compounds inhibit in vitro myogenic differentiation in a concentration-dependent fashion, while toxic effects only begin to be evident at PCB concentrations > or = 10 microg/ml. In the present paper we wondered if the observed cell mortality is due to necrosis or if it depends on the activation of programmed cell death mechanisms (apoptosis). Using different methods of analysis, we have observed that PCBs cause necrosis of myogenic cells and that such effect is related to the employed concentrations and to the time of exposure (EC50 approximately = 50 microg/ml). Our results may help to explain the creatin kinase elevation, observed in the blood of patients acutely exposed to high concentrations of PCBs, as the consequence of a necrotic damage of the skeletal muscle. It will be therefore interesting to evaluate the presence of muscular damages in the chronic exposures to PCBs.

Elevation of serum copper levels in Alzheimer's disease.

OBJECTIVE: To determine whether serum trace metals and oxidative species are related to abnormal cognition in AD. METHODS: The authors studied serum peroxides, copper, iron, transferrin, and antioxidant capacity in 79 patients with AD (mean age 74.3 years; 25 men, 54 women) and in 76 cognitively normal individuals (mean age 70.1 years; 33 men, 43 women). The relation of these oxidative and trace metals to APOE epsilon4 allele frequency, neuropsychological performance, and cerebrovascular or atrophic burden, as estimated by brain MRI and ultrasonography of cerebral vessels, was evaluated. RESULTS: Copper level was higher (p < 0.001) in subjects with AD than control subjects (specificity = 95%, sensitivity = 60%) with a cutoff serum level of 16 micro mol/L (1.02 mg/L). An increase of 1 micro mol/L in serum copper accounted for 80% of the risk of having AD and correlated with poor neuropsychological performance and medial temporal lobe atrophy (p < 0.03). Antioxidant capacity decreased and correlated with medial temporal lobe atrophy (p < 0.009) and with APOE epsilon4 allele (p = 0.004). CONCLUSIONS: Copper may play a role in neurodegenerative processes in AD, and serum copper measurement may prove to be a peripheral diagnostic marker for AD.

Distribution and behavior of Listeria monocytogenes in three lots of naturally-contaminated vacuum-packed smoked salmon stored at 2 and 10 degrees C.

The incidence, the number and the behavior of L. monocytogenes in three lots of naturally-contaminated vacuum-packed sliced smoked salmon, processed in different plants, were investigated during storage at 2 and 10 degrees C. L. monocytogenes was isolated from 20 of the 100 packages stored at 2 degrees C (16 from lot 1, 1 from lot 2 and 3 from lot 3) and from 12 of the 65 packages stored at 10 degrees C (all from lot 1). The levels detected were 15, 20, 290, 1100 and > 1100 cfu/g in 5 packages, all belonging to lot 1, and < 10 cfu/g in the remaining samples. The high incidence of L. monocytogenes in lot 1 was assumed to be due mainly to the use of causal workers for the slicing and packing operations.