Dye-Sensitized Photocatalysis: Hydrogen Evolution and Alcohol-to-Aldehyde Oxidation without Sacrifical Electron Donor.

There is a growing interest in developing dye-sensitized photocatalytic systems (DSPs) to produce molecular hydrogen (H2 ) as alternative energy source. To improve the sustainability of this technology, we replaced the sacrificial electron donor (SED), typically an expensive and polluting chemical, with an alcohol oxidation catalyst. This study demonstrates the first dye-sensitized system using a diketopyrrolopyrrole dye covalently linked to 2,2,6,6-tetramethyl-1-piperidine-N-oxyl (TEMPO) based catalyst for simultaneous H2 evolution and alcohol-to-aldehyde transformation operating in water with visible irradiation.

Porphyrins and phthalocyanines as biomimetic tools for photocatalytic H2 production and CO2 reduction.

The increasing energy demand and environmental issues caused by the over-exploitation of fossil fuels render the need for renewable, clean, and environmentally benign energy sources unquestionably urgent. The zero-emission energy carrier, H2 is an ideal alternative to carbon-based fuels especially when it is generated photocatalytically from water. Additionally, the photocatalytic conversion of CO2 into chemical fuels can reduce the CO2 emissions and have a positive environmental and economic impact. Inspired by natural photosynthesis, plenty of artificial photocatalytic schemes based on porphyrinoids have been investigated. This review covers the recent advances in photocatalytic H2 production and CO2 reduction systems containing porphyrin or phthalocyanine derivatives. The unique properties of porphyrinoids enable their utilization both as chromophores and as catalysts. The homogeneous photocatalytic systems are initially described, presenting the various approaches for the improvement of photosensitizing activity and the enhancement of catalytic performance at the molecular level. On the other hand, for the development of the heterogeneous systems, numerous methods were employed such as self-assembled supramolecular porphyrinoid nanostructures, construction of organic frameworks, combination with 2D materials and adsorption onto semiconductors. The dye sensitization on semiconductors opened the way for molecular-based dye-sensitized photoelectrochemical cells (DSPECs) devices based on porphyrins and phthalocyanines. The research in photocatalytic systems as discussed herein remains challenging since there are still many limitations making them unfeasible to be used at a large scale application before finding a large-scale application.

Molecular materials as interfacial layers and additives in perovskite solar cells.

Solar cells based on organo-metal halide perovskites have gained unprecedented research interest over the last few years due to their low-cost solution processability, high power conversion efficiency, which has recently reached a certified value of 25.2%, and abundance of raw materials. Nevertheless, the best efficiencies remain below the Shockley-Queisser theoretical limit of 32.5% due to several losses arising from either defect traps present in the bulk of the perovskite absorber or at the device heterointerfaces. While bulk defects are detrimental for the device performance by mainly limiting the open circuit voltage, interfacial layers are also crucial. They dictate the charge transfer/transport from the perovskite layer to the collecting electrodes, hence influencing the device photocurrent, but also act as protective barriers against oxygen and moisture penetration. Molecular materials and additives are widely used to improve the bulk properties of perovskite absorbers through the formation of high-quality perovskite films with superior optoelectronic properties, and improved crystallinity, and also of electronically clean interfaces with minimum losses during charge transfer/transport. In this review, we analyze the predominant pathways that contribute to voltage and current losses due to poor interfaces and also due to non-radiative recombination losses arising from inferior perovskite morphology and its inherent polycrystalline and highly defective nature. We then discuss strategies for achieving interfacial organic and inorganic molecular materials for application as electron and hole transport layers in perovskite solar cells with ideal energy levels, high charge mobilities and improved thermal, photo, and structural stability. Moreover, the prerequisites for molecular additives to achieve dimensionality engineering, defect passivation, molecular cross-linking, interfacial energy alignment and electronic doping are thoroughly discussed. Finally, we examine prospects for future research directions and commercialization.

Photosensitizers for H2 Evolution Based on Charged or Neutral Zn and Sn Porphyrins.

We report a comparison between a series of zinc and tin porphyrins as photosensitizers for photochemical hydrogen evolution using cobaloxime complexes as molecular catalysts. Among all the chromophores tested, only the positively charged zinc porphyrin, [ZnTMePyP4+]Cl4, and the neutral tin porphyrin derivatives, Sn(OH)2TPyP, Sn(Cl2)TPP-[COOMe]4, and Sn(Cl2)TPP-[PO(OEt)2]4, were photocatalytically active. Hydrogen evolution was strongly affected by the pH value as well as the different concentrations of both the sensitizer and the catalyst. A comprehensive photophysical and electrochemical investigation was conducted in order to examine the mechanism of photocatalysis. The results derived from this study establish fundamental criteria with respect to the design and synthesis of porphyrin derivatives for their application as photosensitizers in photoinduced hydrogen evolution.

Combining Zinc Phthalocyanines, Oligo(p-Phenylenevinylenes), and Fullerenes to Impact Reorganization Energies and Attenuation Factors.

A study on electron transfer in three electron donor-acceptor complexes is reported. These architectures consist of a zinc phthalocyanine (ZnPc) as the excited-state electron donor and a fullerene (C60 ) as the ground-state electron acceptor. These complexes are brought together by axial coordination at ZnPc. The key variable in our design is the length of the molecular spacer, namely, oligo-p-phenylenevinylenes. The lack of appreciable ground-state interactions is in accordance with strong excited-state interactions, as inferred from the quenching of ZnPc centered fluorescence and the presence of a short-lived fluorescence component. Full-fledged femtosecond and nanosecond transient absorption spectroscopy assays corroborated that the ZnPc ⋅ + -C60 ⋅ - charge-separated state formation comes at the expense of excited-state interactions following ZnPc photoexcitation. At a first glance, the ZnPc ⋅ + -C60 ⋅ - charge-separated state lifetime increased from 0.4 to 86.6 ns as the electron donor-acceptor separation increased from 8.8 to 29.1 Å. A closer look at the kinetics revealed that the changes in charge-separated state lifetime are tied to a decrease in the electronic coupling element from 132 to 1.2 cm-1 , an increase in the reorganization energy of charge transfer from 0.43 to 0.63 eV, and a large attenuation factor of 0.27 Å-1 .

Sequential, Ultrafast Energy Transfer and Electron Transfer in a Fused Zinc Phthalocyanine-free-base Porphyrin-C60 Supramolecular Triad.

A supramolecular triad composed of a fused zinc phthalocyanine-free-base porphyrin dyad (ZnPc-H2 P) coordinated to phenylimidazole functionalized C60 via metal-ligand axial coordination was assembled, as a photosynthetic antenna-reaction centre mimic. The process of self-assembly resulting into the formation of C60 Im:ZnPc-H2 P supramolecular triad was probed by proton NMR, UV-Visible and fluorescence experiments at ambient temperature. The geometry and electronic structures were deduced from DFT calculations performed at the B3LYP/6-31G(dp) level. Electrochemical studies revealed ZnPc to be a better electron donor compared to H2 P, and C60 to be the terminal electron acceptor. Fluorescence studies of the ZnPc-H2 P dyad revealed excitation energy transfer from 1 H2 P* to ZnPc within the fused dyad and was confirmed by femtosecond transient absorption studies. Similar to that reported earlier for the fused ZnPc-ZnP dyad, the energy transfer rate constant, kENT was in the order of 1012  s-1 in the ZnPc-H2 P dyad indicating an efficient process as a consequence of direct fusion of the two π-systems. In the presence of C60 Im bound to ZnPc, photoinduced electron transfer leading to H2 P-ZnPc.+ :ImC60.- charge separated state was observed either by selective excitation of ZnPc or H2 P. The latter excitation involved an energy transfer followed by electron transfer mechanism. Nanosecond transient absorption studies revealed that the lifetime of charge separated state persists for about 120 ns indicating charge stabilization in the triad.

Effect of the triazole ring in zinc porphyrin-fullerene dyads on the charge transfer processes in NiO-based devices.

Herein, the synthesis of three covalently linked donor-acceptor zinc porphyrin-fullerene (ZnP-C60) dyads (C60trZnPCOOH, C60trZnPtrCOOH and C60ZnPCOOH) is described, and their application as sensitizers in NiO-based dye-sensitized solar cells (DSCs) is discussed. To the best of our knowledge, this is the first example where covalently linked ZnP-C60 dyads have been used as chromophores in NiO-based DSCs. In an effort to examine whether the distance of the chromophore from the electron acceptor entity and/or the NiO surface affects the performance of the cells, a triazole ring was introduced as a spacer between ZnP and the two peripheral units C60 and -COOH. The triazole ring was inserted between ZnP and C60 in dyad C60trZnPCOOH, whereas both the anchoring group and C60 were connected to ZnP through triazole spacers in C60trZnPtrCOOH, and dyad C60ZnPCOOH did not contain any triazole linker. Photophysical investigation performed by ultrafast transient absorption spectroscopy in solution and on the NiO surface demonstrated that all the porphyrin-fullerene dyads exhibited long-lived charge-separated states due to electron shifts from the reduced porphyrin core to C60. The transient experiments performed in solution showed that the presence of triazole ring influenced the photophysical properties of the dyads C60trZnPCOOH and C60trZnPtrCOOH and in particular, increased the lifetime of the charge-separated states compared to that of the C60ZnPCOOH dyad. On the other hand, the corresponding studies on the NiO surface proved that the triazole spacer has a rather moderate impact on the charge separation (NiO-ZnP˙+-C60˙-) and charge recombination (NiO-3*ZnP-C60) rate constants. All three dyads exhibited enhanced performance in terms of photovoltaic measurements with more than threefold increase compared to the reference compound PhtrZnPCOOH in which the C60 acceptor is absent. Two different electrolytes were examined (I3-/I- and CoIII/II) and in most cases, the presence of the triazole ring enhanced their photovoltaic performance. The best performing dyad in I3-/I- was C60trZnPCOOH (PCE = 0.076%); in CoIII/II, the best performing dyad was C60trZnPtrCOOH (PCE = 0.074%).

Multi-electron reduction of Wells-Dawson polyoxometalate films onto metallic, semiconducting and dielectric substrates.

The investigation of conditions allowing multi-electron reduction and reoxidation of polyoxometalate (POM) films onto solid substrates is considered an issue of critical importance for their successful incorporation in electronic devices, different types of sensors and catalytic systems. In the present paper, the rich multi-electron redox chemistry of films of Wells-Dawson ammonium salts, namely (NH4)6P2Mo18O62 and (NH4)6P2W18O62, on top of metallic (Al), semiconducting (ITO) and dielectric (SiO2) substrates under ambient conditions is investigated. The respective Keggin heteropolyacids, H3PMo12O40 and H3PW12O40, are also investigated for comparison. On Al substrates, the Wells-Dawson ammonium salts are found to be significantly more reduced (4-6e-) compared to the respective Keggin heteropolyacids (∼2e-), in accordance with their deeper lying lowest unoccupied molecular orbital (LUMO) level. Subsequent thermal treatment in air results in reoxidation of the initially highly reduced POM films. Similar behavior is found on ITO substrates, but in initially less reduced (2-4e-) Wells-Dawson POM films. On the other hand, on SiO2 substrates, the thermal reduction of (NH4)6P2Mo18O62 film is observed and attributed to the thermal oxidation of ammonium counterions by [P2Mo18O62]6- anions. Overall, the multi-electron reduction of Wells-Dawson ammonium salts onto metallic and semiconducting substrates (Al, ITO) is determined by the relative position of the LUMO level of POMs in relation to the Fermi level of the substrate (i.e. substrate work function) and affected in a synergistic way by the presence of ammonium counterions. In contrast, on dielectric substrates (SiO2) the reduction of Wells-Dawson POMs ((NH4)6P2Mo18O62) is attributed only to the oxidation of ammonium counterions.

Interfacing tetrapyridyl-C60 with porphyrin dimers via π-conjugated bridges: artificial photosynthetic systems with ultrafast charge separation.

We report on the synthesis, characterization and photophysical properties of a donor-bridge-acceptor supramolecular hybrid system, consisting of a tetrapyridyl fullerene derivative (C60-tpyr) as electron acceptor, with the four pyridyl groups as part of oligophenyleneethynylene/phenylenevinylene bridges, and zinc porphyrin dimers (ZnP)2 as electron donor species. Based on the metal-to-ligand coordination between the zinc metal centers of (ZnP)2 and the four pyridyl entities of C60-tpyr, a strong binding constant (5 × 105 M-1) for the formation of C60-tpyr·[(ZnP)2]2 was evidenced. Insights into the electronic interactions between the photoactive (ZnP)2 units and C60-tpyr emanated from complementary physicochemical assays, which were further supported by theoretical calculations. Notably, the absorption and emission titration assays revealed strong interactions between the electron donor and acceptor species within C60-tpyr·[(ZnP)2]2, both in the ground and excited state. Moreover, femtosecond and nanosecond laser photolysis transient absorption measurements were performed and provided solid evidence for intramolecular electron transfer processes derived from the singlet excited state of (ZnP)2 to C60-tpyr. Comparison with systems in which either four monomeric zinc porphyrins (ZnP) were complexed with C60-tpyr or a (ZnP)2 was coordinated with a dipyridylfullerene revealed the beneficial role of C60-tpyr in increasing the lifetime of charge-separation.

Supramolecular complex of a fused zinc phthalocyanine-zinc porphyrin dyad assembled by two imidazole-C60 units: ultrafast photoevents.

A new zinc phthalocyanine-zinc porphyrin dyad (ZnPc-ZnP) fused through a pyrazine ring has been synthesized as a receptor for imidazole-substituted C60 (C60Im) electron acceptor. Self-assembly via metal-ligand axial coordination and the pertinent association constants in solution were determined by 1H-NMR, UV-Vis and fluorescence titration experiments at room temperature. The designed host was able to bind up to two C60Im electron acceptor guest molecules to yield C60Im:ZnPc-ZnP:ImC60 donor-acceptor supramolecular complex. The spectral data showed that the two binding sites behave independently with binding constants similar in magnitude. Steady-state fluorescence studies were indicative of an efficient singlet-singlet energy transfer from zinc porphyrin to zinc phthalocyanine within the fused dyad. Accordingly, the transient absorption studies covering a wide timescale of femto-to-milli seconds revealed ultrafast energy transfer from 1ZnP* to ZnPc (kEnT ∼ 1012 s-1) in the fused dyad. Further, a photo induced electron transfer was observed in the supramolecularly assembled C60Im:ZnPc-ZnP:ImC60 donor-acceptor complex leading to charge separated states, which persisted for about 200 ns.

Axially Assembled Photosynthetic Antenna-Reaction Center Mimics Composed of Boron Dipyrromethenes, Aluminum Porphyrin, and Fullerene Derivatives.

Sequential photoinduced energy transfer followed by electron transfer leading to the formation of charge separated states in a newly assembled series of supramolecular triads comprised of boron dipyrromethenes (BODIPY or BDP), aluminum porphyrin (AlTPP) and C60 is demonstrated. In the present strategy, the energy donor (BDP) and electron acceptor (C60) were axially positioned to the plane of AlTPP via the central metal. The structural integrity of the newly synthesized compounds and self-assembled systems were fully established using spectral, electrochemical and computational methods. Thermodynamic feasibility of energy transfer from 1BDP* to AlTPP and subsequent electron transfer from 1AlTPP* to generate BDP-AlTPP•+-C60•- charge separated states was derived from free-energy calculations. Occurrence of ultrafast energy transfer from 1BDP* to AlTPP was established from studies involving steady-state and time-resolved emission, as well as femtosecond transient spectroscopic techniques. The BDP-AlTPP•+-C60•- charge separated states persisted for several nanoseconds prior returning to the ground state.

Corrole and Porphyrin Amino Acid Conjugates: Synthesis and Physicochemical Properties.

A series of conjugates of amino acids with porphyrins and corroles was synthesized. Their self-assembling ability under defined conditions was investigated by scanning electron microscopy. The morphology and photophysical properties of these molecules were studied by absorption and fluorescence spectroscopy in solid, liquid, and self-assembled forms. We observed that both corrole and porphyrin conjugated with the l-phenylalanine-l-phenylalanine peptide to form spherical nanostructures with bathochromic shifts in the emission spectra, indicating the formation of aggregates. These aggregates are characterized by the impressive absorption of light over nearly the whole visible range. The broadening of all bands was particularly strong in the case of corroles. The fluorescence lifetimes of self-assembled species were longer as compared to the solid-state form.

A new approach for the photosynthetic antenna-reaction center complex with a model organized around an s-triazine linker.

Two new artificial mimics of the photosynthetic antenna-reaction center complex have been designed and synthesized (BDP-H2 P-C60 and BDP-ZnP-C60). The resulting electron-donor/acceptor conjugates contain a porphyrin (either in its free-base form (H2P) or as Zn-metalated complex (ZnP)), a boron dipyrrin (BDP), and a fulleropyrrolidine possessing, as substituent of the pyrrolidine nitrogen, an ethylene glycol chain terminating in an amino group C60-X-NH2 (X=spacer). In both cases, the three different components were connected by s-triazine through stepwise substitution reactions of cyanuric chloride. In addition to the facile synthesis, the star-type arrangement of the three photo- and redox-active components around the central s-triazine unit permits direct interaction between one another, in contrast to reported examples in which the three components are arranged in a linear fashion. The energy- and electron-transfer properties of the resulting electron-donor/acceptor conjugates were investigated by using UV/Vis absorption and emission spectroscopy, cyclic voltammetry, and femtosecond transient absorption spectroscopy. Comparison of the absorption spectra and cyclic voltammograms of BDP-H2P-C60 and BDP-ZnP-C60 with those of BDP-H2P, BDP-ZnP and BDP-C60, which were used as references, showed that the spectroscopic and electrochemical properties of the individual constituents are basically retained, although some appreciable shifts in terms of absorption indicate some interactions in the ground state. Fluorescence lifetime measurements and transient absorption experiments helped to elucidate the antenna function of BDP, which upon selective excitation undergoes a rapid and efficient energy transfer from BDP to H2P or ZnP. This is then followed by an electron transfer to C60, yielding the formation of the singlet charge-separated states, namely BDP-H2(·+) -C60(·-) and BDP-ZnP(·+)-C60(·-). As such, the sequence of energy transfer and electron transfer in the present models mimics the events of natural photosynthesis.

Amphiphilic Chlorin-ß-cyclodextrin Conjugates in Photo-Triggered Drug Delivery: The Role of Aggregation.

Conjugates of chlorins with ß-cyclodextrin connected either directly or via a flexible linker were prepared. In aqueous medium these amphiphilic conjugates were photostable, produced singlet oxygen at a rate similar to clinically used temoporfin and formed irregular nanoparticles via aggregation. Successful loading with the chemotherapeutic drug tamoxifen was evidenced in solution by the UV-Vis spectral changes and dynamic light scattering profiles. Incubation of MCF-7 cells with the conjugates revealed intense spotted intracellular fluorescence suggestive of accumulation in endosome/lysosome compartments, and no dark toxicity. Incubation with the tamoxifen-loaded conjugates revealed also practically no dark toxicity. Irradiation of cells incubated with empty conjugates at 640 nm and 4.18 J/cm2 light fluence caused >50 % cell viability reduction. Irradiation following incubation with tamoxifen-loaded conjugates resulted in even higher toxicity (74 %) indicating that the produced reactive oxygen species had triggered tamoxifen release in a photochemical internalization (PCI) mechanism. The chlorin-ß-cyclodextrin conjugates displayed less-lasting effects with time, compared to the corresponding porphyrin-ß-cyclodextrin conjugates, possibly due to lower tamoxifen loading of their aggregates and/or their less effective lodging in the cell compartments' membranes. The results suggest that further to favorable photophysical properties, other parameters are important for the in vitro effectiveness of the photodynamic systems.

Antimicrobial Potency of Fmoc-Phe-Phe Dipeptide Hydrogels with Encapsulated Porphyrin Chromophores Is a Promising Alternative in Antimicrobial Resistance.

Antimicrobial resistance (AMR) poses a significant global health risk as a consequence of misuse of antibiotics. Owing to the increasing antimicrobial resistance, it became imperative to develop novel molecules and materials with antimicrobial properties. Porphyrins and metalloporphyrins are compounds which present antimicrobial properties especially after irradiation. As a consequence, porphyrinoids have recently been utilized as antimicrobial agents in antimicrobial photodynamic inactivation in bacteria and other microorganisms. Herein, we report the encapsulation of porphyrins into peptide hydrogels which serve as delivery vehicles. We selected the self-assembling Fmoc-Phe-Phe dipeptide, a potent gelator, as a scaffold due to its previously reported biocompatibility and three different water-soluble porphyrins as photosensitizers. We evaluated the structural, mechanical and in vitro degradation properties of these hydrogels, their interaction with NIH3T3 mouse skin fibroblasts, and we assessed their antimicrobial efficacy against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) bacteria. We found out that the hydrogels are cytocompatible and display antimicrobial efficiency against both strains with the zinc porphyrins being more efficient. Therefore, these hydrogels present a promising alternative for combating bacterial infections in the face of growing AMR concerns.

Visible light-driven O2 reduction by a porphyrin-laccase system.

Several recent studies have shown that the combination of photosensitizers with metalloenzymes can support a light-driven multielectron reduction of molecules such as CO(2) or HCN. Here we show that the association of the zinc tetramethylpyridinium porphyrin (ZnTMPyP(4+)) photosensitizer with the multicopper oxidase (MCO) laccase allows to link the oxidation of an organic molecule to the four electrons reduction of dioxygen into water. The enzyme is photoreduced within minutes with porphyrin/enzyme ratio as low as 1:40. With a 1:1 ratio, the dioxygen consumption rate is 1.7 µmol L(-1) s(-1). Flash photolysis experiments support the formation of the triplet excited state of ZnTMPyP(4+) which reduces the enzyme to form a radical cation of the porphyrin with a k(ET) ≈ 10(7) s(-1) M(-1). The long-lived triplet excited state of the ZnTMPyP(4+) (τ(0) = 0.72 ms) accounts for a substantial electron-transfer quantum yield, φ(ET) = 0.35. Consequently, the enzyme-dependent photo-oxidation of the electron donor occurs with a turnover of 8 min(-1) for the one-electron oxidation process, thereby supporting the suitability of such enzyme/sensitizer hybrid systems for aerobic photodriven transformations on substrates. This study is the first example of a phorphyrin-sensitized four-electron reduction of an enzyme of the MCO family, leading to photoreduction of dioxygen into water.

Efficient sensitization of dye-sensitized solar cells by novel triazine-bridged porphyrin-porphyrin dyads.

Two novel porphyrin-porphyrin dyads, the symmetrical Zn[Porph]-Zn[Porph] (2) and unsymmetrical Zn[Porph]-H2[Porph] (4), where Zn[Porph] and H2[Porph] are the metalated and free-base forms of 5-(4-aminophenyl)-10,15,20-triphenylporphyrin, respectively, in which two porphyrin units are covalently bridged by 1,3,5-triazine, have been synthesized via the stepwise amination of cyanuric chloride. The dyads are also functionalized by a terminal carboxylic acid group of a glycine moiety attached to the triazine group. Photophysical measurements of 2 and 4 showed broaden and strengthened absorptions in their visible spectra, while electrochemistry experiments and density functional theory calculations revealed negligible interaction between the two porphyrin units in their ground states but appropriate frontier orbital energy levels for use in dye-sensitized solar cells (DSSCs). The 2- and 4-based solar cells have been fabricated and found to exhibit power conversion efficiencies (PCEs) of 3.61% and 4.46%, respectively (under an illumination intensity of 100 mW/cm(2) with TiO2 films of 10 µm thickness). The higher PCE value of the 4-based DSSC, as revealed by photovoltaic measurements (J-V curves) and incident photon-to-current conversion efficiency (IPCE) spectra of the two cells, is attributed to its enhanced short-circuit current (J(sc)) under illumination, high open-circuit voltage (V(oc)), and fill factor (FF) values. Electrochemical impedance spectra demonstrated shorter electron-transport time (τd), longer electron lifetime (τe), and high charge recombination resistance for the 4-based cell, as well as larger dye loading onto TiO2.

Light-induced hydrogen production from water using nickel(II) catalysts and N-doped carbon-dot photosensitizers: catalytic efficiency enhancement by increase of catalyst nuclearity.

Solar energy conversion to chemical energy via light-induced H2O splitting to O2 and H2 is considered to be a promising solution to meet the growing global energy demands. To make this transformation economically viable, it is necessary to develop sustainable photocatalytic systems. Herein, we present an efficient photocatalytic H2 production system which relies on components comprised of low-cost and high-abundance elements. In particular, a series of mononuclear complexes [Ni(LNS)3]- and [Ni(N^N)(LNS)2] and a hexanuclear complex [Ni(LNS)2]6 (N^N = diimine and LNS- = heterocyclic thioamidate with different group-substituents) were synthesized and utilized as catalysts, in combination with N-doped carbon dots as photosensitizer, for efficient H2 evolution from aqueous protons. Differences in H2 production efficiency were observed among the studied Ni(II) catalysts, with complexes bearing ligands with stronger electron-donating ability exhibiting higher catalytic activity. A remarkable catalytic efficiency enhancement was observed for the hexanuclear complex, with catalyst loadings lower than those of the mononuclear Ni(II) complexes, affording TONs >1550 (among the highest values reported for photocatalytic systems of similar type operating in H2O). These data provide an indication of catalytic cooperativity between the metal centers of the hexanuclear complex, and demonstrate the crucial role of atomically precise polynuclear Ni(II) catalysts in light-induced H2 production, a result that can guide future catalyst design towards the development of highly efficient, low-cost and environmentally benign photocatalytic systems.

Highly efficient light-driven hydrogen evolution utilizing porphyrin-based nanoparticles.

We developed dye-sensitized photocatalytic systems (DSPs) by utilizing porphyrins as a photosensitizer (PS) or as a photosensitizer-catalyst (PS/CAT) upon their chemisorption onto platinum-doped titanium dioxide nanoparticles (Pt-TiO2 NPs). The DSPs coated with Pt-Tc3CP (PS/CAT entity) exhibited a record-high stability (25 500 TONs) and H2 evolution activity (707 mmol g-1 h-1) compared to similar DSPs in the literature.

Delivery of Porphyrins Through Self-Assembling Peptide Hydrogels for Accelerated Healing of Experimental Skin Defects In Vivo.

INTRODUCTION: The care and healing of skin defects resulting from different causes has been the object of research to achieve rapid and complete skin regeneration. Hydrogels have been used for their ability to maintain hydration during wound healing, absorb wound exudate, and cover the underlying tissue without adherence while being transparent. In this study, we evaluated the efficacy of a hydrogel (H) with encapsulated porphyrin (H+P) on a rat model of surgically-induced skin defects. METHODS: Four round 6 mm diameter skin defects were performed under general anesthesia on the dorsal area of 24 three-month-old "Young" and 24 twelve-month-old "Mature" male rats. Each age group was separated into the Control, H, and H+P groups, n=8 each, where no therapy, H, or H+P was respectively applied daily for 20 days. Digital photographs and skin biopsies were taken on the third, seventh, 10th, and 20th postoperative days and evaluated by planimetry, histology, and immunohistochemistry. RESULTS: Planimetry results demonstrated significantly decreased perimeter, diameter, and area measurements (p<0.005) of group H+P compared to Control and H groups on days 10 and 20 in the young rats, while in the mature rats, the significant differences were evident earlier (perimeter third day p<0.05; diameter and area seventh day p<0.05 and p<0.005, respectively vs. H). Granulation and scar tissue formation were also reduced in the H+P groups although they were not statistically significant. CONCLUSIONS: The application of H+P on the skin defects benefited the healing process in both young and mature animal groups, as evidenced by the statistically significant findings of planimetry. The beneficial healing process was more pronounced in the mature animals, both in the level of statistical significance as well as regarding time (evident already on the third day of healing), probably due to porphyrin assisting the reduced healing rate, which is observed in organisms of advanced age.