Steering the Reconstruction of Oxide-Derived Cu by Secondary Metal for Electrosynthesis of n-Propanol from CO.

As fuel and an important chemical feedstock, n-propanol is highly desired in electrochemical CO2/CO reduction on Cu catalysts. However, the precise regulation of the Cu localized structure is still challenging and poorly understood, thus hindering the selective n-propanol electrosynthesis. Herein, by decorating Au nanoparticles (NPs) on CuO nanosheets (NSs), we present a counterintuitive transformation of CuO into undercoordinated Cu sites locally around Au NPs during CO reduction. In situ spectroscopic techniques reveal the Au-steered formation of abundant undercoordinated Cu sites during the removal of oxygen on CuO. First-principles accuracy molecular dynamic simulation demonstrates that the localized Cu atoms around Au tend to rearrange into disordered layer rather than a Cu (111) close-packed plane observed on bare CuO NSs. These Au-steered undercoordinated Cu sites facilitate CO binding, enabling selective electroreduction of CO into n-propanol with a high Faradaic efficiency of 48% in a flow cell. This work provides new insight into the regulation of the oxide-derived catalysts reconstruction with a secondary metal component.

Electrochemical Redox Conversion of Formate to CO via Coupling Fe-Co Layered Double Hydroxides and Au Catalysts.

Formate has been considered an inactive molecule and thus cannot be further reduced under CO2 reduction conditions, which limits its widespread application as feedstock. Here we present an electrochemical redox conversion of formate to CO through the potential-dependent generation of carbon dioxide radical anions (CO2 ⋅- ) on Fe-Co layered double hydroxides (Fe-Co LDHs) and the subsequent reduction of CO2 ⋅- to CO on Au catalysts. We present an electrodeposition protocol for the synthesis of Fe-Co LDHs with precise composition control and find that Fe1 Co4 exhibits a promising potential window for CO2 ⋅- formation between 1.14 and 1.4 V and an optimized potential at 1.24 V at a neutral pH condition. We further determined the formation of CO2 ⋅- at 1.24 V via electron paramagnetic resonance and CO2 at >1.4 V through differential electrochemical mass spectrometry. This work provides a redox chemistry route for converting formate into CO through a coupled slit parallel-plate electrode system.

Enabling Specific Photocatalytic Methane Oxidation by Controlling Free Radical Type.

Selective CH4 oxidation to CH3OH or HCHO with O2 in H2O under mild conditions provides a desired sustainable pathway for synthesis of commodity chemicals. However, manipulating reaction selectivity while maintaining high productivity remains a huge challenge due to the difficulty in the kinetic control of the formation of a desired oxygenate against its overoxidation. Here, we propose a highly efficient strategy, based on the precise control of the type of as-formed radicals by rational design on photocatalysts, to achieve both high selectivity and high productivity of CH3OH and HCHO in CH4 photooxidation for the first time. Through tuning the band structure and the size of active sites (i.e., single atoms or nanoparticles) in our Au/In2O3 catalyst, we show alternative formation of two important radicals, •OOH and •OH, which leads to distinctly different reaction paths to the formation of CH3OH and HCHO, respectively. This approach gives rise to a remarkable HCHO selectivity and yield of 97.62% and 6.09 mmol g-1 on In2O3-supported Au single atoms (Au1/In2O3) and an exceptional CH3OH selectivity and yield of 89.42% and 5.95 mmol g-1 on In2O3-supported Au nanoparticles (AuNPs/In2O3), respectively, upon photocatalytic CH4 oxidation for 3 h at room temperature. This work opens a new avenue toward efficient and selective CH4 oxidation by delicate design of composite photocatalysts.

Criteria for Efficient Photocatalytic Water Splitting Revealed by Studying Carrier Dynamics in a Model Al-doped SrTiO3 Photocatalyst.

Overall water splitting (OWS) using semiconductor photocatalysts is a promising method for solar fuel production. Achieving a high quantum efficiency is one of the most important prerequisites for photocatalysts to realize high solar-to-fuel efficiency. In a recent study (Nature 2020, 58, 411-414), a quantum efficiency of almost 100 % has been achieved in an aluminum-doped strontium titanate (SrTiO3 : Al) photocatalyst. Herein, using the SrTiO3 : Al as a model photocatalyst, we reveal the criteria for efficient photocatalytic water splitting by investigating the carrier dynamics through a comprehensive photoluminescence study. It is found that the Al doping suppresses the generation of Ti3+ recombination centers in SrTiO3 , the surface band bending facilitates charge separation, and the in situ photo-deposited Rh/Cr2 O3 and CoOOH co-catalysts render efficient charge extraction. By suppressing photocarrier recombination and establishing a facile charge separation and extraction mechanism, high quantum efficiency can be achieved even on photocatalysts with a very short (sub-ns) intrinsic photocarrier lifetime, challenging the belief that a long carrier lifetime is a fundamental requirement. Our findings could provide guidance on the design of OWS photocatalysts toward more efficient solar-to-fuel conversion.

Nickel Iron Diselenide for Highly Efficient and Selective Electrocatalytic Conversion of Methanol to Formate.

The electro-oxidation of methanol to formate is an interesting example of the potential use of renewable energies to add value to a biosourced chemical commodity. Additionally, methanol electro-oxidation can replace the sluggish oxygen evolution reaction when coupled to hydrogen evolution or to the electroreduction of other biomass-derived intermediates. But the cost-effective realization of these reaction schemes requires the development of efficient and low-cost electrocatalysts. Here, a noble metal-free catalyst, Ni1- x Fex Se2 nanorods, with a high potential for an efficient and selective methanol conversion to formate is demonstrated. At its optimum composition, Ni0.75 Fe0.25 Se2 , this diselenide is able to produce 0.47 mmol cm-2  h-1 of formate at 50 mA cm-2 with a Faradaic conversion efficiency of 99%. Additionally, this noble-metal-free catalyst is able to continuously work for over 50 000 s with a minimal loss of efficiency, delivering initial current densities above 50 mA cm-2 and 2.2 A mg-1 in a 1.0 m KOH electrolyte with 1.0 m methanol at 1.5 V versus reversible hydrogen electrode. This work demonstrates the highly efficient and selective methanol-to-formate conversion on Ni-based noble-metal-free catalysts, and more importantly it shows a very promising example to exploit the electrocatalytic conversion of biomass-derived chemicals.

Selective Methanol-to-Formate Electrocatalytic Conversion on Branched Nickel Carbide.

A methanol economy will be favored by the availability of low-cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO2 as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost-efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway.

Phase-Selective Syntheses of Cobalt Telluride Nanofleeces for Efficient Oxygen Evolution Catalysts.

Cobalt-based nanomaterials have been intensively explored as promising noble-metal-free oxygen evolution reaction (OER) electrocatalysts. Herein, we report phase-selective syntheses of novel hierarchical CoTe2 and CoTe nanofleeces for efficient OER catalysts. The CoTe2 nanofleeces exhibited excellent electrocatalytic activity and stablity for OER in alkaline media. The CoTe2 catalyst exhibited superior OER activity compared to the CoTe catalyst, which is comparable to the state-of-the-art RuO2 catalyst. Density functional theory calculations showed that the binding strength and lateral interaction of the reaction intermediates on CoTe2 and CoTe are essential for determining the overpotential required under different conditions. This study provides valuable insights for the rational design of noble-metal-free OER catalysts with high performance and low cost by use of Co-based chalcogenides.

Promoting Photochemical Water Oxidation with Metallic Band Structures.

The development of economic water oxidation catalysts is a key step toward large-scale water splitting. However, their current exploration remains empirical to a large extent. Elucidating the correlations between electronic properties and catalytic activity is crucial for deriving general and straightforward catalyst design principles. Herein, strongly correlated electronic systems with abundant and easily tunable electronic properties, namely La(1-x)Sr(x)BO3 perovskites and La(2-x)Sr(x)BO4 layered perovskites (B = Fe, Co, Ni, or Mn), were employed as model systems to identify favorable electronic structures for water oxidation. We established a direct correlation between the enhancement of catalytic activity and the insulator to metal transition through tuning the electronic properties of the target perovskite families via the La(3+)/Sr(2+) ratio. Their improved photochemical water oxidation performance was clearly linked to the increasingly metallic character. These electronic structure-activity relations provide a promising guideline for constructing efficient water oxidation catalysts.

Size-Controlled Synthesis of Sub-10 nm PtNi3 Alloy Nanoparticles and their Unusual Volcano-Shaped Size Effect on ORR Electrocatalysis.

Dealloyed Pt bimetallic core-shell catalysts derived from low-Pt bimetallic alloy nanoparticles (e.g, PtNi3 ) have recently shown unprecedented activity and stability on the cathodic oxygen reduction reaction (ORR) under realistic fuel cell conditions and become today's catalyst of choice for commercialization of automobile fuel cells. A critical step toward this breakthrough is to control their particle size below a critical value (≈10 nm) to suppress nanoporosity formation and hence reduce significant base metal (e.g., Ni) leaching under the corrosive ORR condition. Fine size control of the sub-10 nm PtNi3 nanoparticles and understanding their size dependent ORR electrocatalysis are crucial to further improve their ORR activity and stability yet still remain unexplored. A robust synthetic approach is presented here for size-controlled PtNi3 nanoparticles between 3 and 10 nm while keeping a constant particle composition and their size-selected growth mechanism is studied comprehensively. This enables us to address their size-dependent ORR activities and stabilities for the first time. Contrary to the previously established monotonic increase of ORR specific activity and stability with increasing particle size on Pt and Pt-rich bimetallic nanoparticles, the Pt-poor PtNi3 nanoparticles exhibit an unusual "volcano-shaped" size dependence, showing the highest ORR activity and stability at the particle sizes between 6 and 8 nm due to their highest Ni retention during long-term catalyst aging. The results of this study provide important practical guidelines for the size selection of the low Pt bimetallic ORR electrocatalysts with further improved durably high activity.

Carbon monoxide-assisted size confinement of bimetallic alloy nanoparticles.

Colloid-based chemical synthesis methods of bimetallic alloy nanoparticles (NPs) provide good monodispersity, yet generally show a strong variation of the resulting mean particle size with alloy composition. This severely compromises accurate correlation between composition of alloy particles and their size-dependent properties. To address this issue, a general CO adsorption-assisted capping ligand-free solvothermal synthesis method is reported which provides homogeneous bimetallic NPs with almost perfectly constant particle size over an unusually wide compositional range. Using Pt-Ni alloy NPs as an example, we show that variation of the reaction temperature between 160 and 240 °C allows for precise control of the resulting alloy particle bulk composition between 15 and 70 atomic % Ni, coupled with a constant mean particle size of ∼4 nm. The size-confining and Ni content-controlling role of CO during the nucleation and growth processes are investigated and discussed. Data suggest that size-dependent CO surface chemisorption and reversible Ni-carbonyl formation are key factors for the achievement of a constant particle size and temperature-controlled Ni content. To demonstrate the usefulness of the independent control of size and composition, size-deconvoluted relations between composition and electrocatalytic properties are established. Refining earlier reports, we uncover intrinsic monotonic relations between catalytic activity and initial Ni content, as expected from theoretical considerations.

Compositional segregation in shaped Pt alloy nanoparticles and their structural behaviour during electrocatalysis.

Shape-selective monometallic nanocatalysts offer activity benefits based on structural sensitivity and high surface area. In bimetallic nanoalloys with well-defined shape, site-dependent metal surface segregation additionally affects the catalytic activity and stability. However, segregation on shaped alloy nanocatalysts and their atomic-scale evolution is largely unexplored. Exemplified by three octahedral PtxNi1-x alloy nanoparticle electrocatalysts with unique activity for the oxygen reduction reaction at fuel cell cathodes, we reveal an unexpected compositional segregation structure across the {111} facets using aberration-corrected scanning transmission electron microscopy and electron energy-loss spectroscopy. In contrast to theoretical predictions, the pristine PtxNi1-x nano-octahedra feature a Pt-rich frame along their edges and corners, whereas their Ni atoms are preferentially segregated in their {111} facet region. We follow their morphological and compositional evolution in electrochemical environments and correlate this with their exceptional catalytic activity. The octahedra preferentially leach in their facet centres and evolve into 'concave octahedra'. More generally, the segregation and leaching mechanisms revealed here highlight the complexity with which shape-selective nanoalloys form and evolve under reactive conditions.

Engineering interface and surface of noble metal nanoparticle nanotubes toward enhanced catalytic activity for fuel cell applications.

In order for fuel cells to have commercial viability as alternative fuel sources, researchers need to develop highly active and robust fuel cell electrocatalysts. In recent years, the focus has been on the design and synthesis of novel catalytic materials with controlled interface and surface structures. Another goal is to uncover potential catalytic activity and selectivity, as well as understand their fundamental catalytic mechanisms. Scientists have achieved great progress in the experimental and theoretical investigation due to the urgent demand for broad commercialization of fuel cells in automotive applications. However, there are still three main problems: cost, performance, and stability. To meet these targets, the catalyst needs to have multisynergic functions. In addition, the composition and structure changes of the catalysts during the reactions still need to be explored. Activity in catalytic nanomaterials is generally controlled by the size, shape, composition, and interface and surface engineering. As such, one-dimensional nanostructures such as nanowires and nanotubes are of special interest. However, these structures tend to lose the nanoparticle morphology and inhibit the use of catalysts in both fuel cell anodes and cathodes. In 2003, Rubinstein and co-workers proposed the idea of nanoparticle nanotubes (NNs), which combine the geometry of nanotubes and the morphology of nanoparticles. This concept gives both the high surface-to-volume ratio and the size effect, which are both appealing in electrocatalyst design. In this Account, we describe our developments in the construction of highly active NNs with unique surface and heterogeneous interface structures. We try to clarify enhanced activity and stability in catalytic systems by taking into account the activity impact factors. We briefly introduce material structural effects on the electrocatalytic reactivity including metal oxide/metal and metal/metal interfaces, dealloyed pure Pt, and mixed Pt/Pd surfaces. In addition, we discuss the geometric structure and surface composition changes and evolutions on the activity, selectivity, and stability under fuel cell operation conditions. We expect that these nanostructured materials with particular nanostructured characteristics, physical and chemical properties, and remarkable structure changes will offer new opportunities for wide scientific communities.

Key Role of Cations in Stabilizing Hydrogen Radicals for CO2-to-CO Conversion via a Reverse Water-Gas Shift Reaction.

Electrochemically converting CO2 into valuable chemicals and fuels in acidic media is argued as a promising energy- and carbon-efficient route. Although several key roles of alkali cations have been unveiled, the alkali cation trends for CO2 reduction remain largely elusive. With decreasing cation size from Cs+ to Li+, here we show that the apparent proton diffusion coefficient in 3.0 M Li+ is tens-fold lower than in 3.0 M K+ and 3.0 M Cs+ acidic electrolytes. Although Li+ has the strongest inhibition ability for proton transport, it acts the worst for both the CO2-to-CO conversion and partial current density on Au catalysts. Unexpectedly, K+ with a higher proton transport performs the best for CO2-to-CO conversion. We thus revisit the roles of alkali cations and find that hydrated K+ can stabilize hydrogen radicals benefiting CO2 conversion at the electrode interface while for Li+ this is not the case. This study proposes that cation-stabilized atomic hydrogen assists in activating CO2 via a reverse water-gas shift route under electrochemical conditions.

Wnt-dependent de novo hair follicle regeneration in adult mouse skin after wounding.

The mammalian hair follicle is a complex 'mini-organ' thought to form only during development; loss of an adult follicle is considered permanent. However, the possibility that hair follicles develop de novo following wounding was raised in studies on rabbits, mice and even humans fifty years ago. Subsequently, these observations were generally discounted because definitive evidence for follicular neogenesis was not presented. Here we show that, after wounding, hair follicles form de novo in genetically normal adult mice. The regenerated hair follicles establish a stem cell population, express known molecular markers of follicle differentiation, produce a hair shaft and progress through all stages of the hair follicle cycle. Lineage analysis demonstrated that the nascent follicles arise from epithelial cells outside of the hair follicle stem cell niche, suggesting that epidermal cells in the wound assume a hair follicle stem cell phenotype. Inhibition of Wnt signalling after re-epithelialization completely abrogates this wounding-induced folliculogenesis, whereas overexpression of Wnt ligand in the epidermis increases the number of regenerated hair follicles. These remarkable regenerative capabilities of the adult support the notion that wounding induces an embryonic phenotype in skin, and that this provides a window for manipulation of hair follicle neogenesis by Wnt proteins. These findings suggest treatments for wounds, hair loss and other degenerative skin disorders.

Octahedral PtNi nanoparticle catalysts: exceptional oxygen reduction activity by tuning the alloy particle surface composition.

We demonstrate how shape selectivity and optimized surface composition result in exceptional oxygen reduction activity of octahedral PtNi nanoparticles (NPs). The alloy octahedra were obtained by utilizing a facile, completely surfactant-free solvothermal synthesis. We show that the choice of precursor ligands controls the shape, while the reaction time tunes the surface Pt:Ni composition. The 9.5 nm sized PtNi octahedra reached a 10-fold surface area-specific (~3.14 mA/cm(Pt)(2)) as well as an unprecedented 10-fold Pt mass based (~1.45 A/mg(Pt)) activity gain over the state-of-art Pt electrocatalyst, approaching the theoretically predicted limits.

Ultrathin PtPdTe nanowires as superior catalysts for methanol electrooxidation.

Ultrathin and ultralong: Highly uniform, ultrathin (diameter 5-7 nm), and ultralong (aspect ratio >10(4)) PtPdTe nanowires (NWs) were synthesized by using a facile method employing Te NWs as both sacrificial templates and reducing agents. Fine-tuning of the molar ratios of Pt and Pd precursors afforded PtPdTe NWs with different compositions and enhanced electroactivity in the methanol oxidation reaction in comparison with a commercial Pt/C catalyst.

Cu+-Mediated CO Coordination for Promoting C-C Coupling for CO2 and CO Electroreduction.

Selective electrochemical upgrading of CO2 to multicarbon (C2+) products requires a C-C coupling process, yet the underlying promoting mechanism of widely involved Cu oxidation states remains largely unclear, hindering the subtle design of efficient catalysts. Herein, we unveil the critical role of Cu+ in promoting C-C coupling via coordination with a CO intermediate during electrochemical CO2 reduction. We find that, relative to other halogen anions, iodide (I-) in HCO3- electrolytes accelerates the generation of strongly oxidative hydroxyl radicals that accounts for the formation of Cu+, which can be dynamically stabilized by I- via the formation of CuI. The in situ generated CO intermediate strongly binds to CuI sites, forming nonclassical Cu(CO)n+ complexes, leading to an approximately 3.0-fold increase of C2+ Faradaic efficiency at -0.9 VRHE relative to that of I--free Cu surfaces. Accordingly, a deliberate introduction of CuI into I--containing HCO3- electrolytes for direct CO electroreduction brings about a 4.3-fold higher C2+ selectivity. This work provides insights into the role of Cu+ in C-C coupling and the enhanced C2+ selectivity for CO2 and CO electrochemical reduction.

Electron Paramagnetic Resonance Tracks Condition-Sensitive Water Radical Cation.

Oxidizing species or radicals generated in water are of vital importance in catalysis, the environment, and biology. In addition to several related reactive oxygen species, using electron paramagnetic resonance (EPR), we present a nontrapping chemical transformation pathway to track water radical cation (H2O+•) species, whose formation is very sensitive to the conditioning environments, such as light irradiation, mechanical action, and gas/chemical introduction. We reveal that H2O+• can oxidize the 5,5-dimethyl-1-pyrroline N-oxide (DMPO) to the crucial epoxy hydroxylamine (HDMP=O) intermediate, which further reacts with the hydroxyl radical (•OH) for the formation of the EPR-active sextet radical (DMPO=O•). Interestingly, we uncover that H2O+• can react with dimethyl methylphosphonate (DMMP), 2-methyl-2-nitrosopropane (MNP), 5-tert-butoxycarbonyl-5-methyl-1-pyrroline N-oxide (BMPO), and α-phenyl-N-tert-butylnitrone (PBN) which contain a double-bond structure to produce corresponding derivatives as well. It is thus expected that both H2O+• and •OH are ubiquitous in nature and in various water-containing experimental systems. These findings provide a novel perspective on radicals for water redox chemistry.

Non-covalent ligand-oxide interaction promotes oxygen evolution.

Strategies to generate high-valence metal species capable of oxidizing water often employ composition and coordination tuning of oxide-based catalysts, where strong covalent interactions with metal sites are crucial. However, it remains unexplored whether a relatively weak "non-bonding" interaction between ligands and oxides can mediate the electronic states of metal sites in oxides. Here we present an unusual non-covalent phenanthroline-CoO2 interaction that substantially elevates the population of Co4+ sites for improved water oxidation. We find that phenanthroline only coordinates with Co2+ forming soluble Co(phenanthroline)2(OH)2 complex in alkaline electrolytes, which can be deposited as amorphous CoOxHy film containing non-bonding phenanthroline upon oxidation of Co2+ to Co3+/4+. This in situ deposited catalyst demonstrates a low overpotential of 216 mV at 10 mA cm-2 and sustainable activity over 1600 h with Faradaic efficiency above 97%. Density functional theory calculations reveal that the presence of phenanthroline can stabilize CoO2 through the non-covalent interaction and generate polaron-like electronic states at the Co-Co center.

Self-adaptive amorphous CoOxCly electrocatalyst for sustainable chlorine evolution in acidic brine.

Electrochemical chlorine evolution reaction is of central importance in the chlor-alkali industry, but the chlorine evolution anode is largely limited by water oxidation side reaction and corrosion-induced performance decay in strong acids. Here we present an amorphous CoOxCly catalyst that has been deposited in situ in an acidic saline electrolyte containing Co2+ and Cl- ions to adapt to the given electrochemical condition and exhibits ~100% chlorine evolution selectivity with an overpotential of ~0.1 V at 10 mA cm-2 and high stability over 500 h. In situ spectroscopic studies and theoretical calculations reveal that the electrochemical introduction of Cl- prevents the Co sites from charging to a higher oxidation state thus suppressing the O-O bond formation for oxygen evolution. Consequently, the chlorine evolution selectivity has been enhanced on the Cl-constrained Co-O* sites via the Volmer-Heyrovsky pathway. This study provides fundamental insights into how the reactant Cl- itself can work as a promoter toward enhancing chlorine evolution in acidic brine.