RESUMO
PURPOSE: Early-onset degeneration of the knee is linked to genetics, overload, injury, and potentially, knee morphology. The purpose of this study is to explore the characteristics of the small medial femoral condyle, as a distinct knee morphotype, by means of a landmark-based three-dimensional (3D) analysis and statistical parametric mapping. METHODS: Sixteen knees with a small medial femoral condyle (SMC) were selected from a database of patients with distinct knee joint anatomy and 16 gender-matched knees were selected from a control group database. 3D models were generated from the medical imaging. After normalization for size, a set of pre-defined landmark-based parameters was analysed for the femur and tibia. Local shape differences were evaluated by matching all bone surfaces onto each other and comparing the distances to the mean control group bone shape. RESULTS: The small medial condyle group showed a significant association with medial compartment degeneration and had a 4% and 13% smaller medial condyle anteroposteriorly and mediolaterally, whereas the distal femur was 3% wider mediolaterally. The lateral condyle was 2% smaller anteroposteriorly and 8% wider mediolaterally. The complete tibial plateau was 3% smaller mediolaterally and the medial tibial plateau was 6% smaller. CONCLUSION: A new knee morphotype demonstrated an increased risk for medial compartment degeneration and was differentiated from a healthy control group based on the following morphological characteristics: a smaller medial femoral condyle and medial tibial plateau, a wider lateral femoral condyle and a wider distal femur on a smaller tibial plateau. This pilot study suggests a role for the SMC knee morphotype in the multifactorial process of medial compartment degeneration. LEVEL OF EVIDENCE: III.
Assuntos
Fêmur/anatomia & histologia , Articulação do Joelho/anatomia & histologia , Osteoartrite/patologia , Adulto , Epífises/anatomia & histologia , Epífises/diagnóstico por imagem , Feminino , Fêmur/diagnóstico por imagem , Humanos , Imageamento Tridimensional/métodos , Articulação do Joelho/diagnóstico por imagem , Imageamento por Ressonância Magnética/métodos , Masculino , Menisco/anatomia & histologia , Menisco/diagnóstico por imagem , Pessoa de Meia-Idade , Projetos Piloto , Radiografia/métodos , Tíbia/anatomia & histologia , Tíbia/diagnóstico por imagemRESUMO
For product developers that design near-body products, virtual mannequins that represent realistic body shapes, are valuable tools. With statistical shape modelling, the variability of such body shapes can be described. Shape variation captured by statistical shape models (SSMs) is often polluted by posture variations, leading to less compact models. In this paper, we propose a framework that has low computational complexity to build a posture invariant SSM, by capturing and correcting the posture of an instance. The posture-normalised SSM is shown to be substantially more compact than the non-posture-normalised SSM. Practitioner summary: Statistical shape modelling is a technique to map out the variability of (body) shapes. This variability is often polluted by variations in posture. In this paper, we propose a framework to build a posture invariant statistical shape model. Abbreviations: SSM: statistical shape model; 1D: one-dimensional; 3D: three-dimensional; DHM: digital human model; LBS: linear blend skinning; PCA: princial component analysis; PC: principal component; TTR: thumb tip reach.
Assuntos
Imageamento Tridimensional/métodos , Manequins , Modelos Estatísticos , Postura , Imagem Corporal Total/métodos , HumanosRESUMO
Manual anatomical landmarking for morphometric knee bone characterization in orthopedics is highly time-consuming and shows high operator variability. Therefore, automation could be a substantial improvement for diagnostics and personalized treatments relying on landmark-based methods. Applications include implant sizing and planning, meniscal allograft sizing, and morphological risk factor assessment. For twenty MRI-based 3D bone and cartilage models, anatomical landmarks were manually applied by three experts, and morphometric measurements for 3D characterization of the distal femur and proximal tibia were calculated from all observations. One expert performed the landmark annotations three times. Intra- and inter-observer variations were assessed for landmark position and measurements. The mean of the three expert annotations served as the ground truth. Next, automated landmark annotation was performed by elastic deformation of a template shape, followed by landmark optimization at extreme positions (highest/lowest/most medial/lateral point). The results of our automated annotation method were compared with ground truth, and percentages of landmarks and measurements adhering to different tolerances were calculated. Reliability was evaluated by the intraclass correlation coefficient (ICC). For the manual annotations, the inter-observer absolute difference was 1.53 ± 1.22 mm (mean ± SD) for the landmark positions and 0.56 ± 0.55 mm (mean ± SD) for the morphometric measurements. Automated versus manual landmark extraction differed by an average of 2.05 mm. The automated measurements demonstrated an absolute difference of 0.78 ± 0.60 mm (mean ± SD) from their manual counterparts. Overall, 92% of the automated landmarks were within 4 mm of the expert mean position, and 95% of all morphometric measurements were within 2 mm of the expert mean measurements. The ICC (manual versus automated) for automated morphometric measurements was between 0.926 and 1. Manual annotations required on average 18 min of operator interaction time, while automated annotations only needed 7 min of operator-independent computing time. Considering the time consumption and variability among observers, there is a clear need for a more efficient, standardized, and operator-independent algorithm. Our automated method demonstrated excellent accuracy and reliability for landmark positioning and morphometric measurements. Above all, this automated method will lead to a faster, scalable, and operator-independent morphometric analysis of the knee.
RESUMO
Purpose: The study aims to identify differences in tibiofemoral joint morphology between responders (R group, no pain) to arthroscopic partial medial meniscectomy (APMM) versus medial postmeniscectomy syndrome patients (MPMS group, recurrent pain at 2 years postmeniscectomy) in a clinically neutrally aligned patient population. The second aim was to build a morphology-based predictive algorithm for response to treatment (RTT) in APMM. Methods: Two patient groups were identified from a large multicentre database of meniscectomy patients at 2 years of follow-up: the R group included 120 patients with a KOOS pain score > 75, and the MPMS group included 120 patients with a KOOS pain score ≤ 75. Statistical shape models (SSMs) of distal femur, proximal tibia and tibiofemoral joint were used to compare knee morphology. Finally, a predictive model was developed to predict RTT, with the SSM-derived morphologic variables as predictors. Results: No differences were found between the R and MPMS groups for patient age, sex, height, weight or cartilage status. Knees in the MPMS group were significantly smaller, had a wider femoral notch and a smaller medial femoral condyle. A morphology-based predictive model was able to predict MPMS at 2 years follow-up with a sensitivity of 74.9% (95% confidence interval [CI]: 74.4%-75.4%) and a specificity of 81.0% (95% CI: 80.6%-81.5%). Conclusion: A smaller tibiofemoral joint, a wider intercondylar notch and smaller medial femoral condyle were observed shape variations related to medial postmeniscectomy syndrome. These promising results are a first step towards a knee morphology-based clinical decision support tool for meniscus treatment. Study Design: Case-control study. Level of Evidence: Level IIIb.
RESUMO
The human nose is a complex organ that shows large morphological variations and has many important functions. However, the relation between shape and function is not yet fully understood. In this work, we present a high quality statistical shape model of the human nose based on clinical CT data of 46 patients. A technique based on cylindrical parametrization was used to create a correspondence between the nasal shapes of the population. Applying principal component analysis on these corresponded nasal cavities resulted in an average nasal geometry and geometrical variations, known as principal components, present in the population with a high precision. The analysis led to 46 principal components, which account for 95% of the total geometrical variation captured. These variations are first discussed qualitatively, and the effect on the average nasal shape of the first five principal components is visualized. Hereafter, by using this statistical shape model, two application examples that lead to quantitative data are shown: nasal shape in function of age and gender, and a morphometric analysis of different anatomical regions. Shape models, as the one presented here, can help to get a better understanding of nasal shape and variation, and their relationship with demographic data.
RESUMO
BACKGROUND: Foot morphology has received increasing attention from both biomechanics researches and footwear manufacturers. Usually, the morphology of the foot is quantified by 2D footprints. However, footprint quantification ignores the foot's vertical dimension and hence, does not allow accurate quantification of complex 3D foot shape. METHODS: The shape variation of healthy 3D feet in a population of 31 adult women and 31 adult men who live in Belgium was studied using geometric morphometric methods. The effect of different factors such as sex, age, shoe size, frequency of sport activity, Body Mass Index (BMI), foot asymmetry, and foot loading on foot shape was investigated. Correlation between these factors and foot shape was examined using multivariate linear regression. RESULTS: The complex nature of a foot's 3D shape leads to high variability in healthy populations. After normalizing for scale, the major axes of variation in foot morphology are (in order of decreasing variance): arch height, combined ball width and inter-toe distance, global foot width, hallux bone orientation (valgus-varus), foot type (e.g. Egyptian, Greek), and midfoot width. These first six modes of variation capture 92.59% of the total shape variation. Higher BMI results in increased ankle width, Achilles tendon width, heel width and a thicker forefoot along the dorsoplantar axis. Age was found to be associated with heel width, Achilles tendon width, toe height and hallux orientation. A bigger shoe size was found to be associated with a narrow Achilles tendon, a hallux varus, a narrow heel, heel expansion along the posterior direction, and a lower arch compared to smaller shoe size. Sex was found to be associated with differences in ankle width, Achilles tendon width, and heel width. Frequency of sport activity was associated with Achilles tendon width and toe height. CONCLUSION: A detailed analysis of the 3D foot shape, allowed by geometric morphometrics, provides insights in foot variations in three dimensions that can not be obtained from 2D footprints. These insights could be applied in various scientific disciplines, including orthotics and shoe design.
Assuntos
Pé/anatomia & histologia , Imageamento Tridimensional/métodos , Adolescente , Adulto , Envelhecimento/patologia , Antropometria/métodos , Índice de Massa Corporal , Feminino , Pé/diagnóstico por imagem , Pé/fisiologia , Humanos , Masculino , Pessoa de Meia-Idade , Análise de Componente Principal , Estudo de Prova de Conceito , Caracteres Sexuais , Sapatos , Esportes/fisiologia , Suporte de Carga/fisiologiaRESUMO
Human middle ears show large morphological variations. This could affect our perception of hearing and explain large variation in experimentally obtained transfer functions. Most morphological studies focus on capturing variation by using landmarks on cadaveric temporal bones. We present statistical shape analysis based on clinical cone beam CT (CBCT) scans of 100 patients. This allowed us to include surface information on the incudomallear (IM) complex (joint, ligaments and tendon not included) of 123 healthy ears with a scanning resolution of 150 µm and without a priori assumptions. Statistical shape modeling yields an average geometry for the IM complex and the variations present in the population with a high precision. Mean values, variation and correlations among anatomical features (length of manubrium, combined length of malleus head and neck, lengths of incus long and short process, enclosing angles, ossicular lever ratio, incudomallear angle, and principal moments of inertia) are reported and compared to results from the literature. Most variation is found in overall size and the angle between incus and malleus. The compact representation provided by statistical shape modeling is demonstrated and its benefits for surface modeling are discussed.