Temperature-Driven Transformation of CsPbBr3 Nanoplatelets into Mosaic Nanotiles in Solution through Self-Assembly.

Two-dimensional colloidal halide perovskite nanocrystals are promising materials for light-emitting applications. Recent studies have focused on nanoplatelets that are able to self-assemble and transform on solid substrates. However, the mechanism behind the process and the atomic arrangement of their assemblies remain unclear. Here, we present a detailed analysis of the transformation of self-assembled stacks of CsPbBr3 nanoplatelets in solution over a period of a few months by using ex situ transmission electron microscopy and surface analysis. We demonstrate that the transformation mechanism can be understood as oriented attachment, proceeding through the following steps: (i) desorption of the ligands from the surfaces of the particles, causing the seamless atomic merging of nanoplatelet stacks into nanobelts; (ii) merging of neighboring nanobelts that form more extended nanoplates; and (iii) attachment of nanobelts and nanoplates, forming objects with an atomic structure that resembles a mosaic made of broken nanotiles. We reveal that aged nanobelts and nanoplates, which are mainly stabilized by amine/ammonium ions, link through a bilayer of CsBr, with the atomic columns of neighboring perovskite lattices shifted by a half-unit-cell, forming Ruddlesden-Popper planar faults. We also show, via in situ monitoring of the nanocrystal photoluminescence combined with transmission electron microscopy analysis, that the transformation is temperature driven and that it can take place within tens of minutes in solution and in spin-coated films. Understanding this process gives crucial information for the design and fabrication of perovskite materials, where control over the type and density of defects is desired, stimulating the development of perovskite nanocrystal structures with tailored electronic properties.

Nanocrystals of Lead Chalcohalides: A Series of Kinetically Trapped Metastable Nanostructures.

We report the colloidal synthesis of a series of surfactant-stabilized lead chalcohalide nanocrystals. Our work is mainly focused on Pb4S3Br2, a chalcohalide phase unknown to date that does not belong to the ambient-pressure PbS-PbBr2 phase diagram. The Pb4S3Br2 nanocrystals herein feature a remarkably narrow size distribution (with a size dispersion as low as 5%), a good size tunability (from 7 to ∼30 nm), an indirect bandgap, photoconductivity (responsivity = 4 ± 1 mA/W), and stability for months in air. A crystal structure is proposed for this new material by combining the information from 3D electron diffraction and electron tomography of a single nanocrystal, X-ray powder diffraction, and density functional theory calculations. Such a structure is closely related to that of the recently discovered high-pressure chalcohalide Pb4S3I2 phase, and indeed we were able to extend our synthesis scheme to Pb4S3I2 colloidal nanocrystals, whose structure matches the one that has been published for the bulk. Finally, we could also prepare nanocrystals of Pb3S2Cl2, which proved to be a structural analogue of the recently reported bulk Pb3Se2Br2 phase. It is remarkable that one high-pressure structure (for Pb4S3I2) and two metastable structures that had not yet been reported (for Pb4S3Br2 and Pb3S2Cl2) can be prepared on the nanoscale by wet-chemical approaches. This highlights the important role of colloidal chemistry in the discovery of new materials and motivates further exploration into metal chalcohalide nanocrystals.

Cs3Cu4In2Cl13 Nanocrystals: A Perovskite-Related Structure with Inorganic Clusters at A Sites.

An effort to synthesize the Cu(I) variant of a lead-free double perovskite isostructural with Cs2AgInCl6 resulted in the formation of Cs3Cu4In2Cl13 nanocrystals with an unusual structure, as revealed by single-nanocrystal three-dimensional electron diffraction. These nanocrystals adopt a A2BX6 structure (K2PtCl6 type, termed vacancy ordered perovskite) with tetrahedrally coordinated Cu(I) ions. In the structure, 25% of the A sites are occupied by [Cu4Cl]3+ clusters (75% by Cs+), and the B sites are occupied by In3+. Such a Cs3Cu4In2Cl13 compound prepared at the nanoscale is not known in the bulk and is an example of a multinary metal halide with inorganic cluster cations residing in A sites. The stability of the compound was supported by density functional theory calculations that also revealed that its bandgap is direct but parity forbidden. The existence of the Cs3Cu4In2Cl13 structure demonstrates that small inorganic cluster cations can occupy A sites in multinary metal halides.

HfN Nanoparticles: An Unexplored Catalyst for the Electrocatalytic Oxygen Evolution Reaction.

Water electrolysis is one of the most promising methods to produce H2 and O2 as high potential fuels. Comparing the two half-reactions, the oxygen evolution reaction (OER) is the more difficult to be optimized and still relies on expensive noble metal-based catalysts such as Ru or Ir. In this paper, we prepared nanoparticles of HfN and Hf2 ON2 and tested them for the OER for the first time. The HfN sample, in particular, showed the highest activity, requiring an overpotential of only 358 mV at 10 mA cm-2 in Fe-free electrolyte and, above all, exhibiting long-term stability. This result places this system amongst one of the most promising catalysts for OER tested to date, in terms of sustainability, activity and stability. The prepared nanoparticles are small (less than 15 nm in diameter), well-defined in shape and crystalline, and were characterised before and after electrochemical testing also via electron microscopy (EM), powder X-ray diffraction (PXRD) and X-ray photoelectron spectroscopy (XPS).

Colloidal Synthesis of Double Perovskite Cs2AgInCl6 and Mn-Doped Cs2AgInCl6 Nanocrystals.

We show here the first colloidal synthesis of double perovskite Cs2AgInCl6 nanocrystals (NCs) with a control over their size distribution. In our approach, metal carboxylate precursors and ligands (oleylamine and oleic acid) are dissolved in diphenyl ether and reacted at 105 °C with benzoyl chloride. The resulting Cs2AgInCl6 NCs exhibit the expected double perovskite crystal structure, are stable under air, and show a broad spectrum white photoluminescence (PL) with quantum yield of ∼1.6 ± 1%. The optical properties of these NCs were improved by synthesizing Mn-doped Cs2AgInCl6 NCs through the simple addition of Mn-acetate to the reaction mixture. The NC products were characterized by the same double perovskite crystal structure, and Mn doping levels up to 1.5%, as confirmed by elemental analyses. The effective incorporation of Mn ions inside Cs2AgInCl6 NCs was also proved by means of electron spin resonance spectroscopy. A bright orange emission characterized our Mn-doped Cs2AgInCl6 NCs with a PL quantum yield as high as ∼16 ± 4%.

Role of the Crystal Structure in Cation Exchange Reactions Involving Colloidal Cu2Se Nanocrystals.

Stoichiometric Cu2Se nanocrystals were synthesized in either cubic or hexagonal (metastable) crystal structures and used as the host material in cation exchange reactions with Pb2+ ions. Even if the final product of the exchange, in both cases, was rock-salt PbSe nanocrystals, we show here that the crystal structure of the starting nanocrystals has a strong influence on the exchange pathway. The exposure of cubic Cu2Se nanocrystals to Pb2+ cations led to the initial formation of PbSe unselectively on the overall surface of the host nanocrystals, generating Cu2Se@PbSe core@shell nanoheterostructures. The formation of such intermediates was attributed to the low diffusivity of Pb2+ ions inside the host lattice and to the absence of preferred entry points in cubic Cu2Se. On the other hand, in hexagonal Cu2Se nanocrystals, the entrance of Pb2+ ions generated PbSe stripes "sandwiched" in between hexagonal Cu2Se domains. These peculiar heterostructures formed as a consequence of the preferential diffusion of Pb2+ ions through specific (a, b) planes of the hexagonal Cu2Se structure, which are characterized by almost empty octahedral sites. Our findings suggest that the morphology of the nanoheterostructures, formed upon partial cation exchange reactions, is intimately connected not only to the NC host material, but also to its crystal structure.

Fluorescence Concentric Triangles: A Case of Chemical Heterogeneity in WS2 Atomic Monolayer.

We report a novel optical property in WS2 monolayer. The monolayer naturally exhibits beautiful in-plane periodical and lateral homojunctions by way of alternate dark and bright band in the fluorescence images of these monolayers. The interface between different fluorescence species within the sample is distinct and sharp. This gives rise to intriguing concentric triangular fluorescence patterns in the monolayer. The novel optical property of this special WS2 monolayer is facilitated by chemical heterogeneity. The photoluminescence of the bright band is dominated by emissions from trion and biexciton while the emission from defect-bound exciton dominates the photoluminescence at the dark band. The discovery of such concentric fluorescence patterns represents a potentially new form of optoelectronic or photonic functionality.

Colloidal Synthesis of Quantum Confined Single Crystal CsPbBr3 Nanosheets with Lateral Size Control up to the Micrometer Range.

We report the nontemplated colloidal synthesis of single crystal CsPbBr3 perovskite nanosheets with lateral sizes up to a few micrometers and with thickness of just a few unit cells (i.e., below 5 nm), hence in the strong quantum confinement regime, by introducing short ligands (octanoic acid and octylamine) in the synthesis together with longer ones (oleic acid and oleylamine). The lateral size is tunable by varying the ratio of shorter ligands over longer ligands, while the thickness is mainly unaffected by this parameter and stays practically constant at 3 nm in all the syntheses conducted at short-to-long ligands volumetric ratio below 0.67. Beyond this ratio, control over the thickness is lost and a multimodal thickness distribution is observed.

Defect Engineering and Emission Tuning of Wide-Bandgap MAPbCl3 Perovskite.

Lead-chloride perovskites are promising candidates for optoelectronic applications, such as visible-blind UV photodetection. It remains unclear how the deep defects in this wide-bandgap material impact the carrier recombination dynamics. In this work, we study the defect properties of MAPbCl3 (MA = CH3NH3) based on photoluminescence (PL) measurements. Our investigations show that apart from the intrinsic emission, four sub-bandgap emissions emerge, which are very likely to originate from the radiative recombination of excitons bound to several intrinsic vacancy and interstitial defects. The intensity of various emission features can be tuned by adjusting the type and ratio of precursors used during synthesis. Our study not only provides important insights into the defect property and carrier recombination mechanism in this class of material but also demonstrates efficient strategies for defect passivation and engineering, paving the way for further development of lead-chloride perovskite-based optoelectronic devices.

Real-Time In Situ Observation of CsPbBr3 Perovskite Nanoplatelets Transforming into Nanosheets.

The manipulation of nano-objects through heating is an effective strategy for inducing structural modifications and therefore changing the optoelectronic properties of semiconducting materials. Despite its potential, the underlying mechanism of the structural transformations remains elusive, largely due to the challenges associated with their in situ observations. To address these issues, we synthesize temperature-sensitive CsPbBr3 perovskite nanoplatelets and investigate their structural evolution at the nanoscale using in situ heating transmission electron microscopy. We observe the morphological changes that start from the self-assembly of the nanoplatelets into ribbons on a substrate. We identify several paths of merging nanoplates within ribbons that ultimately lead to the formation of nanosheets dispersed randomly on the substrate. These observations are supported by molecular dynamics simulations. We correlate the various paths for merging to the random orientation of the initial ribbons along with the ligand mobility (especially from the edges of the nanoplatelets). This leads to the preferential growth of individual nanosheets and the merging of neighboring ones. These processes enable the creation of structures with tunable emission, ranging from blue to green, all from a single material. Our real-time observations of the transformation of perovskite 2D nanocrystals reveal a route to achieve large-area nanosheets by controlling the initial orientation of the self-assembled objects with potential for large-scale applications.

Laser-Induced Morphological and Structural Changes of Cesium Lead Bromide Nanocrystals.

Metal halide perovskite nanocrystals, an emerging class of materials for advanced photonic and optoelectronic applications, are mainly fabricated with colloidal chemistry routes. On the quest for new properties according to application needs, new perovskite systems of various morphologies and levels of doping and alloying have been developed, often also involving post-synthesis reactions. Recently, laser irradiation in liquids has been utilized as a fast method to synthesize or transform materials and interesting laser-induced transformations on nanocrystals were induced. These studies in general have been limited to small nanocrystals (~15 nm). In the case of halide perovskites, fragmentation or anion exchange have been observed in such laser-based processes, but no crystal structure transformations were actually observed or deliberately studied. Nanocrystals are more sensitive to light exposure compared to the corresponding bulk crystals. Additional factors, such as size, morphology, the presence of impurities, and others, can intricately affect the photon absorption and heat dissipation in nanocrystal suspensions during laser irradiation. All these factors can play an important role in the final morphologies and in the time required for these transformations to unfold. In the present work, we have employed a 513 nm femtosecond (fs) laser to induce different transformations in large nanocrystals, in which two phases coexist in the same particle (Cs4PbBr6/CsPbBr3 nanohexagons of ~100 nm), dispersed in dichlorobenzene. These transformations include: (i) the exfoliation of the primary nanohexagons and partial anion exchange; (ii) fragmentation in smaller nanocubes and partial anion exchange; (iii) side-by-side-oriented attachment, fusion, and formation of nanoplatelets and complete anion exchange; (iv) side-by-side attachment, fusion, and formation of nanosheets. Partial or complete Br-Cl anion exchange in the above transformations was triggered by the partial degradation of dichlorobenzene. In addition to the detailed analysis of the various nanocrystal morphologies observed in the various transformations, the structure-photoluminescence relationships for the different samples were analyzed and discussed.

Detection of Pb2+ traces in dispersion of Cs4PbBr6 nanocrystals by in situ liquid cell transmission electron microscopy.

The Cs4PbBr6 nanocrystals are often used as a starting material for the preparation of green-emitting CsPbBr3 perovskite nanocrystals by means of chemical and physical transformations. Herein, we probe the Cs4PbBr6 nanocrystals dispersed in a solvent by liquid cell transmission electron microscopy (LCTEM). The nanocrystal dispersion in toluene is placed between two electron-transparent membranes separated by a gold spacer in a liquid cell and studied in a high angular annular dark-field scanning TEM mode with a fixed electron dose rate. We observe the spontaneous nucleation and growth of round and dendrite-shaped nanoparticles under electron beam illumination in the areas of solution where no Cs4PbBr6 nanocrystals are seen. These newly-formed nanoparticles show high contrast and contain Pb as the only heavy element, suggesting that they are made from metallic lead and indicating Pb2+-containing species in solution as their precursor. Also, a small amount of Au0 nanoparticles are formed, most likely due to the dissolution of the gold spacer by free Br-containing species in the nanocrystal dispersion and a subsequent reduction of the leached species under the electron beam. The analysis of the UV-Vis absorption spectra of Cs4PbBr6 nanocrystals and the supernatant isolated from the synthesis points to mixed lead(ii) oleate/bromide species as the likely residue, corroborating LCTEM results. The identification of the residual precursors in Cs4PbBr6 nanocrystal samples after the post-synthetic isolation is an important task because the residues may alter the subsequent reactivity of the nanocrystals.

Ultrathin NiSe Nanosheets on Ni Foam for Efficient and Durable Hydrazine-Assisted Electrolytic Hydrogen Production.

Hydrazine-assisted electrochemical water splitting is an important avenue toward low cost and sustainable hydrogen production. An efficient and stable bifunctional electrocatalyst for the hydrogen evolution reaction (HER) and the anodic hydrazine oxidation reaction (HzOR) is fundamental to this goal. Herein, we employed a facile method to fabricate ultrathin NiSe nanosheet arrays on nickel foam (NiSe/NF), which exhibits predominant electrocatalytic activity for both HER and HzOR. Our investigations revealed that the excellent electrocatalytic activity of the NiSe/NF mainly arises from the abundant electrocatalytic active sites endowed by the ultrathin nanosheet morphology, the rugged feature of the extended (100) nanosheet surface, the rich presence of Se on the nanosheet surface, and the three-dimensional (3D) porous structure of the NF and other factors such as high conductivity of the NiSe/NF and strong NiSe-NF adhesion. We assembled a hydrazine-boosted electrochemical water splitting cell using NiSe/NF as a bifunctional catalyst for both of the electrodes, and the constructed cell exhibits an ultralow overpotential (310 mV at 10 mA cm-2), which is robust for 30 h continuous electrolysis in a 1 M KOH electrolyte. This work provides a promising avenue toward low cost, high-efficiency, and stable hydrogen production based on hydrazine-assisted electrolytic water splitting for future.

Correction: Transforming colloidal Cs4PbBr6 nanocrystals with poly(maleic anhydride-alt-1-octadecene) into stable CsPbBr3 perovskite emitters through intermediate heterostructures.

[This corrects the article DOI: 10.1039/D0SC00738B.].

Towards enhanced sodium storage of anatase TiO2via a dual-modification approach of Mo doping combined with AlF3 coating.

Recent studies on anatase TiO2 have demonstrated its capability of performing as an anode material for sodium-ion batteries (SIBs) even though, due to poor conductivity, realistic applications have not yet been foreseen. In order to try to address this issue, herein, we shall introduce a cost effective and facile route based on the co-precipitation method for the synthesis of Mo-doped anatase TiO2 nanoparticles with AlF3 surface coating. The electrochemical measurements demonstrate that the Mo-doped anatase TiO2 nanoparticles deliver an ∼40% enhanced reversible capacity compared to pristine TiO2 (139.8 vs. 100.7 mA h g-1 at 0.1 C after 50 cycles) due to an improved electronic/ionic conductivity. Furthermore, upon AlF3 coating, the overall system can deliver a much higher reversible capacity of 178.9 mA h g-1 (∼80% increase with respect to pristine TiO2) with good cycling stability and excellent rate capabilities of up to 10 C. The experimental results indicate that the AlF3 surface coating could indeed effectively reduce the solid electrolyte interfacial resistance, enhance the electrochemical reactivity at the surface/interface region, and lower the polarization during cycling. The improved performance achieved using a cost-effective fabrication approach makes the dually modified anatase TiO2 a promising anode material for high-performance SIBs.

Transforming colloidal Cs4PbBr6 nanocrystals with poly(maleic anhydride-alt-1-octadecene) into stable CsPbBr3 perovskite emitters through intermediate heterostructures.

The preparation of strongly emissive CsPbBr3 perovskite nanocrystals with robust surface passivation is a challenge in the field of lead halide perovskite nanomaterials. We report an approach to prepare polymer-capped CsPbBr3 perovskite nanocrystals by reacting oleylammonium/oleate-capped Cs4PbBr6 nanocrystals with poly(maleic anhydride-alt-1-octadecene) (PMAO). PMAO contains succinic anhydride units that are reactive towards the oleylamine species present on the Cs4PbBr6 nanocrystals' surface and produces polysuccinamic acid, which, in turn, triggers the Cs4PbBr6 to CsPbBr3 conversion. The transformation occurs through the formation of Cs4PbBr6-CsPbBr3 heterostructures as intermediates, which are captured because of the mild reactivity of PMAO and are investigated by high-resolution electron microscopy. The Cs4PbBr6-CsPbBr3 heterostructures demonstrate a dual emission at cryogenic temperature with an indication of the energy transfer from Cs4PbBr6 to CsPbBr3. The fully-transformed CsPbBr3 NCs have high photoluminescence quantum yield and enhanced colloidal stability, which we attribute to the adhesion of polysuccinamic acid to the NC surface through its multiple functional groups in place of oleate and alkylammonium ligands. The PMAO-induced transformation of Cs4PbBr6 NCs opens up a strategy for the chemical modification of metal halide NCs initially passivated with nucleophilic amines.

Metastable CdTe@HgTe Core@Shell Nanostructures Obtained by Partial Cation Exchange Evolve into Sintered CdTe Films Upon Annealing.

Partial Hg2+ → Cd2+ cation exchange (CE) reactions were exploited to transform colloidal CdTe nanocrystals (NCs, 4-6 nm in size) into CdTe@HgTe core@shell nanostructures. This was achieved by working under a slow CE rate, which limited the exchange to the surface of the CdTe NCs. In such nanostructures, when annealed at mild temperatures (as low as 200 °C), the HgTe shell sublimated or melted and the NCs sintered together, with the concomitant desorption of their surface ligands. At the end of this process, the annealed samples consisted of ligand-free CdTe sintered films containing an amount of Hg2+ that was much lower than that of the starting CdTe@HgTe NCs. For example, the CdTe@HgTe NCs that initially contained 10% of Hg2+, after being annealed at 200 °C were transformed to CdTe sintered films containing only traces of Hg2+ (less than 1%). This procedure was then used to fabricate a proof-of-concept CdTe-based photodetector exhibiting a photoresponse of up to 0.5 A/W and a detectivity of ca. 9 × 104 Jones under blue light illumination. Our strategy suggests that CE protocols might be exploited to lower the overall costs of production of CdTe thin films employed in photovoltaic technology, which are currently fabricated at high temperatures (above 350 °C), using post-process ligand-stripping steps.

Compositional Tuning of Carrier Dynamics in Cs2Na1-x Ag x BiCl6 Double-Perovskite Nanocrystals.

We devised a hot-injection synthesis to prepare colloidal double-perovskite Cs2NaBiCl6 nanocrystals (NCs). We also examined the effects of replacing Na+ with Ag+ cations by preparing and characterizing Cs2Na1-x Ag x BiCl6 alloy NCs with x ranging from 0 to 1. Whereas Cs2NaBiCl6 NCs were not emissive, Cs2Na1-x Ag x BiCl6 NCs featured a broad photoluminescence band at ∼690 nm, Stokes-shifted from the respective absorption by ≥1.5 eV. The emission efficiency was maximized for low Ag+ amounts, reaching ∼3% for the Cs2Na0.95Ag0.05BiCl6 composition. Density functional theory calculations coupled with spectroscopic investigations revealed that Cs2Na1-x Ag x BiCl6 NCs are characterized by a complex photophysics stemming from the interplay of (i) radiative recombination via trapped excitons localized in spatially connected AgCl6-BiCl6 octahedra; (ii) surface traps, located on undercoordinated surface Bi centers, behaving as phonon-assisted nonradiative decay channels; and (iii) a thermal equilibrium between trapping and detrapping processes. These results offer insights into developing double-perovskite NCs with enhanced optoelectronic efficiency.

The effect of silver oxidation on the photocatalytic activity of Ag/ZnO hybrid plasmonic/metal-oxide nanostructures under visible light and in the dark.

A new synergetic hybrid Ag/ZnO nanostructure was fabricated which is able to cause photocatalytic degradation (in high yields) of methylene blue under visible light as well as in the dark. In this nanostructure, ZnO was synthesized using the arc discharge method in water and was coupled with Ag via a chemical reduction method. X-ray photoelectron spectroscopy (XPS) and photoluminescence spectroscopy results confirmed the existence of defects in ZnO in the hybrid nanostructures; these defects act as electron traps and inhibit the recombination of electron-hole pairs. The absorption edge of the hybrid nanostructure shifts toward the visible region of the spectrum due to a combination of the Ag plasmonic effect and the defects in ZnO. Band-edge tuning causes effective visible light absorption and enhances the dye degradation efficiency of Ag/ZnO nanostructures. Silver oxidation in the hetero-structure changed the metal-semiconductor interface and suppressed the plasmonic enhancement. Nevertheless, the synthesized Ag/ZnO decomposed methylene blue in visible light, and the silver oxidation only affected the catalytic activity in the dark. This work provides insight into the design of a new and durable plasmonic-metal oxide nanocomposite with efficient dye degradation even without light illumination.

CsPbX3/SiOx (X = Cl, Br, I) monoliths prepared via a novel sol-gel route starting from Cs4PbX6 nanocrystals.

We developed a facile synthesis of nanocomposite powders of CsPbX3 nanocrystals (NCs) embedded in silica. The synthesis starts from colloidal Cs4PbX6 NCs that are mixed with tetraethyl orthosilicate in the presence of nitric acid, which triggers the sol-gel reaction yielding the formation of SiOx and the conversion of starting NCs into CsPbX3 ones. The overall reaction delivers CsPbX3 NCs encased in a silica matrix. The resulting CsPbX3/SiOx nano-composite powders exhibited enhanced moisture and thermal stability in air. Also, when mixing different CsPbX3/SiOx samples having diverse anion compositions, no interparticle anion exchange processes were observed, which is a further indication that the silica matrix acts as a robust barrier surrounding the NCs. Finallly, we used these composites as down-converter phosphors on top of a blue light-emitting diode (LED), delivering nearly ideal white light emission with the Commission Internationale de l'Eclairage (CIE) color coordinates (0.32, 0.33).