Kinetic study of hydrogen lateral diffusion at high temperature in a directly-bonded InP-SiO2/Si substrate.

Hybrid integration of III-V materials onto silicon by direct bonding technique is a mature and promising approaches to develop advanced photonic integrated devices into the silicon photonics platform. In this approach, the III-V material stack is grown on an InP wafer in a unique epitaxial step prior to the direct bonding process onto the silicon-on-insulator wafer. Currently, no additional epitaxial regrowth steps are implemented after bonding. This can be seen as a huge limitation as compared to the III-V on III-V wafer mature technology where multi-regrowth steps are most often implemented. In this work, we have studied the material behavior of an InP membrane on silicon (InPoSi) under epitaxial regrowth conditions by metal-organic vapor phase epitaxy (MOVPE). MOVPE requires high-temperature elevation, typically above 600 °C. We show for the first time the appearance of voids at 400 °C in an InP seed (100 nm) directly-bonded onto a thermally oxidized Si substrate despite the use of a thick SiO2 oxide (200 nm) at the bonding interface. This phenomenon is explained by a weakening of the bonding interface while high-pressurized hydrogen is present. A kinetic study of the hydrogen lateral diffusion is carried out, enabling the assessment of its lateral diffusion length. To overcome the void formation, highly efficient outgassing trenches after bonding are demonstrated. Finally, high-quality AlGaInAs-based multi-quantum well (MQW) heterostructure surrounded by two InP layers was grown by MOVPE on InPoSi template patterned with outgassing trenches. This process is not only compatible with MOVPE regrowth conditions (650 °C under PH3) but also with conventional fabrication processes used for photonic devices.

Near-field analysis of metallic DFB lasers at telecom wavelengths.

We image in near-field the transverse modes of semiconductor distributed feedback (DFB) lasers operating at λ ≈ 1.3 µm and employing metallic gratings. The active region is based on tensile-strained InGaAlAs quantum wells emitting transverse magnetic polarized light and is coupled via an extremely thin cladding to a nano-patterned gold grating integrated on the device surface. Single mode emission is achieved, which tunes with the grating periodicity. The near-field measurements confirm laser operation on the fundamental transverse mode. Furthermore--together with a laser threshold reduction observed in the DFB lasers--it suggests that the patterning of the top metal contact can be a strategy to reduce the high plasmonic losses in this kind of systems.

In situ generation of surface plasmon polaritons using a near-infrared laser diode.

We demonstrate a semiconductor laser-based approach which enables plasmonic active devices in the telecom wavelength range. We show that optimized laser structures based on tensile-strained InGaAlAs quantum wells-coupled to integrated metallic patternings-enable surface plasmon generation in an electrically driven compact device. Experimental evidence of surface plasmon generation is obtained with the slit-doublet experiment in the near-field, using near-field scanning optical microscopy measurements.

A hybrid electroabsorption modulator device for generation of high spectral-efficiency optical modulation formats.

We report a novel hybrid integrated optic device consisting of AlGaInAs/InP electroabsorption modulators and a four-arm silica-on-silicon planar lightwave circuit optical interferometer. The device is designed for generation of high spectral efficiency optical modulation formats. We demonstrate generation of 21.4 Gb/s quadrature phase shift keyed optical signals with electrical data drives of 2V(pp) amplitudes, achieving a bit error rate of 10(-9) with the required optical signal to noise ratio of ~18 dB in a 0.1 nm resolution bandwidth.

All-optical extinction-ratio enhancement of a 160 GHz pulse train by a saturable-absorber vertical microcavity.

A vertical-access passive all-optical gate has been used to improve the extinction ratio of a 160 GHz pico-second pulse train at 1555 nm. An extinction ratio enhancement of 6 dB is observed within an 8 nm bandwidth. Such a device is a promising candidate for low-cost all optical reamplication and reshaping (2R) regeneration at 160 Gbits/s.